Creation of local field in ABAP Query

Please let me know how to create a local field in ABAP query. I am finding the option inactive in SQ01.

hi priya,
     *__Adding u201CLocal Fieldu201D (user defined field) in SAP Query_ :
There is also facility to add the user defined fields in SAP query output. Also we can provide calculation formula for calculating values for this user defined field.
Calculation formula consists of standard fields from standard SAP tables. So the values fetched for particular standard SAP fields from standard SAP tables get calculated as per the calculation formula defined for the user defined field and displays the value accordingly.
To do this first go to change mode for Query which automatically takes you to screen shown below and click on icon   , as below :
Then further screen will appears. So select the Field group and again click on the same icon button   .
Then switch on the Short names for the fields and give the short names to fields which we need to use in Calculation formula.
Give the short names and then created u201CLocal Fieldu201D, as shown in below screen shot. Also Short names are given to fields, which can be used further for calculation.
Defining Local Field u201CREM_QTYu201D along with its field type and Calculation formula.
  In this case we have 
  defined field type for new  
  field as similar to
  ORD_QTY and
  Calculation formula is  
Also its possible to have Conditional logic for Local field by putting Condition in u201CConditionu201D line.
Now activate this newly added Local field for coming it in output screen. To do the same again go to u201CBasic Listu201D and activate the Local Field as shown below :
i think this will help u

Similar Messages

  • Addition of checkbox and 2 fields in ABap query selection screen

    I need to add chack boxes and 2 fields in ABAP query which is using LDB QMI. can u pls let me know how to do that.

    Hi Tarun,
    I am still not clear with the problem..I guess you require plant in your selection screen which you have.
    i guess if you go to sq01tcode there is a option infoset query from where you can give your selection options and value.
    have you selected all the fields in infoset and made a selection screen?
    When you have done with your infoset you just need to diplay the fields and there is a automatic program generated.
    Let me know...

  • Add fields in abap  query

      Please let me know , how to add two fields in ABAP Query.  Please it  showing  two fields in list fileds  but i want to add two into one.

    Thanks  for  Inf
    Here I want  to  print total  of two fields  into  one  field,  where  concatenate  should  be there
    mv_abrmenge, mn_abrmenge  
    select ebelnr, htariftyp, csparte, cvertrag, cvkont, mbelzart, cbegabrpe, cendabrpe, mv_abrmenge, mn_abrmenge, e~budat
    from erchc as e
    join dberchz1 as m
    on ebelnr = mbelnr
    join erch as c
    on mbelnr = cbelnr
    join ever as r
    on cvertrag = rvertrag
    join eanlh as h
    on hanlage = ranlage
    where h~tariftyp in @[email protected]
    and c~erchc_v = 'X'
    and c~simulation = space
    and c~tobreleasd = space
    and e~budat in @[email protected]
    and e~simulated = space

  • ABAP Query: creation of local field (Subtraction between 2 dates)

    I want to create a local field which will calculate the number of days between 2 dates (for example, document date - posting date).
    What I did:
    1) Created the user group in SQ03
    2) Created the infoset in SQ02
    3) I'm stucked at the creation of the Query in SQ01. I'm at the «Create Query: Select field screen». I clicked on Edit --> Local Field --> Create. I selected the «calculation field» attribute. I clicked on the «Complex calculation button», but I don't know how to write my formulate DOCUMENT DATE - POSTING DATE.
    Thanks a lot for your help.

    Try these FM's to calculate difference between two dates..

  • How to display/create Local field in SAP query

    HI All,
    I'm new to abap query. I have to include a local field in the existing query. I know through SQ01->Edit->Local field we can display the Local fields, but the options under Local Fields menu option are disable even in change mode of Query.
    So, later through SDN found that, I have to Switch On the short names menu option. Even the sub-options in Short Names are disabled.
    Can any body please let me know how can we display the local fields to the change the formula and how can we create the new local fields in the existing qeury.
    Hope I'm able to explain my issue clearly.
    Thanks in advance.

    You can create the local fields in the "Select Field" screen. (Third screen after "Title, Format" and "Select Field Group") This option is disabled on the other screens.<br />
    <br />
    <i>Reference : <a class="jive-link-external" href="" target="_newWindow">Defining Local Fields</a> in <a class="jive-link-external" href="" target="_newWindow">SAP Query</a>.</i><br />
    <br />
    Regards,<br />

  • How to hide some fields in ABAP Query

    My ABAP Query has a long list of extracted fields. I wanted to set some of these output to "HIDE".
    This allow User the flexibility to decide what fields to show.
    How can I set the field to "HIDE" in my query?

