CRM ISA 5.0 XCM Menu Empty

Hell folks,
I need an urgent help for the CRM ISA5.0 application that we are implementing.We followed all the steps from ext guide and deployed the custom application.The deployment is successful,but when we try to accces the xcm admin screen through
http://bsedev-borderstates:57600/b2b/admin/xcm/init.do
we get a blank screen with no menu options to configure the xcm settings.Please help me with this.Any help provided will be rewarded with points.

Hi Swathi
This is a common problem in CRM 5.0. You need to apply the following Patch on J2EE Server:
SAPJTECH SP10 Patch1.
Refer to SAP note number 993866
This patch will resolve this issue however you need to be very careful while applying this patch if any user specific java code is written and uploaded in IPC. Keep the backup for the same.
Please revert to me if this does not solve the issue. Award points if it does.
Cheers
Avi

Similar Messages

XCM Settings for CRM ISA 4.0 SP10

Hi !
We are currently upgrading a CRM 4.0 ISA application from SP5 to SP10. The XCM settings for the vanilla 'b2c' webshop has been completed and the vanilla 'b2c' application has been extended to a new b2c application using the old extended application files with the new 'buildtool'. However, when we try to run the extended b2c project, after successfully deploying the new .ear file, we get an error that the XCM settings couldn't be found. The vanilla 'b2c' application runs perfectly though.
Could anyone with experience in CRM 4.0 ISA application SP10 list any unique steps to get the extended XCM data for the extended application correctly in the 'web.xml' file ?
Cheers,
Ashok.

Hi Amit,
The config path for "%sys.global.dir%/xcm/${com.sap.dc_name}" should normally point to the standard XCM settings and ideally it should be outside the folder structure of the application (ie) not within either <Inst-Dir>:\usr\sap\SID\DVEBMGS00\j2ee\cluster\server0\apps\sap.com\crm.b2c\servlet_jsp\b2c\root\WEB-INF
or <Inst-Dir>:\usr\sap\SID\SYS\global\xcm\crm.b2c. Prior to CRM ISA 4.0 SP6, context parameters would determine this path during each deployment. This would ensure that an extended application would always point back to the standard XCM settings rather than having to maintain multiple XCM settings for each extended application. The reply from SAP OSS suggests that post CRM ISA 4.0 SP6, XCM settings would have to be maintained for each extended application (something that SAP supports) or the value of the config path of "%sys.global.dir%/xcm/${com.sap.dc_name}" should be changed individually for each extended application using the visual administrator to point to the standard XCM settings (something that SAP suggests as a work around but doesn't support).
Again, this problem is mainly caused by the fact that the context parameter of the XCM settings during deployment of any application has been removed from the SDM post CRM ISA 4.0 SP5. Removal of this context parameter from the SDM means that one would have to adopt either approach as suggested by SAP as above.
I hope this helps others out there who are migrating from a pre CRM ISA 4.0 SP6 to a post CRM ISA 4.0 SP6.
Cheers,
Ashok.

Open Catalog Interface (OCI) - Is CRM/ISA ready to be an External Catalog?

