CRM Migration from Zos and DB2 to Unix and UDB

We will be migrating our CRM application from mainframe and DB2 to a Unix environment with UDB.
Do you have any experience and/or guidelines ?
Thanks
Ronny

Hi Ronny,
I guess the right forum to post this question is SAP CRM: Webclient UI - Framework
Thanks and Regards,
santo.

Similar Messages

  • Migration from Zos and DB2 to Unix and UDB

    We will be migrating our CRM application from mainframe and DB2 to a Unix environment with UDB.
    Do you have any experience and/or guidelines ?
    Thanks
    Ronny

    Hi Ronny,
    I guess the right forum to post this question is SAP CRM: Webclient UI - Framework
    Thanks and Regards,
    santo.

  • Re Migrating from Oracle to DB2

    Hi All,
    We are migrating from Oracle to DB2, so just wanted to know what will be the impact when we do this, i mean what all necessary steps should be taken to do so. I am a technical consultant involved in this project so not much idea regarding this.
    Also please let me know will it effect the custom i mean the Z programs that we have created. Please let me know regarding this.
    Thanks and Regards,
    Salish.

    > We are migrating from Oracle to DB2, so just wanted to know what will be the impact when we do this, i mean what all necessary steps should be taken to do so. I am a technical consultant involved in this project so not much idea regarding this.
    A heterogeneous migration (changing database and/or operating system) implies a certified migration consultant doing the migration, otherwise you'll loose support from SAP for problems during the migration and for the target system (http://service.sapcom/osdbmigration --> FAQ).
    > Also please let me know will it effect the custom i mean the Z programs that we have created. Please let me know regarding this.
    Depending on how you access the data you may need to increase/delete indexes or change the programs to get a better speed.
    Markus

  • Migration from Oracle to DB2 UDB on Unix

    Hi SAP Expert
    We have different SAP landscape  in our company on Oracle DB
    Due to High Oracle Licensing cost we are planning to migrate our Database to DB2 to reduce license cost
    I would like to know how Reliable DB2 is for SAP? What is % of SAP installation on DB2 worldwide
    Also will there be challenge migrating DB from Oracle to DB2
    I would appreciate if you can provide guidance on the question
    Thanks in advace
    Thanks
    Deelip

    > I would like to know how Reliable DB2 is for SAP? What is % of SAP installation on DB2 worldwide
    DB2 was and is used on quite a number of internal SAP systems that create support packages (if you check the import logs of the support packages and search for "source system).
    SAP doesn't give any exact numbers of installations compared to other databases, they did that in the past.
    > Also will there be challenge migrating DB from Oracle to DB2
    As with every database migration you'll have to check your custom programs and secondary indexes, backup strategies and methods and such.
    > I would appreciate if you can provide guidance on the question
    Be aware of the fact that you must have a certified migration consultant doing the migration on-site, otherwise SAP will deny OSS support and bill (see http://service.sap.com/osdbmigration).
    Markus

  • New iMac, migrated from macbook and now mail won't work. Tried re-installing operating system, still doesn't work. Can anyone help me to get mail working? thanks

    I just bought a new iMac and I thought that it would be simple to migrate from my MacBook.
    I have a time machine back-up so I decided to migrate using that. Everything seemed to instal pretty well with the exception of mail.  To begin with I had 2 mail icons, then I started to read some forums and checked that i had the one I wanted in the applications folder, deleted the other and then downloaded the new operating system.  Mail had to be force quit first and even when the download was complete Mail still wouldn't open or run. The only thing I can do is compose a new message, but I can't see my inbox at all.
    It's really frustrating and I would love to know in a simple step by step guide how to get mail up and running with my existing migrated emails in it.
    If anyone can give me some advice that would be great.
    thanks in advance.
    H

    Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
    First, empty the Trash.
    Triple-click the line below to select it, then copy the selected text to the Clipboard (command-C):
    find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 -o -acl \) 2> /dev/null | wc -l
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    The output of this command, on a line directly below what you entered, will be a number such as "41." Please post it in a reply.

  • HT204655 How to have a unified Photos Library after migrated from iPhoto and Aperture?

