Creation of  purchase order automatically  by taking  purchase requesition

Hello Gurus
Is it possible to create purchase order  automatically  by taking purchase  requesition  no from  sales order?
i checked in all the  forms  couldn't find  any answer .
thank you  in advance
regards
venkat

Hi Venkat,
When you save a sales order that contains one or more third-party items, the system automatically creates a purchase requisition in Purchasing. Each third-party item in a sales order automatically generates a corresponding purchase requisition item. During creation of the requisition, the system automatically determines a vendor for each requisition item. If a sales order item has more than one schedule line, the system creates a purchase requisition item for each schedule line.
Purchase orders are created from purchase requisitions in the usual way. But If you want the Purchase orders to be created automatically, then you should automate the creation of purchase order by creating a job or using workflow. Other wise to create a PO from PR use ME57. A third-party order is usually created referencing a third-party item in a purchase requisition. You can create purchase orders in this way individually or collectively. For Configuring Automatic PO kINDLY PLEASE LOOK into this.
"http://help.sap.com/saphelp_47x200/helpdata/en/94/da2e3b2bdab96be10000000a114084/frameset.htm"
Kindly please let me know If you need any more information on this.
Regards,
Ram Pedarla

Similar Messages

  • Purchase order Automatic creation

    Dear All,
    I want to configure the Transportation scenario,
    My requirement is when shipment is created a purchase order should get automaticaly for purchase of services from transporter...
    Can anyone hap me out with this??/
    Regards
    Rasik Waghela

    Forwarding to financial accounting for the creation of accruals requires a service entry. Every service entry sheet is based on a purchase order. Determining this purchase order is the first stage for forwarding to FI and therefore the first stage required for carrying out settlement
    This purchase order must first be created in Purchasing. Important criteria for the purchase order are:
    Service agents
    Purchasing organization
    Purchasing group
    Plant
    Item category
    You must create the purchase order for a service agent. The purchase order can be valid for the following periods:
    Day
    Week
    Month
    In Customizing the purchasing organization, the purchasing group and the plant must be assigned to the corresponding transportation planning point and the shipment cost type. You make these settings in the IMG. Choose Logistics Execution ® Transportation ® Shipment costs ® Settlement ® Assign purchasing data.
    rgsd
    madhu

  • Create purchase order automatically from Sales order.

    Hi,
    I have ticked  Create purchase order automatically check box in item category TAS and TAB but still not able to generate Purchase Order automatically.???
    any clue.
    thanks/ashu

    You need to have your prerequisites in place for the automated creation of the purchase requisition before the purchase order can be raised:
    You may already have done this, but check that your material has the purchasing information on it (trxn MM02, purchasing tab), that a purchasing information record exists for that material and vendor in that purchasing org (trxn ME12), check that a source list exists as well (trxn ME02). If you have created the source list or purchasing info record after the sales order has been created then you will need to go into trxn ME56 to assign them manually. That should release the PO to be created.
    In standard 3rd party, the PO is created using ME59 (prog RM06BB20), which can be run as a batch job.
    Jon

  • How can I convert of Sales order to Purchase order automatically?

    How can I convert of Sales order to Purchase order automatically?
    It is a TPSO (Third party sales order) situation, I am using item category as TAS, it automatically converts Sales order to (PR)Purchase Requisition.
    But can I convert Sales order to (PO)Purchase order? without any manual intervention?

    Hello,
    you can't create a sales order with reference to a purchase order. You can input customer PO nuber in the sales order Purchase Order number filed.
    Prase.

  • Net price on purchase order with reference to purchase requisition

    Hello!
    When I create a purchase order with reference to purchase requisition, the net price goes automatically to the purchase order.
    But It's possible change the net price on PO, and I must close this possibility.
    Do you know how can I do this?
    Thanks, Camila!