I have found much information here and on help.sap.com talking about how to set up an external catalog to be part of our catalog(s). But, there is a severe lack of information to educate myself as to whether our catalog(s) are ready to be added as an external catalog to our customer's SRM system for example.
The only valuable information I have been able to find on how to be sure that our CRM/ISA Partnershop can be used by our business partners in their various (SRM) procurement systems is here:
http://help.sap.com/saphelp_crm40sr1/helpdata/en/73/fd147fcaaf41489508aaac8e3e37b5/frameset.htm
We have a specific request that our CRM/ISA Partnershop be made available via our business partner's SRM system. I can find no guide to help me provide the requested information without basically just guessing on my part.
This is what they provided as a worksheet to return.
I assume the following or would like additional input:
1) They will need a Userid and Password.
2) For Language, we currently only support EN. Would I enter EN or just leave blank?
3) What do the following refer to? (These are the fields as requested and their suggested value by our customer)
~OKCODE       ADDI
~TARGET       _top
~FORCETARGET       YES
~CALLER       CTLG
HOOK_URL       (Assumed to be blank)
4) These are the required OCI fields they would be expecting from the our catalog, but they can accept all OCI Release 4.0 fields...Assuming the connections from the above settings are made properly, will CRM automatically provide the approrpriate detail or do I need to set something somewhere? All the XCM/DCM config settings for OCI seem to deal with an incoming External Catalog, not outgoing.
OCI fields
<input type='hidden' name='NEW_ITEM-QUANTITY[1]' value='3'>
<input type='hidden' name='NEW_ITEM-DESCRIPTION[1]' value='Descriptio'>
<input type='hidden' name='NEW_ITEM-UNIT[1]' value='DZN'>
<input type='hidden' name='NEW_ITEM-PRICE[1]' value='1.62'>
<input type='hidden' name='NEW_ITEM-LEADTIME[1]' value='5'>
<input type='hidden' name='NEW_ITEM-CURRENCY[1]' value='USD'>
<input type='hidden' name='NEW_ITEM-MATGROUP[1]' value='44121704'>
5) Do I need to 'do' anything not listed above to be sure our catalog(s) are ready to perform as requested?
Thanks for any clarification/links, etc
I've spent weeks off and on now to try to determine an answer I could feel confident in.

1/25/07 - Found a bit more info, but still need help determining if there are any additional settings/configs we need to make before starting to test with our Business Partner.
http://help.sap.com/saphelp_crm40sr1/helpdata/en/19/3a74482f5811d5b3890050da4cccf0/frameset.htm
I did these steps already, but have not tested yet:
Customizing and Settings in CRM / Internet Sales
Settings for receiving purchase orders in CRM
Purchase order without reference to a quotation:
In the CRM Business Connector, an XML purchase order is received via HTTP and it is converted into a sales order IDOC. This IDOC is then transferred to CRM and is posted there.
The delivered mapping service expects a purchase order in the OLD_EBP XML format, which is transformed into a NEW EBP XML, xCBL and finally a CRM IDOC XML.
The following settings must be made in CRM:
· Creating a partner profile for the sender
Path in SAP Menu
Tools -> Business Communication -> IDoc-Basis -> Administration -> Partner profile.
Partner type: Customer
Partner number: Number of the sold-to party in CRM
Transaction code: APLI (Individual IDoc processing)
Message type: CRMXIF_ORDER_SAVE_M
(key fields of table EDPP1:
-PARNUM partner number
-PARTYP partner type)
·         To view CRM address management errors in the document, the parameter CRM_USER_LEVEL must be set to value 9.
Path in SAP Menu
System -> User profile -> Own data -> Parameters.
I have asked my Basis contact to look into this portion:
Business Connector
Install a Business Connector 4.0 or higher.
Required packages:
· Sap_crm
· Sap_crm_customizing
· XSLT (only for BC 4.0, not required for BC 4.6)
After processing the purchase order that was received first, an inactive routing rule is created that is completed and activated.
Path in BC
BC Manager -> Adapters -> Routing -> Edit.
Transport: ALE (R/3 IDoc)
SAP Destination:
The ports must be activated and the service EbpXmlToRfc must be accessible before the Business Connector can receive documents.
Some CRM settings are hard coded in the transformations. They are in the file BasicOrderSettings.xsl, that are in the directory ...ServerpackagesSap_crmxsltincludesxcbl2sapcrm_xif.
These are:
Transaction type: TA (standard order)
Item object type: BUS2000131(sales item CRM)
Text ID under which the order text is created in the CRM order: 1000 (customer note)
Make sure that all of the available Business Connector patches are installed.
Our customer contact says they went with WebMethod instead of Business Connector, but I'm hoping we can make it work using BC without having to research yet another piece of the puzzle.
Any additional detail/advice from anyone that's set up their Partnershop to be connected to SRM EBP via OCI?
Message was edited by:
        Mike Anecito
    1/25/07

Image server and images in the product catalog(CRM ISA)

Dear Gurus,
I am using CRM ISA 5.0 R/3 version. My products in the product catalog has got images. I have assigned the image's to the products in the R/3 product catalog(WWM2)
In the b2b XCM for the webcatalog node, I need to specify the imageserver url. Can you please tell me what goes here. How do I find out what is my image server in my landscape. Please advice me how do I get the images in my ISA product catalog.
Thanks!
Vivek.