    The "HT204655: Get started with Photos for OS X" do not help. If you have previously used iPhoto and Aperture, when you "migrate" the iPhoto, then follow the steps to "migrate" the Aperture library, you end up with 5 files in your Pictures folder: Photos Library (from iPhoto), Photos Library 2(from Aperture), iPhoto Library (Not sure if can be deleted or not - of course no), Aperture Library (for some reason blank), Aperture Library 2 (Created by Photos?).
    So, looks like a mess and no easy way to make a clean migration.
    I've a hope that exists a solution to have a single Photos Library with the merged iPhoto and Aperture contents, like a real migration.
    If I export everything (From iPhoto and Aperture) then import in the Photos in a single Library should work, but will lose all the organization, faces, etc...

    You could merge libraries with iPhoto Library Manager, but I never tried this for merging Aperture 3 libraries with iPhoto 8.
    Are you planning to keep all your photos in iCloud? Then consider to merge them in iCloud, but it will take a long time.
    Are you using iCloud Photo Library (Beta) and have enough iCloud storage for the merged library?
    Wait, till your current Photos Library has been completely uploaded to iCloud.
    Then quit Photos, and launch it again, while holding down the alt/options key. Select the old iPhoto lIbrary.
    When the upgrade of the old library has been finished, make this library the System Photos library (in the Photos Preferences > General).
    Enable again iCloud Photo Library (Beta) in the Photos > iCloud preferences.
    Now Photos will upload the new library to iCloud as well and create a merged library in iCloud. After this merged library synced with your Mac, you will have a merged Photos library.

  • Migration from 2007 and Archive Mailbox PST import question

    Our enterprise will be migrating from Exchange 2007 SP3 to Exchange 2013 CU3 very shortly. Exchange 2013 is set up and I am in coexistance mode currently. Everything is working fine with the legacy redirection, I have tested some mailbox migrations and they
    work fine. We currently use Mimosa Nearpoint as a third party email archive product.
    As part of this migration from 2007 to 2013, we plan on moving away from Mimosa Nearpoint and utilizing the Exchange 2013 Archive Mailbox feature. We will give each user an Archive Mailbox. We have the ability to export the users existing archive out of
    NearPoint to .PST files and then migrating them directly into the users Archive Mailbox using the "New-MailboxImportRequest -IsArchive" powershell commandlet. This has been tested and works fine with one very important exception.
    When I export from Nearpoint, I have to export the entire contents of the archive, I cannot set date ranges. So when I do an export, it also contains the contents of the user's mailbox. I have managed folder policies in place in the Exchange 2007 environment
    which delete all contents of the mailbox older than 60 days, but when I import the .PST to the archive, it imports ALL items into the Archive Mailbox. So I have 60 days worth duplication of items.
    It is my understanding that if I imported the Archive .PST directly into the users production mailbox in the 2013 side, that it would not import duplicate items. I am trying to find out if there is any process which will do the same thing with me importing
    directly into the users Archive Mailbox.
    Thanks you,

    Hi,
    We used a third patry email archive product to export to .pst files, so it is too hard to say that whether it cause this issue.
    However, I found a method to delete the duplicate items from our mailbox via MFCMAPI Tool.
    Please make sure that the Exchange Server mailbox has been backed up first.
    Details in the following KB:
    How to remove duplicate folders in Outlook when connected to an Exchange Server mailbox
    http://support.microsoft.com/kb/2509983
    I also found a script to remove duplicate items.
    This script will scan each folder of a given mailbox and removes duplicate items from those folders. You can specify how the items should be deleted and what items to process, e.g. mail items or appointments. Sample usage is after a misbehaving synchronization
    tool creates duplicate items or (accidental) import of PST file with duplicate items.
    *****Please also make a full back up first*****
    Removing Duplicate Items from a Mailbox
    http://gallery.technet.microsoft.com/office/Removing-Duplicate-Items-f706e1cc#content
    Disclaimer       
    The sample scripts are not supported under any Microsoft standard support program or service.
    The sample scripts are provided AS IS without warranty of any kind. Microsoft further disclaims all implied warranties including, without limitation, any implied warranties of merchantability or of fitness for a particular purpose.
    The entire risk arising out of the use or performance of the sample scripts and documentation remains with you.
    In no event shall Microsoft, its authors, or anyone else involved in the creation, production, or delivery of the scripts be liable for any damages whatsoever (including, without limitation, damages for loss of business profits, business interruption, loss
    of business information, or other pecuniary loss) arising out of the use of or inability to use the sample scripts or documentation, even if Microsoft has been advised of the possibility of such damages.
    Hope it is helpful
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • SAP Database Migration from Oracle to DB2

