CreativeCloud.exe doesn't work anymore. It seens to be not activated in the system tray.
Hello and sorry for my english. My name is Jean-Pierre BRETHES and I have a problem with the creativecloud.exe program which doesn't want anymore to start. (since a while now) The icon in the system tray doesn't appear and it still to be gray (not red). When I clic to lunch the program nothing happen. When I try to reinstall it the download end by a windows "error 50" and everything is stopped.
AT the beginning I wanted to download In design program to try the PAO functionalities. Thank to help me. My email adress is <removed email - kglad>. Have a nice day. JP
Hello and sorry for the delay. Thank you for your answer. I did what you wrote and everything is fine now. Really thank you for that. I fully understood regarding my email address in my message. I will not anymore do this error.
Have a nice day.
Sincerely, Jean-Pierre BRETHES
De : kglad
Envoyé : dimanche 6 juillet 2014 23:33
À : Jean Pierre BRETHES
Objet : CreativeCloud.exe doesn't work anymore. It seens to be not activated in the system tray.
CreativeCloud.exe doesn't work anymore. It seens to be not activated in the system tray.
created by kglad <https://forums.adobe.com/people/kglad> in Downloading, Installing, Setting Up - View the full discussion <https://forums.adobe.com/message/6527054#6527054>
Similar Messages
-
Aloha, apple-community
It seems like i have a very big problem. A few months ago, i noticed first, my iPod wont rotate properly if i tilt it to the left or right sometimes. i had to tilt it twice and than it worked. But after a week, it completly stopped working. Whenever i turned my iPod to the right or left side, nothing happened.
So i had the idea to restart it, which fixed it for a short time. After the restart was done, i was able to tilt for about 2-5 mins, later the problem appeared again
Today, nothing is working. Even in Games my iPod wont tilt or even react to any motion i do...
Well, kinda novel, i know, but i want to be as precise as possible...
so here are the things i already tried:
- Updated iTunes to 10.5.2
- Restored to a Backup
- Restored to the factory settings
- Jailbreaked my iPod to downgrade to an earlier Firmware (from 5.0.1)
- updated again to 5.0.1
- i made sure, the rotation lock is off, so please don´t give me the advice to double tab the homebutton, swipe left and tab on the lock
- started crying and thinking about throwing the iPod out of the window
by the way, my warranty is not active anymore...
so please guys, do you have a solution or even an advice for me?
Greatly appreciated,
EliasI just searched the board and it´s funny to see, what i found out:
This Error ONLY appears with : iPod Touch 3Gen 32GB 2009 Models
and here´s the proove:
https://discussions.apple.com/thread/3624353
https://discussions.apple.com/message/11701607#11701607
https://discussions.apple.com/message/15434838#15434838
https://discussions.apple.com/message/12208783#12208783
https://discussions.apple.com/message/15289257#15289257
https://discussions.apple.com/message/5638997#5638997
https://discussions.apple.com/thread/3540043
https://discussions.apple.com/message/17047827#17047827
https://discussions.apple.com/message/15242814#15242814
https://discussions.apple.com/message/15521517#15521517
https://discussions.apple.com/message/15280916#15280916
https://discussions.apple.com/message/15277669#15277669
All those guys and girls have the same problem i also do
Please guys, give me an idea what to do or even reply if there is no chance :/
Message was edited by: e1i@zzz -
Merge 2 code and script doesn't work anymore
I have 2 AS2 codes (I think). One is a carousel gallery script that lets pictures flying in a circle. And the second code is the one that let words fly, downloaden from http://www.levitated.net/daily/levTextSpace.html.
The scripts work seperatly, but once i merge the codes together the levTextSpace doesn't work anymore. And I can't find where the problem is. Fla file is included.
