Credit Memo DFF does not contain information from the original invoice line
Hi
Customer is facing issue mentioned in Note: 364999.1
Issue: Created a credit memo against the invoice and noticed that the resulting credit memo lines do not contain the DFF information from the original invoice lines.
I found through Metalink that this issue was reported to Oracle for release 11.5.7.
Looks like the fix was to provide a check box in RAXSUMSC.fmb.
- One off Patch for 11.5.7 - Bug / Patch 2803629 (one-off patch)
- One off Patch for 11.5.8 - Bug / Patch 3411221 (one-off patch)
- 11.5.9 - nothing available !!!!
As per bug 2675652 the issue was fixed in a file RAXSUMSC.fmb, version 115.41 This BUG shows that it has been fixed by in 11.5.10
Customer is using 11.5.9 which has RAXSUMSC.fmb, version 115.40, we cant apply patches for 11.5.7 or 11.5.8 that are available.
Any pointers on what can be done ?
Thanks,
Hi Pat,
the project code (PC) on the marketing document may only be applied to the business partner (BP), hence the only row in the associated journal entry (JE) with this project code is that of the BP.
You can link project codes to specific accounts (CoA -> select account -> account details -> project code) & this project code will then be assigned every time the account is found in a JE.
If you require the project code to be applied to the freight, you may assign this project code to the account you have defined for this freight. The drawback is naturally that the project code will then be pulled every time this freight is used, regardless of whether or not the PC is associated with the BP or not.
It is possible to manually assign project codes to every row in a journal entry, hence this should also be possible with SDK. You might explore the possibility whether it might be possible to automatically assign the BP PC to all rows in the JE using a script.
All the best,
Kerstin
Similar Messages
-
Wsusscn2.cab file does not contain information of the Bulletins released in November.
MS released 16 new bulletins this November on Patch Tuesday.
However all our attempts to acquire any of the new patches failed.
Our initial investigation shows that information for these bulletins has not been added to wsusscn2.cab . we are completely dependent on this file for all the bulletin information and at this moment it appears that this cab file
has not been updated with the latest information. Extraction of the cab file shows that the last updated date if the internal files is 27th/28thOctober.
There is a package.xml file in the cab and that file would normally contain URL’s for the new patches.
I noticed the year and the month url’s only up until the last month. There are no entries for the month of November. Hence the patch acquisition cannot find information related
to the new bulletinsHello,
The TechNet Wiki Forum is a place for the TechNet Wiki Community to engage, question, organize, debate, help, influence and foster the TechNet Wiki content, platform and Community.
Please note that this forum exists to discuss TechNet Wiki as a technology/application.
As it's off-topic here, I am moving the question to the
Where is the forum for... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}}) -
I bought a macbook pro on november 2011 wich had Lion OS installed on it. Playback plug-in in Mainstage 2.1.3 does not play files from the beginning (it leaves out like 50 mSecs or so). Is there a way to revert to Snow Leopard OS?
BrettGoudy wrote:
...Is there any way I can install a partition that runs snow leopard on my early 2011 MB pro with what I have (new SSD, New RAM, Current version Lion running, no external drive, lack of original snow leopard disks [I lost them ] and the general 10.6.3 snow leopard boot disks)...
As the last post suggests, call Apple and order a replacement original disc for about $17. They will ask you the model and serial numbers.
Your retail version of Snow Leopard OS 10.6.3 will not work on that Mac as it requires a minimum of OS X 10.6.7 to boot and operate.
Another alternative is to again borrow another Mac to install your retail Snow Leopard into an external HD or partition, upgrade it to 10.6.8 and then clone it back to a partition on your MBP. -
During F110 run-How to pick profit centre from the Pur.Invoice line item ?
Could anyone please help me with a solution to this problem.
Purchase invoice line items have got profit centre recorded from Material master.
While doing the auto payment run F110, for foreign currency invoices, the exchange rate diff
is posted to a - realised exch rate diff gl a/c.
But there is no cost object attached.
Business wants the system to pick the profit centre from the purchase invoice line item
and put it in the line item record of the exch rate diff account.
Can I do it using OKB9 ? Could someone please explain how to do it.