Hi Vivek,
In general image server is the web server. You need to talk to your network administrator to identify and setup the web server. Pass on the below document to your administrator to setup the publishing directories on the web server:
http://help.sap.com/saphelp_crm40sr1/helpdata/en/c7/d64e3c719d1742e10000000a11405a/frameset.htm
<b>Reward if helps</b>
Regards,
Paul Kondaveeti

Product catalog from mdm to crm isa

HI MDM GURUS,
COULD ANYONE PLEASE TELL ME THE STEPS TO REPLICATE PRODUCT CATALOGS DIRECTLY FROM MDM TO ISA (INTERNET SALES APPLICATION)
PRIYA

Hello,
I wish the answer was simple and I get all the 10 points. But, I have lot more to add than just giving a report program name.
Usually the CRM E-Commerce accesses the MDM product catalog as an external catalog. It is not customary to export the Catalog content from SRM-MDM to CRM-ISA. Instead the MDM catalog is Web Enabled for use as an external catalog by CRM-ISA. In the SRM system, the report program
/CCM/PE_START_REG_PUBLICATION
can be used to publish the catalog. Usually, this is scheduled as a background job to run periodically to publish the catalog.
The E-Commerce (CRM-ISA) has Open Catalog Interface (OCI) hooks available to do this. But this needs to be configured in the XCM to access such external catalogs.
Please read the contents in this link for a overview idea of [External Catalog Integration (via OCI)|http://help.sap.com/saphelp_crm50/helpdata/en/2f/86653fac7ab21ae10000000a114084/content.htm]
Also, start from [Service Market Place - SRM|http://service.sap.com/srm] and goto SRM-MDM Catalog to know more about the catalog and see the Export process for other possibilities.
Easwar Ram
http://www.parxlns.com

Error in JSP's for custom project created for SAP-SHRAPP crm/isa/web/b2b

Hi All,
we have NWDS 7.3, NWDI 7.3, JDK 1.6.
Imported the track, created a new custom b2b project. Added the corresponding dependencied on the project folders.
On build of the custom project, build was finished with some warnings. The depolyment was completed successfully.
We are able to open the XCM settings of the custom project. And even the application for the custom project is running fine, ordes are being saved, without any error.
However, when i open any JSP say order.jsp. It has some set of warnings and errors. The error description says ISACORE jar file is not accessible.
Kindly help, how to solve this issue?
Thanks
Ekta
PS. example of one of the error
Access restriction: The type OrderChangeUI is not accessible due to restriction on required library D:\NWDS
\eclipse\workspace.jdi\0\DCs\sap.com\crm\isa\isacore\_comp\gen\default\public\default\lib\java
\sap.com~crm~isa~isacore~default.jar
when i go to this location the JAR file is available.