Carousel gallery:
picData = new XML();
picData.ignoreWhite = true;
picData.onLoad = loadXML;
picData.load("md_photos.xml");
function loadXML() {
_root.createEmptyMovieClip("thumbnails", 1);
images = new Array();
for (i=0; picData.firstChild.childNodes[i].firstChild.nodeValue != undefined; i++) {
images.push(picData.firstChild.childNodes[i].firstChild.nodeValue);
thumbnails._x = 750;
thumbnails._y = 75;
imageLoading = true;
numObjects = images.length;
objectsInScene = new Array();
focalLength = 750;
spin = 0;
_root.thumbnailSize = 350/((numObjects)/9);
displayPane = function () {
var angle = this.angle+spin;
var x = Math.cos(angle)*this.radius;
var z = Math.sin(angle)*this.radius;
var y = this.y;
var scaleRatio = focalLength/(focalLength+z);
this._x = x*scaleRatio;
this._y = y*scaleRatio;
this._xscale = -(this._yscale=100*scaleRatio);
this._xscale *= Math.sin(angle);
this.swapDepths(Math.round(-z));
angleStep = 2*Math.PI/numObjects;
for (i=0; i<numObjects; i++) {
thumbnail = thumbnails.createEmptyMovieClip("thumbnail_"+i, i);
myPic = thumbnail.createEmptyMovieClip("picHolder", 1);
myPic.loadMovie(images[i]);
thumbnail.angle = angleStep*i;
thumbnail.radius = 650;
thumbnail.x = Math.cos(thumbnail.angle)*thumbnail.radius;
thumbnail.z = Math.sin(thumbnail.angle)*thumbnail.radius;
thumbnail.y = 0;
thumbnail.display = displayPane;
thumbnail.drawBox(_root.thumbnailSize);
thumbnail.buttonize(i);
thumbnail.notLoaded = true;
objectsInScene.push(thumbnail);
panCamera = function () {
spin -= 0.001;
for (var i = 0; i<objectsInScene.length; i++) {
objectsInScene[i].display();
thumbnails.onEnterFrame = panCamera;
_root.onEnterFrame = function() {
for (i=0; i<images.length; i++) {
if ((_root.thumbnails["thumbnail_"+i].picHolder.getBytesLoaded()/_root.thumbnails["thumbnail_"+i].picHolder.getBytesTotal() == 1) && _root.thumbnails["thumbnail_"+i].notLoaded) {
if (_root.thumbnails["thumbnail_"+i].picHolder._width>=_root.thumbnails["thumbnail_"+i].picHolder._height) {
_root.thumbnails["thumbnail_"+i].picHolder._yscale = _root.thumbnails["thumbnail_"+i].picHolder._xscale=(100*(1-(_root.thumbnails["thumbnail_"+i].picHolder._width-_root.thumbnailSize)/(_root.thumbnails["thumbnail_"+i].picHolder._width)));
_root.thumbnails["thumbnail_"+i].picHolder._y = (_root.thumbnailSize-_root.thumbnails["thumbnail_"+i].picHolder._height)/2;
if (_root.thumbnails["thumbnail_"+i].picHolder._width<=_root.thumbnails["thumbnail_"+i].picHolder._height) {
_root.thumbnails["thumbnail_"+i].picHolder._yscale = _root.thumbnails["thumbnail_"+i].picHolder._xscale=(100*(1-(_root.thumbnails["thumbnail_"+i].picHolder._height-_root.thumbnailSize)/(_root.thumbnails["thumbnail_"+i].picHolder._height)));
_root.thumbnails["thumbnail_"+i].picHolder._x = (_root.thumbnailSize-_root.thumbnails["thumbnail_"+i].picHolder._width)/2;
if (_root.thumbnails["thumbnail_"+i].picHolder._width == _root.thumbnails["thumbnail_"+i].picHolder._height) {
_root.thumbnails["thumbnail_"+i].picHolder._yscale = _root.thumbnails["thumbnail_"+i].picHolder._xscale=(100*(1-(_root.thumbnails["thumbnail_"+i].picHolder._width-_root.thumbnailSize)/(_root.thumbnails["thumbnail_"+i].picHolder._width)));
_root.thumbnails["thumbnail_"+i].picHolder._x = _root.thumbnails["thumbnail_"+i].picHolder._y=0;
_root.thumbnails["thumbnail_"+i].picHolder._alpha = 80;
_root.thumbnails["thumbnail_"+i].notLoaded = false;
if ((_root.thumbnails["thumbnail_"+i].picHolder.getBytesLoaded()/_root.thumbnails["thumbnail_"+i].picHolder.getBytesTotal()<1)) {
levTextSpace:
// register root as environment
Object.environment = _root;
// create camera object
this.cam = {x:0, y:0, z:500, dx:0, dy:0, dz:-500};
// set environmental constants
this.fl = 1000;
// create 'space' to which all words will be attached
