CRM 2007 integration with ECC 6.0

Hi Friends,
I am currently working on the CRM 2007 Web UI
I have created the copy of existing standalone CRM client which is already having products, organization, BP created in it.
Now I am planning to connect the CRM client with the ECC client.
Is there any special care i need to take while connecting both the systems?
Also while doing replication any extra care do I need to take?
Help will be definately rewarded?
Cheers,
Raj

Hi!
Check the SAP Best Practices documents
http://help.sap.com/bp_crmv12007/CRM_DE/HTML/index.htm
There have a look at
C71: CRM Connectivity
B09: CRM Customizing Replication
regarding the connection and replication
rollo

Similar Messages

CRM 2007 Integration with Lotus Notes 8.0 (Groupware Integration)

Hi
We are doing CRM 2007 Integration with Lotus Notes 8.0. So i need your help in this regard.I have the following documents with me.....
a) SAP CRM Groupware Connector Relase 4.0 (Installation Guide)
b) SAP CRM Groupware Connector Relase 4.0 (Administrative Guide)               c) MapBox 4.0 sp 11             &
d) Groupware Integration installation Guide.
We have started with Groupware connector Release 4.0 Installation guide
We stucked at
5.3 Installing Lotus Domino Groupware Connector
Procedure
1. Log on to your host using prepared Groupware Connector's administrative account.
2. Launch setup.exe
3. Click Next on the Welcome screen.
4. Read the text on the Installation Prerequisites screen and check if your computer meets all the software
and hardware requirements. If yes, press Next.
5. Select the type of SAP Groupware Connector you want to install. Check if you want to install instance of
Default Groupware Connector Proxy. Then press Next, wait while setup routine detects required
software.*
Now my questions are....
1. Where will this setup.exe come from?
2. Do we need to install the things in the same mannare listed above a,b,c,d?
3. As we are implementing CRM 2007, i hope we dont need install Mapbox.
Please help me in successfull Integration.
Thanks in Advance,
Ajay.

Hi Peter & Stephen
Thank your very much for quicke replies.
Peter in one of the messages Martin Dauer wrote the following recently on Oct 23 08. , so do you want me to confirm once again before proceeding further.
Re: Link between sap crm 2007 with lotus 8
Posted: Oct 23, 2008 10:30 PM    in response to: Naveen Raju       E-mail this message      Reply
Hi Naveen,
thanks for your detailed description. This is exactly the way how the Client GWI is getting set up. one little remark from my side on the steps.
The user field are not required to be filled if you use Lotus Notes. this is only for the case of MS Outlook where you can start the synch from the OL Screen as well.
The password field is not used with either groupware system. So you leave it blank and with the first replication run you are asked to type (and maybe save) your password. it is there as the application is shared with Mobiel sales as well and therfore we could not get rid of it.
Supported platforms
In general both the server and client GWI were tested with Lotus 8.0 and CRM 7.0.
For server GWI Domino 8 is already supported for greater CRM 5.0, so should work with LD 8.0.
The installation guide for GWI is available here ...
http://help.sap.com/saphelp_crm60/helpdata/en/44/559f3699d908fae10000000a422035/frameset.htm
I case of further issues pls contact me by mail or to this post.
best regards.
Martin
Thanks & Regards
Ajay

MS Exchange 2007 integration with ECC 6.0

Hello Experts,
   We have ECC 6.0 and MS Exchange 2007. We need to integrate ECC 6 and MS Exchange .
   Mails sent from MS Exchange should be received in ECC 6.
   What is the method to do this ?
   Mails sent from MS Exchange to ECC 6.0 should be available in SAPGUI Inbox..
   MS Exchange supports MAPI format and ECC Mail Inbox supports SMTP . So how should it be integrated ?
regards,
Pravash Raikar

Hi!
Check the SAP Best Practices documents
http://help.sap.com/bp_crmv12007/CRM_DE/HTML/index.htm
There have a look at
C71: CRM Connectivity
B09: CRM Customizing Replication
regarding the connection and replication
rollo

CRM 3.0 integration with ECC 6.0

Hi all, I wanted to confirm if CRM 3.0 can be integrated with ECC 6.0
If yes, then which support pack,etc. will be applicable and what all issues could be encountered in integration?
Thanks in advance.

