Creation of project, Project ID any number ranges are there?

Hi Saran,
Project ID have Project Code and Description
you can use Project ID which is a unique identifier for every project as a reference example shown.
here ZCHARM is the Project ID ...you can also use numbers if required.
There is no no. range concept for Projects
Hope this clarifies
Thanks
Prakhar

Similar Messages

BP creation in CRM WebClient - Role and Number Range assignment

Hello,
I have the requirement to specify a particular number range and BP role when an Account is created in the CRM WebClient Interface.
For example as standard, when an employee is created through the CRM WebClient (BSP component BP_EMPL) the default employee role (BUP003) and the default number range are assigned to the BP.
I would need to specify a different number range and role to the employee
I've tried to configure the Account Identification profiles (activity "Define Account Identification Profiles" in customizing); with that activity you can specify which role and which number group you want to use for the BP (account) creation. However this customizing is affecting the IC WebClient only and not the CRM WebClient.
I was wondering if a similar customizing activity exists for the CRM WebClient (in particular for the BP_EMPL application), or if there's a way around this.
Anybody has an idea about how to solve this?
Any help would be greatly appreciated, thank you in advance.

Hi all,
I have done this by defaulting the bp group in the BADi
1.Go to the se18 and select BADI_CRM_BP_UIU_DEFAULTS and select the interface IF_UIU_BP_DEFAULTS
2. Go to the method IF_UIU_BP_DEFAULTS~GET_DEFAULT_VALUES and you can write your logic here to default the grouping.
In my case I wanted all accounts created to be defaulted to a particular grouping and my code looks like this
lv_name1 = lr_current->get_property_as_string( iv_attr_name ='BP_CATEGORY' ).
                    IF lv_name1 IS NOT INITIAL.
                      IF lv_name1 = '2'.
                        lr_current->set_property( iv_attr_name = 'BP_GROUP'
                                   iv_value = '0060' ).
                      ENDIF.
                    ENDIF.
Thanks & Regards,
Sanila

Message no. 8I766 Number Ranges are not maintained For Extended Withholding

Dear All,
I am facing the following problem when i am trying to generate the withholding tax certificate
1.) Message no. 8I766 Number Ranges are not maintained For Extended Withholding Tax
     Number Ranges are not maintained for Business Place and Section. Check entries in tables J_1iewt_cert (for Business Place) or J_1iewt_cert_n (for Section Code) and j_1iewt_certno in EWT.
I have checked all the above tables and found that the entries are maintained
2) When i am trying for print priview and then print its generating spool request and the certificate is getting saved -
> here the following problems are faced
      A) . TDS Number is not coming
      B).Details Of the tax deductor ( Name , Adress , TDS Circle , TAN & PAN is not coming Where       to update these details
      C) In Amount Paid / Credited Column - Some fixed amount is comming irrespective of the actual amount credited
Please help me in soving the above issues
Thanks & Regards
Arun.R

Hi
You need to maintain Section Code wise number range . Go to Sm30 Select Table J_1IEWT_CERT_N and maintain it.
Thanks
GG

Applicant Number Ranges are getting skipped

Hi,
In my client's production server while entering initial applicant data the internal number ranges are getting skipped.
For Example someone has done Initial Data Entry for the Applicant, the Applicant number generated is 40. Then in the next entry it is taking 45.
This skipping of Applicant numbers are quite erratic sometimes 5, sometimes 7, sometimes 10 etc.
Samriddhi

Just wondering if you found a solution to this. I am experiencing the same issue.

Why most of the number range are maintain year wise

Hi,
I want to know why most of the number range like Part1 and part2 57F4 Challan goods issue , GR, number range are maintain year wise.
regards,
zafar

Hi ,
There may be a lots of documents in a business . But SAP has provied limited no for documents ( upto 999999999). So if you are running your business for a long time , it may happen that the no. of documents may go beyond this no.Year wise no range allows us to use the same no . in another year . So that the combination of fiscal year and document no is sufficient to uniqly identify one document .
Regards,
Anupam

I want to reverse a cheque tell me if any std methods are there

I want to reverse a cheque tell me if any std methods are there
Regards

Try
BAPI_ACC_BILLING_REV_CHECK
Regards

Can you take the SIM card from an IPad and transfer it to a NEW Ipad (not yet purchased) without any problems? Are there any complicated steps involved? Thanks.

Can you take the SIM card from an IPad and transfer it to a NEW Ipad (not yet purchased) without any problems? Are there any complicated steps involved? This is for my boss.
Please let me know. Thanks in advance.

