Creation and Change date in T Tables

Hi
When entries are made in SAP tables like T001  , T001L ,T001W etc. Creation of company code, plant is there a creation date , change date maintained ?
Where can i retrieve this information from? Preferbly an SAP table
-Dexter

The dates are recorded in tables only if the "Log data changes" checkbox in SE11->Table display -> Technical settings is checked.
The logs are maintained as documents in CDPOS and CDHDR maintains the date and time.
If you are creating a Z-Table and want to have such a log, you can create timestamp fields (date and time) and modify at runtime during database update.
Hope this helps!
Cheers,
Shailesh.

Similar Messages

  • Creation and Change Date for Tcode and Function Groups

    Hello All,
    I need to display the Creation and Change Dates for Custom Tcodes and Function Groups in a Report. Can anyone please let me know the logic of retrieving it.
    regards,
    Mahesh

    Hi,
    TADIR and TRDIR is the tables where you can find all these data
    Regards
    Sudheer

  • How to trigger an Idoc from Sales order creation and change

    We are trying to trigger Idoc from sales order creation and change we have done following setting mentioned below:
    Follow the below steps:
    1. Go to NACE transaction
    2. Select V1 application and select OUTPUT TYPES
    3. Select the required output type and double click on Processing routines.
    4. Enter Medium as DISTRIBUTION ALE, Program as RSNASTED and Routine as ALE_PROCESSING.
    5. Save it.
    message type ORDERSP in the distribution model (BD64).
    Follow the below steps to configure the condition records:
    1. Go to NACE
    2. Select V1 application and select CONDITION RECORDS
    3. Select the requred output type and click on Condition records
    4. Selection screen will be displayed.
    5. Go for execution. In that screen enter the selection criteria. For eg Condition record is based on Sales document type. Then
    Sales doc type = OR
    Funt = SP
    Partner = blank. It means there is no restriction on partner numbers.
    Medium = A
    date/time = 4
    Lan = EN.
    Note: partner is left blank means, the sales order of type OR can be send to all partners.
    6. Save it.
    We also done ALE configuration.
    We are facing problem that from VA02 "No output has been selected for printing Message no. V1102"
    Kindly suggest the solution.
    Regards,
    Sharad Dixit

    Hi ,
    Please check the total error description and diagnosis as below :
    InVa02 enter SO  go to extras->output->Header->edit.You can find a table with all the triggered output types. Choose the output type BA00 with medium Distribution ALE and go for 'Processing log'. It will show you the error description.
    Please paste the diagnosis .
    Thanks and Regards,
    P.Bharadwaj

  • Finding Plant Creation and Updation Date

    Hi all,
    I just want to find out if it is possible to find out Plant Creation and Updation Date using ABAP statements. Does it get stored in CHDHR or CDPOS and if yes, then what is the object Key.
    Thanks

    Check Report RSVTPROT with table name T001W for Plant changes. I do not think it updated CDHDR.
    You can SUBMIT this report and get back the list in your custom program.
    How to get list back in your custom program refer
    http://scn.sap.com/thread/3147016

  • Approaches to transfer changed data from a table to another table

    Hello expert,
    will you please show me all approaches to automatically detect and transfer changed data from a table to another table ? I don't need detail information, but a little comment for those approaches are more welcome.
    Many Thanks,
    Edited by: 843178 on 19-Dec-2011 2:04 PM

    You will want to review information on replication and similar methods
    In a nutshell:
    Replication allowed data to exist at more than one site and take the Master / original table data and clone it at a different site
    As tranporting all of the table data to a remote / clone site got more and more expensive we developed a method
    to identify just the 'diffs' and only send those from the master to the clone which needed only the diffs to become a clone of the master table
    This has many methods and options, but looking under key words such as
    - distributed transations
    - materialized views
    - replication
    ... are a few categories that will get you started

  • Error While enahling CDC(Change data capture) on Table.

