Creator in custom field entry point display method - Process Manager

Hi All,
I'm trying to create a custom field in Process Manager that grabs the creator user id and the current calendar year and displays a table of vacation taken for the year in an entry point. The problem is that I cannot figure out how to grab the creator's uid without using an iProcessInstance object which is not created until the form is submitted.
Does anyone know how I can do it?
Thanks in Advance for your help
-Dug

Hi Ghanesh and SRM experts,
I went through your link mentioned below and I have the EXACT same issue. I am using SRM 5.5 and I have added a custom field to the quotation item level. I am unable to make this field editable no matter what I do .
1)  I have gone through all notes mentioned in your scrap and I have implemented them all .
2) I have added the custom field to INCL_EEW_PD_ITEM_CSF_QUOT and INCL_EEW_PD_ITEM_CSF.
3) I have also implemented BADI BBP_CUF_BADI_2 and I confirm that the method MODIFY_MODE_QUOT is never getting called. MODIFY_SCREEN is getting called , and the value of the flag ET_FIELDS-XINPUT is always 'X'. Still the quotation field is display only.
Your post is dated a few months back. If you have solved this problem could you please let me know how.
Help from anyone who anything about the above will be appreciated.
Thank You .
Regards,
Ajali Sen

Similar Messages

  • New Entry Point in Cisco Interaction Manager

    I have created a new Entry Point in Cisco Interaction Manager for web chat. I used a new Queue and a new Script for the que script selector. I added a new ICM queue script for the chat, a new Dialed Number / Script Selector. When I test the new chat, the entry point works and shows the new entry point name in the CIM agent, but it still queues to the existing queue in ICM, not the new one. Anyone have any idea what I might have missed?
    Thanks - Keith                  

    Hey Lara, the emails are not getting queued because they are abnormally handled after success path of Queue to skill group.
    please add a wait node, after success path of queue to skill group. set time in wait node to max time you want emails to stay in queue. may be after this you can use another queue or send some label back to CIM, which matches to non IPTA group on CIM.
    the same is applicable for Chat as well.
    coming to the point at the subsequent chat not routing to the same agent, this one depends on max concurrent task you configure in CIM for Chat queue.
    there is config tab in each ICM integrated queue called "Concurrent task limit", this is the one deciding factor on how many concurrent task for each queue an agent can handle.
    please try and let me know if that works.
    regards
    Chintan

  • 2 Custom Fields-create and display

    In addition to the standard fields available within the Whou2019s Who service, we need to create and display 2 custom fields within the employee search functionality in ESS. 
    Can someone walk me through the steps please?

    Hello,
    There are 2 sections of search available.
    1 is normal search and 1 is advances search.
    Well for advanced search you can very much follow my earlier reply.
    And you can also have a look at below thread...
    ESS Who is Who - Add search criteria
    I guess you want to add extra field in normal search.
    I am not sure how to do it....as Siddharth (In link I pasted above) says that he himself have never seen any changes in normal search.......
    But still you can give below method a try.....
    http://wiki.sdn.sap.com/wiki/display/profile/ESS%2bPersonal%2bInformation%2bUI%2benhancement%2bwithout%2bmodification?bc=true

  • Custom field not getting displayed in SUS PO item level

    HI all,
    We are using SRM 5.0, ECC6.0 and ECS scenario.
    As per SAP note 762984, we have enhanced the structures such as :
    INCL_EEW_PD_ITEM_CSF_SUSPO
    INCL_EEW_PD_ITEM_CSF
    and have added a record in the following place in SPRO:
    Supplier Relationship management-> Supplier self service->Make field control settings for tables.
                  | Item   | Display | Z.PO.ITM.VIEW
                  | Item   | Change  | Z.PO.ITM.EDIT
    But we are unable to display the field in the SUS screen.
    We had also referred to the following blog :
    /people/yeusheng.teo/blog/2008/01/05/ordering-unit-vs-order-pricing-unit-in-srm-sus
    but had no success.
    Please let us know if we did something wrong or are we missing something.
    Also please let us know if BSP changes are really necessary to do this as neither in the SAP note nor in the above mentioned blog, there is any mention about this.
    Regards
    Kishan

    Hi Bharadwaj,
    Thank you for your inputs. I executed the program but it didn't display the field.
    But I was able to rectify it by re-creating the steps mentioned in the blog (see original post). I had missed giving correct positions to the custom field.
    Regards
    Kishan

  • Custom Fields not being displayed.

