Creation of PM measuring documents after UD in calibration

Hi All,
There is a function module QFOA_QM_CHAR_TO_PM_E_POINTS (Follow-Up Action: Transfer of QM Charac. Results to PM Measuring Points) in SAP QM quality inspection configuration to create PM measuring documents automatically after the Usage decision. For that I have to create class characteristic in MIC to establish the link between MIC and the measuring point of PM equipments for automatic creation of measuring documents according to UD codes.
Can anyone please put some light how I can create the class characteristic for MIC and make a link between MIC and the measuring point of PM equipments.
Many thanks in advance.
kavita
Edited by: kavitash on Sep 15, 2010 2:59 AM

Hello,
Please refer this threads which will clear your doubts
[Re: Linking MIC and Batch char using class char.;
[CLASS CHARACTERISTICS LINK WITH MIC;
Regards,
Rakesh

Similar Messages

Enhancement for MB1C/MB1A before creation of an Accounting Document

Hello everyone,
Actually I want to get the material document number(MBLNR) before the creation of an accounting document when using the transaction MB1C or MB1A.
I will have to use the value 'MBLNR' to update a field during the creation of an accounting document(the field SGTXT should be updated with the MBLNR).
I have already tested the following BADI's which provide me the value of the material document number:
- MB_DOCUMENT_BADI (BAdIs During Creation of a Material Document)
- MB_DOCUMENT_BADI_SAP (BADI for Creation and Changing of a Material Document)
and I am using the BaDi 'AC_DOCUMENT' to update the required field with the material document number(MBLNR).
The problem is that the BADI's 'MB_DOCUMENT_BADI ' and 'MB_DOCUMENT_BADI SAP' are call after the creation of the accouting document(after the BADI 'ACDOCUMENT') meaning that I can't used these BADI's as the value MBLNR is not available before.
My idea was to export the value to memory ID before the creation of accounting document and import the value in memory ID in the BADI's 'AC_DOCUMENT' to update the field SGTXT.
I am currently looking for other enhancements or BADI's which can help me to solve this issue.
After much research on the internet, I did not succeed in finding a suitable hint which can help me.
I would be grateful if someone could guide me(even a small hint will help me a lot as am I am new in the world of BADI's) on how to find a suitable way to get the document number(MBLNR) before the creation of an accounting document(before calling the BADI 'AC_DOCUMENT').
Thanks a lot in advance for you help.
Kind Regards,
Bryan

Hi
I had a look through the program and found an enhancement spot ES_SAPMM07M available through out. Sadly i am not able to create a material document in my system some master data issue but there are various enhancement points in this enahcmenet and you need to debug on save and find the right enhancement point to export the value.
Put a break point in the following includes which have only one subroutine in them
MM07MFF9_F_SEGMENTE_BEWERTEN
MM07MFF9_F_SEGMENTE_ERSTELLEN---> In this accounting item are created. If stops here and in debugger change the value if it works then there are various enhancement spot for the same.
MM07MFF9_F_SEGMENTE_ERZEUGEN
MM07MFF9_F_SEGMENTE_GENERIEREN
Hope it helps
Nabheet
Edited by: nabheetmadan09 on Feb 1, 2012 3:49 PM

Runtime error while saving the billing document after creation

hi friends ,
while saving the billing document after creation , the fallowing discriptive runtime error has come.
Run time errors -
SAPSQL_INVALID_TABLENAME
Except. -
CX_SY_DYNAMIC_OSQL_SEMANTICS

Dear Unnam,
There may be several reasons...
1. If u have enhanced the tcode with some z tables,and that might not be moved properly to prod or not active in data dictonary.
2. u may not be entering proper data to the input fields.
3. please check if u have added any z tables to the std tcode.I am exepcting this prob.u may not moved the table or enhancement properly to prod server,
Please check it...
Thanks N Regards
SettyKY

Bapi - function module Measure document creation

Hi All,
I need to know the bapi function module which is used to create the measure document creation in IK11 transaction.
Points will be awarded.
Thanks and Regards,
vinoth.

Hi,
Try the following BAPI/Fun Modules:
BAPI_MPID_CREATE
BAPI_MP_DATED_CREATE
Regards,
Anji

Authorization for Measuring document creation

Hi,
i have one issue. I want to provide authorization for measuring documents creation. That has been done by providing the different authorization groups in roles for T codes IK11, Ik12 etc to the users. Now users with a authorized authorization group for perticular measuring point can create a measuring document fo that. But the problem is that despite the authorization group, if user goes to t code iw41 for order confirmation , there he can create measuring documents of any authoprization group. How to control that thing. I also give authorization group authorization for t code IW41 but still it is allowing for the creation of documents. any help on this thing.
Regards,
Aman Sharma

