Creation of inbound shipments with reference to GR

Hi Gurus,
Is it possible to create a shipment document with reference to GR made from the PO's? I understand that there is a procedure to create inbound shipment from inbound deliveries. I would like to know if inbound delivery is mandatory to create inbound shipment. As we have the process of creating GR with reference to PO i would like to continue using that process if possible. Your inputs would be greatly appreciated.
cheers
joseph

if you want to have you can use the FM ALM_ME_GOODSMVT_CREATE
hope it helps

Similar Messages

Creation of Inbound Delivery with reference from PO

Hi,
        I use this FM-BBP_INB_DELIVERY_CREATE for creation of inbound delivery. Delivery date is same Actual GR date means it's working fine. But i give less than or greater than Actual GR date means it shows following error,
          'Acknowledgment for PO item 10028 00010 contains date variance'
    Please tell me how to correct this error.Otherwise tell me correct FM/BAPI to create inbound delivery with reference from PO

Hi Anjaneya,
            My business process is,(In MM side)
     I create one purchase order(me21n) mention Delivery Date is 24.08.2011 and Delivery Qty is 20 etc......And raise the po to vendor.
   In vendor side, check the po details and perform confirmation process i.e creation of inbound delivery using FM BBP_INB_DELIVERY_CREATE. I give the following inputs,
        Import
          IS_INB_DELIVERY_HEADER -DELIV_DATE = 26.08.2011
         Tables
         IT_INB_DELIVERY_DETAIL -MATERIAL = M1
         IT_INB_DELIVERY_DETAIL -DELIV_QTY = 20
        IT_INB_DELIVERY_DETAIL-UNIT = EA
        IT_INB_DELIVERY_DETAIL-PO_NUMBER = 0000010028
         IT_INB_DELIVERY_DETAIL -PO_ITEM = 00010
If run this FM shows the following error
       '      Acknowledgment for PO item 0000010028 00010 contains date variance'
                Please tell me how to correct this error.

Creation of inbound delivery with reference to a purchase order

Hi
Everyone on the Forum, I have an inbound delivery (ASN), z that programmatically
(1) (2) I will develop, I found two modules function, BBP_INB_DELIVERY_CREATE and BBP_INB_DELIVERY_CREATE_31I. The two modules operate to create inbound delivery, only
the first mark me an error and the second error don't mark me, but not validates me any data
the purchase order. The error I marked in the function call function 'ME_CONFIRMATION_READ_AVIS'
If I can help with this issue or tell me the difference between one and another.
Thank you.

if you want to have you can use the FM ALM_ME_GOODSMVT_CREATE
hope it helps

Creation of Multiple Shipments with respect to Single inbound.

Hi,
This is regarding creation of Multiple Shipments with respect to Single inbound.
In standard SAP, you can create Shipment cost based on Inbound number.Requirement is here for single inbound can we create multiple Shipment document.
Can we do shipment costing for Multiple shipment in single document through VI01.
Yours Help in this will be highly appreciated.
Regards
Sunami.

dear friend,
to process shipment cost documents you can either call up a shipment cost document in change mode or you can create lists of the shipment cost documents
you can create the following lists:
-Shipment cost documents for calculation
-Shipment cost documents for settlement
to process a single document use t-code VI01
to create lists of shipment cost documents to be changed use t-code VI11
so, if you need something very special you would think about the new enhancement...
good luck!

Creation of inbound delivery without reference to a PO

Dear gurus,
Let's say that a normal inbound flow is something like this:
PO > Create inbound delivery with reference to PO > inbound shipment > Transfer Order > Confirm Transfer Order > Post Goods Receipt > Putaway
Issue:
My client does not want to create the PO because the PO serves no purpose to them. They want the process to start from inbound delivery.
Question:
1. Can a standalone inbound delivery be created WITHOUT reference to a PO ? If yes, please tell me the configuration and transaction code involved in order to create this standalone inbound delivery.
2. Based on standard configuration, can an inbound delivery be created automatically with reference to a material document (for eg MIGO Mvt Type 501). Once again, for this scenario, no PO should be involved. If yes, please tell me the configuration and transaction code involved in order to trigger the creation of this inbound delivery (I'm not looking for the answer of an inbound delivery creation BAPI to being triggered directly after the creation of the Material Document).
3. Based on standard configuration, can an inbound delivery be created manually with reference to a material document (for eg MIGO Mvt Type 501). Once again, for this scenario, no PO should be involved. If yes, please tell me the configuration and transaction code involved in order to create this inbound delivery.
Thanks.

Hi Peter,
Actually, my intention is not really to create an inbound delivery based on a goods receipt. Since my client is not keen on the idea of creating a PO, I'm actually trying to provide alternatives and workarounds. From what I have gathered, I already know this much
-> An inbound delivery must be created with reference to PO unless Handling Unit Management is activated. If Handling Unit Management is activated, the creation of a Material Document will trigger the creation of an inbound delivery (I havent tested this out yet). Therefore, a PO will not be necessary in this case.
I was kind of expecting answers along this line, unless of course, something better pops up. Maybe someone out there may know something more.
As for Handling Units, I'm not familiar with it. Hopefully somebody can give me a good configuration guideline on what to do in order to activate it so that I can simulate the scenario of a Material Document triggering the creation of an inbound delivery (I'm not looking for the kind of answers which simply cuts and pastes the SAP HELP URL, 4.6C Handling Unit PDF, Best Practice Document and etc). Hopefully somebody out there can really give me a good guideline on how to do this.
Thanks..

