Critical error while approving leave

Hi
In portal while approving leave i am getting the follwoing error .
Critical Error
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
   The running application consciously caused an abort with short dump., error key: RFC_ERROR_SYSTEM_FAILURE   
This error is comming only for few employees not for every one.
Can anybody please let me know the solution for this .
Thanks and Regards.

Hi,
First of all, check the short dump in transaction ST22, you probably find there much more details of the problem.
secondly, make sure that these users have enough authorisations (do a trace) in backend. They might be missing some RFC call related authoritsation.
Regards,
Karri

Similar Messages

  • Error while approving Leave request

    Hi,
    I am facing an issue while approving the attendance request of an employee via MSS. The error message comes for the leave request further in the queue.
    Error Message : No read authorization for infotype 2001/5006(Annual Leave) for employee number between 07.06.2010 and 07.06.2010
    Hoping for the early response.
    Thanks!

    I guess there is problem with the managers ID and the authorizations.
    Try to check in SU53 and speak to security team to run the trace and provide the necessary authorizations

  • Error while approving Leave request from UWL

    Hi Experts,
    We are getting following error while manager clicks on Universal Worklist to approve Leave Request. On system we have assigned ess id to employee no. 43 in IT 105-0001 but it gives error message about employee no. 167 which has nothing to do with this leave request.
    Please go through following ST22 error log..
    Short text of the error message:
    "No data exists in this period for infotype 0105 and employee 00000167."
    Trigger Location of Runtime Error
        Program                                 SAPLPT_ARQ_REQUEST_U
        Include                                 LPT_ARQ_REQUEST_UIAF
        Row                                     186
        Module type                             (FORM)
        Module Name                             DUMP_IF_ERRORS
    Source Code Extract
    Line  SourceCde
      156   ENDCASE.
      157
      158   IF lock_indicator = 'X'.    "ANK Note962342
      159     status_ui = c_req_sent.
      160     status_ui_text = 'gesendet'(s04).
      161   endif.                      "ANK Note962342
      162
      163 ENDFORM.                    " set_request_status_ui_text
      164
      165 &----
      166 *&      Form  dump_if_errors
      167 &----
      168 *       text
      169 ----
      170 *      -->MESSAGES   text
      171 ----
      172 FORM dump_if_errors
      173   USING
      174     messages   TYPE ptarq_uia_messages_tab.
      175
      176   FIELD-SYMBOLS:
      177     <message>  TYPE bapiret2.
      178
      179   LOOP AT messages ASSIGNING <message>.
      180     IF <message>-type EQ c_message_error.
      181
      182 *Note 1168656 begin
      183 *      MESSAGE x999(53) WITH
      184 *     <message>-message
      185 *     <message>-type.                                        "#EC *
    >>>>>       MESSAGE <message>-message type 'X'.
      187 *Note 1168656 end
      188     ELSEIF <message>-type EQ c_message_abend.
      189 *Note 1168656 begin
      190 *      MESSAGE a999(53) WITH
      191 *      <message>-message
      192 *      <message>-type.                                       "#EC *
      193       MESSAGE <message>-message type 'A'.
      194 *Note 1168656 end
    195
    196     ENDIF.
    197   ENDLOOP.
    198
    199
    200 ENDFORM.                    " check_errors
    201
    202 *&----
    203 *&      Form  prepare_customizing_attibs
    204 *&----
    205 *       text
    Would really appreciate kind guidance to resolve the same.
    Thanks.
    Aashish

    Hi Ashish,
    Short text of the error message:
    "No data exists in this period for infotype 0105 and employee 00000167
    This clearly suggests that the employee data is not up to date.
    Go to Tcode : PC00_M40_CLSTR
    here 40 is the country coding or the Molga value for India. Like wise which ever country you work for, enter the country code there instead of 40.
    Enter the pernr as 00000167 and you would find till which date the payroll for 167 has been run successfully.It has to be in green color.
    If the payroll is not run till the period in which you are getting the error ( which obvisouly is what the error means) try running the payroll by going to the Tcode : PC00_M40_CALC or you can ask your HR team to run this payroll for you and you are good to go.
    Good Luck!
    Sandeep Tudumu