    Hi Experts,
    I have recently done a EEWB enhancement and also CRMV_SSC configuration to enable display of a custom field for my support notifications.
    However these custom fields are not appearing. This looks like an issue with the configuration in CRMV_SSC, however I am not sure of how find the Screen Panel and Profile to confirm the changes in this.
    Would like to know if any of you have faced similar issue or if you have any idea about the configuration of EEWB changes in CRMV_SSC.
    Thanks,
    Aditya

    Hi Stephane,
    Thanks for the blog, however I had already gone through that.
    I figured out the problem - our configuration was a little different. Instead of using the screen profile - SRV_SLFN_1, we were using the screen profile - SRV_SLFN_2.
    I found this by checking CRMV_SSC, Scrn Profile select. option - here the associated screen profile and transaction type were given.
    Thanks for the help.
    Regards,
    Aditya

  • Customer fields do not display in Define Field Groups for Cust. Fields IMG

    I am customizing to display cusotmer fields in cporjects IMG actviity 'Define Field Groups for Customer Fields'.
    I am able to see the main tab in object category and multiple sub tabs in it. However customer fields that have been added by Enhance database tables in DPO are not shown or visible in the sub tabs.
    Am I missing any config? Please let me know.
    Senthil

    Hi Senthil,
    If you can see the tabs and not the fields, pl check if you have covered field control for these newly created custom fields.
    To have field control for these fields, you will have to copy the standard SAP provided field control, include the structure that has you custom fields and give it authorizations etc as per your requirement.
    Pl read carefully the documentation provided with field control.
    Refer note 947963 - Setting up field control
    Regards,
    Reema.

  • Customer fields do not display in cProj 4.5

    Hello,
    I am trying to customize customer fields with the 'Define Field Groups for Customer Fields' IMG activity
    I am using following steps to do this:
    1. Enhance database tables for customer fields
    2. Create field groups for customer fields
    3. Assign customer fields for fields groups
    4. Define fields groups per project type
    5. Save and open cProjects
    But when I start the application only the main tab and sub tabs can be seen. Other customer fields are not seen.
    Does someone has an idea what is going wrong with it and where I can start searching the problem?
    Thx, Vanessa

    Hello Vanessa,
    there is one more step that needs to be done in the customizing:
    You have to set up a field control for your customer fields (IMG activity 'Set Up Field Control'). Here you define the conditions when these fields are displayed, hidden etc...
    If you have no field control, these fields will be always hidden.
    Please do not change the standard field control 0SAP but rather copy it to your own and adapt it according to your needs. Please refer also to the available IMG documentation.
    Afterwards, this field control needs to be assigned to your project type (IMG 'Define Project Types').
    Regards,
    Silvia

  • SRM Custom field "Unloading Point" mapped to PR and PO in Classic Scenario

    Hi Gurus,
    SRM 5.0 and ECC 6, Classic
    We have a requirement of adding a new custom field u201CUnloading Pointu201D in Basic Data in SC.
    The u201CUnloading point u201C field in SRM is to be mapped to  the existing standard field u201CUnloading Pointu201D in the u201CAccount Assignmentu201D tab at the Item level .The same field  should be updated for PR and PO also.
    Followed the below link
    http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20b36c12-685f-2c10-4fb4-ba2e0b969c27?quicklink=index&overridelayout=true
    By   Andreas Milbredt   and  for PR is it updating fine.
    For PO it is not getting updated.
    BBP_CREATE_BE_PO_NEW--->.FILL_PO_INTERFACE1---->.
    u201CMETHOD IF_EX_BBP_CREATE_BE_PO_NEW~FILL_PO_INTERFACE1 u201C
    In this we are updating the below structure Unloading Pont field with SRM u201CUnloading Pointu201D data.
    cs_po1_document-IT_POACCOUNT-UNLOAD_PT
    cs_pox_document-UNLOAD_PT = 'X'.
    Still it is not getting updated.. Pls help
    Thanks in Advance.
    Babu

    Hi,
    further Info:
    After debugging  it was found that  this BADI BBP_CREATE_BE_PO_NEW  it triggering the below standard implementation .
    BBP_CREATE_ICC_BR_PO(BAdI Implementation to Transfer Brazilian Fields) only and the BADI is of type single Use.
    But we have our custom implementation added to the BADI " BBP_CREATE_BE_PO_NEW" which is not read and made inactive automatically by the system.
    Let us  know if this is a standard behavior and please help to proceed further.
    Regards,
    Suresh.

