Creation of BC set for ECATT
Hello,
I have created a ECATT for master data uploading. This created a request number. Now when I am trying to create a BC set using tcode SCPR3 and attaching the above created request it is giving me the following error:-
Message Number: S_CUS_IMG_ACTIVITY230
Diagnosis
Logical object ECAT is a lockable (TADIR-mandatory) object.
System Response
Lockable objects cannot be included in BC sets because, during the activation process, an entry would have to be written in the catalog of repository objects (table TADIR). However, this is not possible with BC sets.
Procedure
The object cannot be used in BC sets.
Kindly guide me as to how do i resolve this error and attach my Ecatt request in the BC set.
Narendra
Creation of BC set for ECATT
Hi,
Check if this process helps u.
Procedure
Aassign existing preconfiguration, transactions or rReports
1. Go to the structure element to which you want to assign preconfiguration, in the project structure.
2. Choose BC Set, CATT, eCATT Test Configuration, Transaction, Program or Add-On Transport Request, in the Type column.
3. If it is not a process step, enter a component from the possible entries help in the Component field.
4. Make an entry in the Object column, or choose from the possible entries help for the Object field.
5. Save your entries.
Assign IMG objects
1. Go to the structure element in the reference structure to which you want to assign an IMG object.
2. Choose IMG Object in the Type field.
3. If it is not a process step, enter a component from the possible entries help in the Component field.
4. Call the possible entries help for the Object field. You go to the Implementation Guide (IMG) of the selected component system.
5. Choose one or more IMG object nodes and choose Select.
6. Choose Copy Selected Nodes.
You have now assigned an IMG object to a structure element.The system goes back to the Configuration tab and fills in the Object and Description columns.
Create and assign preconfiguration
1. Go to the structure element to which you want to assign preconfiguration, in the project structure.
2. Choose a Type.
3. To create a new BC Set, CATT or eCATT test configuration from the Configuration tab, enter a name in the Object field and choose Create.
4. You go to one of the following transactions, depending on the object type:
BC Set: BC Set Maintenance
eCATT Test Configuration: Test Configuration (eCATT tool)
CATT: Change test case.
5. Enter the data required to create a new BC Set, eCATT test configuration or CATT.
regards
Gokul
Similar Messages
-
Customization Setting for Work center creation
Dear all,
What is the Customization Setting for Work center creation? How to do it?Hi,
Here are the few things you can check
OP40 : WC category
OP17 : Formula for WC
Person responsible : Plant Maintenance and Customer Service >> Maintenance Plans, Work Centers, Task Lists and PRTs >>Work Centers >>Define Employees Responsible for Work Centers
apart from above You can explore more in
Plant Maintenance and Customer Service >> Maintenance Plans, Work Centers, Task Lists and PRTs >>Work Centers
Riyaj -
Automatically creation of storage location for material, in MF60
Hi all,
my collegue of PP module uses MF60 transaction.
When he puts XXXX as Replenishment storage location, the system tells him this error: To stge loc. XXXX does not exist for material M1010000182 in plant 0001.
In MM i have activate the automatic creation of storage location for plant 0001 and for all movement types.
Why MF60 does not respect this requirement?
If I try to do movement type 311 with MIGO, manually, there's no problem to transfer the material from a storage location to , XXXX s.loc.
Is there something more that I have to do?
Thanks in advance!
Best regards
AlbaThanks a lot...
the note says:
Summary
Symptom
A material without storage location view exists.
If within a single material document, this material is moved in such a way that no change in stock occurs in total, the system does not create a storage location automatically even if this is set in Customizing.
Additional key words
OMC3, XLAUT
Cause and prerequisites
All postings to a segment (for example, material, plant, storage location) are only executed if a change in stock occurs. Only in this case, storage locations are created automatically. This way it is made sure that no empty segments are created.
Solution
The system behaves correctly.
Header Data
Release Status:
Released on: 07.07.2000 22:00:00
BUT why IF i do 311 in MIGO, system creates automatically storage location (also if no change in stock occurs in total).