  • Reg : Getting error while approving leave request

    Hello Experts,
    Manger is getting and error message u2018Work item 000000000000 cannot be readu2019 while
    Approving the leave request of one his reportee. This error is triggering for only one
    Reportee. 
    Experts please kindly help us.
    Regards,
    Raj

    Hi Raj,
    There are a number of issues that could cause this.  Can you share your scenario (where is manager approving the request - via SAPGUI, ESS, MSS?)  Are you using an SAP standard workflow?
    Plus, there are lots of threads in SCN on this topic.  Have you checked any of these?
    Good luck,
    Sue

  • MSS - Error while approving leave request

    Hi,
    I am facing an issue while approving the attendance request of an employee via MSS. The error message comes for the leave request further in the queue.
    Error Message : No read authorization for infotype 2001/5006(Annual Leave) for employee number between 07.06.2010 and 07.06.2010
    Hoping for the early response.
    Thanks!
    Edited by: Abhijit Chitale on Jun 2, 2010 6:52 AM
    Edited by: Abhijit Chitale on Jun 2, 2010 6:53 AM

    Hi,
    This is an authorization issue which needs to be adjust in the ERP system. Please ask your basis administrator to help you. The authorization object is: P_ORGIN

  • Authorisation error while approving leave

    We have ESS in place.
    while approving a leave request , which has been created by requestor changing an alreqady posted absence of type loss of pay , the Manager is getting the following error:
    No read authorization for infotype 2001/0402 for pers no 40000141 between 27.04.2010 and 27.04.2010
    No read authorization for infotype 2006/90 for pers no 40000141 between 01.04.2010 and 31.03.2010
    No read authorization for infotype 2006/91 for pers no 40000141 between 01.04.2010 and 31.03.2010
    No read authorization for infotype 2006/92 for pers no 40000141 between 01.04.2010 and 31.03.2010
    this error does not come while approving normal leave request , coming for requests which has been created by changing a posted leave.

    try to execute PTARQ in the backend and check it
    Thanks
    Bala Duvvuri

  • 500 internal error while approving leave request

    Hi All,
    One of my user when trying to approve leave request, he is getting the following error. it was working previously but suddenly thsi error has come
    500 internal server error
    Application error occurred during request processing
    Details: com.sap.tc.webdynpro.services.sal.core.Dispatcher exception: The requested deployable object 'sap.com/ess~lea' and application 'leaverequestapprove' are not deployed
    Can anyone advise on this error please!!!
    Thanks!
    Swarnaprakash

    Dear Swarnaprakash,
    Hope you are doing good.
    Do make sure that all ESS related applications/services are running.
    Please try to restart the applications this way:
    1. start the telnet admin tool
       telnet <hostname> 5<instnum>08
    2. logon using the J2EE Admnistrator user
    3. lsc (to list the available servernodes)
    4. jump <servernode> (usually jump 0)
    5. add deploy
    6. start_app -all
    Please have a look at the below for more information:
    [http://wiki.sdn.sap.com/wiki/display/TechTSG/(JSTSG)(Telnet)DeployController+Commands]
    and
    [http://help.sap.com/saphelp_nwpi711/helpdata/en/45/0ad8e787652d6ae10000000a11466f/frameset.htm]
    If the issue still persists, please check if all the SDAs have been deployed for ESS (SCA->SAP ESS and Business packages)
    Thank you and have a nice day :).
    Kind Regards,
    Hemanth

  • UWL Filter causing error while approving Leave Request

    Hi Guys,
    We recently applied MSS SP17 and we changed our UWL filter BADI to SWK1 Function group - SWK_LOCAL_INBOX_GET.
    The filter works fine, but when we try to approve leave request, it somehow calls this piece of code again and does not allow (DUMPS) BADI to set the filter saying - this field is not modifiable.
    Has anybody seen this before. Can anybody let me know how to resolve the issue?
    Regards,
    SC

    We added a code that if leave request calls this code...skip it.