    Hi Tim,
    You can do this by setting the Report layout variant in following steps:
    1. First define the parameter on selection screent for report variant.
    2. Data decelaration for variant.
    3. Value request to get already present variants on report:
    4. If doesn't choose the layout take out the default report layout.
    5. Initialize the report variant.
    6. Apply the variant to the REUSE_ALV_GRID_DISPLAY funtion module.
             Here to generate report variant first to open report output and then as per according to user set the layout of report using the layout icon of ALV with summation on value fields (as required) and create layout name.
    *Data Deceleration as below:
    Data :g_save(1) TYPE c,
    **      g_default(1) TYPE c,
    g_exit(1) TYPE c,
    gx_variant TYPE disvariant,
    g_variant TYPE disvariant.
    *First Define the parameter to give layout of Report variant.
    PARAMETERS: p_vari TYPE disvariant-variant.
    * Process on value request
    PERFORM f4_for_variant.
    * Selection-Screen Checking
    PERFORM pai_of_selection_screen.
    w_repid = sy-repid.
    PERFORM variant_init.
    * Get default variant
    gx_variant = g_variant.
    i_save     = g_save
    cs_variant = gx_variant
    not_found  = 2.
    IF sy-subrc = 0.
    p_vari = gx_variant-variant.
    FORM f4_for_variant .
    is_variant = g_variant
    i_save     = g_save
    e_exit     = g_exit
    es_variant = gx_variant
    not_found  = 2.
    IF sy-subrc = 2.
    MESSAGE ID sy-msgid TYPE 'S'      NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    **  ELSE.
    **    IF g_exit = space.
    **    ENDIF.
    ENDFORM.                    " f4_for_variant
    FORM pai_of_selection_screen .
    IF NOT p_vari IS INITIAL.
    MOVE g_variant TO gx_variant.
    MOVE p_vari TO gx_variant-variant.
    i_save     = g_save
    cs_variant = gx_variant.
    g_variant = gx_variant.
    PERFORM variant_init.
    ENDFORM.                    " pai_of_selection_screen
    FORM variant_init .
    CLEAR g_variant.
    g_variant-report = w_repid.
    ENDFORM.                    " variant_init
    **While Showing report pass the variant :::
    g_save = 'A'.
    i_callback_program = w_repid
    i_structure_name   = 'IT_MAIN'
    is_layout          = i_layout
    is_print           = i_print
    it_fieldcat        = i_fieldcat[]
    it_events          = i_events[]
    i_save             = g_save
    is_variant         = g_variant
    t_outtab           = it_main
    program_error      = 1
    OTHERS             = 2.
    IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    Many Thanks / Himanshu Gupta

  • Query: How to add new fields in ABAP query?

    Hi All,
    Can any one tell me how to add new fields in the ABAP query output?
    We have to add the new fields using query design or we have
    to add those in the background program(automatically generated behind query) by selecting new fields in the code?

    What kind of report? Usually, you have to add the field in the table declaration and then also in the SQL query. After that, include the field in what kind of report you are using.

  • Problem in Currency field in Abap Query

         I have created an additional field for storing the currency type.
         Based on some calculations i want to store the currency type into this additonal field.But the problem is that the currency field is not getting displayed in the report though i am getting the currency type in the additional field when i check it while debugging. Can anyone help me out...

      Is it ABAP Query problem(SQ01).If yes, then
      In tcode SQ02(Infotype)>press extras button(F5)>In right side you will find 4 tabstrip buttons.Press on Extras--> create variable with same type of currency.
    goto Field group button--> add this field to field groups.
    In record processing event after your calculations assign your value of cuurncy to this new variable.
    In tcode SQ01-->enter query name >F6>F6>F6>select your new varaible
    >Press on basic list button(shift+F4)>left side you will find additional fields Node From there select your new field-->Save come back and execute the query.Now  you will find your variable.
    Don't forget ot reward if useful....

  • How to make fields in field group as text fields in ABAP query

    Hi friends,
    I a have a ABAP query 85 corresponding to infoset A205,
    there is a field group in the infoset A205 and it contains some fields
    but some of the fields are made as text fields ................i want to know how to make these fields in
    the field group as text fields.
    there is a small icon  " T " on the field when it is made as a text field .
    Please help me
    Thanks & Regards

    IF you can specify which Field Catalog then it will be useful for us to provide appropriate answer.
    1. For Customer Master
    IMG> Financial Accounting New> Acs Recev and Acs Payable --> Customer Accounts --> Master Data --> Preperation of creating customer master Data --> Define Account Groups with screen layout (customers)
    In that you can create your own account group, and click Details Screen.
    There will Field Status header within that are listed three main areas
    General data
    Company code data
    Sales data
    When you double click these lines it will take you into "Status Group" Overview. Wherein under "Select Group" are listed fields Address, communiucation.... Double click on one group , you will bet aken into the group field wherein you will find 4 colums with indicators assigned to it. ( Suppress, Req. Entry, Opt Entry, Display) you can choose the required option. "Req. Entry" against the field. Click save after you complete your selections.
    2. Similarly you can do for Material Master in
    IMG --> Logistics General --> Material Master --> Field Selection --> Maintain Field Selection for Data Screens
    But be careful when you do it for material master as it is cuts across all the modules...

