CRM - MSA - Authorization Management Tool

Hi All,
I have an issue with the AMT, I did the following steps.
1. Protected the Business Object
1. Created a token for BOOPPORTUNITY.
2. Assigned the token to a role.
3. Assigned myself to the role.
4. The BOOPPORTUNITY still did not work for me.
5. Ran ConnTrans.
6. I removed myself from the role.
7. Deleted token assign to role.
8. Deleted role.
9.When I check to verify the token/role were removed. The token was still in the     assigned field. But the role is gone.
10. Now it say, Can not delete token after it was assigned to a role.
11. These changes have went to the CRM Server.
Any ideas on how I can removed that token, from the role that does not exist?
Any feedback will be greatly appreciated, I need a response asap.

I know there's been a while since you post your issue, but, do you find any solution to your problem? I'm having the same.
Thanks in advance!

Similar Messages

  • CRM - Authorization Management Tool

    Hi All,
    I am new to CRM-MS-AMT can someone tell, if  Protected Business Objects area is the only place business object should be available on the Authorization Management Tool?  Because right now I only have 80 protected business objects should their be more available?  Any information you provide pertaining to AMT- Business Objects would be greatly appreciated.

    Hi Jeanell,
    About 80 should be correct.
    You should refer to the following link form the SAP Online help. For this tool it is quite good.

  • Authorization Management Tool (AMT) - SAP Library

    To add a comment, please log in or register on the top of this page and choose Reply. Please write your comment in English.
    You can also go back to the SAP help page.

    For more info on this tool you can refer to SAP SCN Wiki at link....
    Authorization Management Tool - CRM - SCN Wiki

  • Authorization Management Tool

    I am planning to give access rights for the mobile client users using Authorization Management Tool.
    I have a site id assinged and i am working in that site id.
    I have defined a role gave the access permissions to the role.
    Now i want to assign the role to the users .
    But i could not see other users except my user id and so i cant assign the role to the users.
    Is there any way that we can see al the other users in my site or is there any other way to define roles to the mobile client users.

    Hi Andrew,
    You are right .
    I assigned the Users (by Employee) subscriptions to my site.
    Even then I am not able to see other users.
    I am only seeing my user id.
    Do i need to download any customizing objects after i assigned the subscriptions or DO i need to do anything else.
    I ran the ConnTrans after assigning the subscriptions.
    Message was edited by: zack taylor

  • Use of Tokens in Authorization Management Tool

    In Mobile Sales (5.0), I'm trying to restrict users from changing data of BP's with an specific Account Group. This means, the sales rep should have only read-access to BP's with Account Group = "001", but read, write and modify access to BP's with the rest of values of Account Group.
    For this, I have protected object BOKNA1, defined rule for field KTOKD, created a token with this rule and variable rule. Then, I have created a new role and assigned the token to this role, with value for the variable="001".
    My question is: do I have to give UI Rights to this role,  or do I have to create another Role with rights to the MSA, and then assign both roles to the user?

    Thank you Wolfhard,
    I have tried two solutions:
    First solution:
    - Create a single role
    - Give UIRights to this role, to read-modify- create (at tile level)
    - For the same role, assign two tokens (with read only for one case, and read and modify for the other case).
    When I do this, I can read, modify and create for all BP.
    Second solution:
    - Create a single role
    - Give UIRights to this role, to read (at tile level)
    - For the same role, assign two tokens (with read only for one case, and read and modify for the other case).
    When I do this, I can only read, for all the BP's
    Thus, it seems that tokens are not being taken into account, but only the UI Rights-
    Any ideas would be welcomed!
    Thanks again

  • Predefined Roles Missing in Authorization Management Tool

    Hi Guys,
    The Predefined roles
    are missing when I logged in to AMT.
    I checked the SAP notes and found the note 657434.
    It asked me to run the report INSERT_ADDITIONAL_AMT_ROLES_40.
    I ran the report in the CRM system using transaction se38.
    and ran the ConnTrans
    But even then the roles are not visible in the AMT.
    Did I miss any other Steps.