    Hi All,
    Our client has decided to move the SAP database from Oracle 10.0.2 to IBM DB2. We will like to know list of activities which are required to be done from application side to support this.
    Also we want to know on how to find the report / interfaces where the code is written in native SQL (PL SQL) and not in open SQL (ABAP).
    Any pointers in this regard will be useful. Thanks.
    Best Regards,
    Vithal

    > Our client has decided to move the SAP database from Oracle 10.0.2 to IBM DB2. We will like to know list of activities which are required to be done from application side to support this.
    http://service.sap.com/osdbmigration
    > Also we want to know on how to find the report / interfaces where the code is written in native SQL (PL SQL) and not in open SQL (ABAP).
    I don't think there's an easy way to find that out.
    Markus

  • Migrating from Entourage and now can't send mail except from  Mac account

    I've just started using Mail after using Entourage for many years and I must say it's been a frustrating start (having separate applications for Mail, Address Book and Calendar is a pita so far). But most importantly I can't get Mail to allow me to send mail from any account other than from my .Mac account (no problems receiving mail). I'm using the same outgoing server settings as in Entourage but no joy - I get an error message saying it can't use the outgoing server. I have no problems with this in Entourage. For example, from Entourage I can send mail using my BT Internet account or my Bulldog Home account using the following outgoing mail server settings:
    SMTP SERVER: mail.bulldoghome.com
    ACCOUNT ID: [email protected]
    PASSWORD: my email password
    Also, how do I access my hotmail?

    Ok here's another one. When I delete a mail retrieved from a non Mac mail account (eg my BT Internet account) and empty my Trash in Mail it does not delete the email off the (BT Internet) server. I have not checked "remove copy from server after retrieving a message" so that I can access the email from multiple locations. But when I do delete it I obviously want it removed from the server.

  • MPLS migration from IPv4 and IPv6

                       Hello,
    i have existing MPLS VPN setup using IPv4 between all devices (P,PE,CPE), i want to start to migrate to IPv6 but i want to start the migration for one link between P and PE and all other devices will be the same (IPv4). Can you please tell me how i can acheive this scenario without impcat the services because is life.
    Thanks