all the SC are of version 7.01
Thanks!
     ED7
o SAP_JTECHS.sca     sap.com      SAP_JTECHS      7.02 SP8 (1000.7.02.8.1.20110704191740)
o SAP_BUILDT.sca     This is DTR component it will be in NWDI(DI BUILD TOOL)
o SAP-JEE.sca     sap.com      SAP-JEE      7.02 SP8 (1000.7.02.8.1.20110705065623)
o SAP-SHRJAV.sca
     SAP SHARED JAVA COMP. 7.01//
SAP-SHRJAV      701 SP4 (1000.701.0.4.6.20110722065102)
o SAP-SHRWEB.sca
     SAP SHARED WEB COMPONENTS//
SAP-SHRWEB      701 SP4 (1000.701.0.4.6.20110722073940)
o SAP-SHRAPP.sca
     sap.com      SAP-SHRAPP      701 SP4 (1000.701.0.4.6.20110722064714)
o SAP-CRMJAV.sca
     CRM JAVA COMPONENTS 7.01//
SAP-CRMWEB      701 SP4 (1000.701.0.4.6.20110722064233)
o SAP-CRMWEB.sca
     CRM JAVA WEB COMPONENTS 7.01///
SAP-CRMWEB      701 SP4 (1000.701.0.4.6.20110722064233)
o SAP-CRMAPP.sca
                    sap.com      SAP-CRMAPP      701 SP4 (1000.701.0.4.6.20110722063254)
o SAP-CRMDIC.sca
     sap.com      SAP-CRMDIC      701 SP4 (1000.701.0.4.6.20110722063636)
o SAP-IPCMSA.sca
     CRM IPC MOBILE 7.01///
SAP-IPCMSA      701 SP4 (1000.701.0.4.6.20110722064529)
o STRUTS.sca
     This was for only CRM 5 I think you should ignore this SC    Note 917001 - XCM configuration failes on OS/400
o TEALEAF.sca     This was for only CRM 5 I think you should ignore this SC   Note 900660 - TeaLeaf RealiTea Version 4.5 for CRM 5.0

How to Create Track in NWDI for CRM ISA 5.0

hi
can anyone please suggest me how to create track in NWDI for CRM ISA 5.0 for different archive files which consists of source files like(ex: SAP-SHRAPP.SCA,SAP-SHRWEB.SCA, e.t.c.) and as well as empty source files like(ex: SAP-SHRAPP.SCA,SAP-SHRWEB.SCA, e.t.c.).
As far as i know SAP does not deliver sources for SCs SAP-JEE,SAP_BUILDT and SAP_JTECHS so we cant have them as "Developed Software Components" when we eg:want to modify the SCs SAP-SHRAPP.SCA or CUSTCRMPRJ.SCA.
here what i want to know is depending on which SCs we actually want to modify, based on that our track want to be Configured differently.
My question is how to configure the Track in NWDI for this kind of scenario.
If the source is not given and only required software components are given then how to create track in NWDI. for example in CRM ISA 5.0
Regards,
Chandra.

SAP documentation is there in service market place for NWDI setup under netweaver. If you dont find document post your email id, I will send you the document.
regards,
Laxman

CRM - ISA customization

Hi
I am new to this CRM- Internet Sales Application. My client requiremnt is to modify the existing ISA Application. Client installed NWDI-NWDS successfully. They have created the track in the NWDI and imported into the NWDS.
Here , I am not understand how can we figure-out which component we need to modify for the customization.
For example , which java file , par file ...
If anybody having idea on the CRM-ISA applications please share it with me.
Sure.. points will be rewareded
Thanks
Ravi

Hi Fredrik,
the configuration files are kept outside of the application folder and even after upgrading it the configuration will not get lost - that is the main idea behind the XCM tool.
If you deploy a new ear (or even the already deploy one) you have two possible answer:
- re-configure the new application
- or use the old configuration
To reconfigure the application you can just start the XCM took and proceed as you did with the first application.
If you want to use the same (old) configuration you can just change one line in the WEB.XML file of the new one and the new application will be pointed to use the configuration files of the old one. I hope that this was lear enough.
In other words, after you deploy the first application a new folder will be created and this folder will contain three XML files with all the application configuration: please check the following path <j2ee instance>sys/global/xcm/crm.b2b in case you deploy the standard b2b application.
If you deploy the next application (named b2b_fredrik) another folder will be generated: sys/global/xcm/crm.fredrik - this folder will contain the configuration of the newly deployed application. But as I said if you want to use the old b2b configuration please open the web.xml file of both application and check how are these sys/global/xcm paths maintained - just make sure that the customer.* parameter contains the same path as in the B2B web.xml.
After you restart the application you can use it.
cheers
Borislav

Need some help in SAP CRM ISA.