AND if doMF60 (that does mouvement 311), system does not create automatically the storage location?
Best regards
Alba -
Creation of rule file for adding aliases to Members
Please help me in creation of rule file for adding of aliases to the members. I have created a new alias table along with default alias table.
These are the members and alias names for the newly created alias table.
0000002452 TA
0000002459 HJ
0000002460 HK
0000002462 HM
0000004012 CB
0000004015 EA
0000004025 BA
0000004070 DA
0000004087 GC
0000004088 FD
0000006231 CM
0000009103 WP
0000009106 WV
0000009126 WW
0000008458 NH
0000008475 NY
0000008481 NF
0000008483 NG
The below are the members and aliases for the default alias table.
0000001209 P&S Storage Facilities
0000001210 1210 US Procurement & Supply
0000002452 Warren Truck Assembly
0000002459 Toledo I Assembly
0000002460 Toledo II Assembly
0000002462 Toledo III Assembly
0000004001 US Manufacturing Group Office
0000004012 Jefferson North Assembly
0000004015 Belvidere Assembly
0000004025 Sterling Heights Assembly
0000004070 Newark Assembly
0000004087 St Louis North Assembly II
0000004088 St Louis South Assembly II
0000004199 Pilot Operations
0000004501 Opm
0000005111 Kokomo Casting
0000005203 Trenton Engine
0000005205 Kenosha Engine
0000005209 New Mack Avenue Engine
0000005304 Detroit Axle
0000005305 Kokomo Complex
0000005308 Indiana Transmission
0000005403 New Castle Machining & Forge
0000005404 McGraw Glass
0000005406 Toledo Machining
0000006203 Warren Stamping
0000006204 Twinsburg Stamping
0000006215 Sterling Heights Stamping
0000006231 Conner Avenue Assembly
0000002100 2100 Sales & Marketing
0000005221 GEMA - Plant1 Ops
0000009006 9006 Canadian Customs
0000009008 Canadian Manufacturing Group Office
0000009103 Windsor Assembly
0000009104 Etobicoke Casting
0000009106 Pillette Road Assembly
0000009126 Bramalea Assembly
0000008458 Atos
0000008475 Saltillo Truck Plant
0000008481 Toluca Assembly Plant
0000008483 Lago Alberto Truck Plant
Now I have to create rule files to update these aliases.
Please elaborate, so that it will be clear for me. As I am new, please make it up with steps.You dont need to create a rule file. You can create a alias table like this in a notapad
$ALT_NAME 'First'
0000002452 TA
0000002459 HJ
0000002460 HK
0000002462 HM
0000004012 CB
0000004015 EA
0000004025 BA
0000004070 DA
0000004087 GC
0000004088 FD
0000006231 CM
0000009103 WP
0000009106 WV
0000009126 WW
0000008458 NH
0000008475 NY
0000008481 NF
0000008483 NG
$END
and Save it as First.alt and You can import like this
1)Open the outline in edit mode.
2)Select Outline > Import alias table.
3)In the Open dialog box, select the alias table import file.
4)Click OK.
go to outline properties and the new alias table must be made Set as active to view the alias names.
you can create and import up to 10 alias tables -
Creation of TO Automatically for Delivery
Hi All
Our Storage type is SU Managed Bulk Storage Type , accordingly we have maintained in material master WM2 different storage unit types,also set up indicators in WM1 for removal and palcement strategies.
Now our requirement is as below...
1. TO creation for delivery - TO is not confirmed automatically ,when we try to confirm manually either forground or
background,sytem prompts to enter storage unit number manually.
We would like this to be automated ie the storage unit number should be picked up automatically by the system during TO
creation and also TO should be confirmed and created.
2.Can we automate creation of TO at the time doing PGI.
3.We would also like to print the TO automatically after PGI.