this.createEmptyMovieClip("space", 2);
// center 'space' on the stage
space._x = 800;
space._y = 900;
// a string of words related to the wind
this.keywords = "no-nonsense full-service partner co-creation innovation keep it simple technical expertise integral design method successful products teamwork designers engineers design for (dis)assembly sustainability ecological smart ideation feasability study ergonomic analysis imagineering trade off matrix prototyping consultancy technology problemsolvers open-minded multi-disciplinary imagination creative minds passionated user centered strategy added value";
// convert the string of words into an array of words
this.wordList = new Array();
this.wordList = this.keywords.split(" ");
// create one instance for each word in the list
for (n=0; n<this.wordList.length; n++) {
// pick a word from the list
var word = Object.environment.wordList[n];
var x = random(600)-(300);
var y = random(400)-(200);
var z = random(Object.environment.fl*2)-Object.environment.fl;
// create an instance of the keyWord object
nombre = "word"+String(depth++);
initialization = {txtword: word, x: x, y: y, z: z};
space.attachMovie("keyWord", nombre, depth, initialization);
trace(nombre);
this.onEnterFrame = function() {
this.cam.dz += 5;
// move the camera to its destination
this.cam.x += (this.cam.dx-this.cam.x)/10;
this.cam.y += (this.cam.dy-this.cam.y)/10;
this.cam.z += (this.cam.dz-this.cam.z)/30;change the highlighted text
picData = new XML();
picData.ignoreWhite = true;
picData.onLoad = loadXML;
picData.load("md_photos.xml");
function loadXML() {
_root.createEmptyMovieClip("thumbnails", 1);
images = new Array();
for (i=0; picData.firstChild.childNodes[i].firstChild.nodeValue != undefined; i++) {
images.push(picData .firstChild.childNodes[i].firstChild.nodeValue);
thumbnails._x = 750;
thumbnails._y = 75;
imageLoading = true;
numObjects = images.length;
objectsInScene = new Array();
focalLength = 750;
spin = 0;
_root.thumbnailSize = 350/((numObjects)/9);
displayPane = function () {
var angle = this.angle+spin;
var x = Math.cos(angle)*this.radius;
var z = Math.sin(angle)*this.radius;
var y = this.y;
var scaleRatio = focalLength/(focalLength+z);
this._x = x*scaleRatio;
this._y = y*scaleRatio;
this._xscale = -(this._yscale=100*scaleRatio);
this._xscale *= Math.sin(angle);
this.swapDepths(Mat h.round(-z));
angleStep = 2*Math.PI/numObjects;
for (i=0; i<numObjects; i++) {
thumbnail = thumbnails.createEmptyMovieClip("thumbnail_"+i, i);
myPic = thumbnail.createEmptyMovieClip("picHolder", 1);
myPic.loadMovie(ima ges[i]);
thumbnail.angle = angleStep*i;
thumbnail.radius = 650;
thumbnail.x = Math.cos(thumbnail.angle)*thumbnail.radius;
thumbnail.z = Math.sin(thumbnail.angle)*thumbnail.radius;
thumbnail.y = 0;
thumbnail.display = displayPane;
thumbnail.drawBox(_ root.thumbnailSize);
thumbnail.buttonize (i);
thumbnail.notLoaded = true;
objectsInScene.push (thumbnail);
panCamera = function () {
spin -= 0.001;
for (var i = 0; i<objectsInScene.length; i++) {
& nbsp; objectsInScene[i].display();
thumbnails.onEnterFrame = panCamera;
_root.onEnterFrame = function() {
for (i=0; i<images.length; i++) {
& nbsp; if ((_root.thumbnails["thumbnail_"+i].picHolder.getBytesLoaded()/_root.thumbnails["thumbnail_"+i].picHolder.getBytesTotal() == 1) && _root.thumbnails["thumbnail_"+i].notLoaded) {
& nbsp; if (_root.thumbnails["thumbnail_"+i].picHolder._width>=_root.thumbnails["thumbnail_"+i].picHolder._height) {
& nbsp; _root.thu mbnails["thumbnail_"+i].picHolder._yscale = _root.thumbnails["thumbnail_"+i].picHolder._xscale=(100*(1-(_root.thumbnails["thumbnail_"+i].picHolder._width-_root.thumbnailSize)/(_root.thumbnails["thumbnail_"+i].picHolder._width)));