    Hello
    Try to search SCN for EVO
    You will find this: PR price in PO

  • Program for Creating Purchase Order with reference to purchase requisition

    Hi ,
    I need to Create purchase Order with reference to  Purchase requisition,
    in my case i need to automize the Process which is happening in MD04,
    Can you please suggest me ?
    Thanks ,
    Murali

    Hi,
    Plz check this link. It will be helpful to you.
    Purchase order creation with reference to PR
    We can also create the PO Using the BAPI_PO_CREATE1 function module.
    In this function module fill up the all necessary Details.
    With details in Item Table we haveto give the Fields PREQ_NO and PREQ_ITEM for each item .
    then it will creates the PO with PREQ.
    Thanks & Regards,
    Sarita Singh Rathour
    Edited by: Sarita Rathour on Aug 3, 2009 7:01 AM

  • Purchase order with referance to Purchase  requisition

    Dear All,
    This is the requirement of <b>Purchase order creation with reference to Purchase requisition  only at the same time this requirement need to control particular document  type ( Ex: Standard purchase Order) only .</b>Based on this other document types should not effect.
    Please give me the proper solution  for above.
    Regards,
    Krishna

    Dear Krishna Raju,
    There is no configuration for the Purchase order with reference to Purchase requistion..
    We can customise the Purchase order with reference to Purchase Requistion through the funcational authorisations.
    For this,
    Define Functional Authorisations in the customizing for Purchasing, there we can unmark PO w/o reference allowed.
    Functional Authorisation, like ''abc'' create with <b>T.Code OMET</b>
    Assign ''abc'' to a Parameter ID ''def'' with the <b>T.Code SU52</b>
    Mostly this Purchase order authorisations will be give BASIS consultants. Pls approch them for more clarity in this regard.
    With regards,
    B.Ravindranath

  • Help Bapi Purchase order with reference to purchase requisition no

    Hi,
    i used BAPI_PO_CREATE1 for creating purchase order with reference to Purchase requisition number but im getting these error
    please help me to solve this
    1 E BAPI 001 No instance of object type PurchaseOrder has been created. External reference:
    2 E MEPO 001 Purchase order item 00010 still contains faulty schedule lines
    3 E 06 054 Doc. type/item cat. NB/S (requisition) <-> NB/ (purch. order)
    4 E 8W 162 No schedule line exists for schedule line number 0010000030 00010 0000.
    Thanks & Regards,
    Azhar
    Message was edited by:
            Azhar

    Hi Azar,
    I am also getting the same messages, did you get resolve the issue.

  • Purchase Order with reference to Purchase Requisition

    Hello
    I have this situation:
    One Purchase Requisition with quantity of 10.
    When I issue a Purchase Order with reference to this purchase requisition, for the moment I can use this Purchase Requisition many times. For example: two Purchase Order with the same purchase requisition, same item and same quantity.
    The objective is thay the system only allows to use the Purchase Requisition until the quantity is completed. For example: one purchase order for 10, or two purchase orders with 5 each. But never with a quantity superior to the total quantity in the purchase requisition.
    Somebody can help?
    Thank you,
    Elena

    Hi,
    1) By setting the configuration paths as suggested by the previous posts.
    2) In the first place, when converting a PR in PO Create Screen (ME21N), you should make the Open only and Released only field as Display. This way, the results will only show Open and Released PRs to be converted to PO
    Hope this helps

  • Purchase Order with reference to Purchase Order

    Dear SAP Gurus,
    Can it be possible to have a purchase order with reference to purchase order.
    Regards
    Vinod Kakade

    Hi,
    there is an option to give document date in the Purchase order selection in Document overview, what you can do here is that you can get a TVARVC variable created with date range of today - Today - 179 Days, in the attributes of the variant enter the TVARVC variable so that when the user uses this variant, he will get PO's only for that date range, if you  have any confusion on this then please speak to your ABAP Consultant.
    Regards
    Chandra Shekhar

  • Automatic creation of Sales Order with reference to Purchase Order

    Hi
    I want to create the sales order automatically when we are creating the purchase order.
    kindly guide me how to do it,
    Pramod

    Hi
    U can create BDC for Tcode VA01 in T code SHDB with the validation and ask the ABAPer to create one Y/Z Tcode. Then you input the PO no in the Tcode to create the SO in background.
    Or
    Create BDC for PO AND SO and give logic and validation with input field and ask the ABAPer to crate one Y/Z Tcode to create PO and SO in single execute.
    Thx.

