CRM logical system when uploading material from R/3

Hi experts,
CRM is connected to R/3 4.6b which its products are created in CRM by uploading.
We will connect to the same CRM to ECC 6.0 and then upload all new materials to CRM.
1. What is the correct information that should appear in CRM material master data (table comm_product) in the Logical system field (comm_product-logsys) ? The CRM logical system or R/3 logical system ?
2. In the future when I connect CRM to ECC 6.0, what will appear the source system (ECC 6.0) or CRM logical system ?
Regards
ahm

Hi,
I got confused reading your post.
Case 1: Are you saying that the products are created in CRM and then uploaded to ECC?
Case 2: And again you will connect CRM to ECC 6.0 and download all new materials to CRM?
1. What is the correct information that should appear in CRM material master data (table comm_product) in the Logical system field (comm_product-logsys) ? The CRM logical system or R/3 logical system ?
ANSWER: R/3 logical system
2. In the future when I connect CRM to ECC 6.0, what will appear the source system (ECC 6.0) or CRM logical system ?
ANSWER: If this is in Case 2 scenario then the source system would be ECC6.0 as we are creating materials in ECC6.0
PLease let me know if you have nay further Q?
Thanks,
Karuna.

Similar Messages

When moving material from Uml-zone, we -zone etc.

When moving material from UML-zone, We-zone, etc. Can you get the system to generate individual SU#'s.
I have 30 items of XYZ, I want to move all 30 at one time and generate 30 individual SU#'s......Is there a way?

Yes, this is possible and standard
If you post a material document to place the stock into the interum storage type try LT06 and use the document as a refrence, you will need to maintain the LE quantity in your material masters and the system will automaticaly propose the correct number of SU when you click "palletization".
if you do not maintain the LE you can enter the qty as (for example) 60 X 3000EA / 1 x 2500EA (or whatever unit of measure you use)
This is very standard for WM and easy to do once the configuration is in place and you learn the transactions.
LT06-LT12
Edit: if this doesn't fit for your needs please provide more info about the transactions you currently use to put the stock into the WE-zone and how you are currently moving it out

When uploading pictures from my iPad to my PC it wants to upload 8117 pictures but I have 8052 on my iPad will clicking erase after upload delete all my pictures including the pictures that are not included in the u

When uploading pictures from my iPad to my PC it wants to upload 8117 pictures but I have 8052 on my iPad will clicking erase after upload delete all my pictures including the pictures that are not included in the upload

Sorry mixed my numbers up I was in such a hurry to post the question uploading 8052 but I have 8117

Material description is missing when replicating material from R/3 to CRM

Hi Experts,
I am facing middleware error.
I have replicated a material from R/3 to CRM system.
I am able to see all the details in CRM except the material description in CRM.
The material i have replicated from R/3 to CRM has a description in R/3 but the same description is missing in CRM and it is showing blank.
Please help me to solve this.
Thanks

Hi,
Go to the COMM_PRSHTEXT see the table entries is there are not. Pass product GUID in this table and check.
Regards
Srinu

Error in Source System While Uploading Data from ODS to Data Target

Hi All,
Iam getting Following Error while Uploading data from ODS to Data Target
a) Error in Source System.
b)DataSource 80MKT_DS01 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80MKT_DS01 does not have the status of the source system in the Business Information Warehouse.
The time stamp in the source system is 21.06.2005 07:31:33.
The time stamp in the BW system is 27.11.2004 17:41:45.
Regards,
Chakri

This generally occurs when you change the data source or enhance the data source or the coonections to the datasoiurse are broken. To resdolve thius sort of errors just
1. Check for the coonect between the sourse & target systems
2 . Replicate the data sourcses.
3. Acivated TR,UR,& the rest of the flow But check in the source system if the structre is modified & is so do the changes in the IS , TR,UR correspondingly & the try to load .Hoppe it allows you to load .
Thanks ,
PSG

RAR - Logical system - SU24 upload

Hi people,
We use different logical system to include several ECC production systems. To have actual data, I need to upload the SU24 data from the backend system to the RAR (Upload objects)
There I have only the possiblity to load the SU24 data against a physical system, not for a logical system.
What happens now, if I am going to create a new function for a logical system and in this logical system are different ECC system referenced and each of them have another maintained SU24 data for standard transactions? Which data will be lead and relevant (pultruded) for the new function? Is it only the last loaded SU24 file?
Thanks for your feedbacks.
Regards,
Martin

Hi Martin,
You can upload SU24 data against individual connected physical systems only and last loaded data only will reflect. Logical system is work as basket for all added physical systems and provides flexibility for future usage.
If you want to create a new function for logical system - While adding Action (Transaction) in new Function you can choose/specify the available systems or ALL.
Thanks,
Ramesh K

Unreadable files when uploading photos from iphone 4s?

