Creative Inspire T6100 5.1 Speakers and Creative Vision M 30 GB

hey i wonder if you could help me, i would like to get some Creative Inspire T600 5.1 Speakers
for my vision m but i have read some reviews that you need 3 audio inputs to get all the speakers working so there isn't much point in buying them unless any of you know if there is an adapter or speakers like this in the same price range which will work fully with my vision m. also would these speakers work off a tv?thanks very much
Message Edited by big7george on 05-3-2007 04:24 AM

Hi all do you have any idea to solve my problem?
Currently, I'm using the P5800. My problem is sub can't working. I fix together with SB24Bit External sound card.Previously is working. I'm very proud with the sound,after I decrease the master volume and bass level volume my sub suddenly quit.what happened actually?
-Is that mean I need to change the sub speaker or the coil inside the magnet core is burned?
-or maybe my component circuit like ic,capacitor,diode burned?
If I plug n unplug the power to the sub,I can heard that 'bump'. Is that mean my circuit in good condition or maybe the charge and discharge for capacitor?
Please answer me...
Thank You

Similar Messages

Creative Inspire T6100 5.1 Speakers problem

Hello. I have Creative Inspire T6100 5.1 Speakers with SB Audigy Live! 24-bit installed Sound Card (it supports up to 7.1 speakers). Also I have Stereo Surround CMSS 3D settings (EAX)enabled. However when I'm listening to music or playing games my Rear Left speaker makes no sound. Before I had problem that Rear Right wasn't working (however rear left and right sound was on rear left speaker), but after replugging Rear Left doesn't work. Any ideas what might be the problem?
Thanks for reading...
EDIT:: I tried changing Rear Left and Rear Right speakers with each other in Subwoofer (where it connects) and Rear Left is working properly.
Message Edited by Ripiz on 03-15-2008 10:52 AM
Message Edited by Ripiz on 03-15-2008 10:57 AM

Hi all do you have any idea to solve my problem?
Currently, I'm using the P5800. My problem is sub can't working. I fix together with SB24Bit External sound card.Previously is working. I'm very proud with the sound,after I decrease the master volume and bass level volume my sub suddenly quit.what happened actually?
-Is that mean I need to change the sub speaker or the coil inside the magnet core is burned?
-or maybe my component circuit like ic,capacitor,diode burned?
If I plug n unplug the power to the sub,I can heard that 'bump'. Is that mean my circuit in good condition or maybe the charge and discharge for capacitor?
Please answer me...
Thank You

Creative Inspire T7700 - Only frotn speakers and sub work?

I recently bought a new Dell Vostro 400 PC with a 7.1 surround sound soundcard. I decided to also buy the Creative Inspire T7700 surround sound system.
I have got it all set up, and when I run the sound demo on every individual speaker, they each sound on their own, however when playing games, listening to songs or watching movies, only the subwoofer and two front speakers make a sound.
Please can someone advise? Should I buy a creative sound card too?

Fri3ndly,
Most sounds that you will play within windows are stereo. This means that they are encoded with left and right signals only. Typically only DVD's and some games support 5.1 output. If you are getting a Creative sound card, you might want to consider the CMSS feature that will allow you to upmix stereo channels to virtual surround.

Creative Inspire T6100 5.1 Speakers

Im looking at buying these speakers for my boyfreind, but will they be able to work with his tv and PS3. I was just wondering if any one new! many thanks beth

The line out on your mac is 2 channel stereo. There probably is a way to wire all the speakers together but you won't get 5.1 surround, which would be a waste of all those speakers.
I think your best option is to buy a good PCI sound card. The M-Audio Revolution 5.1 has good reviews, seems good value and probably addresses your problem.
Peter

Creative Inspire P5800 5.1 Speakers Only the subwoofer and front 2 speakers work HELP!!

Hello,
I have got the "Creative Inspire P5800 5.1 Speakers." I have connected all the speakers to the subwoofer and plugged my Creative Zen Vision : M into the AUX socket on the back of the subwoofer using a jack to jack cable. When i play music only the subwoofer and the front right and left speakers work is there anything i can do to change this? (I have got no Computer involved)
Any help would be appreciated,
Chris.