    Hello Zack,
    Did you make a manual extract of the subscriptions for the site?
    Are some messages coming to the mobile?
    If not, try to regenerate the replication object/publication with transaction SMOGGEN and make an extract again.

  • Creation of MSA Sandbox for migation from CRM MSA 40 to CRM MSA 70

    Hello community,
    We are planing an upgrade from CRM MSA CP  4.0 SP 08 to CRM MSA CP 7.0.
    As we know that one of the biggest issues is the code migration, we want to setup a sandbox system.
    The idea is to install a repository server and a MDW in 7.0, then put the 4.0 repository backup to the 7.0 repository server and
    start the CMT (code migration tool). We have installed the landscape already, but if we want to install the CMT wer ge the message, that the MDW ist not installed on the machine.
    The question that we have , is our plan ok, or do we need to install a 4.0 repoitory server and make the update of the repository server later on ?
    As i cannot find a proper description for the steps i want to ask you, what steps are correct ?
    If anyone made some experience already, it would be great if you could share them.
    Thank you very much

    You are mistaken. CMT should be run only from 4.0 MDW machine, this tool can not be run from 7.0 MDW machine.
    Please refer to the note 1087949 for the issue mentioned.

  • BPC User Management Tools in different versions

    Hi all,
    I am comparing the different versions of BPC from 5.1 to 10.0 and I have the following questions about user management tools:
    How does "User Management Server" work?
    What's the difference when it is compared with "Active Directory" and "BPC NW Authorization"?
    I have summarized my understand on the availability of the user management tools in different versions of BPC but I don't know if it is correct.
    Active Directory
    Central Management Server
    BPC NW Authorization
    NetWeaver version
    BPC 7.X, 10.0
    BPC 7.X, 10.0
    Microsoft version
    BPC 5.1, 7.X, 10.0
    BPC 7.X, 10.0
    BPC 7.X, 10.0
    Please kindly correct me if I am wrong.
    Thanks in advance!

    Hi Winson,
    You are incorrect for BPC NW 7.5 - it uses Active Directory users...

