Creative L3500 Speaker system and Soundblaster Audigy 2 ZS Soundcard (I have a driver probl

Yes I have had a driver problem so i went to the download section of this site and picked up a driver program for my soundcard yet it doesn't work. When i do uninstall my soundcard (i need to uninstall current driver to install new driver)and i restart my comp after removing the old one i get sound, but i notice i don't get very good sound, not as good as my old before it stoped working. But then after i install new one it just doesn't work!
Please help me if you know about drivers!!!!
PS: I use windows XP and if you need any more info just request it from me.Message Edited by Nick345 on 02-28-200605:05 PM

JRe: Soundblaster Audigy 2 ZS Platinum - Speaker issues not covered by FAQs0 I'm afriad that the CMSS3D option did not work? ? I still cannot get any speakers to play out of the rear of the soundcard.
As I said before, the goal is to try to get sound to play out of both the headset and the speakers attached to the rear of the soundcard simuntaneously.
The headset is plugged into one of those devices in the front that is in a 5 & /4" bay that has the individual knobs for adjusting volume for the headset and outbound levels for the microphone.
The speakers are plugged into the back of the soundcard and do not play any sound in any of the sockets, starting from the firewire port and counting 3 over.
Any suggestions? I? thought it might have something to do with the setting of the speakers from control panel - > Sounds and Audio Devices -> Advanced and picking the right choice there. No luck however. Same for the Creative Speaker Settings as well.
I'm at wits end and I'd be very thankful to whoever can resolve this for me. =)

Similar Messages

  • I got new speaker system and i plug ipod in and try to play music and it wont but it will charge

    i got new speaker system and i plug ipod in and try to play music and it wont but it will charge. How do i fix

    - Make sure that the iPod is fully seated in the dock.
    - Does the manufacturer of the dock say it will work with your specific model iPod touch and its iOS? Not all dock work with all models and iOSs. Users have reported that when the updated the iOS on their iPod and broke compatibility.

  • I have an Iphone 6 plus. Can the bluetooth connect to the cars speaker system and a Garmin HUD unit at the same time?

    I have an Iphone 6 plus. Can the bluetooth connect to the cars speaker system and a Garmin HUD unit at the same time?

    Hi,
    Normally yes, Bluetooth can connect to multiple devices at the same time, so yes.
    The only thing is that you'll be able to send sound/music to only one at a time, but I understand the Garmin HUD doesn't play sounds.
    cheers

  • PLEASE HELP: installing my Soundblaster Audigy LS-soundcard with the latest hardware(bundle)drive

    Problem:
    I have a Soundblaster Audigy LS Soundcard in one of my PCI slots (I already tried the other slot with the same result). I run Windows XP professional SP2.
    When I install the hardwaredriver-bundle version: Sound Blaster Audigy LS .04.0055, I have no problem, but when I install version .0.4.077 (in this example: or I install version 055 or I install version 077), I have the following problem: (through Control Panel) in system properties/hardware/device manager, I find PCI Device listed in " other devices " with a black exclamationmark in a yellow circle, while the SB Audigy LS is listed in the group " sound, video and game controllers ". The soundcard works, which is great but why is the exclamationmark showing? I already tried a different PCI slot, IRQ assignement in BIOS, but is still shows. The strange thing is, if I install first version 055 and then version 077, the problem is gone. A new problem that occurs if I do so, is that the PC hangs when starting Windows (but I'm not sure if that has to do with the fact that I install version MediaSource 5 Player-Organizer 5.20.23 over version 5.0.38, just to keep the MediaSourceGo! Toolbar (because it's no longer part of the softwarebundle version 20.23 - which has been confirmed by the support of Creative), the same with version of CD Burner Plugin 5.0.44 over 5.0.3 because it's not really clear on the website, if you need the previous version or if it's a full "update"). Please URGENT (with detailed info on every explained problem/issue - so I can try to resolve it) help.
    Thanx,
    Oli4
    Message Edited by Alejandrootje on 0-02-2008 09:55 PMMessage Edited by Alejandrootje on 0-02-2008 09:56 PMMessage Edited by Alejandrootje on 0-03-2008 0:38 PMMessage Edited by Alejandrootje on 0-06-2008 02:9 AM

    maybe you should ask Eugene Gavrilov (?) to write his KX-Drivers for MSDOS too.. maybe he'll do so if you donate him an Audigy 4 *lol*

  • I am trying to use logic pro 9 on my lion system and it continues to say I have a bad midi...when i go to check my midi drivers folders in my library its empty...does anyone know whats going on?

    i am trying to use logic pro 9 on my lion system and it continues to say I have a bad midi...when i go to check my midi drivers folders in my library its empty...does anyone know whats going on?

