Creative live cam voice help please

Help please,
We are using the "live cam voice" model, with our computer (Vista 32bit), that appears to work OK, but after a few minutes we get the BSOD! We have tried un installing and re-installing drivers without any effect.Has anyone had this problem and if so how did you fix it.
Regards,
Arthur

Thanks for your response. I have tried 3 ports so far, all with the same outcome. One of my sons had it happen to him on another computer (XP SP2) using this webcam . As to programmes open at the same time, I am not computer literate and have no idea what programmes were running on each occasion.We use the webcam for Skype and apart from that I may also have IE open and perhaps Outlook Express. Over and above those CS4 sometimes.
If I cannot resolve this, can any one suggest another webcam please.
Regards,
Arthur

Similar Messages

Unable to Capture - Live Cam Voice - HELP!

Suddenly I cannot capture anymore - I can still take images, but when I click to record I get the following message:Unable to capture video. Please check that you have sufficient space on your hard drive and the following are setup correctlyVideo CompressorAudio CompressorI certainly have enough hard drive space. I uninstalled and reinstalled all the software and even then updated the drivers. Nothing seems to work.
All advice much appreciated. Thanks Giuseppe

Thanks! Messed around and seems I can no longer record in MWV format but its back working in AVI format...with no compression. I can then edit after if required. Thanks for coming back to me on this one..it is a Great Help when people respond! Regards Giuseppe

Live cam voice & msn messenger

I bought creative live cam voice and I cannot get it to work with WINDOWS LIVE MESSENGER as it always crashes and gives the error message "the program has stopped working". Im using vista 64 bit and all the latest drivers.
I did get it working for a short while with MSN 7.5 but microsoft now prevent that version being used and when you try and install it windows insists on downloading live messenger instead.
Help please

HELLO CREATIVE!!!
CAN YOU MAKE THIS CAMERA USEFUL?
NEED NEW DRIVER!

Live cam voice ......errr Help please

HI all,
I wish i never uninstalled my web cam....never had it working since.
I;ll put you all in the picture....Dell, Win XP Pro, SP3, and trying to install Live cam voice.....
Unfortuantely i think i have misalid !! the main CD it came with.
I have installed the drivers ( the most up to date ones 1.02.08.0710 ) and application package on the creative web site for XP.
The application seems to freeze, the web cam works, but when it tries to install the drivers, it halts for ages on the wdmaud.drv to c:\windows\system32.....is trying to install that driver section for over an hour now, if i disconnect the usb end ( which i will do now, it says its installed ok and finished ) but not not recognise the audio section. It shows up ok and fine on the video web cam, and also as i mention above the application seems to freeze adhock.
Advice given from ireland on the phone,
1) try tips from website ....like shut down anti virus and firewall etc ...done that no use !
2) uninstall, install the files from the CD
3) uninstall.... install from the web app and drivers ( which i have already done )
4) try from another PC...i have not got another PC!!!!!
Does anybody have any other tips...please help

Yeah, I hear ya! There is such a tremendous delay between sound and video that it looks like a bad kung-fu dub :womansad: I bought 5 of them for may office and they are horribly poorly synched. What's up?

Live Cam Voice requires restart after system sleep under Vista

I have attached my Live Cam Voice to my brandnew Vaio Notebook which runs Windows Vista Home Premium and installed the latest drivers from the Creative website. The cam works fine, until I put the laptop to sleep mode and waking it up again. After waking the PC up, the cam is not recognized anymore and I need to restart the computer.
Anybody experienced similar problems and (hopefully) has a solution? Thx.

Did you ever solve this problem? I have a similar problem on my desk top running Vista Home. I couldn't get the Vista driver (download from this wesite) to load so resorted to trying the XP dri've. This seemed to work until Vista put the machine into "Sleep" mode. After coming out of Sleep mode I eith have to restart the computer or disconnect and reconnect the webcam.

I just upgraded my operating sytem to 10.6.8, to accomadate my sons new ipod which worked fine , but on plugging in my iphone 4 , itunes doesn't rcognise my phone , just says no camera found, help please.