& nbsp; _root.thu mbnails["thumbnail_"+i].picHolder._y = (_root.thumbnailSize-_root.thumbnails["thumbnail_"+i].picHolder._height)/2;
& nbsp; }
& nbsp; if (_root.thumbnails["thumbnail_"+i].picHolder._width<=_root.thumbnails["thumbnail_"+i].picHolder._height) {
& nbsp; _root.thu mbnails["thumbnail_"+i].picHolder._yscale = _root.thumbnails["thumbnail_"+i].picHolder._xscale=(100*(1-(_root.thumbnails["thumbnail_"+i].picHolder._height-_root.thumbnailSize)/(_root.thumbnails["thumbnail_"+i].picHolder._height)));
& nbsp; _root.thu mbnails["thumbnail_"+i].picHolder._x = (_root.thumbnailSize-_root.thumbnails["thumbnail_"+i].picHolder._width)/2;
& nbsp; }
& nbsp; if (_root.thumbnails["thumbnail_"+i].picHolder._width == _root.thumbnails["thumbnail_"+i].picHolder._height) {
& nbsp; _root.thu mbnails["thumbnail_"+i].picHolder._yscale = _root.thumbnails["thumbnail_"+i].picHolder._xscale=(100*(1-(_root.thumbnails["thumbnail_"+i].picHolder._width-_root.thumbnailSize)/(_root.thumbnails["thumbnail_"+i].picHolder._width)));
& nbsp; _root.thu mbnails["thumbnail_"+i].picHolder._x = _root.thumbnails["thumbnail_"+i].picHolder._y=0;
& nbsp; }
& nbsp; _root.thumbnails["thumbnail_"+i].picHolder._alpha = 80;
& nbsp; _root.thumbnails["thumbnail_"+i].notLoaded = false;
& nbsp; }
& nbsp; if ((_root.thumbnails["thumbnail_"+i].picHolder.getBytesLoaded()/_root.thumbnails["thumbnail_"+i].picHolder.getBytesTotal()<1)) {
& nbsp; }
levTextSpace:
// register root as environment
Object.environment = _root;
// create camera object
this.cam = {x:0, y:0, z:500, dx:0, dy:0, dz:-500};
// set environmental constants
this.fl = 1000;
// create 'space' to which all words will be attached
this.createEmptyMovieClip("space", 2);
// center 'space' on the stage
space._x = 800;
space._y = 900;
// a string of words related to the wind
this.keywords = "no-nonsense full-service partner co-creation innovation keep it simple technical expertise integral design method successful products teamwork designers engineers design for (dis)assembly sustainability ecological smart ideation feasability study ergonomic analysis imagineering trade off matrix prototyping consultancy technology problemsolvers open-minded multi-disciplinary imagination creative minds passionated user centered strategy added value";
// convert the string of words into an array of words
this.wordList = new Array();
this.wordList = this.keywords.split(" ");
// create one instance for each word in the list
for (n=0; n<this.wordList.length; n++) {
// pick a word from the list
var word = Object.environment.wordList[n];
// changing the next 3 lines probably will change where the words appear
var x = random(600)-(300);
var y = random(400)-(200);
var z = random(Object.environment.fl*2)-Object.environment.fl;
// create an instance of the keyWord object
nombre = "word"+String(depth++);
initialization = {txtword: word, x: x, y: y, z: z};
space.attachMovie("keyWord", nombre, depth, initialization);
trace(nombre);
this.createEmptyMovieClip("loopMC",this.getNextHighestDepth);
loopMC.onEnterFrame = function() {
this.cam.dz += 5;
// move the camera to its destination
this.cam.x += (this.cam.dx-this.cam.x)/10;
this.cam.y += (this.cam.dy-this.cam.y)/10;
this.cam.z += (this.cam.dz-this.cam.z)/30; -
After the update the home sharing doesn't work anymore
Last night I had an update from my Apple TV. After I updated it, the home sharing doesn't work anymore on any device. Not on my iPhone, iTunes, iPad, nothing. I double checked every setting and this isn't the problem. I have the newest version of iTunes. Please help!
Hello Roossx2,
Thanks for using Apple Support Communities.
For more information, take a look at:
Troubleshooting Home Sharing
http://support.apple.com/kb/TS2972
Have a nice day,
Mario -
Hi,
I've had this problem for maybe a month or so.
