Creation of Multi Provider, using InfoCubes | Error in assigning dimensions

Hi All.
I am tryin to create a multi provider using five Info Cubes,  sat A, B, C, D, E. Now all of them have chars and KF's. some  of them are common.
I selected the relevant info providers, then in the Identification part, I selected "Select All" for Chars/ Time chars as well as KF's.
now when I am trying to Activate the Multi Provider, it says  " No Dimension Assigned to InfoObject x, y, z and so. on ".
its clear that there is problem in assigning dimensions fr chars/kf's.
So in the Edit Multiprovider screen, I click on Dimensions. Then it prompts me to select "One" InfoProvider.( The options being from A, B, C, D, E) and if i select any one, (say A),the chars/KF's present in A, are getting assigned the dimensions, but the chars/kf's from other Info Cubes arent geting the dimension assigned.
what to do now? can any one help me out.please
points will be assigned..:)

Arun Kumar,
Things to do to create a multiprovider:
1. Select your infoproviders
2. Select the characteristics you need
3. Select the identification criteria
4. Select Dimensions and assign characteristics
Arun Varadarajan
Message was edited by: Arun Varadarajan

Similar Messages

  • Multi-provider can't add one time dimension

    I have created one multi-provider, saved. I can't activiate it, so I try to add one time dimension characterstic,. for example :
    Calendar Year/Month
    I right click the "Time" dimension, only I can change description. the " insert" menuitem is greyed out. so how to add one time characterstic?

    thanks.
    during activiation of multi-provider, another error below:
    Assignments for InfoObject 0VALUE_LC have not yet been maintained -> Long text
    Message no. R7645
    Diagnosis
    The MultiProvider definition contains an InfoObject that has not been assigned to the relevant InfoProviders.
    Procedure
    Choose Identification and highlight the assignment for InfoObject 0VALUE_LC, or remove the InfoObject from the MultiProvider.
    but I can't find "identification" , where is it?
    Edited by: Splinter on Nov 3, 2011 9:08 AM

  • To Create a multi provider

    HI guys can  you please help me with the steps to create a multi provider using
    PCA: Statistiscal Key Figures       0PCA_C02
    PCA: Transaction Data                 0PCA_C01
    There is no standard bussiness content multiprovider for this.
    Thanks
    K.Mohan

    Dear Mohan,
    For creating a Multiprovider first you have identify what key figures you want to see and what characteristics are common in the both the infocubes , and then create a MP , with the two cubes, select the characteristics and key figures , then maintain the dimensions , Maintain the Indentification ( in the sense the common characteristics , how they should be picked from the base infoproviders ) and the last step is to select the key figures , from which target they should be picked in the query. if you require from both , select from both and maintain the restriction in the query with the help of infoproviders..
    Hope it Helps..
    Thanks.
    Krish

  • How to see data in the multi-provider ?

    We have a multiprovider with the key figure as total stock, and its given as a non-cumulative kf which has a check mark next to it. Its getting data from the infocube to it, I mean there are 4 infocubes and 1 ods to the multi-provider. If I right click and see the infocube or the multi-provider and select the fields by rite click and I am unable to see the total stock kf. But if I click the actual multiprovider and click display instead of display data, I am able to see the keyfigures folder, if i expand that I see stock quantity folder and many other folders. If I expand stock quantity folder, there are 3 kf's ztotalstock, 0isstock and 0recstock. In those ztotalstok is non-cumulative checked. And I am unable to see the kf value when i rite click on the mp. So any suggestion to display the data by selecting a posting date in the mp. What my guess is , will there be any internal table/view to display the mp data. Please let me know any suggestions.
    Thanks for your time,

    Prasanth, entering the mp name in LISTCUBE is same as right click on the mp and click on display data, where it will give the selecting criteria for the fields. But here both will display the same fields, that is not my case. I am unable to see one of the key figure which is inside the mp, have you opened any mp. Please right click on it and choose display and then go to the key figures folder , if you open that you have lot of folders in it based on the category. IN my case its the stock kf folder and if you expand that there are three kf's out of the three, one is ztotal stock which is declared as non-cumulative kf, rite next to it, option is checked. So I think that is the reson we are not able to see ztotalstock kf , no matter in the listcube or display data option on the mp. Hope you got my situation. I know how to see the data in the multi-provider or infocube. But in this case its not displaying that ztotal stock keyfigure, but in the reporting we can see the data on the mp. My question is why am I not able to see the selection for that ztotal stock key figure , either in listcube or rite clik display data option. Did anybody face this situation.
    Thank You,