Hi Animesh,
just to be clear.
the CRM and the backend ECC60 are communicating via Plug -ins
you can read more information here
http://service.sap.com/r3-plug-in
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000601131&
The other SP level of the systems (BASIS etc.) are independent.
Once you could conect the systems at basis level. You can begin your work at
Application level.
Whether you can have problems here please ask the CRM Gurus in a separate therad in other forum.
I Hope I have answered all of your questions.
Kind regards
Imre Takácsi-Nagy
Senior Support Consultant II.
SAP Global Support Center Austria
Netweaver WEB Application Server ABAP / JAVA

How is the integration with ECC in SRM 7.0??

Hi,
Working with SRM 5.0 or 5.5 the use of XI for integration with ECC is not mandatory because when we send any document from ECC to SRM like requisitions (to convert them in shopping cards) or when we send any document from SRM to ECC like shopping cards, PO´s, contracts, we only use the RFC´s and the abap programs.
Is the same behavior with SRM 7.0?????
Could the integration from SRM 7 with ECC 6 work with RFC´S without XI or for this vertions is XI mandatory?????
Thanks

SRM70 is closely integrated with XI for transferring docs between ECC and SRM. SAP introduces eSOA tech nology with SRM70 and hence all documents like PR from ECC to SRM, Central Contract from SRM to ECC, PO creation (Classic), etc uses this techn ology.
Thanks,
Jagadish

Documentation on CRM billing integrated with R3

Hi gurus,
anybody has documentation (functional could be fine) on CRM billing integrated with R3 FI-AR/AP?
It's very urgent
Awards for any documentation provided.
Bye
C

Hi Carmine,
Please check following URL :
http://help.sap.com/saphelp_crm60/helpdata/en/68/691976cd2ef845a4e62437a82b67df/frameset.htm
Hope this could helps,
Gun.

CRM2007 integration with ECC 5.0

Hi All,
Will appreciate if someone can send a document or link that can help me with ECC5.0 and CRM 2007
Regards,
Suren

this is copied from the installation guide
Prepare an OLTP Backend System:
n SAP R/3 or R/3 Enterprise systems as well as ECC 5.0
systems require the R/3 Plug-In 2004.1 with at least
SP10.
See SAP Note 704564 (R/3 plug-in:PI 2004.1
installation/delta upgrade) and SAP Service Marketplace at
http://service.sap.com/r3-plug-in
n As of SAP ECC 6.0, the R/3 Plug-In is no longer
required. New and extended interfaces for integrating
SAP ECC 6.0 are directly contained in SAP ECC 6.0.
[SAP ERP 6.0 <Technology> on <Operating System>: Database
then it should be done as with any OLTP system.
I've done a connection to a R/3 Enterprise 4.7 system and that worked fine.
Follow the Best Practices documenation and you will be fine!
http://help.sap.com/bp_crmv12007/CRM_DE/HTML/index.htm

SAP XI 2 BI Integration with ECC 6.0

Dear all,
we are planning to do XI integration between ECC 6.0 to BI
1) How to Get the BI Standard data from ECC 6.0?
2)We are planning to integrate Standard BI reports with ECC 6 0 through XI.
Please sugget the scenario for integration between ECC 6.0 to BI through SAP XI.
Thanks In Advance.
Mahesh