  • RE: [REQ] Assisted management tools/methods for planshierarchies(imp/ex

    Hi William, and all forté subscribers.
    Thanks for your answers.
    To discuss on honest basis, let's say we don't plan to buy any product yet.
    But the 'small' forté code management is source of many problems.
    We're interfacing the 'workspaces handling' with text-based source control
    tools, and this (can) allows proper 'control'. Shame we can't build forté
    applications from proper text files :)
    Our issues are more about understanding the hierarchy between projects when
    it's not documented. Therefore, quite a reverse-engineering point of view,
    despite we stay in a " forte TOOL code " level.
    For your information, we have Select, used as " reference " model, and as
    interface to Express.
    For the Issues I've expressed, here's my (current) status.
    I learned 'b-tree' repositories have become standard for 3.0 (despite 2.0 had many),
    and therefore we're extremely waiting for 'R.4.0' code management.
    We've got a way to " visualize " plans depandancies from an exported workspace,
    but this doesn't allow 'update' (lacks forté workspace cross-verification facility).
    We've got another way to export a 'workspace' in both 'wex' and set of 'pex's,
    and building the import script from the wex file using an intelligent grep/sed script.
    Thanks for all your suggestions,
    Integration Engineer
    De: William Poon[SMTP:[email protected]]
    Date d'envoi: vendredi 10 juillet 1998 16:58
    A: 'Jean-Paul GABRIELLI'
    Cc: John Apps; Forte -- Development
    Objet: RE: [REQ] Assisted management tools/methods for plans hierarchies(imp/exports, supplier plans management & external APIs control)
    Hi Jean-Paul,
    One of our consultants has forwarded your message to me. I am
    extremely interested in learning more about your requirement. I am the
    lead engineer in the Compaq-Digital enterprise organization building
    component based development tools. Following are some of my thoughts as
    well as questions.
    William Poon, Compaq-Digital
    -----Original Message-----
    From: John Apps
    Sent: Friday, July 03, 1998 6:40 AM
    To: Forte -- Development
    Subject: FW: [REQ] Assisted management
    tools/methods for plans hierarchies (imp/exports, supplier plans
    management & external APIs control)
    From the Forte-Users newslist: I think this person is
    looking for CBD tools?! Perhaps William has an answer out of his
    From: Jean-Paul
    GABRIELLI[SMTP:[email protected]]
    Reply To: Jean-Paul GABRIELLI
    Sent: Friday, July 03, 1998 11:28
    To: '00 Forte Mailinglist'
    Subject: [REQ] Assisted management tools/methods
    for plans hierarchies (imp/exports, supplier plans management & external
    APIs control)
    I'm looking for cross-projects investigation tools, to
    provide graphical understanding and management of
    forté source code. Viewing/updating plans dependencies,
    as well as managing external APIs calls are my
    I am not clear about this question. But I will give my best shot. Are
    you looking for some form of "source profiling" or "reverse engineering"
    tool where by it reads the Forte TOOL code and turn that into UML which
    then can be displayed in graphical form. My understanding is that
    SELECT's Enterprise has this capability for C/C++ code. They also work
    closely with Forte so they might have something that will work with TOOL
    In order to manage international developments between
    sites, applications have been split into 'components'.
    Therefore, and to keep it simple, each component comes
    out of a separate dedicated repository.
    At integration and build time, those sets of source code
    are merged together, supplier plans updated and
    forté applications built.
    Controlling UUIDs at export time keeps simple the reload
    of new delivered versions.
    But my issue is in the physical process to actually
    (get) deliver(ed) those sets of source code.
    Forté fscript allows to export classes, plans, or
    Only 'plan exports' (pex) can provide a way to only
    deliver plans which have to be delivered.
    (i.e. without test projects, stubs or third party
    products plans which could be part of the workspace).
    Therefore, whereas an export script can easily be
    automated (list plans, and then for each plan find it
    and then export it with a meaningful name), the import
    process can't, because of plans dependancies.
    In order to assist that process, I would like to know if
    any of you did find ways to :
    1) Display in a tree view the plans hierarchy for a given
    workspace, or for a given repository baseline
    I don't think you can do it in Forte 3.0. But my I understanding is
    that they will have this capability in Forte 4.0. But Forte people will
    have more information.
    2) Export from a given workspace plans as separate
    files, as well as related import script (with proper sequence)
    3) Get from a set of pex files a plans hierarchy and a
    proper import script.
    Current workaround has been first to 'batch load' all
    the pex files until having them all loaded
    (first go loads top providers, then more and more as
    dependancies are resolved).
    Another one has been spending time grep'ing from pex
    files the 'includes' lines and designing on paper
    the tree. But that's long and evolving.
    Thanks for ideas and suggestions,
    Integration Engineer
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:>

    Maybe Hamish Speirs can explain it - it was his post in another thread that gave me the idea and commands to try (see
    We had a confluence of changes at the beginning of the semester (Sept) that no doubt helped contribute to the problem and yet also mask the real cause to a certain extent.
    1. The Thawte cert expired and was replaced with a new cert - Thawte does not support doing renewals on NetWare. This happened around the start of Sept.
    2. School semester begins. Thousands of students return.
    3. We use Pcounter for pay-for-print and it uses httpstk to provide a webpage for students to authorize print jobs.
    4. Printing activity in general goes way up.
    5. All printers are Secure.
    6. Apache, iPrint and httpstk all use the same Thawte certificate
    7. The print server was also hosting the netstorage service which also uses the Thawte cert (via apache).
    8. The print server was recently (August) virtualized (via p2v using the excellent Portlock Storage Manager)
    Eventually I built a new NetWare vm to host print services and got a new cert so at least the netstorage and print services were no longer running together. I suspected at that point that the likely source of the abends was NetStorage since Nile and SSL were almost always involved in the abends.
    After the separation the issues continued - so it wasn't netstorage's fault. Desparate searching of the 'net lead to H.'s post. The rest is history!
    It has now been 9 days up uptime without a single nile/ssl related abend ( I had one abend in pcounter but services survived).
    "Seasoned Greasings and Happy New Rear!"