Thanks in advance
SamsonHi
For Delivery
Go to LE - WM - Interfaces - Inventory Management - Activate Automatic TO Creation - Movement types - Assign
Here for your WH No select the movement type 601 and delselect TR creation & Immed.TO creation
For Goods Receipt
Go to LE - WM - Activities - Transfers - Set Up Autom. TO Creation for TRs / Posting Change Notices
Automatic TO creation - Control data here for the secon WH No where you do not want auto TO remove the
tick mark
Also make relevant changes in in the next - Movements - assign control select the WH no and the movement
no and check for auto TO setings.
Regards
Samson -
Problem on creation of Outbond Delivery for Stock Transfer Order
Hi all,
We have problem on the creation of Outbond delivery for stock transfer order because the system doesn't group in a unique delivery for different items of a STO order.
We used VL10B or VL10D but the behaviour is the same. Even if we have to handle few items of the Stock Transfer order already scheduled, the scope is to create a delivery which group everything while the system split in several delivery notes.
Could you advice me the way to set in customizing , master data I don't know where else , the rules in order to avoid to split deliveries for STO.
Secondly if we have already created a delivery note is it possible to add a further purchase order item as in sales order processing?
Thank you for any suggestion you will give
AndreaDear Kripa,
the first point has been solved. We have checked a SAP Note 386340 which is appropriate to this case.
The second point, the one referred to the additional items to an existing delivery note, is not yet closed and I would like to know further advices from you and the other guys connected to the forum in order to help us to solve the problem.
Thanks for your help
Andrea -
Automatic creation of Transfer order for Picking and putaway
Hello All .
I would appreciate if someone can explain the process of configuring Automatic creation of Transfer order for Picking ( outbound delivery)and putaway( inbound delivery) .
thanks
RahulHi
To have transfer orders created automatically in the background, you must first set the indicator Automatic transfer order creation for each respective movement type in the Customizing application for Warehouse Management under the path <b>Activities - Transfers - Define Movement Types</b>. The system automatically copies this indicator into the header item of the source document.
For more information on how to set up automatic transfer order creation for transfer requirements and posting change notices, refer to the IMG for Warehouse Management under the path <b>Activities - Transfers- Set up Autom</b>. TO Creation for TR/Posting Change Notices.
You can find more details on this link
http://help.sap.com/saphelp_47x200/helpdata/en/c6/f85c504afa11d182b90000e829fbfe/frameset.htm
Thanks & Regards
Kishore -
How do we Prevent Creation of Production Orders for Phantom materials.
Dear Experts;
We have some materials which are Phantoms.
We have set "special procurement type" as 50 in MRP2 and "Strategy Group" as 59 in MRP3
These are non stchable items, but have BOMS.
We dont create orders for them, however at the mement the system allows order creation. How do we prevent creation of production orders for these items in the system.
Thanks in Advance
Richard.Dear Richard,
Check using this BADI - WORKORDER_UPDATE using method IN_UPDATE or Release by including a check if MATNR and for
WERKS combination if SOBSL = 50 from table MARC,then do not allow to save.
Check whether this works or else you have to set a plant specific status using OMS4 for not allowing production order
creation and assign this value in the material master of the phantom assemblies.
Check and revert
Regards
Mangalraj.S -
Creating a NetInstall Set for '10 MacBook
I am attempting to create a NetInstall set for a brand new Intel MacBook running 10.6. I have used Bombich's NetRestore Helper in the past for set creations but the last version (3.4.6) hangs and will never complete the set creation. Is there any other way to create a set for a 10.6 machine? I've looked into Deploy Studio but I don't have anything set up yet and I'd like to continue with my current setup for the time being. I'm running 10.5.8 server and all other machine types boot fine for NetInstall purposes. Just the newest machines have trouble. Any help would be appreciated. Thank you in advance.
Last I heard, Bombich's tool didn't work in SnowLeopard. You can use Apple's System Image Utility, but you'll have to download the 10.6.3 Server Admin Tools and install in on a Snow Leopard client system.
-
Error :No operating system credentials were set for running the program
i am getting this error when i am trying to execute a shell script in cmc. i got the status as failed, when clicked on that failed message this is what i got
Title: delete_month
Document Type: Program
Status Failed
Destination: Unmanaged Disk destination properties have been set to the chosen Job Server's defaults.
