Creation of custom assignment block

Hi,
I am trying to create a custom Assignment Block in the BPHeadOverview page of component BP_HEAD.
I tried implementing it using EEWB ,by referring to the below SDN link.
http://wiki.sdn.sap.com/wiki/display/CRM/EEWB-AddingTableattribute
Following this link, I have completed till the part where it is suggested to run the report
CRM_BUPA_UI_EXTEND_REPOSITORY.
My problem is,the view which I created is coming in the Runtime Repository under the viewset for  BPHeadOverview page
, but I am unable to find my view in the Component Structure Browser under the Views section.
As a result of which I am unable to configure my custom Assignment block.
Due to which I can't even find my AB with the other ABs coming under the BPHeadOverview page.
Kindly suggest a solution.
Thanks,
Litty.

Hi littyj,
           Move assignment block  BP_EEW in the overview page of BP_HEAD from available to displayed. Give it a title. Save configuration setting and check in web ui.
Also please check in table BSPWDV_EHSET_ASG if the enhancement set your are using is default for the client you are working on or not.
I m quite sure this issue is because of the enhancement set.
Regards,
Varun

Similar Messages

  • Saving data for a custom assignment block

    Hi All,
    I have created a custom assignment block where data is coming from custom table successfully. Now when I am modifying data from that block, MODIFY method of my custom implementation class is getting triggered. Till that point, I can get the modified entries. But how can I save those modified data?
    I have inherited my implementation class from CL_BUIL_ABSTR. But EXECUTE_WITH_SAVE method is not getting triggered when I am testing my object from GENIL_BOL_BROWSER.
    I am not sure whether I have to update API tables in MODIFY only. Please advise.
    Thanks,
    Suchandra

    Hi,
    Please run a ST01 trace and verify if the custom report has authority check for P_ORGIN and even if it does, verify if check for 'DUMMY' has been specified for the object field PERSA. In both cases, the restrictiona entered in user's role wouldn't work as expected.
    You can alternately also use reports RSABAPSC or RPR_ABAP_SOURCE_SCAN for verifying the above mentioned points.
    Please revert what you find.
    Thanks
    Sandipan

  • Adding a New Assignment Block

    Hello Experts,
    I need to add/create a new assignment block 'Strategy Plan ' similar to existing assignment block 'Attachment'
    in Account screen.
    I got the document which suggest creation of new assignment block by creating Set Type and attribute.
    But can't figure out how to make that assignment block similar to  existing one 'Attachment'.
    Please help me how to proceed .
    Thanks in Advance,
    Ram

    Hi Arun,
    I did exactly how you said.
    Opened the Component BP_HEAD in Enhancement set 'Z_ENHANCE'.
    Added the component usage 'ZStrategy' their inbound plugs and outbound plugs
    similar to one used by Attachment assignment block.
    Added the View 'ZStrategy.MainWindow' under viewarea 'OverviewPage'
    of ViewSet 'BP_HEAD/BPHEADOverveiw'.
    Also Initialized the component usage in WD_USAGE_INITIALIZE of component controller.
    But When I see the assignment block in WebUI.
    I see simple window with no toolbars in it. Also It disapears when expanded.
    I gives error like "CX_BSP_WD_INCORRECT_IMPLEMENT - Define component usage 'ZStrategy'
    CX_BSP_WD_INCORRECT_IMPLEMENT - Define component usage 'ZPlanStrategy' "
    I think I missed some steps or may be my enhancement set is not loading.
    Help me out.
    Thanks and Regards,
    Ram

  • Creation of a simple custom fact sheet with assignment block

    Dear CRM Gurus,
    i need to create a custom fact sheet with a assignment block and link for that has to be given in a navigation bar . once if I click on  that navigation bar the custom fact sheet has to be displayed. am relatively very new to crm. kindly help me in this aspect.