  • Custom field to be displayed in shopping cart header

    Hi,
    I have a requirement to add a custom field on the Shopping Cart header.
    We are working on SRM 7.0 version.
    Note 672960 says that the header fields cannot be displayed for the shopping cart. If
    you define fields on the header, they can only be filled in BADIs.
    Is this is true for 7.0 as well?
    Please let me know if anyone has worked on a similar requirement.
    Thanks,
    Binu

    Hi,
    No you can add the customer fields in the header level also.
    Please look at the below structure to add the custom fields.
    INCL_EEW_PD_HEADER_CSF_SC      Customer Enhancements on Shopping Cart Header
    INCL_EEW_PD_HEADER_CST_SC      Tabular Customer Enhancements on Shopping Cart Header
    INCL_EEW_PD_HEADER_SSF_SC      SAP Internal Enhancements (IBUs, and so on) on SC Header
    INCL_EEW_PD_HEADER_SST_SC      SAP Int. Tabular Enhanc. (IBUs, and so on) on SC Header
    You will find this useful.
    https://websmp105.sap-ag.de/~sapidb/011000358700001969972008E.pdf
    Thanks
    Venkatesh P

  • Add a custom-field in the table MARC and manage it in MM01/MM02/MM03

    Good day to all of you!
    I have this task: To add a custom-field to the table MARC. This custom-field will be managed through the MM01/MM02/MM03 transaction as follows:
    In the Basic Data 1 or Basic Data 2 the custom-field data will be added. Let's say the field is MATNR OBSOLETE.
    I have searched and implemented the things in customizing: Made a copy of function group MGD1, added the field on the screen.
    MY PROBLEM! How to manage it??? When the user enters MM01/MM02/MM03 and update this field, the field should be updated in MARC.
    1. I am not sure that this custom-field should be on Basic Data1 or Basic Data2.They want it at plant level.
    2. How to manage the data transfer from SAP Standard Program and my Custom Function Group.
    PLs: Do not paste me link to sap technical site with that example, because there takes the custom fields and UPDATE a CUSTOM TABLE. I need to update MARC!
    All the documentations i have read until now tell you how to add the field, ONLY the first part of the SOLUTION.
    Any help, pls?
    Good day and thank you!

