Credit memo to be created with reference to return delivery

Dear Gurus,
We have a requirement for mapping return process
Credit memo to be created with reference to return delivery (instead of with reference to return order)
Following issue faced in mapping the same:
Billing document No. 1234 dated 25.03.2010 where there is 4% VAT.
when we are creating return order with reference to billing document 1234
4% VAT is calculated since the Service Rendered date is 25.03.2010 (Copied form Billing document)
return delivery is created today 08.04.2010. (VAT revised to 5%)
when credit memo is created with reference to delivery document
VAT is calculated 5% which is applicable from 01.04.2010
since the service rendered date is appearing in billing document
08.04.2010 (the date of Post Goods Receipt).
The VAT should be actually 4% in Credit Memo.
regards,
Rajesh T

In the copy controls from delivery to Invoice, at the item level try to use pricing type C and Pricing source Blank ( Blank is order).
If it doesnt work , then you might have to go for a requirement routine for this Tax , based on the document category that is being processed, read the tax from the originating order.Assign the routine to tax condition in the pricing procedure.
Regards
Sai

Similar Messages

Debit Memo Request not created with reference to CRM Confirmation

Hi,
I have confirgured the service order and confirmation as a follow up document,
Service order contains both service line item and sales item,
Service order is replicated to ERP as sales order with sales item,
how ever debot memo request is not getting created in ERP against the confirmation i have created ,
*     i can see the price flowing to KO03 at CO, also have made settings in SCRM Billing integration for debit memo ,a new debit memo order type is created with internal number range.
*     my employee also exists in ERP,
*     item category for confirmation is also set to external billing when conpleted.
*     i am able to complete the confirmation document without any errors.
followed c26 documents.
please Suggest
regards
Nikhil Chugh

Hello Nikhil
Did you map your CRM transaction types with ERP Transaction as per step
3.2.4.4 of c26.
Regards
Naresh

Enable - Create With Reference in Sales order

Hi All,
I want to enable - Create With Reference in Sales order
We have 1 billing doc type YX1 to be used as reference for a sales order type ZX3
How to enable Create with reference from Sales Document type YX1 to Sales Document type ZX3.
Currently, I am getting error 'Copying from sales document type YX1 to ZX3 is not supported'.
Please let me know the steps to be followed.
Thank you!
Regards,
Shanu Jain

Hi,
The error clearly suggests that there is no copy control maintained b/w invoice YX1 and sales order type ZX3. You need to maintain that in SPRO > Sales and Distribution > Sales Documents > Copy control for sales documents. (You may check the correct node here). Here, you select the billing document to sales document.
Check for source and destination. You can take the source as F2 and CR (if ZX3 is a credit Memo request) as Destination document. You can copy the same and change the source and destination as YX1 as source and ZX3 as destination. Then, at the item level, if you have a new item category you can specify it as the 'Proposed Item Category'. Save it.
Now try to create the sales document ZX3 w.r.t YX1... It should work.
Hope this helps
Thanks
Mukund S

Condition types doubling/tripling/...when sales documents created with reference to other documents

Hi,
When I create a sales order with reference to a Quote, the pricing condition types are duplicating. Same is happening when subsequent documents like Billing, credit memo request and credit memo are created. Particularly, the condition types are doubled/tripled/.... in the subsequent documents. Because of this, pricing net value is calculated wrong. For example, freight charges getting added twice. I searched the forum and found similar issue was discussed at Condition types - Doubling UP raised by forum member Sridhar Vijjhalwar, however there is no solution added in it.
Has any other member came across this issue and resolved?
I have checked the access sequence and exclusive indicators are checked. Copy controls are also checked, looked good and I tested by adding copying type D/G. Checked OSS note also and found one OSS note 1459807 - Invoice has missing/incorrect conditions when created from a sales order.
but it is not solving the problem either. Issue also elevated to SAP for their investigation. Our system is SAP ECC 6.0 - EHP6.
Quote Pricing:
Sales order Pricing:
I appreciate any pointers to resolve the issue.
Regards,