hi ,
I am very new to the SAP CRM ISA environment .So please suggest me some documents ,books name etc.
To develope ISA applications what java skills we should have.
Please help me ...
Thanks in advance to all of you..
With regards
shanto aloor

Hello Shanto,
You need a couple of months of time to attend the following courses and couple of more years for really working in few projects to understand Well that is for people like me.
CR010 - CRM Basics,
CR100 - CRM Overview,
CR300 - CRM Sales,
CR800 - E-Commerce with CRM and
CR850 - E-Commerce with R/3
Okay, for the programming skills, you need very good Java / Web Application development experience. The application (ISA) is a simple Java based Web application (not a J2EE application) built on Struts framework. So, a good knowledge / experience of Struts is a big plus.
The [E-Commerce Enhancement / modification guide|https://websmp210.sap-ag.de/sapdownload/011000358700000469462006E/] is THE reference for ISA enhancements. I can not emphasize more on this. Every page, sentence is a must read in this document. This next document has [Examples and Tutorials |http://service.sap.com/sapdownload/011000358700006120622006E/]that go with the first document.
It is also good to have ABAP development and debugging knowledge to do good development. Basic understanding of the request - response cycle - the Java to ABAP integration are all good topics to focus and learn.
You must also know the Java development process in the NetWeaver (NW). You need to know the concepts of NW Development Infrastructure (NWDI). The enhancement guide has some information relevant to ISA development.
If you really go through the enhancement guide thoroughly, you will know what more you should know!
Easwar Ram
http://www.parxlns.com

How can I add a custom attribute to a catalog area? (CRM Isa Sales)

Gents,
How can I add a custom attribute to a catalog area? (CRM Isa Sales)
Actually I would like to use the Catalog Area Type (maintained in trx COMM_PCAT_ADM on Catalog Area Header level). This field doesn't seem to be available in J2EE webshop. (The field documentation says it is for documentation purposes only so I don't expect it to be transferred).
As this field is not readily available, I would like to add is as an attribute to the Catalog Area. BADI's PCAT_IMS_FEED_ATT and PCAT_IMS_FEED_VAL seem to indicate that it should be possible to add additional fields not only on product level, but also on Area level:
Example implementation code:
method IF_EX_PCAT_IMS_FEED_ATT~READ_NEW_FIELDS.
* Example, how to add new attributes to a indexcategory
* Possible levels are 'C'ategory and 'P'roduct.
* Field 'VALUE' carries the attributetype ('S'tring, 'I'ntegar or
* 'F'loat)
* Structure 'IS_OBJECTS' carries actuall identifiers
data: ls_fields        type comt_pcat_ims_feed_ux.
case iv_level.
    when 'C'.                        "Category Level
*     no new field
    when 'P'.                        "Product Level
      ls_fields-field = 'CUSTOMER_EXIT_FIELD'.
      ls_Fields-value = 'S'.
      append ls_fields to ct_fields.
*     exproduct fields
      ls_fields-field = 'REMAN_ABL'.
      APPEND ls_fields TO ct_fields.
      ls_fields-field = 'EXCH_BUS'.
      APPEND ls_fields TO ct_fields.
endcase.
endmethod.
However, when I create an implementation and add some code in the when 'C' part, the attributes do not seem to get transferred. (I've checked in the debug mode of the developer studio).
- My example code:
METHOD if_ex_pcat_ims_feed_att~read_new_fields.
* Possible levels are 'C'ategory and 'P'roduct.
* Field 'VALUE' contains the attributetype
* ('S'tring, 'I'ntegar or * 'F'loat)
DATA:
ls_fields LIKE LINE OF ct_fields.
CASE iv_level.
    WHEN 'C'.                        "Category Level
      ls_fields-value = 'S'.
      ls_fields-field = 'ZTEST'.
       APPEND ls_fields TO ct_fields.
    WHEN 'P'.                        "Product Level
ENDCASE.
ENDMETHOD.
and:
METHOD if_ex_pcat_ims_feed_val~read_new_fields.
CASE iv_level.
    WHEN 'C'.
     ls_fields-field = 'ZTEST'.
     ls_Fields-value = 'Value 1'.
     append ls_fields to ct_fields.
    WHEN 'P'.
ENDCASE.
ENDMETHOD.
In the ABAP debugger, I can see that my code is touched during initial and delta replications, however, after replication, the fields do not show up in the Java debugger.
Any ideas?
regards,
Wilco Menge

