Creation of IT0019 Monitoring of tasks record

Hi,
I need to create a record for short term contract in infotype 19 for persons who have undergone
some special training programs . Is there any option to attach such prerequisite to the Event type or event such so that when an emloyee enrolls himself for such event a record should automatically be created in infotype 19 ??
thnx and regards,
vinay

Hi Vinay,
There is no options in SAP Standards...
You have to go for Z developments.
Warm Regards,
Kapil Kaushal

Similar Messages

'Task Type' property in Monitoring of Task iview in MSS

Hi,
There is a property called 'Task Type' in the iview 'Monitoring of Task'.
This is supposed to restrict the display of task types to what is specified here in this property only.
For eg, if i have 3 task types configured for It0019 in the back-end and want only 2 to get displayed in the portal, then i will mention those task types in this property.
1 -- Monitoring Overtime
2 -- Monitoring payments
3 -- Monitoring absence.
I have mentioned the task types separating them by ';'.
However now no task is getting displayed.
Can anyone help please?
Thanks and Regards,
Pinki

can you please check your iview property
FUNCTION HRMSS_RFC_RD_DATES_GETLIST
FUNCTION HRWPC_RD_DATES_GETLIST_INTERNA
LOOP AT lt_monitoringtask
 INTO ls_monitoringtask
 WHERE ( p0019-termn BETWEEN begda AND endda ) OR
 ( p0019-mndat BETWEEN begda AND endda ).
 check for allowed employment status
 IF NOT t_employmentstatus_mt[] IS INITIAL.
 LOOP AT lt_action
 INTO ls_action
 WHERE pernr = ls_monitoringtask-p0019-pernr AND
 begda <= ls_monitoringtask-p0019-termn AND
 endda >= ls_monitoringtask-p0019-termn.
 EXIT.
http://help.sap.com/saphelp_erp60/helpdata/EN/43/376d7ced1f1bcee10000000
a1553f7/frameset.htm

Checking the status of task records tied to the custom object 3

We are using custom object 3
There has been lot of configuration work done on this object.
There is a checkbox on the UI. When a user will checks off the check box, a task record(s) is created depending on the condition.
Is there a way for me to check the status on the task records and then set a field on the parent record i.e. custom object 3.
Thanks,
Nitika

To whom are you speaking?

SCMA(Schedule Manager) - Monitoring Flow task

Hi,
Anyone has experience with SCMA. If so, can you please guide me in resolving the following issues.
1)In monitor, Flow task status is green but the underlying two steps have no status. I see Schedule Job and Start Job for each step with no status.
Why SCMA does not update the status of start job(or Schedule job)?
2)Since the flow definition is assigned to 'Customer' appplication, no work list is possible.
if so, shouldnt the monitor display the details of corresponding job(from SM37) in the flow task details. I havenot seen any demo yet with worklist so I do not what does it provide in monitor.
3)Is there an implementation guide for customer applications providing worklist?
I sincerely appreciate reply for any of the above questions.
thanks,
venu

bumping up.

Monitoring of Task

What is the functionality of Monitoring of Task. Does a window pop up as reminder at the completion of Task.

You can create automatic monitoring of tasks for all HR activities that have follow-up activities in the Monitoring of Tasks infotype (0019). Depending on the selected task type, the system proposes a date on which you will be reminded of the stored tasks. This enables you to implement the follow-up activities on schedule.
Task
The standard system contains the following task types as subtypes:
Expiry of probation
Temporary contract
Pay scale jump
Work permit
Severe challenge
Training period
Dismissal protection
Expiry of inactive contract
Expiry of temporary contract
Personal interview
Vaccination date
End of maternity protection
End of maternity leave
Start of maternity protection
Follow-up medical
Submit SI statement
Submit AHV-ID
Prior attachment
Next appraisal
Work permit expires
End of leave of absence
The reminder date is the date on which you went to be reminded of the task.
This reminder date can be determined in two ways:
You can enter the reminder date directly.
If the operation indicator for the relevant task type has the value Blank or - (Minus) in Customizing, then the reminder date cannot fall after the actual task.
If the operation indicator has the value + (Plus), then the reminder date cannot fall before the task.
The system suggests a default date independently of the task type. This date can be overwritten at any time.
Regards,
Amit

Infotype 0019 Monitoring of Task

Dear All,
When Im trying to create Infotype 0019 system is not defaulting date in the field Date of Task. Client is complaining that earlier date used to appear in that field automatically.
I too understand that we have to give the date there manually. but client is insisting that earlier it used to be default.
Also as per the below link it is been given that date will defaulted. Can anybody tell me if there is some entries missing in any of the tables.
http://help.sap.com/saphelp_46c/helpdata/en/7e/5e04d34a1611d1894c0000e829fbbd/content.htm
Thanks
Ravi..