Owner: boadmin
Server Used: cms_451.ProgramJobServer
PID: 15010
Folder Path: Temp/
Remote Instance: No
Creation Time: 12/1/2010 7:21 PM
Expiry: 12/1/2020 7:21 PM
Start Time: 12/1/2010 7:21 PM
End Time: 12/1/2010 7:21 PM
Error Message: No operating system credentials were set for running the program.
what might be the reasonwhat do u mean by pm application, i didn't get that
we r using boe xi 3.1 sp3.on sun solaris
my exact scenerio is
I wrote a shell script to delete the reports which r one month old. the reports generated by the boe r placed in unix machine(in a specific folder for example abc) and my boe server is also on unix .I imported the the shell script into boe.I assigned the path /xx/yy/abc (the path where our reports r stored) to the arguments and i gave the working directory path as the xx/yy/bobj/bobje/data/frsinput/a0_89/ ( this is the path where my shell script is present).after giving these details i am unable to delete any of the content from that folder. I am getting the failed message when i am trying to execute the object in cmc. i am pasting the shell script as well as the error message here if any body knows anything help me. do i need to set anything in cmc or what i need to do
this is the shell script to delete the files in the specified directory
#!/bin/ksh
# set -x
if [[ $# != 1 ]]; then
echo "Usage : $0 [Directory Path]"
exit 0
fi
echo "Source directory : " $1
# To display the list of files more than a month older
for v_fname in $(find "$1"/ -name "*" -mtime +30 -type f)
do
echo "$v_fname"
done
# To delete the files of more than 1 month older
find "$1"/ -name "*" -mtime +30 -type f -exec rm {} \; -
Shopping Cart - Default Setting for Items
Since the default setting for items requires user to enter the default values on each shopping cart creation. We would like to use the BADI BBP_DOC_CHANGE_BADI to set a default value, so that user would not have to entry it over and over.
After I check the BADI, where I cannot find any export parameters associate to these default fields.
RegardsHi Vadim,
I also have a similar requirement where our customer wants to change or prepolulate the PO type in the Default settings for items.I wanted to knwo if this is user based and if there is any waye we can keep updating them based on some action on the portal.Ideally in our case we have to do it from teh portal.So if there is any RFC that can update or fill these details we can use webdynpro applications to trigger them at runtime and then update them.Any ideas ?
Thanks,
Best Regards,
Muinul -
Export Media from DV Pal to AVI: Best recommended setting for Output file?
I have a project in CS4, on Windows, in DV format (original videos were M2t).
What is the optimal setting for export (and possibly for the sequence settings too) for the best quality and then smallest size?
If my input is M2T files - is the best settings to work in Premiere is DV 1 for Pal?
I always use Progressive Interlace - is that required or is the default of Lower field OK as well (I am not sure exactly what is the impact of using just one field, but from previous versions of Premiere Progressive always improved the video image)?
Is the frame rate of Pal as 25 FPS must be adhered in the sequence setting and export to avoid re-rendering?
As for the Export side:
Is using the DV Pal is best for quality without going uncompressed?
Is starting with 16GB of DV as m2T and ending with 20GB of DV reasonable?
Is the method of exporting to DV and then compressing it using a 3rd party is the best way going about the creation of the movie and then compressing it for distribution?
What is the the recommended tool for compressing - and with which format?
The end result is meant to be consumed as an AVI on people's desktop. Not on mobiles or YouTube or DVD.
On BitTorrent I see many files that are in HD but have an amazingly small size of less 1 GB - what do these guys use to achieve such small sizes yet amazing quality?
What is the best tool and codec to achieve a compression based on a file size?
Is DivX better than XVid? And is "Multipass nth pass" is the way to configure the DivX for best results?
I really feel we lack any guidance on these aspects and a huge of time is wasted every time I get to this stage when it should all be pretty standrad for me.
I know I am asking a number of question but if someone is able to jot down the basics of the tool, codec and settings to achieve best quality (regardless of the time it takes to get to it) - I'd be very grateful!