    Hi Thomas,
    " By default, the Collect Signatures workflow is associated with the Document content type and it is thus automatically available in document libraries for documents or workbooks that contain Microsoft Office Signature Lines. "
    It doesn't work for a custom list which cannot be added with the document content type, please see more information from below,
    http://office.microsoft.com/en-us/sharepoint-server-help/use-a-collect-signatures-workflow-HA010154428.aspx
    Thanks
    Daniel Yang
    TechNet Community Support

  • Adding custom fields to table view assignment block

    Hi All,
      I want to add two news fields to 'Service Contract Item Level' in 'Object List' assignment block. How can i add these two custom fields to table view assignment block using AET. I have tried to add new fields using AET but there is no business object supports to my requirement.
    Thanks & Regards
    Nitish

    Hi Nitish,
    As naveen sadid use Cutomer_i object . I guess it will be more appropriate.
    And following link will be helpful for AET creation.
    CRM 7.0 How to --4 Adding Custom Fields With The New Application Enhancement Tool (AET)
    Regards
    Loks

  • Adding custom (z) fields to assignment blocks...

    We are running SAP CRM 7.0. We are using the opportunity module as well as "Create Follow Up" (Sales Order / Quotation) so that you have a one to many relationship (1 opportunity may contain many sales orders). I have 2 custom fields inside the Sales Cycle (Quotation) module "Actual Sales Order Value" and "Current Points".
    What I am trying to do is take these 2 custom fields and add them to the assignment block called "Linked Transactions" in the Opportunities module. But when I look at all the available fields for this assignment block these 2 custom fields are nt available.
    I do not see any way of adding these 2 fields to this assignment block. The only thing I see is "Create NEw Field". But I do not want to create a new field I just want to reference 2 fields from the Sales Cycle module inside of this assignment block.
    Does anyone knowif it is possible to add 2 custom created fields that are i the Sales cycle module to add them to the opportunities assignment block that is called linked transactions ?
    Thanks,
    Jon

    Duplicate thread.
    Re: Add custom fields to assignment block
    Please close.
    Rg,
    Harshit

  • SAP CRM Role assignment block - Customer cc

    hi there, can anyone please tell me what the Customer CC refers to in the SAP CRM Role assignment block
    Thanks, Sue

    hi ahmedi khan,
    the role key what you have created that will be assign to your business role.
    go to CRMC_UI_PROFILE or
    SPRO >> Customer relationship Management >>UI Framework >>Business Roles >> Define Business Role
    click on your business role and under role config key you have to pass your custom role key..
    like this..
    go through this link you can get to know..
    The Usage of the SAP CRM Role Configuration Key –Detailed example
    Thanks & Regards,
    Srinivask

  • Problem in  creation of Customer Master

    Hi gurus,
    I am facing problem in creation of customer master.
    I have created a account group zz01 copying from 0001.which has internal no. assignement for the customer.
    Now i am trying to create a customer master, at partner functions level under sales area data...  the system is asking for the no. for each partner functions.. when i tried to manually enter, the system is not taking any number nor it is letting me save the data.
    Please help me out in acertaining,  what could be the issue.
    regards
    Gupta
    [email protected]

    its due to the number ranges that is specified in the partner determination ... chech what is the number range assigned in the parner determination ,,, so once u check that u have to manually enter the number between that range only .. this should solve ur problem...
    path to check the number range is as below :
    spro-img-logistic generalbusiness partner-customers---define account groups and field selection ---    
    at this point click position button at the bottom and give ur account group .. select ur account group and click detail button .. now inside that u can see the specified number range .. dafault is 08 ( means u can specify between 400000 to 499999)..
    and some times  u may not have defined number range... check urs and create accordingly ... this should solve ur problem...
    rewards if solved ..
      thank you
    madhan

  • How to make an assignment block with valuenode editable?

    Hello All,
    I have read the blog [How to display a z-table in an assignment block|http://wiki.sdn.sap.com/wiki/display/CRM/Howtodisplayaz-tableinanassignmentblock]. This all went fine. Now I have a question if it is possible to make this table editable and if so, how?
    The problem is, it is valuenode for a custom z-table, without a GUID as key. (just partner number) So making a Simple Object of my z-table doesn't work, because the default class works with GUID as key. But I also can't seem to find if it is possible to make a valuenode editable.
    I also read these blogs, but they didn't do the trick for me either:
    [CRM Web UI Technical - Creating Table View In Web UI|http://wiki.sdn.sap.com/wiki/display/sandbox/CRMWebUITechnical-CreatingTableViewInWebUI]
    [Create a Z BOL Object Part 1|http://wiki.sdn.sap.com/wiki/display/sandbox/CRMWebUITechnical-CreatingTableViewInWebUI]
    I am silently hoping that there is an easy way of making my current assignment block editable by implementing a simple Save method or something similar. I do not prefer to have to recreate my view and stuff.
    Anyone an idea?
    Regards,
    Martijn.