Create Inbound Delivery with reference to Outbound Delivery

Hi Team,
Can anybody describe the process needed to be able to Create an Inbound Delivery with reference to an Outbound Delivery.
Also, can the whole inbound delivery creation process be automated?
Thanks.

Inbound Delivery can be created wrt :
Purchase order
Shipping notification
Customer return
and
Outbound Delivery can be created wrt:
Goods shipment based on a sales order
Stock transfer order
Goods return (to the vendor)

Goods Receipt using Inbound Delivery with reference to Outbound Delivery

Here is our scenario that we need help finding a solution:
1. Multiple Intracompany POs created
2. On the confirmations tab of the POs, we have u201CInbound Deliveryu201D Selected because the items need to be received in with Handling Unit management.
3. We have the Order Combination box checked on the shipping tab to allow 1 delivery to be created for multiple purchase orders.
4. We create only 1 Outbound Delivery for only available items on various purchase orders.
5. Due to being handling unit managed, we need to receive the items using an inbound delivery.
Problem: We need to find a solution to easily enter an outbound delivery number which will allow us to receive only the parts that were shipped (issued), via the inbound delivery process.
If we remove the confirmation control key, we can complete a Goods Receipt for Outbound Delivery in MIGO u2013 but is there a way to complete a goods receipt using an inbound delivery with reference to an Outbound Delivery?
Thank you for the help.

Hi,
You can work with Inbound delivery created via IDOC Triggered from Outbound Delivery, this will carry the HU Data as well. Please refer this wonderful note, which will explain you a lot of things, Note 1119073 - FAQ: Automatic inbound delivery creation for stock transfers
There are other notes also available for Inbound delivery creation with HU in STO, please browse the notes, if you find any difficulty.
Regards
Chandra Shekhar

HOW TO CONTROL ON CREATION OF SALES ORDER WITH REFERENCE TO EARLIER SO?

Dear All,
I want to contol on creation of Sales order with reference to earlier SO? While creation of sales order our enduser are creating sales order with reference to earlier month SO which I want to restrict. Recently I made changes in sales order like payment terms is grayed, system will atomatically pick pay terms from customer master.Now I am getting correct data also but enduser is using old SO no while creating new SO and old payment data is reflecting in fbl5n.
I want to restrict enduser while creating new SO with ref. to old SO. Only for returns they should be able to use Billing refrence. Pl. suggest how to control the with reference to ealier SO.
Nikhil

Nikhil Deshpande,
If you dont want allow create a sales order in referent to other one, just delete the copy control between these sales order type, so when the user tries to create a SO in reference to other one a message is displayed that is not possible.
Thanks,
Mariano.

Creation of sales order with reference to inquiry no.

Hi gurus!
Im having trouble in creation of sales order with reference to inquiry no. The scenario is like this one. In va11(creation of inquiry no.), in the field of <b>SERVICE LEVEL</b>, i indicated a value. after the creation of inquiry no, i want to create a sales order with reference to inquiry no. But the problem is, the <b>SERVICE LEVEL</b> field does not have any value. What is the main problem to this scenario? is it the VARIANT CONFIG or the program itself? please help its urgent
Regards,
Mackoy

Dear Machoy,
In IMG under
Sales and Distribution -> Sales -> Sales Documents -> Maintain Copy Control for Sales Documents -> Copying Control: Sales Document to Sales Document
or Transaction VTAA
http://help.sap.com/erp2005_ehp_02/helpdata/en/70/a7853478616434e10000009b38f83b/frameset.htm
If you create a sales document with reference to a preceding document, the system copies nearly all the data from the preceding document. The data in the preceding document originally comes from the customer and material master records. Because the data is copied from the preceding documents into the sales document, any changes that have been made to the master data records since the preceding document was created are not included in the sales document. If, when you create with reference, you add another item to the document that was not in the preceding document, the system determines the data for it from the master records, such as the material master or info record.
You have created an inquiry and a quotation with reference to this inquiry. Before you created the quotation, you changed some data in the material and customer master records.
You have changed the material description in the material master record. This description is stored in the sales document at item level.
You have changed the terms of payment in the customer master record from ZB01 to ZB03. These are stored in the sales document at header level.
When you created the inquiry, the system copies the original material description to the item. If you enter another item in the quotation for the same material, the system displays the new material description for the new item.
However, the system continues to propose the original term of payment, that is, ZB01, for all items including the new one. This is because it is copied from the header of the preceding document into the header of the quotation, and the change in the customer master record has no affect on the quotation.
Regards,
Naveen.