  • Including MANDT field in ABAP Query Report as output field

    Hi All,
    I need to display the client(MANDT) field in the ABAP Query Report as an output field.
    But in SQ01 where we select the fields to be displayed as output in query , this field is not visible.
    I later checked in the Infoset. Even in the infoset the field MANDT is greyed out and all other fields are active.
    Can someone tell me how to include the field MANDT in the output of the ABAP Query Report.

    self resolved

  • Search help for field in ABAP Query

    Hi Experts,
    For a particular field in standard table the search help(F4) is not maintained in the table level, which is used in a ABAP query.
    Is there any possibilities for user-defined Search help using InfoSet or Query?
    Please help me in this regard.
    Thanks in advance,

    Hi Bala,
    I understand your question better now.  Since you mention standard selections I assume that your InfoSet is based on a logical database instead of a table join, direct read, or custom data retrieval program.  You are correct that the AT SELECTION-SCREEN ON VALUE REQUEST logic I mentioned earlier will not work for the standard selections of a logical database.  The system gives you an error when generating your InfoSet if you try to use the standard selection name (in ECC 5.0 at least).  I've tried various tricks to attempt to get it to work, but so far no luck. 
    You could, of course, use a different logical database as your InfoSet basis (e.g. VAV has a matchcode on VBAK-VBELN) or create your own data retrieval program and change your InfoSet to use the custom program instead of a logical database.  In the second case you wouldn't need to deal with standard selections at all.  I understand that these solutions are probably not what you need and, in the case of the custom data retrieval program, would be more complex (it may not be worth it to write a custom program just to allow F4 help... or maybe it would be... just depends). 
    Please keep us updated if you find a way to do it.  I'll also report back if I happen to discover a way.
    Best Regards,

  • Increase length of output field in ABAP Query

    Hello All,
    I have one ABAP Query in which inside the  system  generated program for the Query, there is a write statement -
    write 030(020) anlav-invnr
    Because of this statement,  the field invnr is displaying in only 20 chars & the last two chars of the field invnr are not getting displayed.
    I want to display all 22 chars for field invnr.
    How can I increase the output length for this field.
    Please help.
    <vague subject corrected by moderator, please choose a meaningful one next time>
    Edited by: Thomas Zloch on Mar 3, 2010 2:34 PM

    Jain Arpita wrote:
    > write 030(020) anlav-invnr
    Means displaying INVNR field at 030th position with 20 chars width. To increase the width you just give 022 instead of 020 like below.
    write 030(022) anlav-invnr
    Edited by: Venkat.O on Mar 3, 2010 11:28 AM

  • How to sort the fields in ABAP query.

    Hi all
    I am not able to drag the fields in Sort tool box.
    Please help me how to add the fields in Sort tool bar.

    In SQ01, when we are creating a query, we can define the default sort sequence & Totals also.
    This can be done when defining the basic list.

  • Inserting addition field in ABAP query (SQ01) while generating reports.

    Please let me know the procedure of adding field and applying mathematical  formula in the query.

    have a look at the help <a href="">Creating and Changing Queries</a>. I doubt that you can add real formulas besides the predefined statistics.

  • ABAP Query - Local field creation error

    In SQ01, I created a query. when i try to create local field EDIT>LOCAL FIELD>CREATE. Its throwing error 'Reference field does not exist' Message no. AQ273.Can anyone please tell me how to create local field then?
    useful answers will be rewarded.

    When creating a local field in a query, you need to define the type of data it will hold. There is a radio button to select a "reference field" or you can specify the type of data directly. I believe you got this error message because you selected reference field but specified no other field in the query to use as reference.

Maybe you are looking for

  • How can i retrieve or install my lost wi-fi address?

    How can i bring back or retrieve,,,or re install my lost wi-fi address?my iphone4 setting?

  • Configuration/Setup for securing PI messages with certificates

    Hello Experts, I'm looking for some guidance/suggestions/direction in regards to installing and using certificates when exchanging data with trading partners via PI 7.0.  It's something new to us and it's been a bit of a struggle. In scenario 1, we w

  • JPEGs saved in CS5 show as red box in RoboHelp7

    I've been using CS2 at work and yesterday they upgraded me to CS5. Today, I was updating our manuals in RoboHelp7 and opened up one of the jpeg images in CS5, made some changes and saved it. Immediately, in RoboHelp, the image disappeared and was rep

  • Migrating User files to new User ID on New Mac?

    I bought a new iMac for my work to replace a PC. I am planning to try Migration Assistant on initial Start Up of a new iMac, and would like to migrate mainly all Mailboxes & folders, Calendar, Contacts.  I had planned to do this from the office PC bu

  • Error: Metadata EDISDEF for port SAPEC1, IDoc typ

    I am getting following error in my File-2-IDOC scenario. Could anyone please help me out? <b>Error: Metadata EDISDEF for port SAPEC1, IDoc typ CREMAS04 and CIM type  not maintained</b> I defined RFC Destination and Port properly.. Did I miss out anyt