  • Disk Utitlity has "Lost Connection" with Disk Management tool"

    [ Edited by Apple Discussions Moderator; please start a new topic about your technical issue. ]
    Running OSX10.3.8
    I installed:
    "iTunes" (6.0.2)
    "iPod Updater 2005-11-17" ((null))
    "iChat Update" (2.1)
    Went to repair disk permissions
    I get this error:
    Disk Utitlity has "Lost Connection" with Disk Management tool" Please quit Disk Utility.
    then it says quitting Disk Utility may render the disk useless. Stopping the scan just gives a "stopped by User" red text message in the DU screen.
    Had to Quit. No other way out.
    Now it will not repair "or" verify Disk permissions at all.
    What to do?
    Powermac G4 1.25ghz, OS9/OSX   Mac OS X (10.3.8)  

    Getting the same results booting off of the install CD. I even ran fsck -y after a soft boot(command S). Note I also installed the iPod updater and iChat update.
    I'm getting a crash log that has to do with DiskManagement
    Path: /System/Library/PrivateFrameworks/DiskManagement.framework/Resources/DiskManage mentTool
    I tossed the pref file for Disk utility and tried to locate a pref for the Disk Management but nada...
    Is there a prefs file that needs to be tossed?
    Anyone do a recent Onyx Maintainence cleaning?
    Is there a way to do an iTunes Uninstal and reinstall a previous version?
    Powermac G4 1.25ghz, OS9/OSX   Mac OS X (10.3.8)  
    Powermac G4 1.25ghz, OS9/OSX   Mac OS X (10.3.8)  

  • 'Disk Utility has lost connection with Disk Management Tool' w/ RAID 10 set

    Using 4 internal drives, I have specified the following setup for each:
    2 partitions, 1 'speed' of 5 GB and 1 'data' of whatever remains.
    The 4 speed partitions stripe to a single RAID volume correctly.
    The 4 data partitions are used to make a RAID 10 volume as follows:
    The first 2 data partitions are mirrored to make a 'data-A'
    The next 2 data partitions are mirrored to make a 'data-B'
    These complete correctly.
    Upon attempting to strip data-A and data-B in order to finish the RAID 10 setup, Disk Utility quits with the following message:
    "Disk Utility has lost connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility'.
    A search here and on the nets reveals only that this message appeared in 10.3.x when attempting to repair disk permissions and had to do with a rogue iTunes support file. This is occurring on a blank system (no iTunes installed) so I don't think its the same cause.
    Note that I was able to complete this setup under Tiger several times without issue, so it seems to be unique to Leopard. Does anyone know what is going on and hopefully suggest a workaround?

    To answer my own issue and leave a marker here for others, I was able to successfully set up a RAID 10 partition using diskutil, indicating that the problem is Disk Utility itself and not the RAID implementation.
    Disk Utility has proven itself to be bugridden (must restart frequently to get updated view of volumes; drops device names at various times; etc.) and this latest bug would seem to suggest that it should be avoided in favor of diskutil for any serious RAID construction.