  • Incorrect Non-cumulative values in a Multi-Provider

    Hi everyone,
    I have created one Multi-Provider using Info-cubes 0IC_C03 & ZSD_C03.
    The requirement was to get the "Invoice value" instead of the "Stock Issued Value" in 0IC_C03.
    I have used the characteristics 0CALMONTH, 0CALDAY, 0MATERIAL, 0PLANT & 0SOURCESYSTEM in the MP.
    However, when i execute a query based on the Multi-Provider, I notice that all Cumulative Key-Figures are showing correct Values, but the Non-Cumulative KFs (Val Stock Qty etc) are showing incorrect values (Large Quantities are displayed).
    I am not sure why its happening? Please Help
    Regards,
    Srikar

    Hi Ram,
    Previously i was using a variable on 0CALMONTH for restricting the data which resulted in Incorrect NC values.
    Later on, when I changed the Restriction based on 0CALDAY, the query was working fine.
    Moreover I also included all the Characteristics present in the Validity Table of the Cube 0IC_C03 in the MP which i didn't initially.
    I guess those two changes made the difference.
    Regards,
    Srikar

  • Queries off Multi provider

    In terms of performance is there a noticeable difference between the following scenarios.  The queries will be built off a multi provider which consists of just 1 info cube has a provider.
    1. Multi provider is built with all the dimensions and dimension characteristics - a replica of the cube.  100+ queries are built off the multi provider
    2. A number of multi providers are built for a specific set of queries say 10 multi providers with 10 queries and each with a sub set of the info provider dimensions and dimension characteristics
    Thanks

    1. Multi provider is built with all the dimensions and dimension characteristics - a replica of the cube. 100+ queries are built off the multi provider
    2. A number of multi providers are built for a specific set of queries say 10 multi providers with 10 queries and each with a sub set of the info provider dimensions and dimension characteristics
    Performance aspect I guess both are same.
    Why we go for MultiProvider on top of 1 Cube?
    Reason if we are sure of the fields in Cube. (Liked Fixed fields) In later stage not much of change in structure will be done. Then Cube is good. (Reports does not have much effect) - In some scenario's if we want to delete a field. Then there would be a problem like deleting the data and reloading them back. Pain
    In some scenario's we are not sure of Cube fields it might add or Remove ,few more fields as enhancements like getting from other source (ODS or Cube). Then we go for MultiProvider. So that its easy to join other source and not to re -create queries.
    Also this is not a Mandatory. We have many other options. In later stage based on requirment we can create Multiprovider. Or we can copy queries across InfoProvider using RSZC.
    Thanks
    Sriram

  • I am trying to create a multi provider ? how to optimize my query performan

    hi,
    I am trying to creating a multi provider using four ods ? can anyone let me know how to optimize my query performance. Since my query takes a lot of time to get executed.
    If anyone has any docs for query optimization that is built based on multi provider pls do send it to my email id [email protected]
    regds
    haritha

    hi wond,
    Thanxs a lot for the quick response. Can you let me know how to create secondary indexes on ods and about partioning to be carried out.
    if u have any docs or url can you pls share. my email id [email protected]
    regds
    haritha

  • Activation error on Multi Provider which has Non-cumulative Cube

    Hi,
    My company has upgraded the BI 7.0 from 3.5.
    It is working fine so far.
    But I met the below message and could not activate it when I generate the multi provider which has Non-cumulative Cube.
    Define the characteristics of the validity table for non-cumulatives (Message no. R7846)
    And then I checked the Single cube but Single cube has no error.
    I think this is program error and searched the notes in OSS but could not find.
    Does any expert know this issue?
    Thank you.

    Hi lee,
    validity slice tables need to be defined for cubes using non cumulative key figures.
    In this we need to specify the characteristic combination on which this table has be maintained.
    The maintanence can be done from cube change mode, menu bar extras--> maintain non cumulative values.
    This table constantly gets updated with validity dates as we upload data.
    An report on this can be seen in tcode RSDV.
    Naveen.A

  • Can i create Multi Provider without using Cube

    Hi,Can i create Multi Provider for ODS and Infoobject with using any Cube and
    Can i create Multi Provider for Infoset and Infoobject.
    Please give me the solution.
    Thanks in Advance.
    Regards

    Hi,
    In BW < 7.0, you can create multiproviders using:
    - and/or InfoCubes
    - and/or ODS
    - and/or InfoSets
    - and/or InfoObjects
    You can also create InfoSets using:
    - and/or ODS
    - and/or InfoObjects
    In BW 7.0, you can add the InfoCubes in the infosets.
    Remind that the multiprovider is an union, the infoset is a join.
    Regards
    Laurent