  • Internal Server error while approving leave in absence management

    hi
    In my project absence mgt is applicable for Netherland employees. When an NL manager applies leave and his manager from puerto rico tries to approve it from UWL , the manager is getting the following ERROR on clicking on the leave request in his inbox task.
    500   Internal Server Error   Web Dynpro Container/SAP J2EE Engine/6.40 
    Failed to process request. Please contact your system administrator.
    Error Summary
    While processing the current request, an exception occured which could not be handled by the application or the framework.
    If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
    Root Cause
    The initial exception that caused the request to fail, was:
       java.lang.NullPointerException:
        at com.sap.xss.hr.lea.form.edit.VcFormEdit.setReadOnlyApprover(VcFormEdit.java:467)
        at com.sap.xss.hr.lea.form.edit.VcFormEdit.onInit(VcFormEdit.java:269)
        at com.sap.xss.hr.lea.form.edit.wdp.InternalVcFormEdit.onInit(InternalVcFormEdit.java:700)
        at com.sap.xss.hr.lea.form.edit.VcFormEditInterface.onInit(VcFormEditInterface.java:165)
        at com.sap.xss.hr.lea.form.edit.wdp.InternalVcFormEditInterface.onInit(InternalVcFormEditInterface.java:158)
        ... 37 more
    This UWL error in Leave approval workflow is coming ONLY when PR manager is trying to NL employee's leave .
    All other country managers ( US , CH , FR etc) are able to approve the leave without any issue.
    We are using the standard leave approval workflow.
    ANY SOLUTIONS Plzz???

    Hello
    The above issue can occur if the rule group , to which this employee belongs, the leave type is not configured correctly. Please check the view V_T556A_WEB. The leave type and the rule group need to be defined here .
    Also make sure that the counting rule for the leave type is also  define correctly in T556C. Once the leave type for the approver  which belongs to the rule group has been correctly configured, way it has been done for normal employees, there will not be any issue.
    Kindly complete the necessary customizing  and check your results.
    Thanks and kind Regards
    Ramana

  • Error while raising leave request

    Dear all,
    I am getting error while raising Leave request over ESS...Task WS12300111 locked for instantiation.
    As well as in MSS manager is not getting requests for approval..can anyone tell me on workflow front what shall be done.
    Regards,
    Rajasekar.

    check the WF is a general task ie PFTC and user has authoriation, Are you using any custom code through badi, then enusre Start_WF method is implemented.

  • Critical Error while upgrading workbook

    Dear All,
    I receive a critical error while I open a workbook in Bex 7.0 analyzer.
    After I see the dialog - "Workbook open for upgrade", I received this error.
    It says check the trace and I don't have a clue how to check the trace.
    Can somebody help me?
    Thanks,
    Praveen.

    Hi Arun,
    Thanks for your reply.
    Yes my GUI is latest with all 710 latest patches for:
    1. SAP GUI Patch 13
    2. BW 7.0 Add-on Patch 901
    3. BW 3.5 Add-on Patch 6
    Thanks and regards,
      Pratik

  • Error while approving file programmatically

    Hi All,
    I am getting the following error while approving the file(.aspx) programatically which is in the pages library of a subsite in a sitecollection.
    The file pages/abc.aspx has been modified by SHAREPOINT\\system on etc.,
    Please help me regarding this issue.
    Let me know if you have any queries?
    Regards,
    Kumar.

    Hi Hemendra,
    Thanks for your response.
    Plz check the below code and let me know if you need any clarifications?
                      SPSecurity.RunWithElevatedPrivileges(delegate()
    using (SPSite siteColl = new SPSite(strSiteChild)) // connectting to Sub site.
    using (SPWeb Childweb = siteColl.OpenWeb())
    SPList objList = Childweb.Lists["pages"];
    SPDocumentLibrary objLib = null;
    objLib = (SPDocumentLibrary)objList;
    SPFolder rFolder = objLib.RootFolder;
    SPFile objFile = null;
    byte[] byteArr = null;
    String fileName = System.IO.Path.GetFileName(strFile);
    FileStream fileStream = File.OpenRead(strFile);
    // Upload document ROW Research Teams
    SPFile file = objLib.RootFolder.Files[Path.GetFileName(strFile)];
    Childweb.AllowUnsafeUpdates = true;
    file.CheckOut();                                                 
    rFolder.Files.Add(fileName, fileStream, true);                                
    file.CheckIn("Checkin by coding");                                       
    file.Publish("Published");
    System.Threading.Thread.Sleep(1000 * 10);
    file.Approve("Approved");
    file.Update();
    objLib.Update();
    web.Update();
    Childweb.AllowUnsafeUpdates = false;
    Regards,
    Kumar.