Hi
there are two ways you can control the measurement reading entry
1. Block the authorisation of IK11.When you go to confirmation screen through IW41 , there a button for measurement document update. Even the user will press it system will not allowed to enter in it as he is no authorisation
2.You can configure the screen template for overall confirmation and use this profile while doing overall confirmation using iw42. There you can hide the measurment detail screen.
customising node " Set Screen Templates for Completion Confirmation "
Regards
Amar

Problem while automatic creation of measuring document

Hello everyone,
my client requirement is to track the usage hours of the PRT used for maintenace order.
i have created the PRT as equipment with category P and assigned measuring point(counter) in the default values.
Then the PRT is assigned in the operation of the breakdown maintenance order,so when i tried to confirm(IW41) the operation(to which PRT is assigned) the measuring document is not created automatically.
Please let me know if ant setting needs to be done.
Thanks in advance
Santosh

Hello,
Can anyone let me know whether this is possible in PM module as i know it works in PP.
Thank you
Regards
Santosh

Fleet-Primary counters creation nd updating records in measurement document

I have made the required config for fleet management. Defined Units of measurement, Positions of measurement for fleets, and calculation method. My doubt is wen i create fleet master using ie31, how do I create the measuring positions/primary counters and assign it to the vehicles in the "Vehicle ID/Measuremnt" tab page.
Please explain me the following steps
How to create measuring points and measurement documents to record daily Fuel consumption and distance travelled
How to calculate the consumption data on daily averge basis for short and long run.
I read the SAP Library document link but unable to understand.
please provide ur inputs, basic t-codes and step by step procedure.
thanx for ur time n input.

IFCU - How to enter the readings ?
IN IFCU, No stock possible for this material
Fleet management
Fleet Managment - Fuel consumption & Mileage in MCIZ
MCIZ report - Fleet management

Issue for creation date of Billing document in third party ???

Hello SAP Folks,
This issue is related to third party scenario. The basic requirement is to create to a billing document with a creation date same as
Good issue date of Sales Order.
For your information, with the help of enhacement we have passed on the value of posting date of material document generated
from MIGO to Goods issue date in Sales Order. I am very much aware that setting up a new copying routine would help me but
relating the GI date field of Sales Order from the techincal point of view is a complete work stopper. Could anyone throw light on
the workaround for mapping this case ???
Regards,
Sarthak

Hello,
Thanks Alex for your input on the topic !!
But i would like to say that the billing relevance of the item category has to "B" as this process of Third part Sales talks about creation of billing document after the MIGO. And i am basically interested to Populated the posting date of MIGO for Biling creation date.
In Sales Order, the GI date is modified to Posting date of MIGO through enhancement. I have been looking around relevant tables to fetch the GI date of Sales Order but not getting the right track...
Could anyone provide any other workaround to implement this sort of requirement ???
Eager to hear from Lakshmipathi ...
Regards,
Sarthak

Display of measurement document - t-code IK17

hi,experts,
my clients requirement is to analyse power consumption vs cost in machinewise.from pm aspect, i had suggested to enter power consumption in measurement document but at the same time client's requirement is to have the display of cost also.means suppose 1 unit of power consumption costs Rs.4/- .Now if they enter 4 unit in measurment document total cost should be automatically calculated by system i.e.Rs.16.So.at the month end they want to see how much power is consumed by a particular machine and what is the cost involved for that power consumption in a single screen.At the time of creation of measuring point,there is a field called conversion of measurement unit,can we map this scenario with this concept.please,give some solution how we can address this problem.
rgds
rajib

You can create a sales order with the following two condition types.
1. PR00 - Price per unit
2. EK02 - Cost per unit
By entering the power consumption as a material and the delta usage of power as quantity you will have both.
No development required. Also check with FI consultants if PR00 can be configured to not hit the revenue accounts. That way you can then treat as a report or write a simple query to get a report.
Bala

Exit or Badi to block document after Reset Cleared Items in FF.5

Hi,
When you run FF.5 and some rejected documents are returned by the bank, I have to block the document after reset cleared items with a especific payment block key.
Anyone already done something similar?
Tks!

Hi Rao,
<b>Userexits</b>
VMDE0004     Shipping Interface: Message SDPACK (Packing, Inbound)
VMDE0003     Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0002     Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0001     Shipping Interface: Error Handling - Inbound IDoc
V53W0001     User exits for creating picking waves
V53C0002     W&S: RWE enhancement - shipping material type/time slot
V53C0001     Rough workload calculation in time per item
V50S0001     User Exits for Delivery Processing
V50R0004     Calculation of Stock for POs for Shipping Due Date List
V50R0002     Collective processing for delivery creation
V50R0001     Collective processing for delivery creation
V50Q0001     Delivery Monitor: User Exits for Filling Display Fields
V50PSTAT     Delivery: Item Status Calculation
V02V0004     User Exit for Staging Area Determination (Item)
V02V0003     User exit for gate + matl staging area determination (headr)
V02V0002     User exit for storage location determination
V02V0001     Sales area determination for stock transport order
<b>Business Add-in</b>
DELIVERY_ADDR_SAP     Address Change in Delivery Processing
DELIVERY_PUBLISH     Announcement of delivery data during database update
Reward pts if found usefull
Regards
Sathish

CS/SD - Link from transactions: Measurement Document x Notification?