    Dear All,
    when i configured IPv6 between PE and CPE the neighbor between them is idle the following the configuration between PE and CPE:
    PE:
    router bgp 100
    bgp router-id 10.200.200.3
    no bgp default ipv4-unicast
    bgp log-neighbor-changes
    neighbor MPLS-Group peer-group
    neighbor MPLS-Group remote-as 100
    neighbor MPLS-Group update-source Loopback0
    neighbor MPLS-Group-IPV6 peer-group
    neighbor MPLS-Group-IPV6 remote-as 100
    neighbor MPLS-Group-IPV6 update-source Loopback0
    neighbor 10.200.200.5 peer-group MPLS-Group
    neighbor 2002:10:200:200::5 peer-group MPLS-Group-IPV6
    address-family ipv4
      no synchronization
      no auto-summary
    exit-address-family
    address-family vpnv4
      neighbor MPLS-Group send-community both
      neighbor MPLS-Group next-hop-self
      neighbor 10.200.200.5 activate
    exit-address-family
    address-family vpnv6
      neighbor MPLS-Group-IPV6 send-community both
      neighbor MPLS-Group-IPV6 next-hop-self
      neighbor 2002:10:200:200::5 activate
    exit-address-family
    address-family ipv4 vrf TEST
      no synchronization
      redistribute connected
      neighbor 10.225.0.2 remote-as 101
      neighbor 10.225.0.2 activate
    exit-address-family
    address-family ipv6 vrf TEST
      redistribute connected
      no synchronization
      neighbor 2002:10:225::2 remote-as 101
      neighbor 2002:10:225::2 activate
    exit-address-family
    ipv6 router ospf 200
    router-id 10.200.200.3
    log-adjacency-changes
    mpls ldp router-id Loopback0
    CPE:
    interface Loopback0
    ip address 10.225.100.1 255.255.255.255
    ipv6 address 2002:10:225:100::1/128
    interface FastEthernet0/0
    no ip address
    shutdown
    duplex half
    interface GigabitEthernet1/0
    ip address 10.225.0.2 255.255.255.252
    negotiation auto
    ipv6 address 2002:10:225::2/126
    router bgp 101
    no synchronization
    bgp router-id 10.225.100.1
    bgp log-neighbor-changes
    network 10.225.100.1 mask 255.255.255.255
    neighbor 10.225.0.1 remote-as 100
    neighbor 2002:10:225::1 remote-as 100
    no auto-summary
    address-family ipv6
      no synchronization
      network 2002:10:225:100::1/128
      neighbor 2002:10:225::1 activate
    exit-address-family
    CPE-1#show ip bgp summary
    BGP router identifier 10.225.100.1, local AS number 101
    BGP table version is 4, main routing table version 4
    2 network entries using 242 bytes of memory
    2 path entries using 104 bytes of memory
    3/2 BGP path/bestpath attribute entries using 228 bytes of memory
    1 BGP AS-PATH entries using 24 bytes of memory
    0 BGP route-map cache entries using 0 bytes of memory
    0 BGP filter-list cache entries using 0 bytes of memory
    BGP using 598 total bytes of memory
    BGP activity 4/0 prefixes, 4/0 paths, scan interval 60 secs
    Neighbor        V    AS MsgRcvd MsgSent   TblVer  InQ OutQ Up/Down  State/PfxRcd
    10.225.0.1      4   100       6       5        4    0    0 00:01:50        1
    2002:10:225::1  4   100       0       0        0    0    0 never    Idle
    and i received this error:
    *Nov 24 15:40:17.715: %BGP-5-ADJCHANGE: neighbor 2002:10:225::2 vpn TEST                                                                                        Up
    *Nov 24 15:40:19.079: %BGP-5-ADJCHANGE: neighbor 10.225.0.2 vpn vrf TEST Up
    *Nov 24 15:40:23.067: %BGP-3-NOTIFICATION: sent to neighbor 2002:10:225::2 passi                                                                                        ve 2/8 (no supported AFI/SAFI) 3 bytes 000101
    Thanks

  • Regarding Migration from Testing to Development

    Hi All,
    I am going to migrate from Windows 32-bit to unix 64 bit. I am using hyperion 9.3.1. I dont know, how to migrate from windows 32 bit to unix 64 bit.
    I want to migrate Planning, Essbase and Shared Services. This is the first time, i am doing the migration. Please guide me in this situation. Its very urgent for me.
    My Doubts
    1) What are the files(In planning, essbase and shared Services) i have to copy for the migration?
    2) What are the steps, i have to follow during the migration?
    Please guide me in this situation. If u have any documents for migration, please share with me. This is my mail id : [email protected]
    Thanks,
    Lakshmi

    Hi,
    I am doing the migration for Planning. I am following the below stepts for migration. I am stuck in the middle.
    The below are some steps to use in Migrating .
    1. Create a new database on Production RDBMS Server for your planning application.
    I created a new database (MIGRDB)
    2. Configure a data source on Production Planning Server.
    I configured the datasource
    3. Create fresh planning application on Production Server and Ensure the admin is the same as your planning application on Development Server.
    I created the new planning application in developement server
    4. Go into the database tables for the planning app on Production Server and look at table HSP_USERS; store the SID value against user 50001.
    How to find the SID for the new database? Here i want to replace the 50001 with new database sid value(step 1 - MIGRDB)
    Please guide me in this situation.
    Thanks,
    Lakshmi

  • Migration from sql-server 7.0 to oracle 8i

    Hai,
    I have one huge database in sql-server 7.0.
    That database has chienese,arabic and korean data. And i have created one database in oracle 8.1.6 with character set UTF8.
    By using migration work bench i couldn't transfer sql-server data into oracle 8.1.6 database which has character set utf8.
    But i have managed to transfer sql-server 7.0 to oracle 8.1.6 database which has us7ascii character set.
    Please give me the steps to transfer from sql-server 7.0 to oracle 8.1.6 database which has the character set utf8.
    I need it very very urgetnt.
    Best Regards,
    Sudhir.