    Hi Alex,
    In which way you are trying to update that custom filed. Have you written any logic in EXITS/BADIS?
    http://pavelgk.pbworks.com/f/6729224-Implement-Screen-Exit-for-MM01-Adding-New-Fields-in-Screen.pdf
    and
    Just read the OSS note mentioned earlier.
    Symptom
    You want to integrate customer-specific fields in material master maintenance.
    Other terms
    SAPLMGMM, RMDATIND, ALE, CI_MMH1, EXIT_SAPLMGMU_001 
    Solution
    To add customer-specific fields to an existing material master table (such as MARA or MARC) , you can proceed as follows as of Release 3.0C:
          1. Use an append structure to add the fields to the required table in the Dictionary (this is not a modification; for details, see the SAP document "ABAP/4 Dictionary"). In Release 3.x, the length of the field names must be the same as  the standard five character fields. This is necessary because of dynamic assignments. As of Release 4.0A, the lengths of the field names can be longer than five characters. If the changes of the fields should be recorded in the change document and taken into account during ALE distribution, set the 'Change document-relevant' indicator for the corresponding data elements. For table MARA in Release 3.x, you must also enhance the database view MARU because the database changes are carried out using this view. This small modification is no longer necessary as of Release 4.0A because the database view MARU is enhanced automatically when you enhance table MARA or the include EMARA (which is the data part of table MARA).
          2. Enhancing online maintenance in customized material master maintenance:
          Define a subscreen with your customer-specific fields in a customer-specific function group created as a copy of the standard function group MGD1.
          In Customizing, assign this subscreen to a maintenance screen using the "Copy customized material master" function. For details, see the Implementation Guide (IMG). As of Release 4.0A, program COPYMGD1 is available. You can use this program to create customer-specific function groups as required. This program is also incorporated in the Customizing function 'Configure customized material master'. Ensure that each field of the subscreen has a field statement in the flow logic, otherwise the data is not transported correctly. You can use subscreen SAPLMGD1 2002 as an example.
          If you want these fields to be subject to standard field selection, you must add new entries for them to the central field table for material master maintenance (T130F): 
          Application examples for standard field selection:
          The field is mandatory and is to be flagged with a "?".
          The field belongs exclusively to the purchasing user department. Purchasing data and MRP data are both contained on one screen. However, the MRP controller is not to see the purchasing data.
          The following data is required for each field:
                a) Field name        (T130F-FNAME)
                b) Field selection group (T130F-FGRUP)
                Here, you should use a standard field group if the customer field is subject to the same field selection as the standard fields of the standard field group. If it is not, use a customer-specific field group.
                You must then check and, if necessary, modify the attribute of the field group using the function "Maintain field selection for data screens" in Customizing under "Logistics Basic Data -> Material Master".
                Field groups 111 through 120 that are not used in the standard system are reserved as customer-specific field groups. As of Release 3.0F, additional customer field groups are available. (For details, see the IMG).
                c) Maintenance status (T130F-PSTAT)
                List of the user departments that may maintain the field. You can display possible values by using the input help for the maintenance status field in the Customizing activity "Configure Material Master" when maintaining logical screens.
                d) Reference        (T130F-KZREF)
                This indicator must be set if the field from the reference material should be proposed during creation with reference.
    Note: You cannot yet use Customizing to enhance table T130F; you can use only transaction SE16 (Data Browser) or transaction SM31. Future releases will include a separate Customizing function for maintaining customer-specific fields. See Note 306966. By implementing this note you can add entries to table T130F within Customizing. This type of maintenance is possible as of Release 4.5B.
    You may change the entries for standard fields only with regard to the reference data and field selection group. Changing other data for standard fields constitutes a modification. Therefore, you cannot use the Customizing function "Assign Fields to Field Groups" to change this data.
    In addition, you must not add new standard fields to table T130F.
          3. If you want to maintain customer-specific fields using data transfer by direct input or via ALE distribution, proceed as follows:
          Add the fields to central field table T130F (see above).
          Add the customer-specific fields to the data structures for the data transfer (for example, BMMH1 for the main data).
          Also, add the customer-specific fields to the tables in which the incorrect data is stored during direct input. These tables have the same name as the corresponding master data table and also have the suffix _TMP.
          For example: If you add customer-specific fields to table MARA, you should add the same fields to table MARA_TMP.
          If you use ALE, you must also add fields to the IDoc. To process enhanced IDocs, you can use enhancement MGV00001 with customer exit EXIT_SAPLMV01_002 for creating the IDocs and customer exit EXIT_SAPLMV02_002 for posting the IDocs.
          Prior to Release 3.0E, enhancing structure BMMH1 constitutes a modification. In this case, you must add the new fields tot the end of the structure before the last field (SENDE = record end indicator).
          As of Release 3.0F, structure BMMH1 contains the customer include CI_MMH1, which is part of the enhancement MGA0001. Here, you must proceed as follows:
                a) Add the customer-specific fields to include CI_MMH1.
                The names of the fields in CI_MMH1 must be identical to those of the corresponding fields in material master tables MARA, MARC and so on.
                Important: The fields must be CHAR type fields. Therefore, create CHAR type data elements whose lengths are identical to the output length of your fields in  table MARA and so on. Use these data elements in include CI_MMH1, but use the field names from table MARA and so on.
                b) Activate include CI_MMH1.
                c) If you have not used customer structure ZMMH1 before, create it as a copy of structure BMMH1 and delete the standard fields that you do not require. You are not permitted to delete field STYPE and include CI_MMH1 when doing this. If you have already used structure ZMMH1, add include CI_MMH1 to it.
                d) Activate structure ZMMH1. This also adds the customer-specific fields to ZMMH1.
    Run program RMDATING. This program generates routines which are supplied to your customer-specific fields from the input file. As of Release 4.5A, you also need to activate the routines/function modules generated by program RMDATING (especially, the MAT_MOVE_BMMH1_XXXX modules). Details about this subject (especially the procedure when using customer structure ZMMH1) are described in the IMG for transferring the material data under item 'Maintain Transfer Structure'. Also, check the declaration of structure WA in program RMMMBIMC to see whether it is declared with sufficient length. If necessary, enhance the declaration (for the time being, this still constitutes a minor modification).
    In addition, lengthen domain DI_DATA with CHAR 5000. As of Release 3.1H, this has already been done.
    Important: When using customer-specific fields, you can use only structure ZMMH1 to transfer the data. Otherwise, after the next SAP upgrade which contains new standard fields in structure BMMH1, the input files no longer match. If you want these new standard fields to be transferred, add them after your customer-specific fields (the order of the fields in structure ZMMH1 does not need to be the same as the order of the fields in BMMH1).
    If you want foreign key dependencies or fixed domain values to be checked, or another check for a customer field, this is possible up to and including Release 3.0D only by modifying the corresponding check function modules. As of Release 3.0E, you can use function exit EXIT_SAPLMGMU_001 (SAP enhancement MGA00001) for these purposes.
    If you want to use engineering change management to schedule future changes for your customer-specific fields or you want to use the 'Display at Key Date' function, execute program GENERATE in addition. This program generates the necessary assignments for interpreting the change documents. With regard to engineering change management, you must read Notes 60281, 60973, and 48962.
    To date, it is not possible to integrate customer-specific tables in material master maintenance without making a modification. However, you can create customer-specific development objects containing the essential additional logic. You can then integrate these development objects in your system as part of only a minor modification.
    check this link. It may helps you to solve your issue.
    Thanks
    Sravan