  • Disk Utility has Lost Connection with the Disk Managment Tool

    For starters, this problem is not associated with the thread that Brian Z. has posted at the top of this forum. Having said that, here's my problem:
    I had installed Security Update 2006-003, and Quicktime 7.1. Permissions were repaired before and after each installation, and all went well.
    Some hours later, I was experimenting with Apple Remote Desktop. I had activated ARD in the System Preferences>Sharing pane, and it provided me an IP address associated with ARD. I then turned on Airport, and ARD provided me with an IP address associated with that connection. However when I turned off my modem connection, System Preferences>Sharing hung, and had to be Force Quit.
    Console Log follows:
    ===== Mon May 15 2006 ===== 21:09:09 America/Anchorage =====
    2006-05-15 21:09:17.488 System Preferences[2732] Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    2006-05-15 21:09:28.224 System Preferences[2732] ### Error:268435460 File:FileSharing.m Line:308
    2006-05-15 21:09:38.230 System Preferences[2732] ### Error:268435460 File:FileSharing.m Line:343
    2006-05-15 21:09:48.415 System Preferences[2732] ### Error:268435460 File:FileSharing.m Line:343
    Thinking a plist had become corrupted, I trashed the following:
    System Preferences started out very slowly, but then all the panes except Sharing would work ok.
    I booted from the install disk and performed a Disk Repair. There were no problems reported.
    When I tried to run a Repair Permissions, after about 20 seconds I got the, "Disk Utility has lost connection with the disk management tool and can not continue. Please quit and relaunch Disk Utility."
    I quit D.U. and the Installer, and was able to successfully run a Repair Permissions from the D.U. in my Utilities folder. It had no problems to report.
    Continuting to troubleshoot the System Preferences problem, I then trashed the This solved my System Preferences>Sharing problem.
    However, I am still unable to perform a Repair Permissions after booting from my install disk (I get the subject message). Repairing permissions from the Disk Utility in my Utilies folder works fine.
    Any thoughts out there on a logical way to troubleshoot where my problem is? Is there a way to get a console log when I'm running DU from the install disk, or a comparable source??