what was the scenario, and how did you replicate?
It is a configuration for a new project (France country), however we found that the same issue popping up for existing business processes also. As for replicating, we just tried the same procedures, the issue is found in subsequent documents.
If you have observed one notable thing is - all the condition types which duplicated were Z Conditions, and the standard conditions were never duplicated at least in my case.
In our case even standard condition types like MWST, SKTO, GRWR, VPRS also shows duplicating.
if you can throw about the business process?
As you have mentioned order created with reference to quote was only the straight forward scenario?
I tested other scenario also, like creating a sales order, then delivery and then billing. In this case in billing document, the condition types are duplicating. If I create a credit memo request against the billing document, then it further duplicating.
I am not sure what is causing this. I initially thought it may be copy control settings pertaining to the new project, however other business documents also has the same issue. Other business are using different document types.
Thanks for your follow-up.
Regards,

Create with reference using BAPI_SALESDOCU_CREATEFROMDATA

Hi,
I have been trying to use BAPI_SALESDOCU_CREATEFROMDATA to create with reference. I am trying to use the fields REF_DOC and REF_DOC_CA in structure ORDER_HEADER_IN
but the created order is not copying any data from the referenced order. Aaprt from the ref order I am passing the sales area data and sold to customer. Am i missing something or is create with reference not supported?
Regards,
Hari.

Hi,
This bapi will work when you try to copy invoice to the credit memo request..pass the billing document number in salesdocument parameter and pass the sales document type(CMR type) in documenttype.
Thanks
Naren

Create with reference button - sales order

Hi,
This question applies for sales order creation.
When a sales order is created cand 'create with reference button' is selected, system automatically defaults to quotation field?
Is it hard coded that way or can we change it to a different default field Inquiry document number?
Thank you

Hi Pradyumna,
I was replying to a specific question whether we can default to inquiry document number and gave my answer to that specific question.
My system has copy control settings for IN to OR which I presume to be a standard copy control settings in all systems.
As suggested by Ravi, we can add this in copy control table in case it is not available in system.
Regarding your next point, I don't think that is the reason why system is defaulting to quotation.
The reason is because of field 'SD document categ' in sales document type (transaction VOV8).
If you assign C- order, then system would default to Quotation field when you use create with create reference button.
If you assign K - Credit memo request, then system would default to Billing field when you use create with create reference button.
If you assign H - Returns, then system would default to Orders field when you use create with create reference button.
Regards

Delete credit memo work item created in VA01 when the user change value

Hi,
In T.code VA01 Credit memo request is creating, this document will automatically create work item. Based on Net value in credit memo request, the work item should go for 5 levels of approval. After 1st person is approved, the workflow initiator realized that the net value in created Credit Memo request is wrong; he is going to VA02 and correcting the net value. Again we have to create new work item for this and delete the already created work item. Client has clearly mentioned when ever there is change in 5 critical fields in VA02 then only create fresh work item otherwise no need to create SECOND TIME work item. Net value is one of the critical field in the list.
How to track already created credit memo request and how to delete the previously created work item. What is the feasibility of this requirement and how to handle this situation?
Regards
Vijay

Hi,
Just put a Fork and put 1 out of 2 outcomes and in the first alternative, you put your witem that goes to user B. In the 2nd alternative, put a Wait for event "CHANGED". And after this, put a process control step with "Set workitems to Obsolete" or "Cancel workflow" etc., depending on your requirement.
Pl note that this will only take out old witems, but you need to send a new witem for which you need to trigger another instance of the workflow as well. pl put CHANGED event also as one of the triggering events and use condition editor to restrict the fields that triggers the workflow.
Also, look into the IMG config of the following path. This might be a fitting solution.
In SPRO, go to Financial Accounting (New)---> Financial Accounting Global settings(New) -
>Tools --->Workflow ---> Workflow for Document Parking -->Reset Release Approvals(Customers).
Here, you can list down the fields, the workflow should restart. But, then you need to give the workflow details etc., in the relevant config settings.
We have used this in restarting workflows for General Ledger(GL) documents' workflow when some important fields are changed.
For this config settings, look into the following help link.
http://help.sap.com/erp2005_ehp_02/helpdata/en/01/a9cdd8455711d182b40000e829fbfe/frameset.htm
Hope this helps.
venu