  • Customizing the statistic result for the process management

    Hello everyone ,
        As you know , we always need customize some statistic for the customers , some customers wonder whether they can Stat according to the all the data in the form for the process  . And these statistics such as the numbers of everyone who start process , the average work efficiency of each staff (the period who deals with his/her job)  etc. , many kinds of these requirements .
       Is there any ready methods to realize this requirements , it seems the BAM can not  be suitable for all of these requirements ; at the begining , I want to save all the data into DB , but I am afraid that this will make the system very slow if there is a large number of these data in the DB.
       Well , can anybody give some suggestion ? Thanks a lot !

    I think BAM is your best option.
    If you don't get the statistic that you need, you can always build a custom dashboard object (graph) to get it.
    Jasmin

  • Tabular Customer Fields - SC & Bid Invitation - Unable to display

    Hi,
    I am facing difficulty in displaying tabular customer fields for Shopping Cart and Bid Invitation. I have followed the steps given in the Consulting Note 672960.
    I have added 3 fields for the append structures of INCL_EEW_PD_ITEM_CST, INCL_EEW_PD_ITEM_CST_SC & INCL_EEW_PD_ITEM_CST_BID.
    Per Note 672960, Once the structures have been activated, the tabular customer fields will be displayed on the screen. But I am not able to see them under Shopping Cart Item level Basic Data Detail Screen as well as for Bid Invitation.
    Any thoughts or Am I missing some steps here.
    thanks, Ram P

    The SAP Note also says the following:
    =====
    If you define fields for the first time, the system generates a screen for the display. If you create or delete fields, the screen must be regenerated. To do this, start report BBP_DYNPROS_GENERATE, change the proposed program to SAPLBBP_PDH_CUF and execute the report. Select the checkbox for the screens with the descriptions BBP_PDS_HCF for the table-like fields at the header and/or with the description BBP_PDS_ICF for the table-like fields at the item. You can use the 'Copy' button to enforce a regeneration of the screens.
    =====
    You may want to regenerate the screen according to the Report: BBP_DYNPROS_GENERATE.
    But adding to Structure: INCL_EEW_PD_ITEM_CST_SC, INCL_EEW_PD_ITEM_CST_BID and INCL_EEW_PD_ITEM_CST should have worked if everything referencing these structures are compiled and activated correctly.
    Hope that helps,
    stirfry...today is 'tofu'

  • Adding custom field in shopping cart transaction

    Hello,
    I have done the following things apart from enhancing the INCL_EEW_PD_ITEM_CSF and INCL_EEW_PD_ITEM_CSF_SC structures.
    1) Executed BBP_DYNPROS_GENERATE for SAPLBBP_PDH_SEARCH and SAPLBBP_PDH_CUF
    2) As I realised later that CI_BBP_ITEM_SC and CI_BBP_ITEM were present in the system locally I tried one by one both the methods as follows.
    -Deleting the EEW includes and adding the tracking number in the above CI structures and activating the modify_screen badi with dispaly and input fields as X
    -As this didnt work, I deleted the CI structures and again created EEW inputs so that only EEW structures are present for the customer fields.
    but even then it didnt work. furthermore, I am not able to debug the implementation of badi BBP_CUF_BADI_2 at all from the bbpsc03 transaction.
    2) Carefully followed the notes
    sapnote458591 User defined fields preparation and use
    sapnote672960 User defined fields2
    3) Checked the notes (but didnt apply these as they dont precisely pertain to the item fields of bbpsc03)
    sapnote1016297 Header customer fields are not displayed in bbpsc02
    sapnote1034079 customer fields not visible in shopping wizard
    4) Additionally checking the notes  
    sapnote537392 CUF Cust Filds on the 'Default value for items'
    sapnote710474 CUF.User-defined fields on search screen
    Could you please guide me with any more inputs?
    thank you very much
    rita

