Creative T7900 Why don't 7.1 work with mplayer 10?

Hi.
I have Creative T7900 speaker system and soundblaster audigy 2 ZS platinium pro and my problem is that i can't get the 7.1 surround working with mediaplayer 10,winamp,creative media source when i try to play mp3s or music CDs it just gives me sound from the 2 front speakers (left and right) even though i tried to set the program to use 7.1. But when i play DVDs in powerDVD for exampel the 7.1 sound works fine. Could it be the mp3s? or does mplayer 0 and such have support for 7.1
/Kara.

Kara,
Try turning on CMSS.
Jason

Similar Messages

  • Why don't my earphones work with my mini iPad?

    Why don't my earphones work with my mini iPad?

    All ios devices have a standard 3.5mm headphone jack.
    Make sure you have plugged them in all the way.

  • Why don't FM transmitters work with my iphone 3gs?

    I have tried 3 now, which all work on my friends iphone 3GS. All work on my old ipods too... sometimes it will come up with 'this accessory won't work with this iphone' but still works on my friends identical (tho his is 32gb, mine 16gb) - anyone have any ideas as to why this is happening?
    Also, restored my iphone the other day so the software etc is all up to date, but still no joy.
    Any help appreciated, tearing my hair out here!!
    Thanks,
    Ian.

    I have the same problem. Same with my iPad. And worst. I use my iPod touch at the gym, I used to connect the iPod on the threadmill and was able to watch videos (through the dock connector) not working any more, I only have the sound.
    I tried the composite video cable at home, just like you not working!!!
    Apple do something!!!

  • Why don't TypeKit Fonts work with Edge Inspect

    I have a Typekit kit setup with localhost added to its allowed domains and all mobile options checked. Running the site locally on http://localhost:4567/ works fine. The fonts load and display correctly.
    However, when I connect an iPhone 4, 4s or iPad 2 using Edge Connect, the fonts do not load.
    How should I troubleshoot this? I've found technical note suggesting that republishing the kit should solve it, but it does not and it is a new kit anyway.
    I have tried adding the specific port to the allowed domains for the kit - /localhost:4567, but this has no effect.

    Hi,
    Yes. You're in luck. Had a couple of very helpful people from Adobe support look into it and here is their final response in full:
    TLDR: It won't work out the box but there are good workarounds.
    When you're browsing a local website via the hostname `localhost`, which would not be accessible to any other devices on your network, Edge Inspect automatically gets your machine's local IP address (which is not the same as the external IP as shown on sites like whatismyip.com) and sends that to the mobile apps. For instance, let's say I have a Sinatra application running in Chrome on my Mac as http://localhost:4567. My iPhone wouldn't be able to understand the hostname "localhost", but it can see my Mac using its IP address 10.1.10.1, so Edge Inspect will navigate to http://10.1.10.1:4567.
    So, to get fonts working, you could add both `localhost` and `10.1.10.1` to your kit. However, we don't recommend adding local IPs to kits because they tend to change without warning. (In my example above, the next time I turn on my computer its IP could have changed to 10.1.10.2, but all I would know is that fonts had stopped working on my devices again.)
    To work around this, we recommend using some form of "dynamic DNS" — basically, a domain name that is automatically updated with your current IP and therefore will always point to your computer.
    If you're using a Mac, the simplest thing would be to use your Mac's Bonjour hostname. Bonjour is a technology built into Mac OS X and iOS to help devices find each other automatically over networks.
    To find your Bonjour hostname:
    1. Open System Preferences on your Mac.
    2. Choose the Sharing icon.
    3. Your Bonjour hostname will be displayed in the top area, under the "Computer Name" field.
    You can add the hostname that appears there to your kit, and use it on any Apple device on your network. For example, my Bonjour name is Davids-rMBP.local, so I can browse to http://Davids-rMBP.local:4567 on any Mac or iOS device and see my Sinatra app.
    Unfortunately, this simple solution will only work on Apple devices or Windows PCs with Apple's Bonjour software installed — you can't use this hostname with Android phones or tablets. If you need a hostname that will work on any device, there are a couple of options I'd recommend:
    1. A third-party service called Forward offers a way to easily forward ports from your computer to other devices anywhere on the internet. You can learn more about them and sign up for a 30-day trial here: https://forwardhq.com. Forward will give you a permanent domain name for your forwarded app that you can add to your kit, such as `dev-yourcompany.fwd.wf`.
    2. 37signals has a free "wildcard DNS" service called xip.io that will automatically forward traffic to a local IP address. You can get your current local IP address by opening System Preferences, then choosing Network. The IP address should be shown in the small text underneath the connection status for whatever connection is active (i.e. has a green dot next to it). Once you have the IP, you can access your computer at [YOUR IP].xip.io. To get fonts working, add *.xip.io to your kit. Remember that your IP may change, so if your site stops being accessible you should check to make sure you have the correct IP address.
    I personally use xip.io if I need to test Typekit on multiple devices using Edge Inspect. It's certainly not the easiest option to use, but it works quite well with almost no setup and it's free.

  • TS2771 Why don't my microphone work on my iPod 5th generation all I can hear is fuzzing

    Why don't my mic work on my iPod I can just hear fuzzing

    - Is the mic how clear and unobstructed? It is the little hole betweent he back camera and lens
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • Why don't Hold keyframes work on Audio Level?