Sales Return: credit memo Should generate automatically with goods reversal

DEAR SD GURUS N EXPERTS,
Currently we are using following system of Sales return.
VA01: (Order Type: RE) --> VL01N (Return Delivery) --> VL09 (Goods Reversal) --> VA01 (Request 4 Credit Memo or remove billing bloc) --> VF01 (Credit Memo)
But, now my client want a such configuration that entry of Credit memo should happen along with Goods Reversal (VL09) - Automatically. They don't want to carry out VF01 separately.
Reason behind it: Customers has credit Limit, Suppose a customer has a Credit limit of 5,00,000 and we have delivered the Material of same amount. It means all the credit limit has been used. But now He has returned the material of 2,00,000. But it will not affect the credit limit until we pass Credit memo.
Please suggest the required configuration and what we can do in such scenario. Thanks in Advance.
DSC

Again I can tell you that the process what you were following (reversing the goods receipt) is totally wrong and it will have a serious negative impact on inventory. Either you should not create a return delivery or take the stocks into parent plant. If you dont want to show in inventory, then scrap it which is a standard process.
Coming to the requirement, there is no standard way to achieve this. Check these threads where the same topic was discussed
[Re: How to set up in SAP to have automatic billing after PGI |Re: How to set up in SAP to have automatic billing after PGI]
[automatic billing|automatic billing]
You have to apply the same logic for credit note also.
thanks
G. Lakshmipathi

Create credit memo automatically when creating returns to vendor...

How can i create create "Credit Memo" automatically upon creating
returns to vendor (Movement Type 122) considering right calculation of
the sales tax & withholding tax.

Hi,
There is a special display variant in the item list for invoice reduction. You enter
the invoice quantities or values that differ to the quantities or values suggested by
the system separately into the item list. (You can only enter data in these fields
when you have flagged the item as Vendor error: reduce invoice).
When you post a reduced invoice, the system creates two accounting documents.
The first document contains the invoice postings with the actual quantities and
values. The second document contains a credit memo for the difference between
the actual quantities and values and the default quantities and values.
Therefore, with invoice reduction, you do not actually reduce an invoice. Instead,
you also post a credit memo for the amount of the reduction. The amount payable
to the vendor is the value of the invoice reduced by the credit memo amount.
The PO history is updated with the unchanged default values.
When you post an invoice reduction, the system creates a message record. You
can use this to send a letter of complaint (notification of credit memo posting)
to the vendor.
Regards
Ankur

Can Two Invoice be created with reference to one Return order

Dear All.
Can two SR Invoice be created with reference to one SR Order.

Thanks JP Sir,
Much appriciated ,we are having SAP IS:AFS(Our Business is of Manufacturing & Marketiing.Consumer product.
Sir- I created a SR Order after creating it forgot to do PGR & without doing PGR I opened sales log in order & created SR Invoice without doing PGR & when I check it in VF03 ,Issue print out then there was not any material discription in Created Credit Invoice & when I checked Display document then there were no any delivery document then I came to know without doing PGR how material can be copied & then did PGR with reference to same SR Order n created another Invoice .but my question is that without cancelling previous SR Invoice how another Invoice can be created with reference to same SR Order.
Thanks,
Kamlesh

How to find these many credit memo has been created for particular day

Hi Frinds,
I am facing an issue where i need to search for partcular date in which i have to fetch how many credit memos have been created for that particular day.I donno what is the way to find credit memo for that particular day...
All your help will be valuable for me
Thanks in advance
kishore