Hi Mahesh,
Please go thru these links
To push data from BW to XI, please check
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20push%20data%20into%20bw%20from%20xi.pdf
To send data from XI to BW please check
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/integrate%20bw%20via%20xi.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40574601-ec97-2910-3cba-a0fdc10f4dce
XI-BI Integration unsing RFC
Pushing data from BI to XI using RFC Adapter
https://forums.sdn.sap.com/click.jspa?searchID=17734474&messageID=5878682
Thanks,
Shweta

Steps: SNC (Supplier Network Collaboration) Integration with ECC through XI

Hi,
Has anyone worked on the SNC(Supplier Network Collaboration) integration with SAP ECC via SAP XI.
Could you pls share any documentation related to this. And also could anybody tell me the setup required to go ahead with the integration.
Thanks,
S

Hi Xavier,
SNC integration with XI has predefined mappings. So ask your basis guys to download the XI content for SNC using with PI. Once they deployed you will have a builtin predefined content in XI. Within the predefined content mostly they all are xsl mappings.
If your requirement is with the standard idocs then you can use them directly. Else if their is customization they you may need to change the mappings according to your requirements.
Also check this help:
http://help.sap.com/esoa_scm_snc2007/helpdata/en/index.htm
Regards,
---Satish

Sourcing integration with ECC using PI (percentage rebate scenario)

Hi Experts,
Sourcing - OP 7
ECC - configurations done for rebate conditions as mentioned in standard configuratin guide
PI - SP02 patch 0
We are publishing percentage rebates in Master agreement from sourcing to ECC to create Online Agreement using standard predelivered content for PI from SAP, however ECC returns error in RFC response mentioning
No currency code found for ISO code P1 in field HEADER_CONDITION/CURRENCY_ISO
I checked PI content & I see for % rebates, field HEADER_CONDITION/CURRENCY_ISO is always populated in PI with P1.
What are the next steps to be done in ECC or in PI to overcome the mentioned error.
Any pointers will be appreciated, Thanks.

Hello Jeet,
I would suggest to check first that in both your SAP ERP and SAP Sourcing an ISO Code P1 for percentage exists. Further I would check if a rebate with an absolute amount works fine (also create multiple amounts and check if a scale is created in ERP, just to ensure that it works in general). E.g. check if the price condition/condition type exists and is configured correctly in ERP.
If that all looks good you might want to check the ERP transaction BBP_ES_ANALYZE. I recently created a SDN blog about some tips and tricks, it also explains this transaction, please see ERP integration with SAP Sourcing tips and tricks Maybe the error message(s) in this transaction will help you to better understand what is going on.
Hopes that will help you
Markus

Pro/E integration with ECC 6.0

I want to integrate Pro/E with ECC 6.0 in order to transfer/exchange engineering data such as materials, BOMs, engineering changes, documents, etc.
Does anyone know of Pro/E functionality or a 3rd party product that does this sort of thing?
Kind regards,
Rex L. Farris

A direct interface is developed by .riess GmbH and SAP. It is SAP certified and supported by SAP.
For more information,
Go to <a href="http://service.sap.com/plm">http://service.sap.com/plm</a>
Life-Cycle Process Support -> Product Development -> Integration -> MCAD Integration -> Pro/ENGINEER

C4C integration with ECC 5.0

Guru,
My company is looking for implementing cloud for customer, but our backend system is running on ECC 5.0.
SAP had strongly recommended us to upgrade our ECC before implementing C4C project.
Through some reading, it seems that integration prerequisite is ECC has to be version 5.0
Or there is any workaround to integrate (standard integration) C4C to ECC 5.0 through HCI? Like by applying or enhancing standard iflow that released for ECC 6.0?
Thanks.
Cheers,
Jim

Not sure where you have read that ECC 5.0 would be supported. The official SAP position is summarised in the table below. You can clearly see that some functionalities even depends on what EHP level you are at with ECC 6.0.
SAP PI and HCI leverage the same iFlow content.