Merry Xmas and a Happy New year to all,
Eroka00I find your post somewhat confusing.
These m2t are they converted?
Run a file that you are using in Prmeiere through Media Info and post a screendump.
http://mediainfo.sourceforge.net/nl
What is the endproduct going to be? YouTube, DVD, media player or ..... -
Multiple Character set for NLS
Hi,
I'm using Oracle 8i database. Is it possible to set the different character set for the database? The requirement is to support the two different character set data, one (main) Japanese character set and other Simplified Japanese. Or is there any other way in which i can store these data (Japanese & Chinese)?
Thanks & Regards,
JayeshPlease don't get me wrong. Currently it is set in the windows database. I did not set nls_lang at the command prompt before import into windows. However nls_lang is already set and it is character set WE8ISO8859P1 the same as the value I specified in creation script, besides the other two values AMERICAN, AMERICA. They are now same in both solaris and windows. Only the character sets are different because I specified a different one. So, is it ok or do I now need another fresh import this time with nls_lang set to AMERICAN_AMERICA.UTF8 ?
-
Configuration setting for Auto TO through Delivery (outbound)
Hi Gurus,
Could you plz, tell me whrere is the config setting for TO. creation through VL06O.
I am fallowing the below steps
1.STO creation.(STR converted to STO via ME59N).
2.Delivery created thru VL10B.
3.TO created thru VL06O (When I click on TO in background, TO is creating and displaying in LT23)
After the above process I confirm TO and do the post goods issue.
I want to know info. about configuration setting to create TO through VL06O.
your hlep will appriciated a lot.
thanks
raghuHi Raghu,
There is no separate settings for VL06O for Automatic TO creation.
Normally we assign the Automatic Creation to Mov.types in WM.
SPRO - LE - WM - Activities - Transfers - Set Up Autom. TO Creation for TRs / Posting Change Notices
In the above scenario which you have mentioned you are creating TO in the background which is done using the Mov.type & Strorage type Strategy Settings & its not a Auto TO creation.
Hope its clear,
Regards, -
Integration setting for default workflow or creator or BP not set
Hello,
I am recieving the following error when trying to create a BP via web services: Integration setting for default workflow or creator or BP not set.
Can someone let me know what I need to do to resolve this.
Thank you
RudyHi Sean,
This is what I have discovered so far. Open the Company Workspace tab and switch to Admin mode. Expand Company Sponsored Shells, expand Projects, select/open the project, under Setup/Business Process select/open the BP. Expand the BP in the tree, select Workflow Setup. Add a new setup, making sure it is Active. Go Back to the BP, open it, on the Auto Creation tab select the Setup, Creator and Action.
After doing this I recieve an error trying to add a Contract in the project "Cost Sheet is not setup" and via the web services the error is "Error processing XML" status 165. Looks like I have more to configure.
Maybe you are looking for
-
Mac mini server - Can't access Internet
Hello. Using a Mac mini server as the media server for my house. Not really using any of the Snow Leopard Server services though. Wanted the larger hard drive and didn't need an optical drive so this was perfect for me. At any rate, recently noticed
-
Apple Mail not saving attachment Name!!
I'm on OSX Mavericks 10.9.4 and using Apple Mail. I'm experience extreme frustration when trying to save attachments. Let's say I get an email with 2 attachments named smile.jpg and sunset.jpg and then I click on the icon in Apple Mail to save all an
-
Matrial Value with freight and BED ECESS And Hecess
I need to know the function of the accrual key and account key in the PO pricing procedure. I am unable to understand the system behaviour. In the case when I check the condition as accrual key required in the condition type that price is not added
-
Why Can't I Print My Score?
Suddenly I can't print anything. Everything just comes up blank in preview or saved as PDF or just sent directly to the printer. Any ideas? Thanks in advance Paul
-
Closed document without saving
I copied/pasted from web page into new document. I went to close it, and when dialog box appeared asking if I want to save document, I pressed "don't save." Don't ask me why. I understand I deleted it, but shouldn't it be in the trash? I went into Tr