I have been trying to upload photos from my iphone 4s which I took recently onto my mac laptop and they seem to be unreadable and aren't uploading for some reason?
Any help appreciated.

If you want help you’ll need to give us more information. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

When uploading video from go pro and sonyhandy cam, takes forever and clips says hidden camera

Tried to upload video from sony handycam and also gopro...takes hours, and only can view the first half of clips. The rest of the clips have ? and say hidden camera. This is in Imovie. Both camera's are on the imovie compatible list. Any ideas?

I am only bumping your post up, I do not know what is going on. You have probably finalized your project by now. My first thought is you mention nested scene sequences and I thought the edl process would not accept nest. I would have to navigate off to re-research that statement.
Why I reply is I have been testing the edl process and have been able to achieve sucess with exporting edl with audio as 'none' but failure to import edl with WAV audio into Speedgrade.
Yes, another member has a post regarding 'Major EDL Export BUG in 8.2!' in this pasted link
MAJOR EDL Export BUG in 8.2!
which is error with respect to WAV, and same error results as I am seeing with my WAV edl export text files
My research has led me to your post and I find it very interesting. Thanks for the details. I am not done with my research, just using all the data to see how I can include audio in an edl without error. My previous method was to export the edl without audio and import the audio separately. I now want to include audio,
another thought is your text files - they appear short, as in they say FROM CLIP NAME: (clip name), but no file extension
EDIT: I think the problem I am having with exporting edl WAV files is that the edl text file does not show the .wav file extension. I can export an edl and have the WAV file extension show, but it is not the sequence that I want to export as an edl. The sequence that does export out the edl file extension is the sequence where I cut sections of audio into my next sequence. It behaves like your nested sequence not giving file extension.
Thats all I can say is that my edl isn't giving me a file extension for my WAV due to it being cut from another sequence.

IPhoto crashes my system when uploading photos to Facebook any help?

I can upload a few photos (getting errors) they still post when you check facebook, but after a few photos the entire system crashes and restarts, happend 3x now and i give up... posted in another forum (got kicked out to iPhoto boad lol) and so here I am again, anyone know whats up with this? im on Lion w/ all iPhoto updates installed.... i posted the crash report on my other post.. but was told dont post it until asked... so if you need it let me know...or if you know what might be causing it?

I found this fix posted by Paul Griffin:
Paul J Griffin
Re: My iPhoto will not longer let me hit the Facebook icon and immediately post to Facebook. Now it says, "Do you want to set up iPhoto to publish to Facebook?" which you still can't do. What gives?
Dec 30, 2012 7:26 PM (in response to laurafromhamilton)
Just solved it here after an hour+ of experimenting.
Try this:
• When you get prompted "Do you want to set up iPhoto of post to Facebook?" confirm and it will bring up your regular Facebook home page in asmall viewer window.
• Go up to the upper right corner of the Facebook page and log out, then hit the "Close" button at the bottom of the small viewer window.
• You'll probably get the same "Do you want to set up iPhoto to publish to Facebook?" prompt again. This time hit Cancel
• Now try to share your pictures to Facebook again. You'll get the "Do you want to set up iPhoto to publish to Facebook?" message again. Do it and this time hopefully you should get a prompt to login to your Facebook account. Enter your Facebook name and password. This should reset your connection.
• If successful you should get a prompt from Facebook that you can close the page. Close it and fingers crossed, all should work again. That's what worked for me.
See if it will work for you.
OT

When uploading photos from iphoto for ebay they look horrible

I'm new to Mac. I have a new digital SLR Nikon D40 that takes the most magnificent pictures. When I look at them in the iphoto library and even email them from the library, they look awesome. Also, if I click on a photo in my library it tells me the photos is 2000 x 3008 and 1.4 MB.
I went to do some listing on ebay. I use sellersourcebook.com for templates. Then you upload your pictures to them, they do the photo hosting and assign an URL to each photo you upload. When I do this, my photos look blurry, small & grainy. I emailed their tech support and they told me I don't have enough pixels. I don't understand how this is true? Then someone suggested photobucket as a free photo hosting site. The same thing happened. Also when I uploaded photos to Costco from home to print I got a warning saying the photo isn't good enough quality and won't print right.
When I upload it opens up finder, I click on pictures, iphoto library, data, 2007. I went to the camera shop today where I bought my camera to see if they could help. They suggested that I may be uploading the thumbnail and not the original photo. I thought I was uploading the original photo.
Can anyone help?