    I understand that it would not be in the best interests of Oracle, monetarily that is (at least in the visible/tangible sense), to develop such a migration tool, but since the competition hasn't, why shouldn't you? I'm sure Prabha's not the first to inquire of such a thing, and I'm sure I'd have asked a similar question if I wasn't responding to you in this way. We all know Oracle is the better db - That's why we're here talking about it - but not everyone we do business with understands that, so establishing a two way street is the best way, short of requiring it of our clients, to turn them on to Oracle. I don't really think developing such a thing would hurt your business (unless MS can keep you from doing it). If your product is that much better (which we agree is true), you shouldn't be afraid of the competition. As for being afraid of proprietary constraints, I can't blame you, because I don't know how much it constrains you.
    -Val
    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by The Oracle Migration Workbench Team:
    Hi Prabha,
    My first reaction to your question would be "why would anyone want to migrate FROM Oracle and TO SQLServer ?". Oracle is easily the better database !
    ...but no, I don't really think it would be in Oracle's best interests to produce a migration tool that moved users to a propritory Microsoft product/platform..<HR></BLOCKQUOTE>
    null

  • Migration from SQL Server 7 to Oracle 8i

    I am new to Oracle, is there a way to migrate all tables and store procedure form SQL Server 7 to the oracle database
    thanks;
    null

    I understand that it would not be in the best interests of Oracle, monetarily that is (at least in the visible/tangible sense), to develop such a migration tool, but since the competition hasn't, why shouldn't you? I'm sure Prabha's not the first to inquire of such a thing, and I'm sure I'd have asked a similar question if I wasn't responding to you in this way. We all know Oracle is the better db - That's why we're here talking about it - but not everyone we do business with understands that, so establishing a two way street is the best way, short of requiring it of our clients, to turn them on to Oracle. I don't really think developing such a thing would hurt your business (unless MS can keep you from doing it). If your product is that much better (which we agree is true), you shouldn't be afraid of the competition. As for being afraid of proprietary constraints, I can't blame you, because I don't know how much it constrains you.
    -Val
    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by The Oracle Migration Workbench Team:
    Hi Prabha,
    My first reaction to your question would be "why would anyone want to migrate FROM Oracle and TO SQLServer ?". Oracle is easily the better database !
    ...but no, I don't really think it would be in Oracle's best interests to produce a migration tool that moved users to a propritory Microsoft product/platform..<HR></BLOCKQUOTE>
    null

  • Migrating from OAS to iAS9

    Hi!
    I'm looking for documents about migrating from OAS 4.0.8.1 (Linux & HP-UX) to iAS9. The document i have found on OTN don't tells me much about how to migrate from JServlet and PL/SQL.
    My main questions are:
    - how do i migrate my Servlet, which uses many Oracle spezific classes (icx etc.). Are these Classes supported in iAS?
    - how i call PL/SQL-Skripts from Servlets now? Is ICX supported?
    - can i use my PL/SQL scripts without modifications? I'm using only htp.print
    Che
    null

    a) ICX is not supported from Java. However, ICX is just http library - kind of like java.net.url. So, you should be able to do everything that ICX provided using java.net packages. If not, pl. submit a followup and we can discuss.
    b) The way you would call a PLSQL procedure is you would just submit a request thru java.net.url package. The target url of this request would be one that maps to the plsql procedure. You will thus have the response back in a string.
    c) You can use your plsql scripts without modifications [at least for what you are doing. there are some minor changes, but they don't impact you.]
    The other thing to note is that you cannot runa standalone sql file like you could in OAS. It has to be in the database.
    null

  • Proxy User (Migrating from edirectory)

    Hi Guys,
    I am sure this question has already come up somewhere in the past but i couldn't find it anywhere. all i am looking for is for someone to guide me to right direction on "Proxy Users for Active Directory". we are migrating from novell and we have
    number of
    proxy users with special/minimum rights to perform specific tasks. In this case all i want to create is a proxy user with the following rights:- 
    Enter/Object Rights - Browse
    CN - Read,Compare
    ObjectClass - Read,Compare
    Guys, any sort of help would be much appreciated. 
    Thanks in advance
    -mEtho

    Hi,
    I am not sure what do you want to achieve, the proxy users you mentioned, are they proxy objects in this article below?
    Understanding Proxy Authentication in AD LDS
    http://technet.microsoft.com/en-us/magazine/2008.12.proxy.aspx
    Best Regards,
    Amy Wang

Maybe you are looking for