ThanksHi,
With standard SAP this is not possible.may be you have to develop some custom program.
with my experiance,we always post to defualt cost center.
hope this helps you.
Thanks,
Rau -
The new tab is visible on the the tab bar but clicking on it does not open a new tab.Neither can I open a new tab from the File drop down menu, nor the Ctrl+T method as indicated in the troubleshooting guide.
Un-install the '''''Ask Toolbar''''' which many users have reported causing that problem.
*http://support.mozilla.com/en-US/kb/Uninstalling+add-ons
*http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on
<br />
<br />
'''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*Shockwave Flash 10.1 r102
*Next Generation Java Plug-in 1.6.0_24 for Mozilla browsers
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''<u>Download link and more information</u>''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#**'''''Be sure to <u>un-check the Yahoo Toolbar</u> option during the install if you do not want it installed.
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Firefox_:_FAQs_:_Install_Java#Multiple_Java_Console_extensions
#*Java Test: http://www.java.com/en/download/help/testvm.xml -
Adobe Captivate 6.0.1 published file is not containing images from the PPTX.
Has anyone had issues with Captivate not publishing images from the PPTx that show up in Captivate? What am I missing? I am running PowerPoint 2010 - and Captivate 6.0.1 and my published image results on some slides are poor quality, look dithered, and aren't retaining thier color or crispness. Some of the images from the PPTX aren't even coming across... here are two screenshots for example...
Unpublished view from within Captivate
Published view...Hi Vish - I did not create the powerpoint or the image. I am not sure what image type it was but I recreated the white background as a PNG and it seems to have worked. I will forward my white background along to the creator for future projects. Thanks. It was definitely a problem with the image they put into the PPTX file.
-
Flash does not load information from xml on DMM system
I have flash file load information from xml file. flash file and xml file i push on IIS server. In presentation i add URL of flash file but flash file not show information.
I try run URL direct from DMP is ok.
Flash file write for Flash litte 3.1 and use action script 2.0. DMS system test with DMM version is 5.3 and DMP 4310G.
Please point where the error and the notes on flash file use with DMM for my programmer.
Thanks!Hi guy's
I think I maybe faced with a similar issue.
I've been working on a flash build that pulls in xml feeds. Everything I have works great so far but I've only been able to test as standalone(Desktop) and in the browser.
When I tested standalone(Desktop) I did get the flash security popup but once I granted access it worked fine.
I've never used DMP 4310 before. At this point in time I dont have access to it either. All I know is that my swf will be put on it.
Can anyone tell me how the DMP 4310 will handle the flash security popup? -
It appears that the iPad, and also the iPhone do not retain information for prior years, such as appointments, etc. Unless there is an archive feature, which I have not found, valuable information is lost. Any help would be appreciated.
Thank you so much to JimHdk. A really simple solution, but I guess I am not totally familiar with my iPad. I have a high learning curve with my iPhone also.
-
Link posted on Facebook does not import Photo from the site
When I paste a link to a status line on Facebook, it imports the title and annotation of the page correctly. However, the Facebook does not show any photo from the page (as it does with other websites).
Is there a way to force Facebook to show a photo alongside the title etc?
I am trying to post for instance this: http://www.cykasy.cz/Atlas/Cycas_xipholepis.html
and would like to show some of the pictures on Facebook too.It seems that the only solution is to write a piece of code into the header of the page and that will tell facebook where to pull the title, description and the photo from. The code that needs to be inserted is below.
THE PROBLEM - this solution doesn't work if you have built your site using iweb. Everyone that has iweb has responded to the solution (everywhere this is written about) has said this.
Does anyone know another work around?
The solution for anyone without iweb:
<meta name="title" content="INSERT CONTENT HERE" />
<meta name="description" content="INSERT CONTENT HERE" />
<link rel="image_src" href="INSERT LOCATION OF PHOTO WEB ADDRESS HERE" /> -
Hi, I am not able to hear playback of audio from the speakers on my laptop. Only if I connect a headphone I am able to hear. Kindly help resolve.
Regards,
Vivek. V.Hi
1) Try a Hard Reset as follows.
Remove any devices connected to the notebook. Shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery, plug in the AC Adapter and start the notebook - check if the speakers are now working.