Hi all do you have any idea to solve my problem?
Currently, I'm using the P5800. My problem is sub can't working. I fix together with SB24Bit External sound card.Previously is working. I'm very proud with the sound,after I decrease the master volume and bass level volume my sub suddenly quit.what happened actually?
-Is that mean I need to change the sub speaker or the coil inside the magnet core is burned?
-or maybe my component circuit like ic,capacitor,diode burned?
If I plug n unplug the power to the sub,I can heard that 'bump'. Is that mean my circuit in good condition or maybe the charge and discharge for capacitor?
Please answer me...
Thank You

Help setting up Creative Inspire T6100 (5.1) to HP Laptop

Hi I recently bought Creative Inspire T600 (5.) speakers. I am unable to connect this to my HP DV6T laptop having only one input for speakers where as creative t600 has 3 pins in black, orange and green colors. I am stuck here. Could anyone please tell me how to connect the 5. speakers to my laptop? Appreciate your help.
Arun.K.S

Not really 100% sure (I only have a Creative T3030 2.1 that has a single 3.5mm jack) but from everything that I Googled, it looks like a stereo 3.5mm to RCA adapter and a Logitech 5.1 Game Console Adapter should work.
http://www.amazon.com/Belkin-Audio-Cable-Splitter-1-Mini/dp/B00004Z5CP/ref=pd_si m_e_5
http://www.amazon.com/Console-Adapter-Convert-Plugs-Single/dp/B0006U3ACY/ref=pd_ bxgy_e_img_b
But to be safe, it might be best to check with Creative and see what they recommend for connecting it to the iMac.
http://us.store.creative.com/Inspire-T6100/M/B000LIDLV6.htm
Dennis

Creative Inspire T6100 - I got a problem, pls help me!

I just bought a creative Inspire T6100 system, but I got a strange problem.
I can hear just from the rear left and center speakers, all the others are muted. Every wire is perfectly connected to my phase 22 with 3 jack connectors. I tried to disable the basic soundblaster in the motherboard(I got an asus P5K), but it's the same... nothing changed...
Can someone help me pls?

Hi Freddy I read your problem , here I have a solution for you . If you are using your motherboards existing inbuilt sound card then you arerequired to check the balance level. to check balance level. to check the balance you please click on start > control pannel > then click on " sound & audio devices"? In this menu click on " Advance" here you will found balance level of both master volume & wave . checkbalance sould be at center level. secondly go into your cards application software and select 5.1 or 6.1 speakers,to check the sound take a headphone and attach each output of sound card if sound is coming both channels then it meanssound card is ok. Check your T6060 speakers audio leads should be fully Inserted into sound cards socket. If your are using creative sound card then set it to factory default setting and check the problem will be automaticaly solved. Creative T6060 speakers are 5.1 speakers & it requires proper sound card . It is recomended to install creative Sound blaster5.1 or Creative Audigy Value sound card for exelent performance. Harjinder KlerCyberstar Infocom LtdChandigarh

Creative Inspire T6100

my old creative set up has broke and now it is time to renew. my problem is.... i have a 5.1 decoder amp it sends the sound out separately to front L,R, back L,R, center and sub. this allows you to power them all separately. i am considering buying 2 sets of the creative inspire t6100 one set for the back L,R and one for the front L,R. and i would like to know what other users of the t6100 think of the system more to the point how many users have had problems. i am reserved on weather creative speakers last very long as my 2 sets of fps1600 have broke ( set the sub went and the other sounds like it is under water) and my 2.1 i-trigue 3200 (5 months old) (center speaker on my set up) is having problems with the wired remote. i am reluctant to switch companies as i think when working properly creative have an amazing sound. i would like to know if any one has any opinions on logitech (rival company if you will) as i have never heard anything from their speaker range. http://images.europe.creative.com/is.../dot-clear.gif

Hi
try cheking this link:
http://forums.creative.com/creativelabs/board/message?board.id=speakers&message.id=486&view=by_d ate_ascending&page=
and try do what is explained there
cumpz
PS: sorry my english

Creative Inspire T6100 Connection Problem ...

Hi,
I have just purchased the Creative Inspire T6100 and intended on using them for my Laptop, I am not so good with technology but I bought these speakers purely because of the good reviews it had.
The PROBLEM I have is that when I connect the 3 wires i.e. Black, Green and Orange , I only have space for one headphone jack on my Laptop as a result sound only comes through two of the fi've speakers. I realize that all 3 headphone jacks must be plugged into my laptop, but I simply do not know where to place the other two.
Therefore I was wandering is there some sort of device which would allow me to connect those 3 wires into my laptop. Perhaps some sort of 3 to converter
(Please remember I am a complete Novice on technology)
Any help would be appreciated.
Thank You