It's not that I can't buy books off of the itunes store, however, whenever I try to search for a book by language it doesn't work anymore. It simply says ''cannot connect to the store''. I tried doing it on both my phone and ipad, but got the same answer. How can I fix this problem?I'm not sure if I'm understanding but if I am then I'm not sure why you are turning your Wi-Fi off and on. It should automatically connect and use your Wi-Fi when it is available and use your cellular data connection when Wi-Fi is not available. I haven't turned either off ever. However, more to the point of your current problem, the following has some troubleshooting steps that may help: http://support.apple.com/kb/TS1398
-
Merging project (sync 2 library's) doesn't work anymore.
Hello,
I have a Mbp and an Imac
Whenever I want to export a project as a new library (on the mbp) and then import this in my Imac's aperture library,the merging doesn't work anymore!
I have just updated aperture to the latest version.
Before updating this worked excellent! And my library on the iMac is almost the same as on my mbp.
Now, whenever I transport a project from one library to the other, it does not merge (however I can choose that?!) When I do, my mac is running, and after finnishing I don't see anything new projects (or photo's) I've imported. When I choose "ad" then all is ok. But the new project is placed in a new folder (duplicated!) so after importing I have 2 folders 2012 ? That way I have to move the project to the 2012 folder and removing the 2012(1) folder.
Now, when I make changes and want updating in my other library,it does sync at all, and I must "add" the project again to see the difference? That way I all have duplicates.
I've tried repairing permissions,repair database and rebuilding the databases. Nothing helped
When I import the exported project in a new library I created, then all is ok.
My library is build as follow:
I import files in a new project (most managed files, previous years as refferenced on my HD)
This project I placed in folders (year) (most managed files, previous years as refferenced on my HD)
MBP early 2011. 750GB OSX 10.8.2 Aperture latest version (3.4.2)
Imac OSX 10.8.2, Aperture 3.4.2
I have a backup on my time machine, both mbp and iMac
Please advice
Excuse me for my translation, because English isn't my home language. I hope it is readable enough..;-))Everything works well now!
I have both librarys on each mac rebuild trough merge the library in an compleet new one.
(The library on my mbp was 70GB and now half of it!!! And all pictures are still present!! ) There must be something wrong with the original library!! Lots of duplicated items wich I don't seem to find!
Now I have tested, and everything works well, I can ad new projects from one mac to the other, and after editing and merging, the main library on my mac is updating every chance I made in the mbp!
It was a very long time lasting job...ppffft!
Thank you for your reply's Ernie!
I now have time to take pictures again...;-) haha
Cheers Anne -
BAD TV effect doesn't work anymore.
Hi friends.
My BAD TV effect in Final Cut Pro X (release nr. 10.1.3) on my iMac (iOS 10.9.5 Intel Core 2 Duo 3.33 GHz, 6 GB ram ddr3, 1 TB hd) doesn't work anymore.
Clicking a clip and then moving the mouse over the effect does't make it previewing the effect; applying the effect results in a black clip in the Viewer.
It's the only effect not working.
Anyone knows how to solve this problem?
Thanks in advance.Project is 1280 x 720 at 50 fps.
Media Spec are 1280 x 720 at 59,94 fps (Gopro) and 1920 x 1080 25 fps with a photographic camera (don't know name and model, it's of a friend of mine).
I tried the effect on both media specs. And... sometimes in preview mode (media selected, scroll on effect) it works, but when applied the clip goes completely black. If I uncheck the effect, clip works ok.
It's like FPCX could not render the clip... -
All of a sudden, report doesn´t work anymore
Getting really tired of this whole SCOM-thing the last days.
Now the reporting doesn´t work anymore. We changed NOTHING.
State went from Zero to Healthy 4:14 PM on friday last week. Alright.
But a few hours later, when nobody was here anymore, it changed to EROR.
How can that happen?
Reports are EMPTY suddenly. You can't start report-tasks anymore. They disappeared.
We checked:
- Discovered Inventory -> Data Warehouse Synchronization Server
- State is Critical.
- Display name is wild numbers+characters, is this normal?