Hi,
How can I customize the /bin/wcmcommand or how can I make use of [2] to create a custom WCMCommand?
I think the "formUrl" is to post those input value to the jcr repository?
var createDialog = {
        "jcr:primaryType": "cq:Dialog",
        "id": CQ.Util.createId("cq-createdialog"),
        "title":CQ.I18n.getMessage("Create Page"),
        "formUrl": CQ.shared.HTTP.externalize("/bin/wcmcommand"),
        "params": {
            "cmd":"createPage",
            "_charset_":"utf-8"
I have added a field called "starred"
Moreover, when I using the firebug to trace the post command, I can see that the starred value is posted also.
:status
browser
_charset_
utf-8
cmd
createPage
label
b
parentPath
/content/keyword_elaboration
starred
c
template
/libs/collab/commons/templates/form
title
a
Source
cmd=createPage&_charset_=utf-8&%3Astatus=browser&parentPath=%2Fcontent%2Fkeyword_elaboration&title=a&label=b&starred=c&template=%2Flibs%2Fcollab%2Fcommons%2Ftemplates%2Fform
However, when I go to the crxde to view the node's attribute, the properity starred is not created
Are there anything I did wrong or missing?
Thanks.
Message was edited by: aslkit

How to display total "items" and "amount " in header.jsp in CRM ISA B2B

Hi,
I am modifying header.jsp in standard CRM ISA B2B application. Here we have summary of total number of items and total amount but it is coming in to button and for that below code is there in header.jsp and it display it as button text.
if (!ui.homActivated) { %>
!!" alt="" border="0" height="16" width="20">
</td>
<td class="vertical-align-middle" name="miniBasket" value="<isa:translate key="b2b.header.minibasket.default"/>" >
        <form name="basketForm" action="javascript:show_basket();">
     <input class="green" name="miniBasket" type="button" value="<isa:translate key="b2b.header.minibasket.default"/>"/>
    </form>
</td>
<% } else { %>

<td class="vertical-align-middle" align="right">
!!" alt="" border="0" height="16" width="20">
</td>
<td class="vertical-align-middle" name="miniBasket" value="<isa:translate key="b2b.header.collorder.default"/>">
<form name="basketForm" action="javascript:show_collective_order();">
    <input class="green" name="miniBasket" type="button" value="<isa:translate key="b2b.header.collorder.default"/>"/>
</form>
</td>
<% } %>
Now I want to display total number of items and total amount separately in two different <td> element.
How I can get total number of items and total amount in header.jsp I tried below code but did not get any success.
Insert below line in header.jsp with respective page import statement for class or let me know which class I have to import.
<%
     HeaderSalesDocument hdr =
            (HeaderSalesDocument) request.getAttribute(MaintainBasketBaseAction.RK_HEADER);
    ItemList items =
            (ItemList) request.getAttribute(MaintainBasketBaseAction.RK_ITEMS);
%>
And then I use
<td><%= hdr.getNetValue() %></td>
<td><%= items.size() %></td>
But it is not printing any thing and header page not display at all.
Pl. tell me how to get total amount and number of items in header area. Which class or object I have to use here.
I really appreciated any help from any one.
Thanks and regards.
Ashish Patel.