I just upgraded my operating sytem to 10.6.8, to accomadate my sons new ipod which worked fine , but on plugging in my iphone 4 , itunes doesn't rcognise my phone , just says no camera found, help please.

Try Here > http://support.apple.com/kb/ts1591

Live Cam Voice OR wireless connection; not both

My new Live! Cam Voice blocks my wireless Internet connection. The Webcam works fine for taking photos and making little videos. But if I'm online, and plug the Webcam into a USB port, my connection is cut and I cannot restore it. Unplug the Webcam and sometimes the connection comes back, or if not I have to restart my computer, and it comes back then.
A previous Logitech Webcam worked perfectly.
Any ideas?
K

Below was copied from a post by: cjasonwilson on this forum and Worked on my live!cam voice product.
***Note***
When I followed the direction on this I found only:
LowerFilters value inthe file - I deleted that and all is well in wonder land!
Thanks to Cjasonwilson for some great info, the only thing to work after 3 calls to creative, gatway and one of my buddies dack in FL. Thanks Again!
I found a fix that worked for me and I hope it works for anyone else experiencing the same issue. I had to Manually delete the UpperFilters and LowerFilters registry values.
To Manually delete the UpperFilters and LowerFilters registry values, follow these steps:
1. Start Registry Editor (Regedit.exe).
START > RUN > (Type) REGEDIT (and hit ENTER)
2. Locate the UpperFilters and LowerFilters value under the following key in the registry
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{6BDDFC6-80F-D0-BEC7-08002BE2092F}
3. On the Edit menu, click Delete, and then click OK.
NEXT: I went to my Device Manager in Windows XP > IMAGING DEVICES > CREATIVE WEBCAM LIVE! ULTRA then right mouseclicked and chose DISABLE. I Then Right mouse clicked again and chose ENABLE. Then Wallah! My webcam led cam on and the darn thing started working again.
HOW I DISCOVERED WHAT TO DO
I came across a link to a similar problem regarding a CD-Rom Driver install issue returning Error Code 9. This was the same error code that I recieved when trying to re-install my webcam drivers. So I poked around the registry near a similar path (HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contr ol\Class\) as mentioned in the article found at http://support.microsoft.com/kb/34060/EN-US/ until I ran across an entry that said Imaging Devices in it.

Live Cam Voice on HP DV8305 -- Video image very slow

I installed Live! Cam Voice on my HP DV8305 succussfully, it works, but the video image is very slow. it needs about 30sec to capture a frame, sometime just stucked. I changed the Display Adaptive Driver, used differrent USB IF, checked my CPU and Memery usage, my HD space, use differrent IM -- skype, MSN, .... Any one can help?

As further information, the issue seems to be with the exposure setting. When I turn auto exposure off, then set exposure down as low as it will go, the picture darkens, but the frame rate goes up. I don't have this problem with my Logitech QuickCam Orbit -- I'm not sure if the problem is with the firmware, or if the CMOS sensor in the Live! Cam Voice is just smaller.

Live Drive II help please

Li've Dri've II help pleases I bought a SB Li've 5. and a Li've Dri've II several years ago.
I recently tried to add the LD II to my current system.
I am using a Audigy 2 Gamer ZS in my system.
I can not seem to get the LD II to work (I'm trying to get audio imported through the RCA jacks to rip to MP3 from vinyl).
I think my problem is that I am missing the Li'veWare disk that originally came with the LD.
I've looked everywhere on the creative site and I can not find Li'veWare to download. Nor can I find anywhere to even call a tech support number to talk to creative about getting another disk containing the Li'veWare drivers.
I am running WinXP and could use any help or suggestions, since I'd really love to convert some of my old albums to MP3 so that I can listen to them again.
Thanks,
Paul

KwanTai,
The Li've! Dri've II is not compatible with the Audigy 2. Changes in the card required that changes be made to the interface between the card and dri've.
Jeremy