- Health explorer says:
'DeploymentException': Failed to deploy reports for management pack with version
dependent id '471cffe4-2085-cf71-2513-ecbac52be31f'. Failed to deploy report
'Microsoft.Windows.Server.Reports.PerformanceBySystem'. AdjustDataSources:
Exception <ErrorCode
xmlns="http://www.microsoft.com/sql/reportingservices">rsItemNotFound</ErrorCode><HttpStatus
xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message
xmlns="http://www.microsoft.com/sql/reportingservices">The item '/Data
Warehouse Main' cannot be found.</Message><HelpLink
xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsItemNotFound&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.2100.60</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server
Reporting Services</ProductName><ProductVersion
xmlns="http://www.microsoft.com/sql/reportingservices">11.0.2100.60</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem
xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message
msrs:ErrorCode="rsItemNotFound"
msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsItemNotFound&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.2100.60"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">The item '/Data
Warehouse Main' cannot be
found.</Message></MoreInformation><Warnings
xmlns="http://www.microsoft.com/sql/reportingservices" />Hi,
Generally these errors are caused by improper SQL SRS configuration, to confirm SRS is initialized correctly, are you able to navigate to http://localhost/reports or http://localhost/reportserver?
Are you upgraded to SP1 RC yet and have you the latest versions of the MP' as a lot of these reporting issues have been resolved?
Also re-check all your SRS accounts have the relevant permissions and all permissions in IIS are correct?
You could try resetting the SRS configuration and re-install Reporting.
1. COPY the ResetSRS.exe file in SupportTools folder of the OM 2007 media to
C:.
2. Open a Command Prompt and change your path to C:.
3. Type "ResetSRS.exe MSSQLSERVER" where MSSQLSERVER is your SQL instance
name.
4. Then open Reporting Services Configuration Console, select Web Service
Identity and click Apply.
5. Finally, reinstall your reporting service by running OMSetup.exe again.
In addition, please provice the event ID under event vierwers, so that we could analyze it further.
http://social.technet.microsoft.com/Forums/systemcenter/en-US/0a66dfa4-a39c-44c4-93cf-ca064d6bc52c/scom-reporting-error-rsitemnotfound-?forum=operationsmanagerreporting
Hope this helps.
Regards,
Yan Li
Regards, Yan Li -
"Photoshops doesn't work anymore"
When I try to start Photoshop on my laptop, it shows me a message: "Photoshop doesn't work anymore"
I have windows 8 and 32 Bit
I have seen some posts where people had the same problem and solutions, but this solutions don't help me very much.
Please Help.reset your preferences, Photoshop Help | Preferences
if that fails to solve the problem, uninstall, clean and reinstall per Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 -
Since installation of Mountain Lion (10.8.2) the latest version of Sony Image Data Converter (Ver. 4.6) doesn't work anymore. How can I solve this problem?
HI,
I have seen this with AIM Logins that use the SSL Server and not the original server that was non SSL
Since iChat 6 the server name has also changed as has the Login port (Although we were suggesting using the port 443).
The AIM SSL server "Falls Over" more frequently than the other server.
Also iChat/Messages reconnects automatically to the NON SSL server but not to the SSL one (It is a security risk)
You had to manually Log out by Untick "Enable this Account" then Log back in again.
I have not seen this happen in Jabber accounts but I don't use my computer the same way you do.
Jabber Servers tend to either use SSL or Not and can rarely login if you change to not using SLL.
It also seems a bit strange that Disabling the account, as you phrase it, and re-enabling does not work.
For Googletalk Logins try logging out then changing the port to 443 (Googletalk allows this port as well as 5223)
Also check the Keychain (Applications/Utilities > Keychain Access) and see if there is an issue with any Gmail or Googletalk certificate.
10:35 PM Wednesday; November 14, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Last week, I had no problems streaming my MacBook Pro to my sony Bravia with a logix hdmi cable. I came back from holidays and now it doesn't work anymore. What settings should my computer be on and what settings should my tv be on?
TarahCurrie Sep 10, 2014 3:48 PM
Restore From Time Machine Backup
Reinstall OS X
Get Help Online
Disk Utility
MacBook Pro, Mac OS X (10.5.8)
You are running 10.5.8
Did you try booting off your Install disk holding the c key down. From here you can get to the drop down menu just a few clicks in (you are not going to install) and run the Disk Utility>Repair Disk. See if it will let you do this. -
Efi Express doesn't work anymore so I can't print
I Use Efi Express as RIP and colormanagement software to print to my Epson Pro 4900 printer. Now I need prints and this doesn't work anymore.