    Hi -
    In the past (AE6.5) I recall using Hold frames to keep the Audio Level really low until the exact frame I wanted to bring it up to 0db.  Now in CS4 the Hold keyframes don't work that way.  I wind up using lots of extra keyframes and sliced up layers.  It's pretty messy.
    For example I have a narration where I have to replace one word in the center of a sentence.
    Is there a setting somewhere or, is there a new way to adjust audio levels quickly besides using key frames that someone could tell me about??
    Why don't Hold keyframes work on Audio levels anymore??
    Thanks,
    JL
    AE CS4, Intel Mac, OS10.5.8

    "adjusting your Quicktime settings to use less hardware acceleration and a different audio buffer duration"
    In AE Preferences I have "Audio Hardware" but no mention of QT.  It's currently set on "Built-in Output".
    Under "Output" I have an Audio Block Duration set at 01:00.
    In QT preferences there is nothing about hardware acceleration or buffer duration.
    Are any of these related to what you suggest?
    JL

  • Why does flash player not work with facebook?

    Why does flash player not work with fcebook?  Whenever I wish to view a video, I get the message that i need to upgrade my flash player. Then no matter how often I download and install flash player I still get the message that I need to upgrade my flash player.  When I go check which version I have, I always get the message that I have the most current one.  I run Mozilla Firefox with Windows.  I don't know anything else.
    Message was edited by: khettich

    This means you don't have the latest version installed.  Update to 11.9.900.117, and Firefox will allow it: Flash Player Plug-in (All other browsers)

  • Why does Java Application not working with Macromedia Flash 5 or MX?

    Why does Java Application not working with Macromedia Flash 5 or MX?

    Who says they don't?
    Although I don't know much about those I'd think they should be able to talk to Java Aps using Sockets or request Servlets ...
    Spieler

  • Why is Adobe Flashplayer not working with Apple? Do you have an other flash program you recommend?

    Why is Adobe Flashplayer not working with Apple? Do you have an other flash program you recommend?

    maj-brittfromsjöbo wrote:
    Thank you for your interest in Adobe Flash Player. Unfortunately Apple does not allow Flash Player to be installed on iPhone or iPad.
    May I add, this is the answer I get When I try to Download Adobe Flash Player
    You get the message because that is exactly the situation. Apple has not allowed any Flash on iOS devices.
    What site are you trying to see? Many sites now provide Flash alternatives. For example, if you want to listen to Pandora, instead of using the Flash on the Pandora website, instead you download the Pandora app for the iPad.
    In the future, even if Apple wants to add Flash to the iPad, it won't be able to because Adobe will no longer be making it at all, for any mobile device:
    http://www.wired.com/gadgetlab/2011/11/adobe-kills-mobile-flash/
    If you often go to sites that use a lot of Flash and they don't have an alternative, you should write to them and tell them to stop using Flash.

  • Why dose google toolbars not work with ver. 5

    I downloaded the new firefox 5 and it would not let me keep google toolbar

    ''why does google toolbars not work with ver. 5''
    I don't get too much involved with why, but if you really want to Google Toolbar, see
    * https://support.mozilla.com/en-US/questions/837473

  • Adobe creative cloud eea 1.5 is not working with our asus Eee box , celeron j1900 2.00 ghz, 4gb of ram, 64bit. can settings be changed in adobe?

    adobe creative cloud eea 1.5 is not working with our asus Eee box , celeron j1900 2.00 ghz, 4gb of ram, 64bit. can settings be changed in adobe?

    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Why LR4.4 no longer works with Blurb?

    Hi,
    why LR4.4 no longer works with Blurb?
    If I configure a book and then click Submit to Blurb does not happen anymore. I even looked at the network traffic and it seems as if the IP is pinged to the contact record no longer respond. I do not understand. This has worked fine all the time. On the computer no setting has been changed. No software is installed that would prevent something. The last book has worked wonderfully. Interesting things, when I export the book as PDF and then upload at Blurb, Blurb complains that the standard by which PDF is not true. X2003 PDF version .... but I am surprised very strong and I really suspect that there adobe wants to put a stop to that one is supposed to buy the new LR version. But everything just a guess. Maybe someone can help me or even has a similar problem.
    greeting
    Mario.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If not successful that means that the IOS update broke compatibility, Since the 3G and 4G iPods has difference hardware, there are some differences in the iOSs for the two model iPod.

  • Why Oracle 8i is not Working with JDK 1.3

    Why Oracle 8i is not Working with JDK 1.3 by using JDBC.

    try this
    Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
    Connection con = DriverManager.getConnection("jdbc:odbc:"somedsn","scott","tiger");
    I am using this for Oracle, it is working for me.
    Uma
    Java Developer
    http://www.globalleafs.com

  • Why does Server Monitor not work with non-Xserves?

    Does anyone know why Server Monitor does not work with non-Xserve computers? We acquired a Power Mac for a server, based on there being no apparent difference except for the obvious. Turns out there are some differences after all.
    Do Power Macs lack some hardware components or is this just a software thing?

    God question, unfortunitly I dont have the answer but I would also like to know why the software only works for X-Serve....Is there any 3rd Party Software that is similar to "Server Monitor"?
    Thanks

  • Why does my imessage not work with only 1 phone number

    Why does my imessage not work with only 1 phone number? It keeps going to imessage and then back to text message

    Both you and the recipient have to have active data connections, and both devices have to have iOS 5 or higher to be able to use iMessage. Also, they both have to have iMessage activated. If that is already the case, there is a possiblility that iMessage is down. It has gone up and down several times in the past week. Check this page for status, and if necessary you can report a problem with a link in the lower right corner. http://www.apple.com/support/icloud/systemstatus/

Maybe you are looking for