Hi,
"The system suggests a default date independently of the task type. This date can be overwritten at any time"
As given in the link for reminder date.
Reminder date is the date used to remind about the task type configured with the task date.The following configuration is to be carried out, i.e. PA->Evaluation Basis->Monitoring of Task->Determine task type. The reminder date is the date which reminds about the task u will need to perform.
There are 3 options to remind according to the configurations done, one is same as the task date, other is date before task date and the final one is date after task date. Selecting this will automatically create the required reminder date as per config.
If no time unit for follow up/lead time is given in the config part for your task type system automatically takes the task type date as the required reminder date.
Think it is clear now.
regards.
Edited by: Vishnu AG on Nov 11, 2011 2:11 PM
Edited by: Vishnu AG on Nov 11, 2011 2:18 PM

System monitoring, open tasks are no longer visible in Tcode DSWP

Hello!
I have patched my Solution Manager with the newest support packages and have the problem with system monitoring, open tasks. All the systems have a long_sid.
I have implemented the SAP notes 1065285 and 1076772, but it was not sucessfull.
As well as open tasks as system monitoring are no longer visible in the Tcode DSWP.
Has some one the same problem or can help me to solve this problem?
Thank you very much
regards
Thom

Hello Thom,
did have a look at SAP Note 1038134?
If you are using Solution Mnager roles for System Monitoring the authorization check has changed and you need to maintain authorization object S_SOLM_ACT.
Best regards,
annett

Silent Monitor and Call record with voice vlan

We are pretty new to CCX, and want to get silent monitor and call recording working. I've read a bunch of troubleshooting docs, and a bunch of the discussions here, but I am still unable to get it to work the way that I want.
Heres the setup. The phones are all set to the recommended settings, and the agent pc is plugged into the phone. The data vlan is 111 and the voice vlan is 222. When I run the nicq prog on the agent pc, it can not find the phone, but I can enter the ip in , and it sees the phone. The supervisor laptop can not monitor or record.
If I change the voice vlan to 111, nicq still can not find the phone, but the supervisor can record and monitor with no problem. Is is an issue with 802.1q and perhaps my nics do not support it?
CCX Ver:
8.5.1.11004-25

Hi
It could be, but it's pretty rare.
Have you enabled 'PC Port Voice VLAN Access' and 'SPAN to PC Port' on the phone?
Have you tried alternate PCs/laptops on the back of that phone?
Aaron

Monitoring Scheduled Tasks

Hi All,
I am using 'Scheduled Tasks MP v1.0.0.23' SCOM MP downloaded from
http://blogs.technet.com/b/yasc/archive/2011/10/17/scheduled-tasks-mp-v1-0-0-23.aspx
I have a new requirement now. For the monitor "Check Task Last Run Status" my client needs an alert only when the task failed for consecutive 3 times. How can I achieve this?
I also found another SCOM MP to monitor Scheduled tasks. Its at
https://rburri.wordpress.com/2014/08/12/scheduled-task-and-ps-scheduled-job-management-pack-1-2-0-500/
has anybody used this one? and know if this is better than the first one?
Thanks, S K Agrawal

Hi
you need to add consolidation module to the monitor.
refer below link
https://msdn.microsoft.com/en-us/library/ee809324.aspx
http://blogs.technet.com/b/authormps/archive/2011/02/24/consolidation-composition-tutorial.aspx
Regards
sridhar v

Monitoring audio during record session

I'm using Soundbooth (CS4) to digitize LP's on my Mac using an Audio Technica AT-LP120 USB turntable.
I'm able to capture the audio in Soundbooth, but I'd like to be able to hear the audio during the recording session.
I can't seem to figure out how to do that. Can someone give me a little coaching please?

There's a button in the middle of the recording dialog box called "Monitor Input during Recording".

Input monitoring problem during recording

Greetings,
I recently purchased Logic Pro 9, and am having a problem with input monitoring. I am not able to in any way affect control over my monitor mix during recording. I have tried every combination of options, including software monitoring, auto-input monitoring, etc...but always get the same headphone levels from my inputs (I am actually trying to mute the input signals out completely so that I can play along to only the click.
I am wondering whether this is some sort of software glitch, because I was able to control the mix perfectly before the latest software update. I wonder if that is the problem, or if I am overlooking some minor detail. Please help!!
BTW, I have checked, and this is definitely a software, not a hardware issue...
Thanks much,
Kevin

I have a similar problem, although I'm on Logic Pro 8.
I can't seem to record my guitar track (mic'd cabinet) without having the result monitor back through my studio monitors unless I turn off software monitoring in Preferences/Audio. But then if I want to record keyboards direct and listen to what I'm playing, I have to go back in and turn the option back on.
In Sonar on the PC, this was much more intuitive. You could arm a track for recording by clicking the "R" button, and separately toggle monitoring on and off by clicking the little speaker button to the right. You didn't have to constantly fiddle with the program preferences.
I have a FireWire410 interface, and the monitoring only happens when Logic is loaded. I would have thought that the little "I" icon was to turn monitoring on and off, but it's some "pre/post-tape" toggle I can't find a use for.
Kevin, how did you control your monitor mix before?