Integration with ECC 6 and Xcelsius

Hi,
I would like to know if its possible to integrate Xcelsius directly with an ECC report.
For example, take the ALV data and 'send' it to Xcelsius in order to have an Xcelsius report.
I know that Xcelsius has (now), built in integration with BW queries, but wonder if that is proprietary with BW, or can the concept of integrating a report from BW work in ECC?
Please advise.
Thanks.
JP

Hi,
in case you would like to build an Xcelsius dashboard on top of ERP data you can use Crystal REports to connect to the ERP system (see here: /people/ingo.hilgefort/blog/2008/03/23/businessobjects-and-sap-part-4) and then you can use Live Office to connect Xcelsius to a Crystal REports objects. see here:
XC, CR and LO Part 1 of 4
/people/ingo.hilgefort/blog/2008/10/03/businessobjects-and-sap-part-1-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
XC, CR and LO Part 2 of 4
/people/ingo.hilgefort/blog/2008/10/07/businessobjects-and-sap-part-2-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
XC, CR and LO Part 3 of 4
/people/ingo.hilgefort/blog/2008/10/07/businessobjects-and-sap-part-3-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
XC, CR and LO Part 4 of 4
/people/ingo.hilgefort/blog/2008/10/10/businessobjects-and-sap-part-4-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
In regards to an ALV - there will be an integration with Crystal Reports but not for Xcelsius and keep in mind that an ALV is a push model and is only available when the transaction is been executed.
Ingo

Supplier Registration in ESourcing ( Vendor integration with ECC or MDM )

Hi All,
SAP ESourcing has the functionality of Supplier Registration. As per the functionality, Supplier will provide all the required information in the registration form. The Supplier form will go for approval to the Buyer / Purchaser. Once approved, the supplier will considered for RFx event. My questions are :
1 :Is there OUT OF BOX standard solution provided by SAP for integration of newly Approved supplier / vendor of ESourcing system with ECC so that system will automatically create new vendor in ECC.
2 : Is there OUT OF BOX standard solution provided by SAP for integration of newly Approved supplier / vendor of ESourcing system with MDM (Master Data Management system ) .
Please through some pointer on this ?
Regards,
Kalandi

Hi Kalandi
For your first question, if you deploy standard integration package provided by SAP for e sourcing-ECC integration, you can replicate approved e sourcing vendor to ECC using standard script (I think script name is "Publish to ECC" ).
In case you prefer a custom option,you can write a customized script to get a flat file (.CSV) download of e sourcing vendor whcih can be used to update ECC
As far as OUT OF BOX standard solution provided by SAP for integration of newly Approved supplier / vendor of ESourcing system with MDM (Master Data Management system ) is concerned, there is no standard solution provided by SAP but again since it is possible to get a CSV export of vendor field, it can be used to update MDM as well
Hope this helps!
Regards
Mudit Saini
Edited by: Mudit_UCB on Jun 28, 2011 1:20 PM

Crm sap integration with salesforce

hello experts,
My task is as follows:
Tight integration of SFDC and SAP CRM in order to make Business Partners in sync across the systems. This will be a two way integration wherein any changes made to any business partner must be reflected in the other system upon batch/ real-time execution.
Can anyone please give me some pointers to start off with this task?
I would be highly grateful for any sort of help.
Awaiting your response:)
Regards
Shilpi

Hello,
Have a look at these links,
[Integration of SAP with Sales Force|http://www.slideshare.net/Dreamforce07/i-t-e004-kelman-091807]
[SAP CRM Strategy|http://www.gsem.co.kr/sap_crm/image/1.SAP_CRM_Strategy_2006.pdf]
[Case Study: Real-time Manufacturing Dashboard|http://www.ridgian.co.uk/downloads/RidgianCICaseStudies.pdf]
[Salesforce Product Sheet|http://www.pervasive.com/salesforce/salesforce_product_sheet.pdf]
Thanks
Chandran

CRM 2007 integration with ECC 6.0

Similar Messages

Maybe you are looking for