Creative zen V+ still not working after coming back from assistance for the second ti

hallo, what thje hell is happening with creative Zen V+ I got it back from assistance for the second time and it's still not working!!!!!!!!!!! I want my money back now, I'm gonna spam the whole of the internet with this unfunny joke, what the hell I'm suppoised to do I really fed up, since I bought the unit it worked for less than one month and for another one it's been back to the assistance for two times!!!! And still it's not working!!!! Now let me tell you this creative zen V + is a worthless, costly, cheap piece of crap, and I mean crap, what the hell am I supposed to do now Send it back for the third time 249 euros for this crappy piece of cheapo plastic Please is it allowed me to send it back and having in change some olther player I don't mean it to be trendy or flashy or all of the usual marketing **bleep** coming with these, I just want a player that actually play my music, a player I can load all my music without the application to freeze, the player to freeze and me having to format and reboot again and again. Is it creative capable to accomplish such task, do they still know how to build an mp3 player that actually work without me having to buy and install windows vista Or they don't Do creative have some old player still in stock zen touch wasn't stilish but worked well until the HD dyied, zen V plus isn't working as it is supposed to do, plain and simple. What do I have to do now in case you are wondering the malfunction is still the same.

For the Zen V, as it states on the box, you need Windows XP Service Pack or 2, or Windows Vista. You also need Windows Media Player 0 or . As long as you have that, you should be fine there.
You may also have a corrupted file that is causing the problem. Try not transferring them all at once, transfer it in blocks instead. If one block fails to transfer, try and narrow it down and see if it's a specific file in that block causing the problem.
When you try it on another PC, do be sure that PC meets the system requirements, especially the Service Pack if it's Windows XP. You'd be shocked how many times people try it on a 2nd computer, get angry when it doesn't work, call tech support, and find out the 2nd PC doesn't even have SP on it.
All else failing of course contact Support. They can't help you if you don't let them know what's going on, and if you don't yell at them they'll do their absolute best, trust me.
Good luck,
Dale

Similar Messages

  • Satellite P850-30W - Fan does not run after coming back from sleep mode

    I got a Toshiba Satellite P850-30W with bios 1.90.
    Sometimes the fan does not run at all after coming back from sleep mode on windows 7.
    This has happened twice (maybe more times without me knowing), and Ive had the computers for a month.
    Normally the fan starts running when the CPU gets over 50 celsius, and stops under 50 celisus...
    I tried running Prime95 when this fan-issue occured and the computer temps got dangerously high (close to 100 degree)! the fan did not start at all
    ...this error could potentinally damage the laptop...
    to get the fan running again I have to restart windows
    anyone else experienced this?
    I guess the fix would be to never use sleep-mode...or toshiba needs to fix it with a bios update.

    What kind of answer do you expect here in user community?
    Exact info about the fault? I dont think that somebody would be able to provide exact answer but just speculations
    In other Forum you can read about Satellite notebook; but is it exacts the same model?
    No, it seems to be an L650 series. Its completely different series .
    From my opinion its not software related problem.
    BIOS issue?
    Well, in case it would be a BIOS issue, the problem would appear always and not sometimes after being shut down 200 times.
    It could be a hardware related issue. Memory? Maybe
    In my personal opinion to get more details hardware diagnostic software should be used in order check the hardware for possible malfunction. Thats my personal opinion

  • Lumia 620 , Flash Not Working after Black update from "Preview For Developer"

    Downloaded the app " Preview for Developers" and checked the phone updates, It showed that one update is ready to install. Now when i update the mobile (Lumia Black Update) the flashlight of camera is not working anymore. Plz suggest

    For problems with the hardware I'd probably ask over here.
    http://discussions.nokia.com/t5/Nokia-Lumia/bd-p/Nokia_with_Windows_Phone
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • B110a black in still not working after trying all recommended solutions

    Hi there
    Black ink still not working after spending many hours trying to sort. I've cleaned the printhead carefull several times (is immaculate now) and run the system clean up and alignment functions several many times too. I've cleaned the metal connecting points. I wiggled things carefully. I've attempted printing multiple pages in b/w in case it was going to take a while to get the ink flowing again. I've replaced one (expensive) new black cartridge with another brand new (expensive) cartridge and still nothing. This machine is probably out of warranty but seriously not very old. It really ought to be working okay. We use it regularly a little bit every week. Any ideas?