Monitor Delivery Task Escalations?

Monitor Delivery Task Escalations?
Should the monitor delivery task recipient be getting escalation notifications? If so, can they be prevented? When/Why are they triggered? I have service managers complaining because they are getting escalation emails but the service is still ongoing, waiting for tasks to be completed. How can a monitor task be late? It's not really a task. Thanks!

When the entire service is late -- meaning when the due date for the last task in the delivery plan has been breached -- the MONITOR Delivery task will also become late. When this occurs, any escalation notifications which are configured on the Plan tab will be sent for this task.
While the MONITOR Delivery task does not need to be completed like other tasks, it does have a due date -- that date being the due date for the last task in the delivery plan. When this task is late it means the entire se

Most straight forward approach for monitoring scheduled tasks in SCOM 2012

Hi,
This one should be easy (?): looking for the most straight forward approach for monitoring scheduled tasks in SCOM 2012.
Best regards
Thanks in advance, Best Regards

<Reference Alias="SC">
<ID>Microsoft.SystemCenter.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="Windows">
<ID>Microsoft.Windows.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="MicrosoftWindowsServerLibrary6063215">
<ID>Microsoft.Windows.Server.Library</ID>
<Version>6.0.7061.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="Health">
<ID>System.Health.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="System">
<ID>System.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
</References>
You also need to add/copy the reference for the Scheduled Tasks MP you are using for other OSs. The above is from the MP for Windows 2012 Scheduled Tasks. Most of the existing MPs available for scheduled tasks already cover Windows 2003/2008 R2, I just extended
support for 2012.

Enable Mic Monitoring ONLY During Recording or Record-Enabled Tra

Is there any way to monitor the mic inputs only when you're recording? I know that you can disable the output of the mic to the speakers (or enable if you want), but is there any way to automatically do this only when you've record-enabled a track in a program such as Sonar or Adobe Audition? Thanks for the feedback!Message Edited by PaneTrez on 06-07-2006 04:03 PM

which card you got ? and are you asking how to eliminate the feedback? well on my cards (x-fi and audigy 2, and li've 5.) i think you can do it with the bundled recorder that you get when you download the drivers from this site. I think creative recorder is the best one. Also creative mediasource should work (if you dont have Creative Recorder) just select recording source (which is your mic) In my opinion it does just as good of job as AA .5 (which I also own and use alot). I also believe I might have seen that option in AA, but it could be risky as it may interfere or conflict with your device. Only on my x-fi card have i noticed that it autmatically mutes the speakers while recording from mic (during Audio Creation Mode---I select Mic and select Monitor on Recording only) . Only other quick fix to it is simply press the mute key or my personal favorite use some earphones (not headphones cuz youll still get a little feedback at high volumes).Message Edited by djbonus on 06-07-2006 08: PM

Enable Mic Monitoring ONLY During Recording or Record-Enable Tracks

Is there any way to monitor the mic inputs only when you're recording? I know that you can disable the output of the mic to the speakers (or enable if you want), but is there any way to automatically do this only when you've record-enabled a track in a program such as Sonar or Adobe Audition? Thanks for the feedback!

which card you got ? and are you asking how to eliminate the feedback? well on my cards (x-fi and audigy 2, and li've 5.) i think you can do it with the bundled recorder that you get when you download the drivers from this site. I think creative recorder is the best one. Also creative mediasource should work (if you dont have Creative Recorder) just select recording source (which is your mic) In my opinion it does just as good of job as AA .5 (which I also own and use alot). I also believe I might have seen that option in AA, but it could be risky as it may interfere or conflict with your device. Only on my x-fi card have i noticed that it autmatically mutes the speakers while recording from mic (during Audio Creation Mode---I select Mic and select Monitor on Recording only) . Only other quick fix to it is simply press the mute key or my personal favorite use some earphones (not headphones cuz youll still get a little feedback at high volumes).Message Edited by djbonus on 06-07-2006 08: PM

Creation of IT0019 Monitoring of tasks record

Similar Messages

Maybe you are looking for