Hi Freddy I read your problem , here I have a solution for you . If you are using your motherboards existing inbuilt sound card then you arerequired to check the balance level. to check balance level. to check the balance you please click on start > control pannel > then click on " sound & audio devices"? In this menu click on " Advance" here you will found balance level of both master volume & wave . checkbalance sould be at center level. secondly go into your cards application software and select 5.1 or 6.1 speakers,to check the sound take a headphone and attach each output of sound card if sound is coming both channels then it meanssound card is ok. Check your T6060 speakers audio leads should be fully Inserted into sound cards socket. If your are using creative sound card then set it to factory default setting and check the problem will be automaticaly solved. Creative T6060 speakers are 5.1 speakers & it requires proper sound card . It is recomended to install creative Sound blaster5.1 or Creative Audigy Value sound card for exelent performance. Harjinder KlerCyberstar Infocom LtdChandigarh

Creative Inspire 4.1 4400 speakers

Hi, I just bought a new set of creative inspire 4.1 4400 speakers. I haven't got a 5.1 sound card. Can I just use it as a 2.1 instead, i.e. don't connect the other 2 rear speakers?

Yup, that will work fine. Make sure you unplug the input at the speakers too (so only one input lead is connected).
You could also use a 3.5mm headphone splitter at the pc side so the front sounds come from the rear too (and put the rear speakers next to the front speakers?).

Creative Inspire 6.1 6600 Speakers

I have Creative Inspire 6.1 6600 speakers. The "Wired Volume / Base Control with Power Switch and Headphone Jack" is malfunctioning. In fact, when I turn the volume control on, the green LED on top does not illuminate. And because of this bad control, I do not have sound. Can anyone tell me how and where I can replace this control? Your assistance is appreciated. Thanks very much.
Charles

I'm also having the exact same problem, and so is a friend who has the same speaker/soundcard setup. Any help is appreciated!

Can i use my 5.1 Inspire speakers and 1 pair of stereo speakers to create 7.1 set

Can i use my 5. Inspire speakers and pair or stereo speakers to create 7. setup ie 5. + 2.0 = 7.
I am using Creative Audigy 2 ZS soundcard.
If yes, how?
please help.
Message Edited by hymarathe on 08-05-2005 0:53 AM

If you want TRUE 7. (i.e front centre, front L + R, rear L + R , side L + R )then I doubt your sub-woofer has the correct channel outputs to plug speakers in correctly (5. systems do not have side channels )
If you just want 7 speakers ,use 2 RCA splitter's ( A/V Coupler - 2 RCA (female)to RCA (male) )on the two rear channel outputs on the subwoofer.
This will give you Front Centre , Front L+R , 2 x Rear L , 2 x Rear R = 7 , not TRUE 7. but it will work.
I have done similar with my 6. Creatives ( i.e connected two speakers to my rear centre output channel using an RCA splitter ) to get 7.
Hope this hel
ps.
Cheers,
Mark

Creative vision m: transferred downloaded video is playing upside down and mirrow

Hello
I have a creative vision m and when transfering downloaded video, playback is upside down and mirrowed... HOW DO I PREVENT THIS? quality is great and sound is great.

getting the same thing!! dont have a clue why - it only seems with the transferring to the low quality video?

Center Speaker plays center sounds and rear sounds. Inspire 5.1 5300 speakers.

My inspire 5.1 5300 speakers are set up for 5.1 surround sound. I have CMSS enabled. I hear static from the rear speakers. Everything seems to be set up just fine. But when I run the speaker test the front right, center, and front left work. The rear left and rear right speaker sound comes out of the center speaker instead of the rear speakers even though the center speaker also gives out the correct test sound.
I have an audigy card, SB0090 is the model number. I don't know the retail name.
Message Edited by lukivah on 04-24-2006 10:22 AM

I dont see how the sub wont work. It has the seperate front, rear, and center in. The sub should work with just the front in as far as i know. My SBS 450 seems to work that way... i have yet to get my inspire 5.1 working but ill find out if i happen to..

Creative vision m 30g and zencast videos

Hello,
I recently won a creative vision m 30g from ebay. When I try to transfer vidieos from zencast to the creative zen
vision m, I am receiving an error message, the videos are not transferring. I have Windows Vista Basic. Any
help would be appreciated. Thank you.
Bridget Ferrazzano

A lot of ZenCast video content is in a format the Zen can not play (usually MP4). The files would need to be converted to a file format it can play.avi,wvm9. This program can convert files for playback on your Zen & has a preset for the player. http://forum.stage.creative.com/show...?t=50370#M2983

Creative Inspire T6100 5.1 Speakers and Creative Vision M 30 GB

Similar Messages

Maybe you are looking for