    I am enabling Change data capture (CDC) on SQL server 2012 Enterprise edition(11.0.2100.60)
    . I am able to enable it on Database level with below SQL, but failed to enable on Table level.
    Use DatabaseName
    GO
    Exec sys.sp_cdc_enable_db 
    GO
    EXEC sys.sp_cdc_enable_table @source_schema = N'dbo',
                @source_name = N'TableName', @role_name = NULL
    GO
    Got Error like,
    'msg 22832, Level 16, State 1, Procedure sp_cdc_enable_table_internal, Line 623
    Could not update the metadata that indicates table [dbo].[TableName] is enabled for Change Data Capture. 
    The failure occurred when executing the command '[sys].[sp_cdc_add_job] @job_type = N'capture''. 
    The error returned was 22836: 'Could not update the metadata for database DatabaseName to indicate that a Change Data Capture job has been added. 
    The failure occurred when executing the command 'sp_add_jobstep_internal'. 
    The error returned was 14234: 'The specified '@server' is invalid (valid values are returned by sp_helpserver).'. 
    Use the action and error to determine the cause of the failure and resubmit the request.'. 
    Use the action and error to determine the cause of the failure and resubmit the request.'
    Would anyone help me to out of this?
    Thanks in advance..!!

    Related thread:
    http://social.technet.microsoft.com/Forums/sqlserver/en-US/fa0c2a52-63b5-4a39-9f35-fe6f0eb21d1d/change-data-capture-on-table?forum=sqldatawarehousing
    Make sure SQL Server Agent is running.
    Kalman Toth Database & OLAP Architect
    SQL Server 2014 Design & Programming
    New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

  • How to change data in decision table using excel file in operating system?

    Hello, BRF Experts
    I now brf + for the first time in the current project is being developed.
    Now, project has been facing a big problem.
    Develop system that was developed in the history of decision table in the operating system can be used to update excel file, etc. I do not know whether.
    So, I was tested, but can not change data in decision table.
    [ error message : system is not change allowed ].
    The operating system itself to the current system setting is immutable and check it
    : changes and transports for client-specific object -> no changed allowed
    : cross-client object changes -> no changes to repository and cross-client customizing object.
    Decision table in the operating system can update the details if I want to know what to do.
    Maintenance view can be modified in the operating system as a decision table, I wonder if you can create a view.
    Edited by: Sung-Wook Ha on Jan 13, 2012 2:02 PM

    Hi ,
    Exchanging data with Microsoft Excel is done with the help of the XML-based file format (file extension .XSLX) introduced with Microsoft Excel 2007. If you are using an older version of Microsoft Office, you can download the Microsoft Office Compatibility Pack to upgrade the supported file formats from the Microsoft Download Center ([Exchanging Decision Table Data With Microsoft Excel |http://www.microsoft.com/downloads/details.aspx?familyid=941b3470-3ae9-4aee-8f43-c6bb74cd1466]). Once you have downloaded the Compatibility Pack, you have to install it on every workstation that has an older version of Microsoft Office installed.
    Please refer the link-
    [BRFplus-Data exchange with MS Office 2007|http://help.sap.com/erp2005_ehp_05/helpdata/en/b8/e03486d1df48c6baa3c4354f5198ee/frameset.htm]
    Hope this helps.
    Thanks,
    Ajay

  • Creation and change customer master in same LSMW

    Hi Experts,
    I have a created customer master uploading using batch input recording in lsmw.
    Now i have scenario like if the customer already exists i need to change that customer accordingly.
    I hope most of u would have come across such issue,for time being i tried makin 2 recordings for creation(XD01) and change(XD02)
    after assigning 2 structures for each creation and change, but i don know where to check whether the customer already exists and how to skip respective recordings....
    Pl suggest steps after this, if this one correct........
    Or if there any alter method pl do suggest me..
    Pts will rewarded immly.
    Regards,
    Dilip

    Hi,
    In the begin of record, you can check whether a cust already exist in the system. Based upon the result you can change the Tab Name and Tcode.
    Just give this a try.
    Rehards,
    Lalit