Simple answer is YES.
The only caviat is for instance in the UK some iPads are locked to a specific network provider and therefore if the new iPad is locked then it will only work on the specific network it is locked to.

Project Name - Internal Number Range

Dear All,
When we create a solman project, manually we give the project name. Want to know whether it is possible to give a internal number range from which the project number should be picked automatically when we create a project.
Thanks and Regards
Saravanan.p

Hi Saravanan,
You can assign an internal number range with respect to the Project name.
Go to TC <b>CRMC_NR_RA_SERVICE</b>
there by selecting the interval tab you can define the number range in which you want your support desk message corresponding to the project.
hope this will help you out, if not then post your recent error.
Rgds
Manas

Some external number range are not valid for equipment creation

Hi All,
What could be the reason even though the external number range is maintained for equipment category as a combination of ALFA Numeric, for certain combinations, system accepts while creating Equipment and for certain combination of ALFA numeric number, system is throwing error " equipment number not in external number interval".
Waiting for your valuable inputs..
Thanks
Surya

Hi
As your define No. Range is :000AAA-1000 to 000ZZZ-9999.You can Not use No which Involves the Alphbatic Value as "AAA" As it is begaining of your number range .You can Check another upcomimg number which just fall after "AAA" is "ABA"it will accept.Number which come with "AAA" will not accept by system.So you need to start your numbering form the next number of your Define Lower Limit(starting point) value that is "ABA-....."
Regards,
Rakesh

Number ranges are in the Inactive mode.

Hi friends,
I am getting a problem with number ranges. When I am at Number ranges screen the options display only in active mode. change intervals and enter intervals are not in the active mode. How can I set this number ranges to be active and can be used. The same problem I am facing with the document number ranges. Please anybody help me in this regard. Thank you in-advance

Hello,
It would be authorisation issue. please use TCode SU22 and find if you have authorisation for object "S_NUMBER"
Regards
Lavanya

Stumped: Cannot see imported images in a project...but they are there!

I recently imported a set of images into a project in Aperture 3. The item count in the project shows as 550, but when I click on it, only 368 images are displayed. Huh?
If I use the "In the Last Week" Smart Album, I see the images there. Aperture won't let me drag them into the project I want them in, so I know they are there.
Why doesn't Aperture show me the latest images in the project?

So, turns out that there was indeed a filter applied. Nothing was typed into the search field in the upper left of the image list, but there were two small icons there, one looked like a pushpin and the other I couldn't identify. No idea how they got there, but once I clicked the "X" to clear the search box, all of the images were displayed. Strange, since I don't remember doing anything to set up a filter.
Thanks for your help, everyone!

Excise Number Range ARE-1 Country Wise

Hi,
I want to configure a the scenario i.e. in ARE-1 there should be number country wise number range. I had checked in the Tcode SNRO there is a object called J_1IARE1 where the number range for the excise group which is dedicated for the outbound deemed excise.
If the invoice is for japan then excise group series should pick it up for japan,if it is bangladesh,it should generate for bangladesh. Is it possible to apply it through abap? If it is kindly provide some guidelines for it.
Waiting for a positive response.
Thanks & Regards,
Yakul Bharwal
Edited by: Rickky.vn on Nov 28, 2010 8:55 AM

i suppose u ca use a user exit for it...
program name RVSAFZZ..or something like this
it has got an exit by name number_exit...
hope u understood and its clear...

Any free downloads are there XSLT mapping tool

Hi all ,
any free down loads are there XSLT mapping tool , i need to enchance the mapping which is already done in XSLT mapping there they have done look ups also using java codinh , i do have just XSLT file in import arichive , so please help me in it
thanking you
sridhar

Hi ;
Refer this
XSLT mapping
/people/prasadbabu.nemalikanti3/blog/2006/03/30/xpath-functions-in-xslt-mapping
Mudit

I purchased and install iWorks 09 in 2009 ; what is the current version number and are there any updates for Mtn Lion?

What version of iWorks 09 in PAGES should I be running with Mtn Lion? I originally installed iWorks from a disk back in 2009 and thought I was keeping up with updates. Curerntly I have version 4.2 (1008) Thanks for your help.

Thanx anyway - I got question answered ... Caninemiss

I can't download any of the updates i have, also i can't download any new app , are there any problems with the app store ?

Does any one has the same problem ? I can't download or update any app using app store from the mobile

I am not able to download any app in the App Store. The download circle starts to spin and stops again after a few seconds.

Creation of project, Project ID any number ranges are there?

Similar Messages

Maybe you are looking for