  • Error while approving work item

    Hi All,
    I am getting error while approving a claim request; error is:
    error while inserting claim record xxxxxxx in cluster for employee xxxxxxxx
    This does not happen always, some time I am able to approve and sometime i got the error.
    I am using same set of user ids and same perspnal nos; does this thing matters and causing this issue or this should not cause this problem.
    Please advice!
    Thanks and Regards,
    Honey

    Hi Honey,
    Could you please check note number: 1374072 which is for the PY-IN-PS.  I don't think that this warning message that you are seeing is applicable to the UWL or generated from the UWL component.  Error messages like this are usually generated from the ABAP system and more specifically from the application area.  Another hint would be to check ST22 to see if there is a short dump occuring in the backend system.
    According to the note, this error will be thrown when:
    "Error on Approver Screen stating "Error while inserting claim
    record <Reference Number> in cluster for employee <Employee
    Number>". This happens only when the approver tries approving the
    request almost immediately after the employee has submitted the
    request."
    I hope that this information is helpful to you.
    Regards,
    Beth Maben
    EP - Senior Support Consultant
    AGS Primary Support, Business Suite & Technology
    Please see the UWL Wiki @
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/bpx/uwl+faq  ***

  • Error while applying leave request though poratl

    Hi All,
    In portal Employee is unable to apply any leave. The system is giving the error message as
    "As per policy, Casual Leave cannot be taken for more than 1 working day consecutively,
    Please utilise Privilege leave for this purpose. In case you do not have Sufficient PL balance, Please apply for LOA."
    But when trying to raise a "Privilege/ Sick" leave , he is still getting  the same message.
    So he is not able to raise any kind of leave.
    So can anyone please suggest a solution.
    Regards,
    Muni.

    Hi Binu,
    It is a Std error which you r getting in the system while maintaining EL on that day. Is 07.03.2012 is a paid holiday ?? Then it will give the same error while applying the leave on that day...
    You need to check the Holiday class for that abs type in the system.
    Regards,
    Prasad Lad

  • Error while approving time sheet "Internal Error Occurred"

    1) Time Sheet entry done for an employee b/w 3rd-5th Oct 2011, while approving it through T code - CATS_APPR_LITE, its giving the error " INTERNAL ERROR OCCURRED" !!!
    When the error is expanded, the below details have come up.
    Internal error occurred
    Message no. LR030
    Diagnosis
    The system has detected an internal program error which should not have occurred in a normal program run.
    Procedure
    To safeguard your data, notify the SAP hotline.
    2) Please let us know, is there any other procedure or way to approve the time sheets ???
    Reg,
    Hrishi - 9945607822

    Note 1315885 - CATS: Internal Error(LR030), in transaction CATS_APPR_LITE
    Refer and apply the mentioned note if applicable.
    Regards
    Sreenivas

Maybe you are looking for

  • Having some trouble with hidden and checkboxes on tabular forms

    My query is as follows: select distinct tt.name tasktype,ct.name costtype,htmldb_item.checkbox(3,1,NULL,'Y:N',':') "Add Cost", htmldb_item.text(4,defabscost,9) defabscost, htmldb_item.hidden(5,tt.tasktypeid) tasktypeid, htmldb_item.hidden(6,ct.costty

  • [solved] Mount/unmount extremely slow (relatively)

    When I first installed my system, mounting and unmounting took a relatively unnoticeable amount of time.  Now, mounting a single volume takes about a minute or more per volume, even for tmpfs volumes.  I don't seem to see any other performance proble

  • Help Me! (Nokia 5800 xpress music)

    I know that is my fault but i getted some viruses on my nokia 5800 xpress music! I do not know the type of the viruses but all i know is that is eating my memory! Even if i erased all things, i still have at sis aplications to much memori in phone so

  • Printing a waveform chart

    i am trying to print a waveform chart and it prints but it does not display the data on the printed copy of the graph? here is my VI Harold Timmis [email protected] Orlando,Fl *Kudos always welcome Solved! Go to Solution. Attachments: test1.vi ‏269 K

  • We have Topaz BSB signature pads not recognized in virtual environment

    I'm wondering if anyone else is having this problem. Windows 7 recognizes the device. Device lights up, captures the signature and puts it on the document. If you change the signature pad, the new one won't work. However, if you log in as another use