2) Please First check if the speaker icon on the unit is not muted.
3) Go to device manager and uninstall the Sound driver and restart and unit will install the driver automatically.
4) Try doing System restore to the date when the unit was working fine.
5) Try to update the driver from hp.com website for Audio & Bios.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath -
IPod touch music does not start songs from the beginning
the songs on an ipod touch does not start from the beginning how do you fix this
In your iTunes Library, check the songs to see if they are set to Remember playback position. If they are, turn that off and Sync the iPod with iTunes for these new changes to take effect.
Highlight a song, right-click/Get Info/Options>Remember playback position: -
Cisco 881 ISR IPSec VPN Tunnel does not pass traffic from the vlan.
I have a cisco 881 ISR Router with a site-to-site IPsec vpn tunnel to a mikrotik device on the other end (I inherited this from my client). The tunnel is constructed properly and is up, however traffic does not pass or get routed to the FA4 interface. I see in my packet captures that it hits the vlan1 interface (vlans are required on the L2 ports) and does not pass to the tunnel.
This is my configuration:
141Kerioth#sh config
Using 3763 out of 262136 bytes
! Last configuration change at 01:02:41 UTC Mon May 26 2014 by admin
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname 141Kerioth
boot-start-marker
boot-end-marker
logging buffered 51200 warnings
aaa new-model
141Kerioth#do wr mem
^
% Invalid input detected at '^' marker.
141Kerioth#wr mem
Building configuration...
[OK]
141Kerioth#sh run
Building configuration...
Current configuration : 5053 bytes
! Last configuration change at 01:38:06 UTC Mon May 26 2014 by admin
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname 141Kerioth
boot-start-marker
boot-end-marker
logging buffered 51200 warnings
aaa new-model
aaa authentication login default local
aaa authentication ppp default local
aaa session-id common
memory-size iomem 10
crypto pki trustpoint TP-self-signed-580381394
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-580381394
revocation-check none
rsakeypair TP-self-signed-580381394
crypto pki certificate chain TP-self-signed-580381394
certificate self-signed 01
30820229 30820192 A0030201 02020101 300D0609 2A864886 F70D0101 05050030
30312E30 2C060355 04031325 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 35383033 38313339 34301E17 0D313430 35323231 38323333
365A170D 32303031 30313030 30303030 5A303031 2E302C06 03550403 1325494F
532D5365 6C662D53 69676E65 642D4365 72746966 69636174 652D3538 30333831
33393430 819F300D 06092A86 4886F70D 01010105 0003818D 00308189 02818100
B001A012 2CA6970C 0648798B 2A786704 84F2D989 83974B19 9B4287F2 4503D2C9
173F23C4 FF34D160 202A7565 4A1CE08B 60B3ADAE 6E19EE6E 9CD39E72 71F9650E
930F22FE C4441F9C 2D7DD420 71F75DFC 3CCAC94E BA304685 E0E62658 A3E8D01C
D01D7D6A 5AF0B0E6 3CF6AF3A B7E51F83 9BF6D38E 65254E1F 71369718 ADADD691
02030100 01A35330 51300F06 03551D13 0101FF04 05300301 01FF301F 0603551D
23041830 168014D6 24878F12 1FFADF2F 537A438E 6DD7FB6B D79E4130 1D060355
1D0E0416 0414D624 878F121F FADF2F53 7A438E6D D7FB6BD7 9E41300D 06092A86
4886F70D 01010505 00038181 00771667 FCA66002 8AB9E5FB F210012F C50B586F
9A9640BB 45B4CEFD 030A38C0 E610AAC8 B41EF3C4 E55810F9 B2C727CF C1DEFCF1
0846E7BC 1D95420E 5DADB5F8 EFE7EB37 B5433B80 4FF787D4 B1F2A527 06F065A4
00522E97 A9D2335C E83C4AE1 E68D7A41 9D0046A7 ADCC282B 7527F84D E71CC567
14EF37EA 15E57AD0 3C5D01F3 EF
quit
ip dhcp excluded-address 10.0.16.1
ip dhcp pool ccp-pool
import all
network 10.0.16.0 255.255.255.0
default-router 10.0.16.1