    Hi,
    How about note 954391 - Customer fields are not displayed?
    Also check whether you haev extended the proper sructures in note 672960.You need to extend INCL_EEW_PD_ITEM_CSF_SC & INCL_EEW_PD_SEARCH_ITM_CSF_SC for customer fields on item overview .
    You can also use the BADI to BBP_CUF_BADI_2, method MODIFY_SCREEN, table ET_FIELDS, XINPUT = 'X' and XDISPLAY = 'X'. to control the display of the custom fields.
    Also after running the BBP_DYNPROS_GENERATE program,you can restart the SRM server and check.
    BR,
    Disha.
    Pls reward points for useful answers.

  • Add fields in "customer fields" at item level

    Hi experts.
    Please i need a help.
    Im using the SAP CRM 5.0 win client.
    I will use the EEWB method to add new fields at the item level (CRMD_CUSTOMER_I). I believe that these fields will appear in the "customer fields" tab, but this tab isnu2019t displayed inside item details.
    Why its can be happen?
    Is some config. missed?
    Thanks in advanced.
    Daniel

    Hi Ratish
    First i wanna thank you for the reponse.
    In fact i didnt execute the EEWB yet.
    My question is, the tab "customer fields" isent displayed inside the item details so after that i run the EEWB and check "item" to add the fields, the tab "customer fields" will be displayed automatically?
    Thanks so much, i have added to you some points.
    regards.

  • Pass Parameter To Configuration Entry Point

    In TestStand 2010 I have added a configuration entry point to select a configuration file. (Configure\Select Config File). I'm displaying a LabVIEW GUI which basically prompts the user to select a file. The file path needs to be stored in "FilePath" variable in TestStand.
    Problem statement:
    1. I'm trying to modularize this configuration entry point. Hence, I would write to "Parameters.FilePath" variable of configuration entry point stored in process model. This variable would be of "pass by reference" type and should eventually update the caller sequence.
    However, I don't know how to pass the value from "Parameters.FilePath" to the caller sequence. I'm currently updating the station global variable directly which I think is not the correct method if I think of modularity.
    2. I want the configuration entry point that was created ("Select Config File") to be enabled only when testing has not started (I'm just using single pass for my project).
    Which variable in TestStand would tell me if the execution entry point "Single Pass" is called or not?

    hi bce,
    [ If I used a station global, how would my changes be saved? Can you do this programmatically? Is there a better way? ]
    When Teststand closes, it automatically saves the StationGlobals. You would use PropertyObjectFile.SaveFileIfModified if you needed to force the save. But you shouldn't really need to do this as the latest value is available to all sequences and sequence files.
    Regards
    Ray Farmer
    Regards
    Ray Farmer

Maybe you are looking for

  • Processing the multiple sender xml one by one in a time gap to RFC

    Dear Experts,          I have to process the multiple sender xml file one by one from FTP to RFC in time gap. For Ex:         I will place 10 xml file in a FTP path at a  time, PI is picking 10 file at a time and process it to RFC at a time. Any othe

  • Why is iTunes in safe mode?

    What is going on with iTunes, I connected my new iPad and suddenly safe mode freezes me out and nothing works and I cannot access my iPad through iTunes.  iTunes on my computer is also useless. What is safe mode , how did it get turned on and how can

  • Could not locate dreamweaver CS4 Resources Folder Mac OS X

    Hello, I just recently installed Adobe Dreamweaver CS4 on my Mac and am reciving the following error message. Could not locate the Resources file in the Configuration folder. This file is required to run Dreamweaver please reinstall the application.

  • Love this but can I do something like this using Fireworks?

    Hi all, Saw this site recently and really liked the background, http://www.rareview.com/ the subtule colours and gradients etc. I do not want to recreate this in Flash I am looking to hopefully do this in Fireworks for my site. I would love to use th

  • Linked Document Repository

    Can linked documents be moved from one repository to another? Example: Goods receipt attachments (document class FAX, document type ZMMIGR, content repository S1, object type BUS2017) Content repository S1 is Sales Documents Archive. Content reposito