  • IDoc Configuration for Production Order Creation and Change

    Hi All,
    Please Help me out for IDoc Configuration for Production Order Creation and Change
    I have found the IDoc for Production Order
    Messgae Type : LOIPRO and IDoc type : LOIPRO01
    Actually my requirment is to send the (LOIPRO01 )IDoc from SAP R/3 to XI system ,when ever the Production Order Created and Changed,
    I have done following Configurations:
    1. RFC Destination created for XI system
    2. PORT was created for XI
    3. Partner profile created WE20 and LOIPRO01 IDoc is added in OutBound Perameter.
    I need to know how to do the followning.
    1. How do i configure the outbound Production order idocs when Production Order is created or changed.
    2. in NACE (Output control) which is the Application for Production Order.
    3. How can I set IDoc as output Type for Production Order Creation.
    Thanks in advance
    Dhanabal T

    Hi Michal,
    I know that it is the old thread but still want to get clarified from you out of curiosity.
    Unlike other IDOC, i actiavated change pointers for LOIPRO
    1.message and idoc type is linked
    2.function module , message type , idoc type is linked
    function module used is CLOI_MASTERIDOC_CREATE_LOIPRO
    3.BD64, distribution model is created and distributed
    4. port and partner profile is in place.
    5. IDOC is not getting generated after creating the process order.
    do we need to activate the change documents for the message type in BD52,
    if yes can you please provide the object types for the same.
    or i am missing something else. please guide me in this regards.
    Thanks in advance for your time.
    S.Janagar

  • Creating a external content type for Read and Update data from two tables in sqlserver using sharepoint designer

    Hi
    how to create a external content type for  Read and Update data from two tables in  sqlserver using sharepoint designer 2010
    i created a bcs service using centraladministration site
    i have two tables in sqlserver
    1)Employee
    -empno
    -firstname
    -lastname
    2)EmpDepartment
    -empno
    -deptno
    -location
    i want to just create a list to display employee details from two tables
    empid firstname deptno location
    and same time update  in two tables
    adil

    When I try to create an external content type based on a view (AdventureWorks2012.vSalesPerson) - I can display the data in an external list.  When I attempt to edit it, I get an error:
    External List fails when attached to a SQL view        
    Sorry, something went wrong
    Failed to update a list item for this external list based on the Entity (External Content Type) 'SalesForce' in EntityNamespace 'http://xxxxxxxx'. Details: The query against the database caused an error.
    I can edit the view in SQL Manager, so it seems strange that it fails.
    Any advice would be greatly GREATLY appreciated. 
    Thanks,
    Randy

  • My iPhone 4 is Turning of and changing dates. How I can solve it?

    My iPhone 4 is turning off and changing dates Aline also. How I can fix it ?

    If the basics from the User Guide have all been tried (restart, reset, restore from backup, restore as new) and you still have problems, then you've done all the troubleshooting you can do.  You'll need to bring your phone into Apple or an authorized service provider in your area.

  • PR Creation and Change

    Dear All,
                     I want to put a control in the Purchase requisition creation and change ME51N and ME52N any standard user exit  available for this?..
    if available kindly send me the user exit name. We have already tried with the user Exit M06B0002 under function exit
    EXIT_SAPLEBND_001 but this is not suitable in ME52N
    Any other standard user exit available.
    Kindly give your valuable help on this
    Thanka in advance.
    Regards
    P.Anandhakumar...

    The Item Category B is a Limit PO, which means it is a value limit. so there is no need for a qty - So, it was greyed.
    The currency which is brought from the Vendor, so if you want to change - then do it from the Vendor - so it was greyed.
    The UOM will be a activity, since the PO was value based - so it was greyed out.
    This is a standard of SAP.

  • Authorization control on material reservation creation and change (MB21 & M

    Hi Friends
    Please help me to find a solution on Authorization control on material reservation creation and change (MB21 & MB23).
    Client looking for a control over end user on those T.Code s but not at T.Code level;
    Client looking for control either based on "Storage location" and/or u201CProduct hierarchyu201D.
    More specifically, user A and B both can Create/Change MR but user A only can do it for the MR which related to storage location say YY while B authorized for storage location ZZ
    Thanks in advance.