dns-server 8.8.8.8
lease 0 2
ip domain name kerioth.com
ip host hostname.domain z.z.z.z
ip name-server 8.8.8.8
ip name-server 4.2.2.2
ip cef
no ipv6 cef
license udi pid CISCO881-K9 sn FTX180483DD
username admin privilege 15 secret 4 CmmfIy.RPySmo4Q2gEIZ2jlr3J.bTBAszoe5Bry0z4c
username meadowbrook privilege 0 password 0 $8UBr#Ux
username meadowbrook autocommand exit
policy-map type inspect outbound-policy
crypto isakmp policy 1
encr 3des
authentication pre-share
group 5
crypto isakmp key 141Township address z.z.z.z
crypto isakmp keepalive 10
crypto ipsec transform-set TS esp-3des esp-sha-hmac
mode tunnel
crypto map mymap 10 ipsec-isakmp
set peer z.z.z.z
set transform-set TS
match address 115
interface Loopback0
no ip address
interface Tunnel1
no ip address
interface FastEthernet0
no ip address
interface FastEthernet1
no ip address
interface FastEthernet2
no ip address
interface FastEthernet3
no ip address
interface FastEthernet4
description $FW_OUTSIDE_WAN$
ip address 50.y.y.y 255.255.255.240
ip nat outside
ip virtual-reassembly in
duplex auto
speed auto
crypto map mymap
interface Vlan1
description $ETH_LAN$
ip address 10.0.16.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
ip tcp adjust-mss 1452
ip forward-protocol nd
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip nat inside source list 115 interface Vlan1 overload
ip nat inside source list 199 interface FastEthernet4 overload
ip nat inside source route-map nonat interface FastEthernet4 overload
ip route 0.0.0.0 0.0.0.0 50.x.x.x
access-list 110 deny ip 10.0.16.0 0.0.0.255 10.0.1.0 0.0.0.255
access-list 110 permit ip 10.0.16.0 0.0.0.255 any
access-list 115 permit ip 10.0.16.0 0.0.0.255 10.0.1.0 0.0.0.255
access-list 144 permit icmp host c.c.c.c host 10.0.1.50
access-list 144 permit icmp host p.p.p.p host 10.0.16.105
access-list 199 permit ip a.a.a.a 0.0.0.255 any
no cdp run
route-map nonat permit 10
match ip address 100
line con 0
no modem enable
line aux 0
line vty 0 4
access-class 1 in
exec-timeout 30 0
privilege level 15
transport preferred ssh
transport input ssh
line vty 5 15
access-class 23 in
privilege level 15
transport input telnet ssh
cns trusted-server all-agents x.x.x.x
cns trusted-server all-agents hostname
cns trusted-server all-agents hostname.domain
cns id hardware-serial
cns id hardware-serial event
cns id hardware-serial image
cns event hostname.domain 11011
cns config initial hostname.domain 80
cns config partial hostname.domain 80
cns exec 80
endWhy do you have following command on the PIX?
crypto map outside_map 40 set transform-set 165.228.x.x
Also you have this transform set on the PIX:
crypto ipsec transform-set 10.112.60.0 esp-aes-256 esp-sha-hmac
This does not match the transfor set on the router:
crypto ipsec transform-set tritest esp-3des esp-md5-hmac
Where are you using the access-list/route-map
101 ? -
Wizard in a dialog window does not show errormessages from the database
I have a main window and some wizards defined with JHeadstart. The wizards are started as dialogs to get them in a separate windows from the main window. This gives me a cancel and a save button for the dialog in addition to the ones for the wizard.
I have managed to take away the cancel and save button from the dialog using custom .vm files. The problem is that then pressing the FINISH button for the wizard it closes the dialog window without showing errormessages from the database (ie constraint messages) and these only appear in the log. If I use the save button from the dialog it gives the errormessages, but does not exit the dialog even if there are no errormessages.
Is this a bug or is there another way I should have done this ?
The code for starting the wizard.
