Credit memo and subsequent credit

Can anybody tell what is the difference between a Credit memo and subsequent credit memo.
I am finding the impact of both on the PO as same.

Hi,
The difference betwen them is that a credit memo quantity and amount are
affected but in subsequent credit only the amount is affected nor quantity.
For example.
You have in your po history.
GR    amount quantity
x        10          10
IR (normal invoice)
x       10           10
Credit memo
x      5              5
Now you have invoice 5 amount 5 quantity
if you made a subsequent for per example
amount 5
in your po history you have pending
0 amount an 5 quantity
This quantity you must regularize with transaction MR11
Transaction mr11 only regularize quantities but not amounts,so for this is used
subsequent credit/debit.
I hope my explanation helps you now to understand the differences.
Best regards.
Antonio.

Similar Messages

Credit memo and Subsequent Credit/Debit Scenarios

Hi All,
I have to present all the invoicing scenarios to the client. These also include credit memo and subsequent credit/debit.
Can someone please give me some examples of these. What is the meaning,how to handle,how do these arise.I will have to run these for them on screen.Please can you help me out with these.
Regards,
V S

Hello,
Subsequent Debit and Credits
After an Invoice is successfully posted and the transaction is completed, Vendor approaches with additional amount invoice or correction in Invoice.You would like to post this additional invoice with reference to the original PO and item. Subsequent Debit / Credit functionality allows you to capture this difference without canceling original invoice.
Please check this link
http://help.sap.com/erp2005_ehp_03/helpdata/EN/a8/b99890452b11d189430000e829fbbd/frameset.htm
Regards,
Shailesh

Difference between Credit memo and subsequent credit

All SAP Gurus,
In MIRO, what is the difference between Credit memo and subsequent credit?
Regards,

Difference between Credit memo and subsequent debits/credits
Subsequent Debits/Credits are used in cases where the quantity is in the original invoice is to remain the same. For eg.
PO 10 - $10
Gr 10 - $10
LIV 10 - $11 (Logistics Invoice Verification)
The vendor invoice is more than that in the Purchase Order. In order to correct, the Vendor may send in another invoice for
the Increased amount or a credit memo for the increased amount.
If you approve of the price increase, post the subsequent invoice received as a Subsequent Debit/Credit Invoice.
If it is a credit memo that has been received, then post the credit memo as Subsequent Debit/Credit.
This would retain the quantity but reduce the amount.
Subsequent Debit/Credit is for the case when the credit is not for the full amount eg. if the Vendor decided to credit
only the $1 overcharged.
Credit memo is for the credit of the full amount and value.

Credit memo and subsequent GL account

Dear All,
I would like to clarify 3 point below.
when i do credit memo on full quantity, the double entry is hitting vendor and GRC account.
when i do credit memo on part quantity, the double entry hitting vendor GRC and stock account also.
when i do subsequent debit or credit, double entry hitting vendor and stock account.
1) May I know why credit memo, full quantity only hit GRC whereas part quantity hit GRC and stock?
2) May i know why subsequent debit/credit hitting stock account only?
3) credit memo must have to create return PO? without return PO can?
Thanks

Hi
credit memos and subsequent credits can be used to adjust the amount due to the vendor.
we usually receive a credit memo from a vendor if you where overcharged.
as in case of invoice .creit memo refer to purchase orders or good receipt
when you post credit memo,the total invoice quantity in the po history is reduced by the credit memo quantity.the maximum quantity you can make a credit for is the quanitty that has alredy ben invoiced.
During Credit Memo, It is making same accounting entires as it makes during Invoice posting
Regards
kailas ugale

Vandor crdit memo, subsequent debit memo and subsequent crdit memo

Hi,
what is the difference between subsequent debit, credit and credit memo in MIRO transaction.
In case of vendor had given us credit note with relevant to particular for which we had already completed the invoice verification and payment also paid.
in this case what document should i use i.e crdit memo, subsequent credit memo or subsequent debit memo??
plz suggest

Hi,
Difference between Credit memo and subsequent debits/credits
Subsequent Debits/Credits are used in cases where the quantity is in the original invoice is to remain the same.
Example:
PO 10 - $10
GR 10 - $10
LIV 10 - $11 (Logistics Invoice Verification)
The vendor invoice is more than that in the Purchase Order.
In order to correct, the Vendor may send in another invoice for the Increased amount
or a credit memo for the reduce amount.
If you approve of the price increase,
post the subsequent invoice received as a Subsequent Debit Invoice.
If it is a credit memo that has been received for reducing $1 of invoice price,
then post the credit memo as Subsequent Credit.
This would retain the quantity but reduce the amount.
Subsequent Debit/Credit is for the case when the credit is not for the full amount
eg. if the Vendor decided to credit & only the $1 overcharged.
Credit memo is for the credit of the full amount and value.
Thanks
Kalyankumar