Hi, I tried another logic. I took value from Standard button, in which B2B application display total items and amount and I hide this field, to another text element.
Now I Am breaking that value in words and stored them in array and then trying to display that array with particular number which contains total item and amount through Java Script on Focus.
But problem here is, It is not getting updated automatically I have to click on new text files to trigger Onfocus event. How I can achieve effect like as soon as Standard button changes it's value which is now hidden filed my new text box should update automatically.
Thanks.
Ashish

CRM ISA b2b Vs ECC ISA b2b - IPC and BADI

Experts,
1. In CRM ISA b2b - We use CRM_COND_COM_BADI to implement the userexit logics and to populate custom attributes. What is the equivalent BADI or procedure in ERP scenario assuming I am using IPC in both the scenarios.
2. in CRM ISA b2b scenario, we have item and header BADI's like crm_isa_basket_head...What is thew equivalent BADI/Procedure in ERP ISA b2b scenario.
Thanks,
Bala

Hello Bala,
Regarding your first question, AFAIK, the userexit logic of pricing should be developed in IPC pricing routines and uploaded to the SAP system with appropriate userexit assignment.
About the second question, I am not very clear on what is the requirement? Do you want to modify certain data before a document is actually created/simulated in the SAP system? In this case, there are some enhancement points in the FM SD_SALESDOCUMENT_CREATE. This is what I used to modify/add/delete some data before the basket data is simulated or created as a quotation/order in the SAP ECC system.
Pradeep

Custom field in CRM ISA order header

Hi,
I was able to add a custom field in our CRM ISA B2B website order entry header following the instruction on the ISA_30..modification guide.
Right now I am able to store that custom header field data in a table in CRM called CRM_ISA_ADD_DATA which is also specified in the guide.
My question is how do I transfer this field to the actual CRM ISA Order Header text field so that it can be replicated to R/3?
Any suggestions would be appreciated.
Thanks,
Prasoon

Hi Hitesh,
I am also looking for the solution for the same problem.
I hope you have found the solution.
If you have found the solution please let me know and help me how to do it.
I really appreciate your help on this and I will assign you points for this.
Thanks for your help.
Ashish.

Authorization check in CRM ISA

Dear All,
I need some small help.
We have SAP CRM ISA MSA 5.0 SP8. We need to create some roles for the end users who access the system via the CRM Webshop. But we are not able to trace what authorization a user requires or lack. Like when I give a role which doest not contain the required object, few functions in the CRM webshop does not work. But we are unable to trace it, do we have something similar to su53 or a a trace (st01/st05). I tried actiavating the trace, but it does not work.
How do I know which object is checked/missing when user clicks something in a webshop?
Please help me in this.
Will surely reward points if I find anything which helps me.
Thanks.
Rajeet

Hi Rajeet,
The following links would help you to some extent.
http://help.sap.com/saphelp_nw70/helpdata/en/03/37dc4c25e4344db2935f0d502af295/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/43/3ab19fa272376de10000000a422035/frameset.htm
Cheers
Soma

CRM ISA Software Components required for Netweaver CE 7.1

Hi Experts
We are planning to migrate CRM ISA Application to Netweaver CE 7.1 environment. Currently we are in Netweaver 7.0 portal in which our CRM ISA 5.0 component is running.
What are the Software components required for CRM ISA to be compatable for Netweaver CE 7.1 environment.
Basically we need to know the SCA versions for CRM ISA compatable for Netweaver CE 7.1
Any kind of documentation which describes SCA's and installation steps are very much helpful
Thanks,
cnu

Hi cnu,
Information about CRM Java component should be described in master guide, for example CRM 7.0 , these components are
SAP Shared Java Applications 7.0
SAP Java Data Dictionary 7.0
SAP CRM Java Applications 7.0
SAP Shared Java Components 7.0
SAP Shared Web Components 7.0
SAP CRM Java Components 7.0
SAP CRM Web Components 7.0
SAP IPC Mobile 7.0
TeaLeaf 4.5
you should be able to find the SCA files in service market place using these component name.
Interesting to know why would you migrate from 7.0 to 7.1? or you just want to PoC? I don't think SAP will you support you unless you have made a very good deal with them.
I also heard the version of web channel will bring some really good feature though it's still based on NW 7.0 with ehp, are you going to "migrate" it once again?
good luck,
Denny

CRM ISA 5.0 XCM Menu Empty

Similar Messages

Maybe you are looking for