    I found this crash log that was generated about the time I had problems with System Preferences hanging.
    Entitled "writeconfig.crash.log"
    Host Name: Bobs-Big-Mac.local
    Date/Time: 2006-05-15 21:08:17 -0800
    OS Version: 10.3.9 (Build 7W98)
    Report Version: 2
    Command: writeconfig
    Path: /System/Library/PrivateFrameworks/Admin.framework/Resources/writeconfig
    Version: ??? (???)
    PID: 2707
    Thread: 0
    Exception: EXC_BREAKPOINT (0x0006)
    Code[0]: 0x00000001
    Code[1]: 0x90a8d2c0
    Thread 0 Crashed:
    0 0x90a8d2c0 _NSRaiseError + 0xf8
    1 0x90a349d8 -[NSConnection sendInvocation:] + 0x6a4
    2 0x90a2d8e0 -[NSObject(NSForwardInvocation) forward::] + 0x198
    3 libobjc.A.dylib 0x90866810 objcmsgForward + 0xb0
    4 writeconfig 0x0000baac 0x1000 + 0xaaac
    5 writeconfig 0x0000ec84 0x1000 + 0xdc84
    6 writeconfig 0x0000ad88 0x1000 + 0x9d88
    7 writeconfig 0x0000abfc 0x1000 + 0x9bfc
    PPC Thread State:
    srr0: 0x90a8d2c0 srr1: 0x0202f030 vrsave: 0x00000000
    cr: 0x24000442 xer: 0x00000000 lr: 0x90a8d298 ctr: 0x90a23528
    r0: 0x00000000 r1: 0xbffff430 r2: 0xa0a204bc r3: 0xa0a34e20
    r4: 0x9086eb88 r5: 0x20000000 r6: 0xbffff110 r7: 0x00000000
    r8: 0x00000001 r9: 0x0030d370 r10: 0x00000239 r11: 0x28000442
    r12: 0x90a23528 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000
    r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000
    r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000
    r24: 0x00310680 r25: 0xbffffcd8 r26: 0x00311c50 r27: 0xa0a2af6c
    r28: 0xa0a30e7c r29: 0xa0a24ae0 r30: 0x003109a0 r31: 0x90a8d1d0
    Binary Images Description:
    0x1000 - 0x28fff writeconfig /System/Library/PrivateFrameworks/Admin.framework/Resources/writeconfig
    0x80830000 - 0x8090efff libxml2.2.dylib /usr/lib/libxml2.2.dylib
    0x8c2bc000 - 0x8c2c5fff libBSDPClient.A.dylib /usr/lib/libBSDPClient.A.dylib
    0x8fe00000 - 0x8fe4ffff dyld /usr/lib/dyld
    0x90000000 - 0x9014ffff libSystem.B.dylib /usr/lib/libSystem.B.dylib
    0x901c0000 - 0x9026efff 6.3.9 (299.37) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
    0x902b0000 - 0x90529fff 10.3.7 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
    0x905a0000 - 0x90610fff 1.3.6 (???) /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
    0x90640000 - 0x906c8fff 3.0.1 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
    0x90733000 - 0x90740fff 1.2.1 (1.0) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels. framework/Versions/A/CommonPanels
    0x90810000 - 0x90810fff 1.0 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
    0x90860000 - 0x908cffff libobjc.A.dylib /usr/lib/libobjc.A.dylib
    0x908f5000 - 0x90912fff 3.9 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CarbonSound.f ramework/Versions/A/CarbonSound
    0x90940000 - 0x909b3fff 1.2.5 /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Desk topServicesPriv
    0x90a20000 - 0x90b7bfff 6.3.8 (500.61) /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
    0x90d40000 - 0x90d40fff 10.3 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
    0x90d50000 - 0x90d6bfff 1.7.1 (???) /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
    0x90d7c000 - 0x90d8cfff 3.3 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecogni tion.framework/Versions/A/SpeechRecognition
    0x90dd0000 - 0x90df0fff 1.7.2 /System/Library/Frameworks/DirectoryService.framework/Versions/A/DirectoryServi ce
    0x90e10000 - 0x90e11fff 10.2.3 /System/Library/PrivateFrameworks/ServerControl.framework/Versions/A/ServerCont rol
    0x90e13000 - 0x90e4bfff 10.3.5 (98.4) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LaunchServices.framework/Versions/A/LaunchServices
    0x90e60000 - 0x90e66fff 10.2.3 /System/Library/PrivateFrameworks/ServerPrefs.framework/Versions/A/ServerPrefs
    0x90e80000 - 0x90e9ffff 2.6 (232.3) /System/Library/PrivateFrameworks/MediaKit.framework/Versions/A/MediaKit
    0x90ec0000 - 0x90ec0fff 6.3 (???) /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
    0x9102d000 - 0x91047fff 1.2.1 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting .framework/Versions/A/OpenScripting
    0x910c0000 - 0x910c1fff 2.0.1 /System/Library/PrivateFrameworks/AFPDefines.framework/Versions/A/AFPDefines
    0x910e0000 - 0x91134fff 1.2.7 (64.1) /System/Library/PrivateFrameworks/Bom.framework/Versions/A/Bom
    0x91141000 - 0x91141fff 10.3 (???) /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
    0x91230000 - 0x9123afff 1.3.3 /System/Library/PrivateFrameworks/MachineSettings.framework/Versions/A/MachineS ettings
    0x91242000 - 0x9124cfff 1.2.0 (???) /System/Library/Frameworks/AppleTalk.framework/Versions/A/AppleTalk
    0x91251000 - 0x9125afff 2.0.5 /System/Library/PrivateFrameworks/DiskArbitration.framework/Versions/A/DiskArbi tration