    The document here has troubleshooting steps that may help resolve black not printing on your Photosmart b110a.  Be sure to check the vents as shown in solution six, step three.  If the above does not resolve the problem the post here may help.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • My iPod nano 6G stop working suddenly; After i reset it and even afetr put it in "stand by" mode by accessing deagnostic mode, it is still not working; Now i can access it sometimes (the main screen), but is not playing and is too slow. How can i fix it

    My iPod nano 6G stop working suddenly; After i reset it and even afetr put it in "stand by" mode by accessing deagnostic mode, it is still not working; Now i can access it sometimes (the main screen), but is not playing and is too slow. How can i fix it

    If you do not find a solution in the iPod nano (6th generation) - User Guide, suggest that you call AppleCare if still under warranty or take a trip to your local Apple Store or AASP.

  • Power book G4 Leopard 10.5.8. File sharing preference checked but not working after start up until unchecked and the rechecked?

    I hope the title is enough info, please ask. In the mean time I have created an applescript to open preferences/ sharing and uncheck then check the file sharing box. This works but I would obviously prefer it just work normally. I have no corrupt preference files. Perhaps a file is missing? Thank you.

    Greetings Kwnez
    I'm not up to your level of expertise yet. I'm networking and file sharing too, on my Mac Powerbook 1.33 GHz PowerPC G4; OS 10.5.8 Lepoard. At the public library I found by asking the clerk a book Authored by David Pogue. "Mac OS X Leopard the Missing Manual". It (the book) has helped me ask better questions. I'm not saying that your question "
    Power book G4 Leopard 10.5.8. File sharing preference checked but not working after start up until unchecked and the rechecked?
    is hard for me to understand, I went to system preferences and looked at the sharing box. when I clik it it opens up and the first thing I see is my computers name, and under that i see, " Computers on your local network can access your computer at: ...-powerbook-g4-15.local"
    What I'm saying is "Are we on the same Page"

  • Since downloading Yosemite Flash Player not working. Have downloaded Flash Player for Mac, but still not working. Is there a fix for this? Thanks.

    Since downloading Yosemite Flash Player not working. Have downloaded Flash Player for Mac, but still not working. Is there a fix for this? Thanks.

    1. System Preferences >  Flash Player > Advanced >  Delete  All
         Press the "Delete All" button.
         Install Adobe Flash Player.
        http://get.adobe.com/flashplayer/
       Download it first.
       The next step is important.
       Click Safari in the menubar and select “Quit Safari”.
       If it doesn’t quit, Force Quit it.
       Press command + option + esc keys together at the same time. Wait.
       When Force Quit window appears, select the application if not already.
       Press Force Quit button at the bottom of the window. Wait.
       Application will quit.
        Follow the prompts and install it.
        Restart computer. Relaunch Safari.
    2.  Allow  Plug-ins
        Safari > Preferences > Security
        Internet Plug-ins >  "Allow  plug-ins"
        Enable it.

  • Updated my iPhone to new iOS6 and my Memory Loader app does not work!  Is there a fix for the problem as it seems I am not the only one coming across this issue?

    Updated my iPhone to new iOS6 and my Memory Loader app does not work!  Is there a fix for the problem as it seems I am not the only one coming across this issue?

    Other than what you have already done, you should clear the cache from your browser and, if you use it, your Facebook app.  Also, deleting old texts can free up some room.

  • Touch pad not working of my laptop 48510s help for the same

    touch pad not working of my laptop 48510s help for the same

    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    Then See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    After you have Recovered your Device...Re-Sync your Content
    Note:
    To remove a forgotten Restrictions passcode you will need to  Restore the Device as New...
    OR... From a Backup created Before the Restrictions Code was set....