  • Error:While creation of Classification view using-'BAPI_OBJCL_CREATE'

    Hi all,
    I am using function module -
    CALL FUNCTION 'BAPI_OBJCL_CREATE'
      EXPORTING
        OBJECTKEYNEW            = OBJECTKEYNEW1
        OBJECTTABLENEW          = 'MARA'
        CLASSNUMNEW             = CLASSNUMNEW1
        CLASSTYPENEW            = CLASSTYPENEW1
      STATUS                  = '1'
      STANDARDCLASS           =
      CHANGENUMBER            =
      KEYDATE                 = SY-DATUM
      NO_DEFAULT_VALUES       = ' '
    IMPORTING
      CLASSIF_STATUS          =
      TABLES
      ALLOCVALUESNUM          =
        ALLOCVALUESCHAR         = ALLOCVALUESCHAR1
      ALLOCVALUESCURR         =
        RETURN                  = RETURN1
    for creation of classification of material.But it gives me afollowin errors -
    1)Assignment does not exist or is not valid on
    2)Table   not supported for class type
    3)Assignment was not created
    in return table.
    Thanks.

    Hi,
      Please follow the below steps.
    Creating the Classification View using the Function module 'BAPI_OBJCL_CREATE'.
    Check the Class Type and Class Number which you are passing.
    Generally it will be Class type - 001 (Material Class) and Number will be ENGINEERING.
    It depends.
    But, what you can do is, Check material which has classification data filled.
    And just use the same class Type and Class Number Details.
    Try this way.It should work.
    To know the Available Class Types refer to table TCLA.
    Please let me know, if you want further help.
    Thanks & Regards,
    Vamsi.

  • Error: 1:n multi-mapping using BPM for file to file scenario

    Hi. Iu2019m trying to do 1:n multi-mapping using bpm scenario. I use file to file. Input file consists of many records and then I want many record to be transformed into many file at target system. I follow step in http://www.riyaz.net/blog/xipi-1n-multi-mapping-using-bpm/. However, I have a problem when file is retrieved in to XI. It doesnu2019t create any output file.
    When I look at SXMB_MONI, it shows u201CNo object type found for the message Check that the corresponding process is activated.u201D Besides, it shows error message "Unable to perform action for selected message" when i clikc at PE in SXMB_MONI.
    I have check at many previous posts with the same error message but still couldnu2019t solve it. I already activate my BPM and check that status in SXI_CACHE = 0. There is noting left in change list of my IR and ID.
    Here is my design and configuration.
    IR
    Data Type: DT_file_split -> for both input and output file
    Message Type: MT_file_split_sender, MT_file_split_receiver
    Message Interface: SI_file_split_in, SI_file_split_out, SI_file_abs_source, SI_file_abs_target
    Message mapping: MM_file_split for mapping MT_file_split_sender with MT_file_split_receiver
    Interface mapping: OM_file_split
    u2022     Source = SI_file_split_out
    u2022     Target = SI_file_split_in
    u2022     Mapping Program = MM_file_split
    BPM following this link http://www.riyaz.net/blog/xipi-1n-multi-mapping-using-bpm/.
    ID
    Import my Integration process
    2 Communication Channel for getting input file (CC_File_split_sender) and creating output file (CC_File_split)
    2 Receiver determination:
    u2022     Source system to BPM using interface SI_File_Abs_source
    u2022     BPM to target system using interface SI_File_Abs_target
    1 Interface determination:
    u2022     from source system to BPM
    u2022     Sender interface: SI_File_Split_Out
    u2022     Receiver interface: SI_file_abs_source
    1 Sender Agreement
    u2022     Commu. Component: Source System
    u2022     Using interface: SI_File_Abs_source
    u2022     Sender Communication Channel: CC_File_Split_Sender
    1 Receiver Agreement
    u2022     Sender Communication Component: BPM
    u2022     Receiver Communication Component: Target System
    u2022     Receiver Interface: SI_File_Split_In
    u2022     Receiver Communication Channel: CC_File_Split
    Anyone know how to fix this?
    Thanks,
    Pavin

    Hi,
    Yes, thats the problem.
    You are creating file from test tab of  1..N mapping .
    In case of 1..N mappping in mapping Extra tags of messages are addded to the data.As shown here:-
    Messages
          Message1
               MessageType
    When you use this mapping to generate xml message then it will add additional tags for <Messages> and <Message1>, which is not correct. it should only have structure of you MT.
    So remove start and end tag of <Messages> and <Message1> from your data file. Mentioned below in bold.
    <xml......>
    <Messages>
    <Message1>
    <MT_...>
    </MT_...>
    </Message1>
    </Messages>
    This should solve your problem.
    Regards,
    Sami.