Welcome to the Apple Discussions.
When I upload it opens up finder, I click on pictures, iphoto library, data, 2007.
Yes, the Data folder contains the thumbnails created by iPhoto for quick display of your library. The original resides in the Originals folder. If you have applied any edits (including rotation) then the edited version is in the Modified folder.
But it can be difficult to know whether the photo you need is in Originals or Modified. Plus, it is recommended that you NOT delve into the iPhoto Library folder from the Finder. Any changes you make there will cause damage to your database.
The sanctioned way to upload your photos is to select them in the iPhoto application. Then do File > Export > File Export to a folder on your Desktop. The export dialog gives you the option to rename or resize the copies, if you like. Upload the Desktop folder, then delete it when done, as your files remain in the iPhoto Library.
Regards.

Get Error in source system when loading flatfile from application server

Hi
I'm loading data from flatfiles on the application server. In the datasource if I display the sample data. It shows fine.
But when I execute the infopackage I get an error when it is loading the data to PSA.
The error is
Error in source system
Message no. RSM340
There is no further information
But if I load from my machine it works fine.
Any help will be great

Hi,
As you can view display the sample data. It shows fine.
It mean there is no issues in BW (File path is correct, Data in Flat file is correct).
Then definetely its with the source system, which is resisting to pass IDOC to BW.
Now.we need to know the its problem with File on App serv or App serv itself?
Just check trying to Load another Flatfile in App serv.
Let me know.
Regards
Hari

Error when uploading data from Flat file

I am uplading data from Flat file.
When I am uploading it gives an error
An error occurred in record 1 during execution of conversion exit CONVERSION_EXIT_CUNIT_INPUT for field UNIT.
Can any one help.
Thanx in Advance.
Regards,
Pradeep.

Hi Pradeep,
Refer this link:
CONVERSION_EXIT_CUNIT_INPUT error in flat file load
Re: Error in Flat files upload
Also try this - In the transfer structure check the checkbox fo UNIT and retry the load. Hopefully it should be fine.
Bye
Dinesh

IView Template used when uploading role from R/3 to Portal

Hi all,
I was wondering what iView template is used when you upload a role from R/3 that contains Web Dynpro ABAP applications. I want to change some of the default parameters in the template, more importantly, close the Detailed Navigation panel on the left.
Hope this makes sense,
Thanks,
Kevin

Hi Kevin,
From your explanation, it seems you can see the iViews in Portal role editor under Content Administration.
Under Content Administration
Open the Role for Editing
In the Editor, select the iview and Click on OPEN button.
Now, you should be able to see the properties of the iView in the Editor.
Please check for the property "Code link", which give you the details of the class or template in use.
Hope, this will help
Cheers!!!
Biroj

When uploading photos from my PC to IPad, it gets to the very last stage and then just stops synching. I've tried multiple times and even from scratch, but same unsuccessful result. Very frustrating and not sure what I'm doing wrong.

When synching my photo library (selected folders) to my IPad, it reaches the last (6th) step and then I see the folders appear on my IPad for a brief moment, but then the synch stops and the photos failed to upload. What's the deal? After 6 attempts, I give up. THis should not be that difficult and I've spent way too much time trying to figure this out. Makes me want to throw out my 1st generation IPad and go with another tablet manufacturer. Anyone who has experiened this or knows how to remedy would appreciate hearing from you.
Tx

Never have this problem. That's just weird. Maybe there's something wrong with one of the photos?
Try viewing those photos with quicktime first?

Logic crashing when importing OMF from Final Cut

Greetings, an editor of a 20 minute short film exported a 16 bit 48 k OMF from Final Cut Pro that I imported no problem in Logic Pro 7.2.
Then, he made some new cuts to the video so he exported a new OMF at 48 k, 24 bit ... this did not import properly. Logic kept "unexpectedly" crashing when importing the composition part of the OMF, every time crashing on one specific file.
So, he exported another OMF at 48 k, 16 bit (because we thought it was a problem with 24 bit) but the same thing keeps happening .. I absolutely cannot import these new OMFs, they keep crashing Logic while importing the composition aspect of the OMF at one specific file ... but, I can still import the original OMF ... there is something wrong with the new OMFs I think ..
Does this sound familiar to anyone? is there something wrong with the way he may be exporting the OMF from Final Cut? .. any suggestions or work arounds would be incredibly appreciated ...

Probably the editor is using sounds with mixed sample rates in the new OMF !

CRM logical system when uploading material from R/3

Similar Messages

Maybe you are looking for