Hi,
If i am not clear with my requirement let me put you all in much better way like this..
Through FBO3 tcode i am able to get the document for particular date..But that datas which gets fetched has Debit memo, Credit memo and few other datas also.
I want to fetch the credit memo document which should have only this flow
order no, credit memo request no,credit memo number and Accounting document to be fetched via
Condition. I think i am clear now
Plz help me on this
Thanks
kishore

BAPI Sales Order create with reference Invoice document

Hi
I am using BAPI ''SD_SALESDOCUMENT_CREATE'' to create debit memo request with reference Invoice document.
First time its successfully created with reference Invoice.When i am going to create 2nd time debit memo request with same reference Invoice and item
no its giving following error.
      Reference quantity:
10 EA (total referenced:
40 EA)
       Error in SALES_ITEM_IN 000010
       Condition ZSLS is not allowed as header condition
       Sales document was not changed
    Please help any one to resolved this issue.
   Regards
   Shyam

SD_SALESDOCUMENT_CREATE is not a BAPI. Is there any specific reason you're using this FM when the actual BAPI exists?
ZSLS is a custom condition. There might as well be some user exit that attempts to add it [possibly incorrectly], how would we know this on SCN? There is enough information in the error message to troubleshoot on your own, it seems. What kind of analysis have you done before posting on SCN?

Error while posting a sales order created with reference from contract for

Hi,
I am posting a sales document( Type: WA) created with reference from contract document( type wk2) for delivery. The item category in the sales order of the Item is WAN. On posting this document for delivery I am getting the error as "Item category WAN is not defined". Please help me out how to resolve this issue.
Thanks
Jayant

Hi Jayant,
I think its value contract releated error,
You suppose to check material item category group through T.code-MM02 into sales2 tab and maintain VCIT,
and do item category assignment through T.code- VOV4.
plz.maintain like that,
WK2 -          -VCIT-         -           - WAN(contract item category),
wk2 -          -        -VCTR-          - WAN((contract item category),
you should also maintain same against your standard Sales Document type and for Standard Item category into VOV4,
WA(standard docu.type) -VCIT-                             -                -TAN(your standard docu.type item category),
WA(standard docu.type) -         -VCTR(item usage)-              -TAN(your standard docu.type item category),

Sales Order CReated with Reference

Hi,
I created a sales order with reference to an existing order. I created delivery based on the new order that was created with reference. HOwever, if i try to get the sales order number of my delivery, the sales order that i am getting is the sales order number that was referenced. How will I retreived the new sales order number from VBFA?
Thanks,
Louisse

Hello,
         We can follow the below Procedure to get the Sales Order Number from VBFA Table.
1. Input the Delivery in VBELN field to get VBELV (Sales Order)
    Number with VBTYP_V = 'C' (Order).
2. Now, if the Sales Order which is fetched is the one which is
    referenced, then Input the Sales Order Number again in the
    VBFA Table into the Field VBELV and fetch the Sales Order
    Number (New) in the VBELN Field with VBTYP_N = 'C'.
3. You should be able to satisfy your requirement.
Hope it was clear.
Thanks and Regards,
Venkat Phani Prasad Konduri

Change of Sold to Party in Sales order created with Reference to Contract

Dear Gurus
I want to change the sold to party in Sales Order created with reference to contract.
When I create a Sales order with reference to contract the system copies all the partner functions- Sold to, Ship to, Bill to and Payer alongwith other data.
However Sold to is marked as "Grey" and not changable, rest of the partners can be changed.
There is no subsiquent document created with reference to this Sales Order.
Please advice.
Thanks a lot.
Regards
Raghu

Hi ,
Please follow the below mentioned step.
1) Create a partner function letts say Authorized SP .
2) Assign all the possible authorised SP (customer) in the contract.
3) When you create sales order with reff to Contract. Put the customer for whom you wish to create a sales order in release partner tab.
Hop this will resolve our problem
Regards,
Krishna O

Credit memo to be created with reference to return delivery

Similar Messages

Maybe you are looking for