    Hi Martijn,
    Try this code..
    If the main entity(assuming one order entity) is editable, set the view to editable.
    DATA:      lr_entity       TYPE REF TO cl_crm_bol_entity.
      lr_entity ?= me->typed_context->btadminh->collection_wrapper->get_current( ).
      CHECK lr_entity IS BOUND.
      if lr_entity->lock( ) = abap_true.
        *me->view_group_context->set_view_editable( me ).*
      endif.
    Check this therad for setting the view context.
    Edit the order
    Hope this helps..
    Cheers,
    Sumit Mittal

  • How to make an assignment block in an overview page read only

    Hi Experts,
    We have the following requirement:
    In Campaign overview page we need to make the Partner and Product assignment block read only.
    Can this be achieved through coding or through configuration?
    Please give detail steps for the appropriate approach.
    Thanks in advance.
    Regards,
    Sayan

    Hi Leon,
    Is there any authorization group which can be customized to take care of this situation?
    For Product Assignment block in DO_PREPARE_OUTPUT method of class CL_CPGOE_AB_OVELPRODUCTS_IMPL (Component : CPGOE_ABLOCKS :: View : OVELProducts) it is checking some authority. Any pointers where those authorities are maintained will be helpful.
    Creating a new configuration is not helping as the views are 'Table View'.
    We are looking for an approach which will avoid coding or involve minimum coding.
    Regards,
    Sayan

  • Adding an assignment block

    hi
    I have to add a new assignment block on the UI. I  have done it by creating a view in a new component and then getting the fields displayed on the UI by including that component in the Component Usage for the required component. The problem i am facing is that, all the fields are getting displayed in  the non-editable mode. I am not able to manipulate the values for these fields using the GET, GET_I methods also. Please help me in solving this problem.
    Help would surely be rewarded.
    Regards,
    Radhika

    Hi Radhika,
    Please note that fields will get value either from custom controller or component controller in your case.
    When you include any component in other component you need to specify which custom controller your component will be using to fetch the value.
    Eg: Your componet is C1 and you have added it in component useage of C2. Also C2 has cuco.Also you need to create cuco in c2 for your component c1so that c1 is able to fetch the value.
    Now when you have specified the cuco, you need to tell in component controller that if your component is C1 then your cuco is cuco(that you created in C2).
    This you do in implementation class of component controller and wd_usage_initialize method of implementation class of component controller. If you check any standard component, you will find custom controller for component usage components. Write code for your component C1.
    Then you will be able to use values and fetch values.
    Best regards
    Pankaj Kumar

  • Supressing Drag&Drop for Assignment Blocks in Overview Page

    Hi Experts,
    in the standard setup it is possible to change the order of assignment blocks in a Web UI Overview page by means of drag and drop. Does anybody know how this feature can be suppressed if not desired?
    Thanks,
    Jens

    Hi,
    one solution is to deactivate this in the customizing of the businessrole.
    Add function profile PERSONALIZATION with value ALL_DISABLED to disable all personalization functionality.
    There are some other values possible like:
    WA_ENABLED or PP_ENABLED
    Just test a little bit arround which is the correct one for your requirement. ALL_DISABLED deactivates all personalization.
    Kind regards
    Manfred

  • Issue in Program for mass creation of customer plans.

    Hello all,
    I am working on a program which helps mass creation of customer plans. My code works well, when no planning account is assigned,  but when I pass the planning account value into the Function module, it gives me an error saying ' Account cannot be displayed, please check your authorizations'. I donot have this problem, when I manually createthe customer plan in the CRM_UI.
    Please let me know the possible cause for this kind of message.
    Thanks,
    Disha.