    I
    got your message about making sure to use the machine specific disk that came with my machine. Unfortunately, Apple no longer sells Tiger replacement disks. I've got a couple of bids out on ebay, and will update when I have news to add to this post.
    Thank you for your help, Frank!
    To be clear you called the 800 number and explained what the situation was, old machine and lost the original DVD's?
    Just checking because if you just called and tried to buy the DVD's they might tell you they no longer sell them but you aren't really trying to buy them your trying to replace the ones that are missing.
    Ebay may work but there is a certain specificity to the DVD's required which, even if they seem right, might not work.
    Good luck either way. If you get a chance when you get the DVD's I'd be interested in hearing how it all works out.
    regards

  • Logic 5.5 and Soundblaster Audigy 2 NX

    Hi,
    Apologies if I ask some realy dumb questions, but I'm a complete novice in terms of this sort of thing.
    I have Logic 5.5 for my PC and have bought the Soundblaster Audigy 2 NX to use with the program so that I can record guitars, bass, and vocals for my band. I have gone through the process of installation via the CD supplied with the sound card, but Logic will not allow me to do any recording. I am reliably informed that this is to do with the fact that I don't have any ASIO drivers (not really sure what that means though!).
    Is there somewhere that I can download (preferably for free!) the necessary drivers to make the program work, or is the product unlikely to work at all?
    Any help is appreciated.
    Cheers,

    Maybe Asio4all - http://www.asio4all.com
    jutapa

  • I am unable to connect to the itunes store. I have tried via wifi and cellular. Operating system and itunes are latest versions. Have powered down the ipad and restored settings. Can puchase new songs and apps with no problem....just can't update apps.

    I am unable to connect to the itunes store to update apps on my ipad.
    I have tried both wifi and cellular connections.
    I have the most recent updates of the operating system and itunes.
    I have powered down and reset and restored.
    I have no problem purchasing and downloading new apps or songs.
    Please help!

    Refer to this article"
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368

  • I want to uninstall my version of adobe elements 11 in order to upgrade my operating system and then re-install. I have the original disk but not the code or registration info - where can I find it or how can I contact someone who can help me?

    Do I have to alert adobe if I'm moving my product from one computer to another? or will they recognise my intentions when my product is removed from their database?

    Is there a way to export my movie timeline (as in the organisation of my
    clips, not just the movie)  to a external hard drive. I thought publish
    would help but I'm unsure and the export button under file doesn't light
    up. I'm using Elements 11 and I'm trying to save it to a hard drive so I
    can unistall the program, upgrade my operating system and reinstall.
    Message was edited by: Christopher Hewett
    On Tue, Dec 30, 2014 at 12:14 PM, Barbara B. <[email protected]>

  • Had to reinstall operating system and now I can' t use my iCloud drive because it says my user id is already using the drive!

    I had to reinstall the operating system on my computer and now I can't access my iCloud drive.  It says the user id is already using it.  Help!

    Yeah I have the original CDs. And I have backed up some stuff. But shouldn't things like safari and itunes be working anyway? The applications are there, they just won't open. Someone told me would lose my preferences and just had to update them again, but I can't do so cause safari doesn't work and internet explorer won't let me get on certain sites...

  • I need to conect my hp printer and scaner but i don't have the driver sofware

    I NEED TO INSTALL MY PRINTER AND I DO NOT HAVE THE DRIVER SOFTWARE.
    WHERE CAN I GET?

    Hi
    You have a couple of options as I see it please find the steps given below to add your printer or go to HP website mention the product number off the printer select the operating system and download the software.
    Add Printer
    Click Start then select devices and Printer the select Add Printer then select Add a local printer Use an existing port -> Next select the Printer from Manufacturer list and select the Printer from Printer list click Next and follow the Instruction.
    Let us know how it goes!
    *Although I am an HP employee, I am speaking for myself and not for HP.
    ****Click the White Kudos star to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards,
    Manjunath
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Windows 2000 and Soundblaster Audigy 2ZS probl

    When I go to set up my Inspire T7700 7. speakers my highest choice in the control panel is 5. on the speakers? Is this a limitation of Windows 2000? I have the latest updates for 2000 on both the service packs and latest driver updates for the card. I was using this card in an XP system before and I did not have this problem. I was able to select 7. when using XP.

    Why bother with Microsoft?
    They didn't even add in 6. in Windows XP
    Seriously, use Creative Speaker Settings.