  • How to copy Bex queires from another multi provider

    Hi Experts,
    I developed one new multi provider in dev box, i need to developed some queries on this multi provider but same queries having another multi provider.
    finally i need copy some exesting queries to another new multoprovider with different technical name? how to do that?
    Many thanks
    David

    Hi David,
      RSZC allows to copy queries from one cube/mutlirprovider to another cube/mutliprovider having same structure..
    if not you use the below procedure to copy between multiproviders of differnt structures.
    Function Module Name : -       RSZ_I_COPY_QRY_TO_CUBE
    Step :- 1
         Open the Function Module in se37.
    Step :- 2
         Set break point in the line below.
      IF l_subrc <> 0 OR l_is_compliant = rs_c_false.
         Itu2019s the check just below Infocube compliance check.
    Step :- 3
         Run the FM.
    Step :- 4
         Give the inputs for source infocube and target infocube.
    Step :- 5
         It takes you to the breakpoint set in the FM.
    Change the value of l_is_compliant to u2018Xu2019 in the Variable screen.
    Hit F8.
    Step :- 6
         The system takes you to the select component screen.
         Select the query and transfer.
    Step :- 7
    It now leads to Rename component screen. Rename the query as per naming convention.
         Hit Enter.
    Step :- 8
    You see a lot of error messages because of the incompatibility of the cubes. Just scroll down in the log to end. Your query copy message should be in green. If it is green that shows the query was copied
    Once the query is copied , you need to open the query on the target multiprovider and then you need to save in eitther cases..whether using RSZC of same source/target structures or using the above procedure for non simialar strcutures.
    Regards
    vamsi

  • Creation of Multi language Hot links in OracleAS Portal 10g

    Hi,
    Will Oracle App Server + OracleASPortal 10.1.4 will support multil language Hotlinks creations?. multi-lang capability(something like www.domain.com/test?lang=CN)
    Usually under htdocs folder we can create one folder ie as test and include .htm file will direct to that page.
    Can we use Javascript to achieve this or any portal page parameter to read the lang JP, CN, EN as parameters and it will show the Chinese Version of test Page
    could you please provide some suggestions on the above. Thanks
    Regards
    Sona

    Your question is not clear at all. What are you trying to achieve here...? Are you trying to read lang parameter and pass to your portlet based on which the portlet gets rendered in the respective language..?
    If yes, then you can have portal page parameter which will read the url parameter and bind that portal page parameter to your portlet.

  • Multi provider we have many cubes,but i want some of that how to fllter?

    multi provider we have many cubes,but i want some of that how to fllter?

    In the queries bring the 0INFOPROV (infoprovider) characteristic and restrict it your desired infocube or dso used in multiprovider.
    Hope this helps.

  • 0FISCPER Value Help is not working on Multi Provider

    Hi Friends,
    I Have created a query on Multi Provider (based two ODS) and when i click on the value help for 0FISCPER while executing the report, it just hangs up and keep running, but never givel any values wvwn after 5 hours (I did not observed for moreathan 5hrs, propably it might go for dump).
    The same Query with same selection varuiable on 0FISCPER gives the value help in just 30 sec in both Dev and QA systems.
    When i try to use the same value help on bothe the ODS, it was working fine in all Dev, QA and Prod environments. But same on Multi Provide is working only in Dev and QA, but not in Prod.
    One diff i sea, is larg amount of data in Prod, in bothe the ODS invloved in this MP.
    Can you guys pls help...how to resolve this. I even try with different possible settings for  MP  through RSDIPROP transaction
    Thanks,
    Venkat

    Hi Akhan,
    It is the same case even...if i run it from RSRT. It just hangup for past 80mts.
    I got some more information,
    When i try to do the same from portal...i have got below Error messages in Dump.
    Caused by: com.sap.ip.bi.base.exception.BIBaseRuntimeException: Jco exception thrown while executing function "BICS_PROV_GET_MEMBERS" against system "SAP_BW"
    Caused by: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: connection closed without message (CM_NO_DATA_RECEIVED)
    Pls do share...if you got any more suggestions.
    Thanks,
    Venkat

Maybe you are looking for