<af:commandLink id="StartVeiRegMerknad"
text="#{nls['TABLE_TITLE_VEIREGMERKNAD']}"
action="dialog:StartVeiRegMerknad"
useWindow="true" partialSubmit="true"
launchListener="#{DialogLaunchHandler.handleDialogLaunch}"
windowWidth="600" windowHeight="600"
returnListener="#{backing_show.backFromPopup}"
immediate="true">
<f:actionListener type="oracle.jheadstart.controller.jsf.listener.DoRollbackActionListener"/>
<f:actionListener type="oracle.jheadstart.controller.jsf.listener.ResetBreadcrumbStackActionListener"/>
<af:resetActionListener/>
</af:commandLink>Your finish button should call a custom managed bean method that executes the commit, checks whether there are errors, and only close the dialog of there are no errors.
To close the dialog in code, you can use this:
AdfFacesContext adf = AdfFacesContext.getCurrentInstance();
adf.returnFromDialog(null, null);
which is similar to using the <af:returnActionListener/> that you probably now used but should be removed from your finish button.
Steven Davelaar,
JHeadstart Team. -
The "Awesome Bar" is not working. It does not recall anything from the Bookmarks
Just updated to new Firefox. In the past, when I would start to type a site in the address bar firefox would complete it as it was already in my bookmarks. But now it does not do anything. It just sits there waiting for me to complete the address. I could start to type Netf and it automatically finish Netflix.com
Why is this happening. Also, for the first couple days of the new version I had to go back into Tools, Options and reset things at least 3 or 4 times before they would finally stay the way I wanted them.
I would tell it Never Remember History and after while I would look and it would say, Remember History. I wanted a Blank Start page, and it kept changing it. It's okay now but the Awesome Bar is not working at all.Do your bookmarks show up in the auto-suggest drop-down list?
''If not:'' Under Options > Privacy, in the bottom section, does it still show that Firefox should suggest Bookmarks in the Location bar?
If auto-suggest works but the autofill isn't happening, you could double-check that it has not been disabled here:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box above the list, type or paste '''autof''' and pause while the list is filtered
(3) If the '''browser.urlbar.autoFill''' preference is bold and "user set" to false, double-click it to switch its value back to the default value of true. That should work in new tabs.
It's it already true, hmm, I wonder whether this is a private browsing issue? (I didn't test with automatic private browsing.) -
ONLY ONE FIELD DOES NOT GET PREPOPULATED FROM THE DATABASE
I would really, really appreciate if someone can comment or suggest something that would help with the resolution to the issue I am currently experiencing.
Simple sample form that explains the issue can be accessed from the link below.
How to test the form:
Open the form.
Click on the yellow button to add new Task.
The problem is with Additional Product fields ( in blue). You can add as many of them as you want by clicking on the Red button with the +. Add some data and uploade in database. When you download it from the database, data will come back fine for all of them, except for the first one.
Any ideas or help would be greatly appreciated.
https://acrobat.com/#d=2vFWOlm56FmrC4owzpfHew
The code is behind the Red button with the +. Very simple. Perhaps is the indexing issue with the database. I do not know enough about it, to be able to send any suggestion to the DB guy.
According to the DB guy, data uploades without issue. It is the blank field when the form with data is downoloaded.It might be related to http://forum.java.sun.com/thread.jspa?threadID=583466&messageID=2988344
Maybe you are looking for
-
I am getting an error msg when trying to sync with I Tunes???
I am now getting an error msg (0xE8000065) when trying to sync with I-Tunes. This just started today Also would like to know how to find my passcode for Restrictions without restore the whole phone.
-
The kids like to play games in the car. i dont always want them to use my phone. I bought an Ipod touch partially for this reason but games can not be played if we are not close to WiFi. If would have known this I would not have bought it. Can I chan
-
A User facing a issue of "Collaboration Folder is not created"
Dear All, A user facing an issue of collaboration folder is not created even through they have created in the SRM Potal. Can anybody put some light on the issue as soon as possible. Thanks, Pranav
-
Hi All , I m doing the online interactive form project using Adobe Reader . In My NWDS I have A 6.0 version . So If Anyone can tell me how to upgrade it to 7.0 or above .
-
Any one reliably figure out Podcast syncing ?
Hello, My favourite promised feature for iTunes 11 was iCloud Podcast syncing. I'd have a list of subscriptions in iTunes on my Mac, I'd sync my iPhone once so it knew what my subscriptions were, and from then on my Mac and iPhone would be in sync. T