    Hi Dishaa,
    I'm afraid that I don't have any other clues. Most often it is a difference in user. If you are absolutely sure that you are using the same user at the exact moment the authorization is checked it cannot be that.
    Kinda curious now what the solution to your problem is....
    Best regards,
    Guus
    Edited by: Guus Jansen on Feb 14, 2011 1:32 PM

  • R12 Creation of Custom Responsibilities

    Hi,
    We are currently on R12 with a single org setup and and have a requirement to create custom resp. to control user access.
    Pls. let me know if creation of custom menus, sub menus, request groups is the right option OR menu, function exclusions a better option.
    When compared to 11i does R12 require any additional setups apart from New Resp, Menu, Submenu, Functions, Request Groups, Profile Options..?
    Any metalink note Id which discusses detail of creation of custom resp. in R12 will be of great help.
    Thanks

    Hi,
    The only way you can restrict an user to do certain activities only by defining multiple custom responsibilities... e.g.. A user should not have the privilege to do setups in the system.. He is authorised to do trxs only.. for that you define a Responsibility like "Inventory User" and exclude "setup" function/menu while defining the Responsibility... Now assign this resp to the user..By using this he will be able to do trxs only but he can't do setup or setup changes in Inventory module...
    Your question:  Pls. let me know if creation of custom menus, sub menus, request groups is the right option OR menu, function exclusions a better option.
    To my know knowledge menu, function exclusion is a better option….
    Inventory Responsibilities (e.g.)
    ==============================================================
    Name: Application: Responsibility Key: Description: Effective Start date: Data Group Name: Data Group Application: Menu: Request Group Name: Request Group Application: Read Only Access Exclusions: (Menu) Exclusions: (Menu) Exclusions: (Function) Exclusions: (Function) Exclusions: (Function)
    ==============================================================
    EU_INV_CZE_CLERK_1 Inventory EU_INV_CZE_C1 EU_INV_CZE_CLERK_1 1-Jan-90 Standard Inventory INV_CLERK_1 All Inclusive GUI Inventory Manage Shipments Corrections
    EU_INV_CZE_CLERK_2 Inventory EU_INV_CZE_C2 EU_INV_CZE_CLERK_2 1-Jan-90 Standard Inventory INV_CLERK_2 All Inclusive GUI Inventory INV_CYCLE_COUNTING Manage Shipments Corrections
    EU_INV_CZE_CLERK_3 Inventory EU_INV_CZE_C3 EU_INV_CZE_CLERK_3 1-Jan-90 Standard Inventory INV_CLERK_3 All Inclusive GUI Inventory Miscellaneous Transaction
    EU_INV_CZE_SUPERVISOR Inventory EU_INV_CZE_SUPV EU_INV_CZE_SUPERVISOR 1-Jan-90 Standard Inventory INV_NAVIGATE All Inclusive GUI Inventory INV_SETUP INV_KANBAN Launch Cost Update Standard Cost Update
    Above supervisor resp will restrict user not do setups and he can't do cost update
    **EU_INV_CZE_Super User* Inventory EU_INV_CZE_SU EU_INV_CZE_ Super User 1-Jan-90 Standard Inventory INV_NAVIGATE All Inclusive GUI Inventory Launch Cost Update Standard Cost Update_
    Above super User resp will allow user do setups in Inventory but he can't do cost update as Supervisor resp
    EU_INV_CZE_Setup View Inventory EU_INV_CZE_SUVO EU_INV_CZE_ Setup View 1-Jan-90 Standard Inventory INV_SETUP All Inclusive GUI Inventory Yes
    Question-2_
    When compared to 11i does R12 require any additional setups apart from New Resp, Menu, Submenu, Functions, Request Groups, Profile Options..?
    Ans : No… since you are setting up resp for a single org now.
    Hope this will help.
    Thanks,
    S.P DASH
    Edited by: spdash12 on Oct 22, 2009 11:25 AM

  • How to populate data from bol to assignment block.