I installed Maverick so that is most likely to be the problem, because just before I did this the pritner and software worked fine. I installed Efi Express again but I keep getting a message aboutr a system extension that isn't properly installed.
I looked in the system folder for this .kext file, but it doesn't exist at all.
Please help.We use the Fiery Express driver with our Canon copiers that use the optional EFI print controller and have no issue with this driver on 10.9. In fact, at this point in time, it is the only EFI driver we have for 10.9.
The Express driver plugins should be located in /Library/Printers/efi and the PPD will be in /Library/Printers/PPDs/Contents/Resources/en.lproj and is called Fiery Express. So trash these files and check the EFI web site for the latest version of the driver. -
I can't seem to get my iMac (late 2009 model) into automatic sleep mode. If I manually put it into sleep I don't have any issues.
I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion. I now want to fix the underlying problem.
I'm not running any weird background processes and in my energy saver settings I've tagged "put the hard disk to sleep when possible:, "allow power button to put computer to sleep" and "automatically reduce brigthness". All pretty standard.
Is there anyone who can give me some pointers ?Today I solved the same problem for my iMac running Snow Leopard. See https://discussions.apple.com/thread/3008791#15947706. The method may help you, too.
For me it was the DynDNS Updater preventing my iMac from automatically entering sleep mode.
To my knowledge the cause of this sleep problem can only be a peripheral device or a process. So I suggest to first unplug all peripherals and test whether that's the cause. If not, I suggest to terminate one process after another and to test automatic entering of sleep mode after each. Start with user processes; continue with system process if necessary.
At least that's the way I found the offending process. Fortunately, I was able to change the configuration of that process to allow again automatic entering of sleep mode.
Good luck! -
Su doesn't work anymore but sudo works
Hi all,
I normally use my standard user account but when I'm installing with macports I routinely "su" into root to do things.
Today I went on my machine and noticed that "su" wouldn't work. Before anyone decides to tell me that I don't need to use "su", I realize that but I use it for my own purposes.
From the system log I am seeing this each time "su" fails:
su[1376]: pam_authenticate: Permission denied
What is interesting is that doing a "sudo su" works, and I'm able to do all of my admin duties that way.
I have a feeling something messed up my bash profile but not totally sure. Has anyone else run into this issue?Hi all,
Thanks for the help on this issue.
I'll clarify: I'm using this install as a server and this is why I have 2 admin accounts on it. The original account is my own; the one I created when I first installed OS X. I then enabled System Admin (root) so that is the other admin account. After installing MacPorts I have been running the system as a multi-user webserver. I occasionally log in as root to do maintenance and upgrades. I have found that it's easier to use the SysAdmin account in certain situations because of permissions issues and ease of installing upgrades.
I'll often log in under my username and then su to root. Recently (yesterday) I noticed that "su" didn't work anymore when I used my normal username.
There are sometimes that I will log onto the machine as System Admin and usually via the terminal (console) I can log in as any of the other accounts by doing
su <username>
this also doesn't work anymore. I get the error:
shell-init: error retrieving current directory: getcwd: cannot access parent directories: Permission denied
I have two servers set up this way. One works the way it should, the other one has this problem. The only difference I can see is in roots bash profile but I'm not sure why they are different on each machine.
Also when logged in as System Admin, I should be able to turn off "allow user to administer computer" on my regular account but it's grayed out. On the other similarly configured machine, under the same conditions, I can. I'm not sure why I can do it on one and not the other.
I've tried turning off enable root via Directory Utility but that didn't fix the issue. -
Time Machine Just Doesn't Work Anymore
I was a happy Time Machine (with Time Capsule) user for months. But it just doesn't work anymore. It takes longer than an hour to do every hourly backup so it is backing up 24 hours a day. It finds hundreds of thousands of files changed every hour and tries to back them up. Finders says only tens of files have been modified all of today. I have tried rebuilding my spotlight indexes, repairing my Time Capsule with Disk Utility and starting over with a brand new backup. But it just backs up hundreds of thousands of files every hour. So I am turning off Time capsule since it is clearly broken. If anyone has any suggestions at all I would welcome them.