Create Inbound Delivery with Reference to PO using Serial Numbers

I guys.
I didn't find any BAPI to create an Inbound Delivery with Reference to PO using Serial Numbers so I've made a Function Module with BDCData.
LOOP AT serial.
    ADD 1 TO ld_count.
    ld_value = serial-sernr.
    CONCATENATE 'RIPW0-SERNR(' ld_count ')' INTO ld_field.
    PERFORM bdc_field USING ld_field ld_value.
ENDLOOP.
This works fine for 10 entries, but when I'm trying to use 1000 entries in serial Internal Table I'm getting the error: Screen 0000 is too large for internal batch input area - Message no. 00379.
Please note that my issue is the Serial numbers, so don't answer me please with BAPIs that doesnt allow me to deal with this.
Any idea?
Thanks in advance,
Nuno

As I expect, it solved my problem. It's not pretty, but it works...
PERFORM bdc_dynpro      USING 'SAPLIPW1'       '0200'.
PERFORM bdc_field       USING 'BDC_CURSOR'     'RIPW0-SERNR(01)'.
DATA: ld_valor(4) TYPE n,
        ld_next,
        ld_tabix TYPE sy-tabix.
LOOP AT serial.
    ld_tabix = sy-tabix.
    IF ld_next = 'X'.
      CLEAR ld_next.
      ld_count = 2.
    ELSE.
      ADD 1 TO ld_count.
    ENDIF.
    ld_value = serial-sernr.
    CONCATENATE 'RIPW0-SERNR(' ld_count ')' INTO ld_field.
    PERFORM bdc_field USING ld_field ld_value.
    ld_valor = ld_tabix + 17.
    ld_valor = ld_valor MOD 18.
    IF ld_tabix NE 1 AND ( ld_tabix EQ 19 OR ld_valor EQ 0 ).
      ld_next = 'X'.
      PERFORM bdc_field       USING 'BDC_OKCODE'     '=PNPG'.
      PERFORM bdc_dynpro      USING 'SAPLIPW1'       '0200'.
      PERFORM bdc_field       USING 'BDC_CURSOR'     'RIPW0-SERNR(01)'.
    ENDIF.
ENDLOOP.
PERFORM bdc_field       USING 'BDC_OKCODE'     '=RWS'.

Creation of production order with reference to sales order

dear all guru's,
i m having a requirement of creating production order with ref to sales order but without changing my old strategy of make to stock.
regards
ujwal

Hi,
For the purpose of creation of production order with reference to sales order while maintaing MTS strategy you need to maintain Make to stock strategy 40 in strategy group in MRP-3 View of Material Master.
This is the only Make-to-Stock Strategy which enables you create Production Order against both Sales order as well as Demand / PIR.
So if your strategy group is already 40 then you need not change it.
However if you are using any other Make-to - Stock strategy like 10, 11 etc. then it is not possible to create Production Order against Sales Order since they dont consider Sales Order in planning.So you need to change them and set strategy group as 40.
Hope this helps.
Revert if you have any doubt.
Regards,
Tejas
Edited by: Tejas Pujara on Sep 27, 2008 8:50 AM

Creation of Change request with reference to existing change request

Hi
I want to do Creation of Change request with reference to existing change request for MDG-F and MDG c/MDG S Is it possible? If yes, How?

Hi Sanjay,
No , its not out of box functionality in MDG. Reason being, MDG framework provided some standard API's with the help of which we can do our development with ease.
Like Governance API                            : IF_USMD_GOV_API
       Convenience Governance API         :IF_USMD_CONV_SOM_GOV_API
       Change Request API Interface:       IF_USMD_CREQUEST_API
With the help of which you can play around with your data in MDG with the pre-defined methods of it.
Best Regards,
Kaustubh

Function module to create Inbound delivery with reference to Purchase Order

Hi experts,
I want to create Inbound delivery with refernce to Purchase Order. But I want to create item wise. For example If one purchase order is there with 10 line items. 10, 20, 30, 40, 50......100.
If I am showing report for Purchase Order with select option and if I select first 5 line items 10, 20, 30, 40, 50 then my program should be create one Inbound delivery for selected line items only. I have tried BDC for Tcode VL31N, but its not worked. Is there any Function module to create Inbound delivery with reference to Purchase Order for selected line items????????

Hi,
Try FM RV_DELIVERY_CREATE or GN_DELIVERY_CREATE.
For creating a delivery wrt PO u 1st need to have a sales order i guess.
Regards,
Amit

Could we create an inbound delivery with reference to purchase requisition?

Dear all,
Could we create an inbound delivery with reference to purchase requisition?
If yes, how could we customize the system?
Kind regards,
Adi

No, I don't think so. You have to convert it into a PO and then you can create the delivery.

Inbound delivery with reference to PO

Dear MM Gurus
I am trying to create the inbound delivery in VL31N with reference to PO. getting error No item category exists (Table T184L EL Z010 V )
Thanks in advance

Hi
Check in Tcode 0184 whether item category determination exists for the Inbound delivery type EL
and also check in table T184L
Regards
Amuthan M

Creation of inbound shipments with reference to GR

Similar Messages

Maybe you are looking for