  • In app purchase is not working in testing environment in sandbox for the past 5 days. Please anyone know about this issue.

    in app purchase is not working in testing environment in sandbox for the past 5 days. Please anyone know about this issue.
    What i did
      1 . Added three products more to the existing in-app
      2 . Tested with sanbox
    i am getting the error "cannot connect to itunes store" with error code "0" when trying to purchase product in sandbox.
    Is sandbox is down?Please help guys..

    Apple's sandbox has been down practically all month. You can check the status here:
    http://sandbox.itunes.apple.com

  • Zen Touch still not working on pC

    After countless tries, and following of instructions by Uber Gurus and whatnot, My zen touch can still not work on my pc.
    Since I got my zen, it worked fine on my pc, but randomly one day it started malfunctioning.
    It started with my pc freezing on loading the library in nomad explorer and mediasource, now the library does not load at all and nomad explorer shows nothing. GODDAAMNIT this is pissing me off.
    It works on another computer but that's not what's bothering me.
    I have installed the newest drivers, uninstalled and reinstalled, I've done the same with mediasource and nomad explorer.
    --I have gone into recover mode, cleaned up, and rebooted, result: NONE!!!
    It works on another computer so what can be the problem?
    ---I've cleaned the registry of any creative tracks and what? NOTHING!!!
    There has to be something, honestly, so far all I've written in the forums is complaints and problems.

    When you restore, Touch ID will not work.
    Maybe you backup is not good? Try restore as new:
    http://support.apple.com/en-us/HT201252
    Also read here:
    Use Touch ID on iPhone and iPad - Apple Support

  • Iphone 4s camera still not working after replacing and restore?

    I bought phone with back camera not working so first i done a restore and update to no avail, then done a restore as new phone still no joy, so i decided to buy new camera which i fitted no problems but its still not working? what else can i do as there is no warranty on the phone?

    Find a third-party repair shop with experience in fixing iPhone cameras. Apple won't help you.
    Be aware, since Apple does not sell iPhone parts, there is no legitimate source for such, & many on the market are counterfeit.

  • Flash still not working after enabling it on windows 8.1?

    I followed the instructions on the help section and enabled flash, however it is still not working. I then tried to download it and the page takes me to the instructions on how to enable it.
    I have just bought a  new laptop and it is fully updated with 8.1.
    Any help would be appreciated.

    Flash Player is actually built into Internet Explorer on Windows 8 and 8.1.  There is nothing for you to download or install from Adobe.
    From the description of the problem, it sounds like you're going to a website and getting a message that Flash Player cannot be found.
    On most sites, there is JavaScript that determines what version of your browser and Flash are installed, so that it can determine what content to show you.  In Internet Explorer 11, Microsoft changed the string that identifies Internet Explorer to those scripts, and it's very likely that the website you're visiting needs to make adjustments to accommodate the change.  There will probably be a bumpy transition period as major web properties notice the problem and fix it.
    In the meantime, Mike's suggestions are good.  Use Compatibility Mode or an alternate browser.  You may also want to contact the website (particularly if they're a small shop) to let them know about the problem.  You're on the early end of the adoption curve, and they might need a head's up.
    Thanks!

  • MBP 17 2009 LCD does not turn on after coming back from sleep

    Hi,
    I feel like crying.
    I bought my 1st Mac 3-4 days ago and I have not regretted anything more than this.
    1st some mov files that Quicktime windows can play but Mac does not (feel like pulling my hair why as the videos with same settings taken with same camera before I got the mac work perfectly from flash drive.
    2nd the nVidia 9600m stopped being detected no matter what I did, next morning it magically re-appears (alongwith many things that vanished magically for e.g. options on right clicking images never came)
    3rd the MOST BUGGING AND CONSISTENT
    I close the lid, it goes to sleep. It has never come back from sleep. The screen will never turn on. Then I force shut down keeping power button pressed. And even after 2-3 restarts the screen doesn't come up. I wait for 2 min and then start. It starts working.
    ANY IDEA WHY?
    I use a usb mobile braodband modem (Huwaeii telecom's) and have a silly feeling maybe that might case something. But even that doesn't.
    My next guess is temperature. I am working in 30-40 degree celcius room temprature range. Maybe that is it.
    I think Mac is overrated and it breaks my heart saying that as I spent $2300 over it which is a HUGE amount in my part of the world. I needed it for Final Cut Pro.