Hello all,
vs: SAP ECC 6.0
I need to create the following Customer Service process:
It is created Measurement Document based on a counter reading. For that we use transaction Measurement Document (tcode = IK11/ IK12 IK13)
Process I need to create:
From each Measurement Document we must create a Sales Order (tcode = VA03).
Relation One to One - 1 Measurement Document will generate 1 Sales Order.
From Notification transaction (IQS2), it is possible to create a Sales Order. That is fine! Then I am thinking to use this functionality.
My question is:
How is done the LINK from transaction Measurement Document (tcode = IK12/ IK13) to transaction Notification (IQS2), Is there any standard solution (transaction) to do that link?
Many thanks in advance,
Barbara
Edited by: Barbara Barbos on Sep 18, 2008 5:26 PM

Wow Stephan,
Many thanks for your answer.
I already tried and YES....
- from create Notification transaction (IW51), I created tha Measurement Doc and after this I created the Sales Order from the same same IW51 transaction.
100% helpfull answer.
Thanks again & regards,
Barb

Unable to Inport Measurement points and Measure documents from R/3 to clien

Hi,
I am not able to import measuring points and measuring documents into the client device even after assigning the measurement point varaint in the back-end config.
Please help!
Thanks & Regards,
Kanwar

Hello Kanwar,
I am thinking of two reasons at the moment.
1. The equipments/Functional location which you had downloaded to your device were not having measurement points. If this is the case, you need to make sure that corresponding Equip/FL's are there on client (provided case 2 is not valid)
2. The measurement points were not replicated. Hope you had checked MEREP_207 table for the required measurement points.
Hope this helps.
Best Regards,
Subhakanth

Measuring Document

Hiii,
After creating measuring point,in measuring Docu. i have some problem regarding:-----
Counter reading
Difference
TotalCtrReading
in
dis three option and there effect in measuring document...
So plz reply wat is dis 3 option and on which basis we have enter their reading...
Thanks
Abhishek Vyas

Hello,
The fields you mention have the following meaning:
Counter reading
This is the current value taken from the counter device at your measuring point. May be the reading on a odometer or some other counting device.
Counter difference
This is the difference in counter since last reading. This difference is added to the previous reading to give current counter reading.
Total counter reading
This will be the total of all readings so far. So if you enter differences then this is the total of all readings.
You may also want to consider reading transfers and counter overflow when considering what these values mean.
See PM help:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/b0/df293581dc1f79e10000009b38f889/frameset.htm
Look under - Technical objects - Additional functions
-Paul
Please use Enterprise Asset Management (EAM) forum for PM/CS specific topics
Enterprise Asset Management (SAP EAM)

I have just updated Acrobat to version 10.1.13. I am using a MAC Running Yosemite. When I try to scan a document, after the printer scans Adobe Acrobat quits and I get an unexpected closure error.

I have just updated Acrobat to version 10.1.13. I am using a MAC Running Yosemite. When I try to scan a document, after the printer scans Adobe Acrobat quits and I get an unexpected closure error. I am running Mac OS 10.10.1. This only started happening when I installed the update of Adobe Acrobat.

Hi MEW1,
Is the printer connected wirelessly or wired?
Go to Preferences and under categories go to > Convert to Pdf then select the Image Capture and then hit ok button.
Close Acrobat and then relaunch it and see if it helps you while you do scanning.
Regards,
Rave

Problem with Office 2013 documents after PC resumes from sleep

Have a number of PCs in a work environment that exhibit the following error messages when they are woken from a sleep state and the user was working on a Word or PowerPoint document via a network share.
PowerPoint error: The file you were working with was modified during suspend mode, and the original version is no longer available. <file path and name.ppt> must be re-saved.
Word error: Word cannot establish a network connection with this document after the system resumed from suspend mode. Save the document into a different file to keep any changes.
Having searched the error message I can see that hot fixes were created to fix the issue in Word 2007 and 2010, but nothing seems to relate to Office 2013.
All the PCs have the latest OS and Office updates.
I tried the NetworkAvailableTimeInSeconds reg fix from this link - http://support.microsoft.com/kb/2626998/en-gb , and obviously applied it to the Office 2013 key, but to no avail. The additional steps talk about applying the available hot fix, but this
is not applicable to Office 2013.
Information:
All PCs Windows 8.1 Enterprise and Office Professional Plus 2013
Any help would be appreciated.
Thank you.

I have the same issue with 8.1 and Office 2013, and yes, Office is at SP1 (15.0.4631.1002). I've likewise done the Reg fixes suggested for 2007/2010, but still have the issue. Any insight would be appreciated.
Thanks,
John

Creation of PM measuring documents after UD in calibration

Similar Messages

Maybe you are looking for