Credit memo or sub credit for wrong quantity in invoice

hi,
vendor invoice printed wrong quantity.
po $10 * 10 = $100
migo - dr stock $100
         cr grc      $100
when receive invoice, additional 2 unit.
iv $10 * 12 = $120
in miro, i should not change the quantity as it will affect grc account.
miro - dr grc                      $100
         dr clearing acc           $20
         cr vendor                 $120
1 when vendor send in credit note of $10 * 2 = $20, should i create credit memo or subsequent credit?
2 how is the accounting entry like?
thanks

1) You have to enter the subsequent credit
2) The account postings for a subsequent debit/credit depend on the quantity that the subsequent debit/credit applies to:
If the quantity of the subsequent debit/credit is smaller than or the same as the quantity delivered, the system tries to post the subsequent debit/credit to the stock account. If the material is valuated with a standard price or if there is insufficient stock coverage for the quantity to be debited or credited, the amount is posted to a price difference account.
If the quantity of the subsequent debit/credit is larger than the quantity delivered, the system distributes the relevant amount proportionally. The part of the subsequent debit/credit that does not have a goods receipt is posted to the GR/IR clearing account. The remaining amount is posted to the stock account u2013 or in the case of standard price control or insufficient stock coverage u2013 to a price difference account.

Credit memo, subsequent debit and subsequent credit

Hi,
We have recently started using credit memo, subsequent debit and subsequent credit in SAP.
However, when ever user is taking print of this documents system is still showing as invoice verification note only
We want to differentiate this documents with other document types. could u plz explain me the config settings for this doc types provided by standard SAP.

Transaction OBA7, define document types which you require. Then, SPRO -> AR/AP -> Business transactions -> Outgoing invoices, credit memos -> Outgoing Invoices/Credit Memos - Enjoy -> Define Document Types for Enjoy Transactions. There you can define that new document types are default for process you want
regards

Credit Memo and Invoice (MIRO)

Hi Experts,
'We have posted many Invoice (MIRO) Vendor Credit, GR/IR Debit, also we have posted several Credit Memo (Vendor Debit, GR/IR Credit), document type of both the document is RE, how can I segregate them.
Please explain.
Regards
GR

GR,
I believe you have to look at both the Header and Item tables.
In table RBKP there is a field Invoice where X = invoice and no entry indicates a credit.
To determine if you are dealing with a normal invoice/credit or a subsequent debit/credit you then have to go to table RSEG and there is a Subsequent debit/credit field.
Invoice    Subs deb/cred
X                                      = invoice
X                      X             = subsequent debit
                        X              = credit
X                      X             = subsequent credit
Regards,
Nick

Diff bet credit memo and credit memo request

Hi
Can any one tell the difference between Credit Memo and Credit Memo Request
Thanks in advance

Hi,
Below is the information on crdit memo request.
Definition: A credit memo request is a sales document used in complaints processing to request credit for a customer.
Use: If the price calculated for the customer was too high (for example, with the wrong scaled prices or because a discount was forgotten), you can create a credit memo request. The credit memo request can be automatically blocked for checking. Once it has been approved, you can remove the block.The system uses the credit memo request to create a credit memo.
Structure: A credit memo request is another type of sales document like a standard order. For more information on sales documents, see Working with Sales Documents.A credit memo request starts the billing process.
=============================================
Below mentioned is the information on Credit Memo.
Definition: The term credit memo always refers to a credit memo from the vendor. Therefore, posting a credit memo always leads to a debit posting on the vendor account.
Use: As in the case of invoices, credit memos refer to purchase orders or goods receipts. They are used to correct the purchase order history if the quantity invoiced was too high, for example, if an invoice was too high or if part of the quantity was returned.
When you post a credit memo, the total quantity in the purchase order history is reduced by the credit memo quantity.
If you do not want the total quantity invoiced to be reduced, you must post the credit memo as a subsequent credit.
Hope this helps. Please let me know if you need more information and please assign points.
Rgds
Manish

Credit memo for subsequent acquisitions in Fixed Assets

According to the Fixed Asset help file - section Credit memo for Subsequent Acquisitions it Says " Fixed Assets *DOES NOT* allow posting a credit memo for a subsequent acquistion. What are the exactt circumstances in which Fixed Assets will block these credit memos. I have added subsequent Acquisitions and Fixed Assets appears to allow credit memo's where depreaction has not been run and also where depreciation has not been run. How does this blocking mechanism work?

Hi John
It appears that there is no good answer to your question. From my undertstanding, the SAP Fixed Assets add-on is a very basic solution, and does not anticipate many of the changes that can occur once an Asset is acquired. Frankly, it is pretty basic when handling the initial acquisition.
Not that this will help you with this particular install, but the Fixed Assets add-on from B1 Fixed Assets LLC does a very thorough job of creating Assets, where you can use any or all of Invoices, Credit Memos, and Journal Entries, mixing and matching to create the Asset. Once the Asset has be added, making Cost Adjustments is almost as thorough, and provides considerably more options to recognize the Cost Adjustment. You can see a viedo of a relatively simple Asset Acquisition on YouTube (www.youtube.com/b1fixedassets).
Let me know how you get this issue resolved - I am very interested.
Joe

Credit memo or subsequent ?