Marcia,
Consider the following, it might give you some ideas:
Time Machine performs backups at the file level. If a single bit in a large file is changed, the WHOLE file is backed up again. This is a problem for programs that save data to monolithic virtual disk files that are modified frequently. These include Parallels, VMware Fusion, Aperture vaults, or the databases that Entourage and Thunderbird create. These should be excluded from backup using the Time Machine Preference Exclusion list. You will, however, need to backup these files manually to another external disk.
One poster observed regarding Photoshop: “If you find yourself working with large files, you may discover that TM is suddenly backing up your scratch disk's temp files. This is useless, find out how to exclude these (I'm not actually sure here). Alternatively, turn off TM whilst you work in Photoshop.” (http://discussions.apple.com/thread.jspa?threadID=1209412)
If you do a lot of movie editing, unless these files are excluded, expect Time Machine to treat revised versions of a single movie as entirely new files.
If you frequently download software or video files that you only expect to keep for a short time, consider excluding the folder these are stored in from Time Machine backups.
If you have recently created a new disk image or burned a DVD, Time Machine will target these files for backup unless they are deleted or excluded from backup.
Installing new software, upgrading existing software, or updating Mac OS X system software can created major changes in the structure of your directories. Time Machine will backup every file that has changed since the installation.
Files or folders that are simply moved or renamed are counted as NEW files or folders. If you rename any file or folder, Time Machine will back up the ENTIRE file or folder again no matter how big or small it is.
George Schreyer describes this behavior: “If you should want to do some massive rearrangement of your disk, Time Machine will interpret the rearranged files as new files and back them up again in their new locations. Just renaming a folder will cause this to happen. This is OK if you've got lots of room on your backup disk. Eventually, Time Machine will thin those backups and the space consumed will be recovered. However, if you really want recover the space in the backup volume immediately, you can. To do this, bring a Finder window to the front and then click the Time Machine icon on the dock. This will activate the Time Machine user interface. Navigate back in time to where the old stuff exists and select it. Then pull down the "action" menu (the gear thing) and select "delete all backups" and the older stuff vanishes.” (http://www.girr.org/mac_stuff/backups.html)
*TechTool Pro Directory Protection*
This disk utility feature creates backup copies of your system directories. Obviously these directories are changing all the time. So, depending on how it is configured, these backup files will be changing as well which is interpreted by Time Machine as new data to backup. Excluding the folder these backups are stored in will eliminate this effect.
*Backups WAY Too Large*
If an initial full backup or subsequent incremental backup is tens or hundreds of Gigs larger than expected, check to see that all unwanted external hard disks are still excluded from Time Machine backups.
This includes the Time Machine backup drive ITSELF. Normally, Time Machine is set to exclude itself by default. But on rare occasions it can forget. When your backup begins, Time Machine mounts the backup on your desktop. (For Time Capsule users it appears as a white drive icon labeled something like “Backup of (your computer)”.) If, while it is mounted, it does not show up in the Time Machine Prefs “Do not back up” list, then Time Machine will attempt to back ITSELF up. If it is not listed while the drive is mounted, then you need to add it to the list.
*FileVault / Boot Camp / iDisk Syncing*
Note: Leopard has changed the way it deals with FileVault disk images, so it is not necessary to exclude your Home folder if you have FileVault activated. Additionally, Time Machine ignores Boot Camp partitions as the manner in which they are formatted is incompatible. Finally, if you have your iDisk Synced to your desktop, it is not necessary to exclude the disk image file it creates as that has been changed to a sparsebundle as well in Leopard.
Let us know if any of this helps.
Cheers!
Maybe you are looking for
-
Pogo board games. What they are using?
Hi, I been to Pogo.com and tested board games. All are made with JAVA.There games are 2D. 1 - Can some one tell me what mix of techonologies they are using. Board, Poker games? . 2 - Can we made these games with Java 2D library? 3 - What multiplayer
-
How can I get them back if they are on my iCloud, and why doe this happen?
-
Customer Interface - hz_cust_accounts.account_name
I am working on customer interface of R12. I want to populate the account description in the interface table. What is the table used for this. The base table used to capture account description is hz_cust_accounts and the column is account_name. Coul
-
New form of Hacking done to me.
Im having an AI apparently use my account for msging. the I am in Jadiction stuff and everything below that is the "AI".
-
Hi, What is the default layout set for xml forms and how can i change the layout set for xml forms Thanks and Regards Puneet