HT1462 my FaceTime says that there is no connected camera? Help Please

my FaceTime says that there is no connected camera? Help Please

If restarting Mac does not resolve your trouble, try all the relevant suggestions (including testing more than one Apple camera application in more than one user account) from Apple's How to Troubleshoot iSight support article.
(Over time, Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD." Regardless of the name of your Mac's built-in camera, the same info and troubleshooting applies.)
If your Mac's System Information utility still does not recognize your inbuilt camera as a USB device, you most likely have a hardware problem. There are no user serviceable parts of the camera. For hardware help, contact Apple or an Apple-Authorized Service Provider for service. Unless you have a current backup, make one now. Then use the final "Troubleshooting" suggestion: "... contact Apple or an Apple-Authorized Service Provider for service."
Message was edited by: EZ Jim
Mac OSX 10.10.2

Live Cam Voice Camera Please help

when i try to record a video i get this message.unable to capture video.make sure the following are set correctly.video compressoraudio compressor. Any help would really be appreciated. i can not record a video or take a picture.

Is it only on Skype? Does the error occurs on other video-chat software?

Creative inspire 5300 poping help please help

HI all i have had the Creative inspire 5300 for 2 years now on the same pc nothing changed and worked perfectly until now.
now the last 4 weeks i am getting poping thud sounds from all speckers at diffrent times it looks like a interferance problem. I think
I have a surge protector which did not help so i was woundering if my 5300 are broken as thay should have a protector built into the sub for sound interferance i would of thought.
is this a comon problem with these 5300 over time ?
thay still work and sound great but the poping thud is making me mad and not only that thay do this when the pc is turned off so its the speackers that are doing it
i have a asus motherboard this one
http://uk.asus.com/products4.aspx?l=...=58&modelmenu=
also would the Creative inspire T7900 work on this motherboard as it has an onboard sound card which has High Definition Audio Enjoy high-end sound system on your PC! The onboard 8-channel HD audio (High Definition Audio, previously codenamed Azalia) CODEC enables high-quality 92KHz/24-bit audio output, jack-sensing feature, retasking functions and multi-streaming technology that simultaneously sends different audio streams to different destinations. You can now talk to your partners on the headphone while playing a multi-channel network games. All of these are done on one computer. The Dolby Digital Live technology from Dolby Lab encodes the multi-channel audio source into AC-3 bit-stream and outputs it to S/PDIF port in real time.
thanks for any help

Hi,
I have the same problem, I also have a Asus motherboard. Recently they did a massive pop sound and turned off, then all i got was a lot of feedback noise. Is this a problem with the mboard rather than the speakers?
Dan

Creative Live Cam Video IM Pro & Kubuntu

Are there linux drivers available for this web cam? Sure would be nice to be able to use it on something other than Windoze. Or am I just SOL? Thanks,
Scott

I am having the same problems. Were you able to find a resolution? Please email be at [email protected] thanks, Bruce

IPhoto 6 not recongizing my camera? Help please!

Hi, I've been using IPhoto very successfully with my Canon Rebel all along. I just hooked it up to my computer and nothing. I tried the Canon software and nothing there either. I checked in the profiler and image capture. The computer is just not seeing the camera. Don't know what to do. I restarted but that didn't help. I recently installed iPhoto Buddy but I've used it successfully one time already. It could be the cable I suppose. Anyone have any ideas? Thanks! -Julie
IMac Intel Mac OS X (10.4.5)

thanks!

Digital Life cameras. Help please.

When the camera detects motion.. Will it start recording? I was under the assumption that thats what the camera was for. I have a camera outside of my home but it does no good when im asleep and someone comes up to try to break in my car or anything else if it wont record due to detecting motion.. I can't watch it 24/7 of course. So what exactly do these cameras do? Does anyone see what I'm trying to say? Any help I would greatly appreciate! Thank you.

The camera will record video or take a snapshot when motion is detected if you tell it to do so. You simply create a program to do just that. If you need a little help creating the program, the many knowledgeable users on this forum can surely help.

Creative live cam voice help please

Similar Messages

Maybe you are looking for