  • Having trouble using my 5.1 surround sound speaker system and can't configure itunes to use it

    With my Logitech Surround Sound Speakers Z506 I am listening to music with itunes and i have 5 speakers total with a subwoofer, the configuration is two front, one center, two rear, and a subwoofer. The front , center and subwoofer are fine but the rear pair speakers do not have any playback with them. I am wondering if you don't mind helping me troubleshoot this problem.
    Thank you have a nice day
    Cole

    Well I'm not using Vista I'm using XP SP2 and I have the same problem.
    On the windows sound control panel there is a button called speaker volume. when you click on it you get a bunch of sliders with channels -8. Ive discovered that if I move the master sound control in any of the Creative Sound modes software Entertainment/Audio Creation or Gaming the channel sliders in the windows control panel numbered 3-7 all go to zero which stops the surround sound working. It leaves channels and 2 and 8 alone which can be changed with the sound control in the creative software.
    Even checking move all the slides together option on the windows control panel is cancelled as soon as I twitch the main sound control. It's driving me nuts. I keep thinking I must be missing something really obvious here but alas I can't think what.
    Ive tried lots of different solutions to no avail. Interestingly when I tried to use the autodriver update thing on the creative web site it said that i am using Vista and you'll have to download manually. Which I did and still didnt resolve my problem.
    Sorry no solutions just more problems lets hope someone can help!
    Edit - Just discovered - I have XFi Pro if I use the I/O Console volume dial it works fine, but if I use the software volume control it all goes wrong. Think I posted in the wrong thread as well as this is vista but it just seemed so relevant.
    Message Edited by Gramuldy on 04-29-2008 :45 PM

  • T3030 speaker system and TV audio output.....

    I hooked them together with the Charter HDTV box in place and they worked fine. Discontinued the Charter subscription back to basic only and rehooked the speakers to the back of the TV audio out.
    Nothing........nada, zip.
    Nothing coming out of the speakers. Plugged them into my Bose unit and they still play just fine...............go figure.Wondering what on the TV needs to be changed, or adjusted to get the speakers to pick up output?SidAlpena, Michigan? 49707

    :smileyindifferent:??I have been all over the internet and this forum and nothing addresses the simplicity of the hookup other than plug in the plugs and listen.................hmmmnnn. What oh what could be the simple answer and are others having this situation with just trying to get audio out of a TV to their new Creative equipment>?Sid?

  • [nForce] K7N2 board and Soundblaster PCI 128 soundcard

    I am running w2k with all uptodate service packs. I have an MSI K7N2 motherboard with uptodate drivers (downloaded today!) and having problems with a Creative PCI 128 soundcard. The gameport controller will not work as in Device Manager it says it can't find enough resources. I have swapped PCI slots, removed all other PCI devices and tried to change the resource configuration in Device Manger but was unsuccessful. I can't see any other devices conflicting with the soundcard and nothing shows in System Information as using the same resource as the soundcard. Anyone any ideas?
    Thanks
    Tony

    Sorry for not giving good news, but your'e wellcome !

  • Creative cloud photoshop CC and lightroom don't react I have no access any more  WHY   I have paid my monthly subscription can you to that.

           I have no access to  creroonative cloud  photoshop CC and lightroom      WHY   I paid my monthly  subscribtion.  
    [personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
    [This is an open forum, not Adobe support, please do not post personal information]

    Does your Cloud subscription properly show on your account page?
    If you have more than one email, are you sure you are using the correct Adobe ID?
    https://www.adobe.com/account.html for subscriptions on your Adobe page
    If yes
    Some general information for a Cloud subscription
    Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
    Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
    -Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
    -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
    -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
    -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
    -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
    If no
    This is an open forum, not Adobe support... you need Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

Maybe you are looking for

  • My Ipod shuffle is not recognized

    Hi, this is my first post (I mean I never had a reason to do it until today). I bought my iPod shuffle on september 29, 2005. I had months of happines with my ipod shuffle, until this week. I plugged my ipod to my computer and it didn't recognized, d

  • Error 1065 database does not exist

    while starting the concurrent manager service in windows 2003 im getting this error solution plz

  • Why can't I get a key for the Office Consumer Technical Preview now?

    So.. I tried for many times to get a key for my new office 16 technical preview but failed all the times. Now the office on my PC is running out of time. So I cannot use it now. How could I get a key to let it work?

  • Ora Golden gate: Extract Process error.

    As soon as i start the extract process i have the following error message pop up.. The procedure entry point longjmp could not be located in the dynamic link library orauts.dll. Can any1 help in dis?? Thanks in Advance.

  • Flex VS Ext JS

    Hi guys I want to figure out which way o go when architecting my new application. I know pretty much flex, but dont have experience in Ext JS, I want to build enterprise grade application which work with data, a lot of data related navigation, data m