    Hello Partha,
    Only available Standard SAP Authorization Objects, related to Reservations, are M_MRES_BWA (Reservations: Movement Type) & M_MRES_WWA (Reservations: Plant) where you can maintain authorizations based on Movement Type & Plant respectively and hence seggested enhancement.
    You can use Tcode-SUIM to search for Basis authorization details i.e. Roles defined for specific transaction/authorization object / profiles.
    Revert if any further info required.
    Regards,
    Anup

  • Export Contact with creation and modify date

    Hi All,
    I need to export the contact created in AD ( windows 2008 )with creation and modified date.

    Hi Vin,
    In addition,
    the following thread can be referred to as reference.
    Exporting AD Objects by creation date
    http://social.technet.microsoft.com/Forums/en-US/d8fd00ba-e97a-4e28-a67a-1d56bfddd554/exporting-ad-objects-by-creation-date?forum=winserverDS
    Best regards,
    Frank Shen

  • Help with writing and retrieving data from a table field with type "LCHR"

    Hi Experts,
    I need help with writing and reading data from a database table field which has a type of "LCHR". I have given an example of the original code but don't know what to change it to in order to fix it and still read in the original data that's stored in the LCHR field.
    Basically we have two Function modules, one that saves list data to a database table and one that reads in this data. Both Function modules have an identicle table which has an array of fields from type INT4, CHAR, and type P. The INT4 field is the first one.
    Incidentally this worked in the 4.7 non-unicode system but is now dumping in the new ECC6 Unicode system.
    Thanks in advance,
    C
    SAVING THE LIST DATA TO DB
    DATA: L_WA(800).
    LOOP AT T_TAB into L_WA.
    ZDBTAB-DATALEN = STRLEN( L_WA ).
    MOVE: L_WA to ZDBTAB-RAWDATA.
    ZDBTAB-LINENUM = SY-TABIX.
    INSERT ZDBTAB.
    READING THE DATA FROM DB
    DATA: BEGIN OF T_DATA,
                 SEQNR type ZDBTAB-LINENUM,
                 DATA type ZDBTAB-RAWDATA,
               END OF T_TAB.
    Select the data.
    SELECT linenum rawdata from ZDBTAB into table T_DATA
         WHERE repid = w_repname
         AND rundate = w_rundate
         ORDER BY linenum.
    Populate calling Internal Table.
    LOOP AT T-DATA.
    APPEND T_DATA to T_TAB.
    ENDLOOP.

    Hi Anuj,
    The unicode flag is active.
    When I run our report and then to try and save the list data a dump is happening at the following point
    LOOP AT T_TAB into L_WA.
    As I say, T_TAB consists of different fields and field types whereas L_WA is CHAR 800. The dump mentions UC_OBJECTS_NOT_CONVERTIBLE
    When I try to load a saved list the dump is happening at the following point
    APPEND T_DATA-RAWDATA to T_TAB.
    T_DATA-RAWDATA is type LCHR and T_TAB consists of different fields and field types.
    In both examples the dumps mention UC_OBJECTS_NOT_CONVERTIBLE
    Regards
    C

Maybe you are looking for

  • What do I do when my iTunes library won't let me delete a TV show?

    I was downloading a TV show in HD and then realised that I could get it in SD, which is preferable to me. Through reading someone else's posting, I now know how to download the SD version, but my library is refusing to let me delete the ones that wer

  • Ran Disk Utility but got a few errors!!

    What does this mean? Checking catalog file. Missing thread record (id = 529646) Missing thread record (id = 995646) Missing thread record (id = 1016399) Missing thread record (id = 1043935) Missing thread record (id = 1924369) Checking multi-linked f

  • Nested linked files - how to update?

    I'm just getting started with placing linked files to create a composite form.  I have created phone fields, e-mail field, address block field, etc.  I then want to compose intermediate sections like "patient info" and "insurance info".  Finally I ha

  • Creative cloud keeps crashing after trying to add a new font?

    I recently tried to add a new font to my library with typekit. As soon as the download was complete, at the point where it should have synched, my creative cloud crashed. Now, i can still start creative cloud, and i can even get to the primary menu,

  • Us Planning Function to Update BPS Variable

    I have read through several 'How To' papers on variables, but did not come across this.  Is it possible to develop a planning function (FOX or User Exit) to prgramatically read and then update a BPS variable?