Hi
In bapi BAPI_INCOMIGNINVOICE_CREATE, how can I figure out when it will post credit memo and when it will post subsequent debit/credit?
Does the field INVOICE_IND in Header text detemines this?

Yes. Talk to your finance guy. However, following is my understand ...
it is a combination of multiple fields... Header/ item and GL account ..
if you want to create subsequent credit document - use atleast Header and item combination fields. It is been quite a while so i dont remember it exactly but try the combination....
headerdata-invoice_ind = space.
itemdata-de_cre_ind = 'X'. "Subseq'nt Credit.
glaccountdata-db_cr_ind = 'H' (Credit)
If you specify INVOICE_IND = Space and DE_CRE_IND (Item) = Space then it is INVOICE....
Correct me if I am wrong.... You could try the above combination to come out the correct info.

Intrastat and subsequent credit in subsequent period

Hi Gurus,
how should I manage a situation regarding Intrastat and subsequent credit in subsequent period, so not within the same period with invoice. To be clear, I prefer to give you an example as following:
1.     20.06.2010     GR for 1 PC with amount 100 EUR by PO
2.     20.07.2010     IR Transaction Invoice for 1 PC with item amount 100 EUR
3.     10.08.2010     IR transaction Subsequent credit for 1 PC with item value 5 EUR
When I execute transaction ENPA or MEIS to extract the records for period 08 August 2010, no data is selected for this period. My questions is how should I proceed to consider my subsequent credit which does not fall during the same period as invoice? In case it would be the same, no problem occurs as original invoice would be debited by 5 EUR (100 u2013 5 = 95 EUR).
System component information SAP ECC 6.0:
SAP_APPL 600 0013 SAPKH60013
I would appreciate a lot for your support. Many thanks already in advance.
Stefano

credit memos are not supported in SAP as you can read in docu:
http://help.sap.com/saphelp_sbo2005ao/helpdata/en/F3/4392579F5DC24E9FBE2FA84E9E7660/frameset.htm
Please read the local Intrastat guide, in many countries it just says that you have to file a correction per paper form to your statiscal office.
SAP explains this as well in OSS note 374682:
If a credit memo refers to a billing document which was already declared to authorities, proceed as follows:Here, you should create a written correction to the statistical office.Specify a data record to which the credit memo refers.
Check the documents of the statistical offices for information on when you have to declare the credit memo (limits for values and quantities).*********************************************************************

Diff: Linkage of Credit memo and Dispute Case in EHP 4 and EHP5

Hi Experts
I am bit confused ...on the Linkage of Credit memo and Dispute Case in EHP 4 and EHP5.
Does the following statement is valid in EHP4 or EHP5.
"You can add a credit to a dispute to close it or reduce the amount disputed."
If it is possible in EHP 5 or EHP 4, please let me know what is the procedure to follow?
If i need to activate anything in SFW5, please provide what is the Business function i need to activate.
Thanks in Advance.
Regards,
Meenkashi.N

Linking a credit note has nothing to do with EHP4 or 5. You have to do a config sertting:
Dispute Management-Process Integration with Accounts Receivable Accounting-Assignment of Open Credits and Payments-Activate Assignment of Open Credits and Payments
And make sure the business adapts the correct process: When you reverse a charge on a debit invoice you have to make sure the credit is properly linked to the debit note.
If this is the case then the credit will show up in the dispute case.
Rgds,
Richard

ISA credit memos and down payment does not display data R/3 E-commerce 5.0

Dear guru's
The Billing doc search in the ISA searches Credit Memos and down payments. However, system don´t found documents, but business partner have credit memos and down payments.
Some idea?

Dear guru's
The Billing doc search in the ISA searches Credit Memos and down payments. However, system don´t found documents, but business partner have credit memos and down payments.
Some idea?

Credit Memo and A/R Invoice linking

Hi
Please help me, how to find relation field between Credit Memo and A/R Invoice.
I delete invoice using credit memo with copy from function.
But when I view last credit memo, i cant find the corelation with my deleted A/R invoice number.
I found remarks, but i think remarks is not the link for document.
I really confuse about this. can anyone help me?
ps: i cant found the relation return and A/R invoice too..
Thanks so muchh

Just thought of another trick or two that you might try...
1. Open ANY Credit Memo and use the "Find" Icon (the binoculars in the Icon Line) or use "Ctrl+F" to put the credit memo window in find mode. Put an asterisk in the field where the credit memo number usually is and hit enter...
It should pop up a list of all credit memos with Remarks - look to see if your credit memo is there. Or you can sort the whole screen by double clicking on the "Due Date" column of the display.
You can view an individual credit memo by highlighting the line (making it yellow) and pressing Enter Key to check that out also...
2. If that does not work for you, you can always use the SQL route where the OINV.DocEntry = RIN1.DocEntry and get a list that way where you can look through it.
OINV = Invoice Headers and RIN1 = Credit Memo Lines
Good Luck - Zal

Credit memo and subsequent credit

Similar Messages

Maybe you are looking for