  • Creation of Purchase Order automatically via PR after mrp run.

    Hi Experts,
    I want  to know that , after MRP run  i got the no of PR'S. As i know , through MD04  i can create purchase order from particular pr but is their any option from which purchase order  get generated automatically from pr's which are generated afrer MRP run.
    Thanks n Regards
    Anupam

    Hi,
    You can maintain source list Tcode ME-01 and make it MRP relevant by selecting Sorce list MRP relevant. In sorce list you can maintain vendor and material data valid for particular period and make it MRP relevant.
    With this you can automatically generate purchase order from Purchase requisitions after MRP Run.
    Regards,
    Tushar Patankar

  • VMI - ORDRSP IDOC to create a Purchase Order automatically

    Hello All,
    I would like to simulate the VMI process. Which data in a ORDRSP IDOC (Message variant VMI) has to be filled at least, so that from it an Purchase Order is created automatically? Does anyone of you have an example IDOC - maybe in the XML format?
    Thanks in advance
    BR
    RMP

    Hi Hanuma,
    For creation productin order IDoc, you can use standard program RCCLORD and FM CLOI_MASTERIDOC_CREATE_LOIPRO.
    For creation purchase order IDoc, you can use FM IDOC_OUTPUT_ORDCHG or IDOC_OUTPUT_ORDERS.
    There is customer exit available for you to populate new status and order number.
    Hope this will help.
    Regards,
    Ferry Lianto
    Please reward points if helpful.

  • Create service Purchase Order automatically at goods issue in VL02N.

    Hi Friends,
    Please give me steps on how to write the ABAP code To Create  service PO automatically at goods issue.
    Technical Info
    •     BAPI BAPI_PO_CREATE1 is to be used for creating the service PO.
    •     The service PO will be only created for YLF deliveries.
    •     The PO will be created only if the shipping conditions field ( LIKP-VSBED ) has any value except 3rd party or Customer pick-up.
    •     The PO needs to be created when goods issue is performed on the delivery.
    •     The PO needs to be created with the following values :
    1.     Purchase order type : YB
    2.     Vendor : Header partner function SP, Carrier
    3.     Plant : LIPS-WERKS
    4.     Material : 10
    5.     Account Assignment Category : K
    6.     PO Quantity : 1      
    7.     Net price : LIKP-NETWR
    8.     Cost Center : 54434
    •     On failing to save the PO, the error message should be generated so that the user knows the error and can fix the error and create the PO manually.
    Please help for this urgent req.
    thanks.
    Message was edited by:
            anjan
    Message was edited by:
            anjan

    Sure. Here it is:
    Go to SPRO.
    Logistics Execution
      Transportation
        Shipment cost
          Shipment cost document
             Shipment cost type and Item category.
    For the shipment cost item category you are processing, lets say standard 0001 (Transportation costs). double click on it.
    You will find all you need in the tab SETTLEMENT.
    There, there is a field GENERATE PO.
    Select one of the options:
         Do not generate purchase order
    A     Generate purchase order for validity period of 1 day
    B     Generate purchase order for validity period of 1 week
    C     Generate purchase order for validity period of 1 month
    Once the shipment cost is created and transfered to MM(settled), if there no open PO for the carrier, the system creates one.
    Good luck,
    Leonardo De Araujo

  • Purchase order automatic amount determination with scales

    Hi,
    I have a problem with the automatic definition of amount of a purchase order item on the basis of the scales defined for a condition type (only for a material, the others are ok).
    As you can see in the attached images I have scales dedfined from 300 pieces, so, when I put 200 pieces, system should give me an error or set the amount of the more similar scale, but instead the system sets the value 4,21, that I have for 600 pieces! And very strange thing is that if I go in analysis, I can see that value setted was 5,33 and then manually modified, but it's not true: I've not modified. I tried to do all again and always error for that material code.
    Why? What should I check?
    Thank you

    Info record (subcontractor).
    Here the scales of other item (different scales):

Maybe you are looking for