    Dear experts,
    I saw on sdn discussion similar questions, but have not found the suitable answer.
    I need to add fields for BP using EEWB and to work with this field in WEB UI. For achievement of it I have executed following steps:
    1. Using EEWB has added new z u2013 fields to BP. This fields have appeared in tcode bp on a tab "customer data".  Besides I have seen this field in created z u2013 BOL.
    2. Using tcode BSP_WD_CMPWB has created z bsp component.
    3. In z bsp component has created view and custom controller which correspond earlier created z - BOL. Also has created following binding:
       owner->do_context_node_binding(
                iv_controller_type  = cl_bsp_wd_controller=>CO_TYPE_CUSTOM
                iv_name = 'ZBP_S_INF/NumBpOutSYS'
                iv_target_node_name = 'ZZ9BHEEW'
                iv_node_2_bind      = ZZ9BHEEW ).
    4. Has redefined method DO_PREPARE_OUTPUT and would make modify the *.htm file for the purpose on toolbar there were buttons of editing of the data.
    5. Has adding z - assignment block to bp_head component.
    At start WEB UI the assignment block it is visible in list displayed blocks of account data. In this block there are buttons on toolbar. But in this block the data is not displayed. Though really data there is, as they are displayed in tcode bp.
    Please inform as to populate the data from bol to z u2013 component. I assume that it is necessary for me to create get_ methods. But methods get_ and set_ do not cause query.
    Iu2019m work in CRM 7.0.
    Best regards,
    Eugene.

    HI, Prasenjit
    Here the text my html pages
    <%@page language="abap" %>
    <%@extension name="thtmlb" prefix="thtmlb" %>
    <%@extension name="chtmlb" prefix="chtmlb" %>
    <%@extension name="bsp" prefix="bsp" %>
    <thtmlb:areaFrameSetter toolbarButtons  = "<%= controller->gt_button_header %>"
                            maxButtonNumber = "3"
                            displayMode     = "<%= controller->view_group_context->is_view_in_display_mode( controller ) %>" />
    <chtmlb:configTable actionsMaxInRow       = "3"
                        allRowsEditable       = "TRUE"
                        displayMode           = "<%= controller->view_group_context->is_view_in_display_mode( controller ) %>"
                        downloadToExcel       = "TRUE"
                        id                    = "Table1"
                        onRowSelection        = "select"
                        personalizable        = "TRUE"
                        selectedRowIndex      = "<%= ZZ9BHEEW->SELECTED_INDEX %>"
                        selectedRowIndexTable = "<%= ZZ9BHEEW->SELECTION_TAB %>"
                        selectionMode         = "<%= ZZ9BHEEW->SELECTION_MODE %>"
                        table                 = "//ZZ9BHEEW/Table"
                        usage                 = "EDITLIST"
                        visibleFirstRow       = "<%= ZZ9BHEEW->VISIBLE_FIRST_ROW_INDEX
    %>"
                        visibleRowCount       = "6"
                        width                 = "100%"
                        xml                   = "<%= controller->configuration_descr->get_config_data( ) %>" />
    Whether the page can html operate extraction of the data?

Maybe you are looking for

  • How to get a formula from the user from a text box in a webpage

    Hi. I would like to know how to get the formula from the user who enters in a textbox. This formula can have any number of variables starting with a and goes on. The complexity of the formula can go upto sin, cos, ln, exp. Also user enters the minimu

  • Problem using SmartCard with 2 Certificates stored and SunPKCS11

    Hi, I'm trying to access one SmartCard token in Java 1.5 using SunPKCS11 provider for crypt, decrypt and digital signature operations. I have 2 certificates stored on Token: - CertA; - CertB. There are also 2 PIN: - PIN1; - PIN2. I use: - PIN1 for lo

  • Sales person in the service call report

    Hello I am using PLD to make a new layout for the service call report. I would like to add a column with the sales person of the customer. I have already added the field from the table, but i just get a blank column. Does anyone know how I can do it?

  • Compliance Calibrator analysing APO

    Hi, I've installed CC4.0 in a 46C release, we would like to run RA against APO transactions, but I can't establish a correct RFC connection without receiving an ABAP error... Can you help on the config? Thanks very much, Enrico

  • File permissions mess

    I have a bunch of files whose owner is designated as "_unknown." I know I can change permissions on a folder and then choose to apply to enclosed items but that only works for unlocked permissions. All of these files have locked permissions. Is there