    I am sorry I do not understand the response. You're saying this is a known issue? Or are you suggesting/asking "IF" it is an OEM issue?
    Because the whole problem I have is the "IF". I am not able to comprehend what is the problem.
    And Yes the machine is 6 days old. Calling technical support doesn't help.
    Apple doesn't look obsessed about customer satisfaction in India (My Luck i bought it from the only iStore in my area, hope they correct it).
    The nVidia 9600M is sometimes there sometimes not. Lately even simply starting the machine does not make the screen turn on.''
    Is there a debugging to-do list? Oh I am so "OS X"-impaired.
    Thanks,
    Rachin

  • Java script is not working while coming back to the page.

    Hi Experts,
    I am working in jdev 11.1.1.3.0 with ADF BC.
    I am callling javascript in my jsff, while this javascrip is invoking file download method. this java script i am inovking from another button action, because in some case i need to invoke popup and some case i need to invoke file download for this i have taken one button in that button i am invoking these 2 based on some condition. everything is working fine except if i move another jsff and come back to this jsff then the file download is not happening.
    can any one tell me what is the issue here.
    java script:
    function customHandler(event) {
    var exportCmd = AdfPage.PAGE.findComponentByAbsoluteId("pt1:pt_region0:1:cb1")
    var actionEvent = new AdfActionEvent(exportCmd);
    actionEvent.noResponseExpected();
    actionEvent.queue();
    java bean:
    if(downloadFile!=null){
    System.out.println("invoking downloads...............................");
    erks.addScript(context, "customHandler();");
    } if (requestClause != null){
    System.out.println("invoke popup");
    executeSactionCheckVO(requestClause);
    ADFUtils.invokePopup(this.getP2().getClientId(FacesContext.getCurrentInstance()));
    Here my bean is in backing bean scope.
    can any one help what may be the issue here. or if you can tell me how to call file download method from backing that can be great help full to me.
    Edited by: user5802014 on Aug 27, 2010 1:52 PM

    Hi:
    So it's the "erks.addScript(context, "customHandler();");" may not work properly the next time coming back from another jsff.
    And very likely the statement of: var exportCmd = AdfPage.PAGE.findComponentByAbsoluteId("pt1:pt_region0:1:cb1") in your javascript command gave you error. Are you sure that "pt1:pt_resion0:1:cb1" is valid all the time no matter how the page is rendered?
    Please mark my answer as 'Helpful' if it helps.
    Thanks,
    Alex

Maybe you are looking for

  • Billing info

    I've been having problems with my billing info lately. I received a pre paid credit card for a birthday and used it to purchase some apps. I over-drafted the credit card and now have an outstanding balance of approximately 5$. I have a lot of apple s

  • XML Transformation Problem in JDeveloper 10.1.3

    I am trying to transform an XML using an XSL, by a Java program, which uses javax.xml.transform.Transformer. I have a Java project which has the above said program, where when i run the program, the xml transformation is done successfully. But I have

  • Finder not working, responding.

    I set up another user account on my server (in system prefs, not a directory user account) and when I try to use it (or the built in guest account) the Finder is non-responsive.  I can launch Safari and other apps, but the Finder won't show windows o

  • Session varaible in region heading or title

    I have a query result in a report page - it is details for a customer - and i want that customer name in the region heading ... I have a session variable called P300_CONTACT_NAME with the name, and I want to display that in my region heading or title

  • HT4101 My iPad is tellin me I can not use the camera connector because it uses too much power..... ***

    My iPad is tellin me I can not use the camera connector because it uses too much power..... ***