    0x912e0000 - 0x912f7fff 1.5.4 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LangAnalysis.framework/Versions/A/LangAnalysis
    0x91303000 - 0x91370fff libvDSP.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/ amework/Versions/A/libvDSP.dylib
    0x913a0000 - 0x9145ffff ColorSync /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ColorSync.framework/Versions/A/ColorSync
    0x915e0000 - 0x91699fff 3.4.71 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ QD.framework/Versions/A/QD
    0x916f0000 - 0x91728fff 1.4 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ AE.framework/Versions/A/AE
    0x91760000 - 0x917f3fff 3.3 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/PrintCore
    0x9194f000 - 0x9194ffff 1.3.3 /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
    0x91970000 - 0x919befff 3.3 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Print
    0x91a40000 - 0x91ab3fff 3.3.3 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/NavigationSer vices.framework/Versions/A/NavigationServices
    0x91afb000 - 0x91b0bfff 2.1.5 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/ImageCapture. framework/Versions/A/ImageCapture
    0x91b30000 - 0x91b44fff libCGATS.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCGATS.A.dylib
    0x91b60000 - 0x91b6bfff libCSync.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCSync.A.dylib
    0x91ba3000 - 0x91bbdfff libresolv.9.dylib /usr/lib/libresolv.9.dylib
    0x91bd0000 - 0x91bdffff libPSRIP.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libPSRIP.A.dylib
    0x91c00000 - 0x91c13fff libRIP.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libRIP.A.dylib
    0x92037000 - 0x92052fff libcurl.2.dylib /usr/lib/libcurl.2.dylib
    0x92070000 - 0x92096fff 1.4 (1.2) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ FindByContent.framework/Versions/A/FindByContent
    0x92170000 - 0x92357fff 2.4 (179) /System/Library/Frameworks/Security.framework/Versions/A/Security
    0x927f0000 - 0x92827fff 1.2.2 (7) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwo rk.framework/Versions/A/CFNetwork
    0x9283f000 - 0x92857fff 1.1.1 (1.1.0) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/WebServ icesCore.framework/Versions/A/WebServicesCore
    0x92880000 - 0x92c05fff 1.3.7 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox
    0x92de0000 - 0x92e30fff 1.4.1 (0.0.1d1) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ HIServices.framework/Versions/A/HIServices
    0x92e70000 - 0x9336ffff 6.3.10 (743.42) /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
    0x93680000 - 0x93958fff 1.203.30 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics
    0x939d0000 - 0x939d4fff libmathCommon.A.dylib /usr/lib/system/libmathCommon.A.dylib
    0x93a50000 - 0x93a64fff libcups.2.dylib /usr/lib/libcups.2.dylib
    0x93a6a000 - 0x93a84fff libPDFRIP.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libPDFRIP.A.dylib
    0x93bec000 - 0x93ca4fff 1.3.4 /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
    0x94270000 - 0x94333fff 10.3.8 (77) /System/Library/PrivateFrameworks/DiskImages.framework/Versions/A/DiskImages
    0x94580000 - 0x9458bfff 1.2 (90) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/ amework/Versions/A/SecurityHI
    0x94593000 - 0x9459ffff 1.0.1 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Help.framewor k/Versions/A/Help
    0x945b0000 - 0x945b9fff libz.1.dylib /usr/lib/libz.1.dylib
    0x94650000 - 0x946affff 1.0.2 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
    0x94720000 - 0x94721fff 1.0 (6) /System/Library/Frameworks/SecurityFoundation.framework/Versions/A/SecurityFoun dation
    0x94800000 - 0x9488cfff 101.1.4 (55.12) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework /Versions/A/Ink
    0x94e0b000 - 0x94e1efff 3.2 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ SpeechSynthesis.framework/Versions/A/SpeechSynthesis
    0x95140000 - 0x951b5fff 2.1.17 /System/Library/Frameworks/DiscRecording.framework/Versions/A/Frameworks/DiscRe cordingEngine.framework/Versions/A/DiscRecordingEngine
    0x954c0000 - 0x95ac6fff libBLAS.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/ amework/Versions/A/libBLAS.dylib
    0x95b20000 - 0x95df0fff libLAPACK.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/ amework/Versions/A/libLAPACK.dylib
    0x95f00000 - 0x95f20fff libvMisc.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/ amework/Versions/A/libvMisc.dylib
    0x96028000 - 0x960f0fff libcrypto.0.9.7.dylib /usr/lib/libcrypto.0.9.7.dylib
    0x968d0000 - 0x969b2fff libicucore.A.dylib /usr/lib/libicucore.A.dylib
    0x96a04000 - 0x96a6dfff 1.1.2 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HTMLRendering .framework/Versions/A/HTMLRendering
    0x96aa0000 - 0x96acefff libssl.0.9.7.dylib /usr/lib/libssl.0.9.7.dylib
    0x96b50000 - 0x96bdffff ATS /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/ATS
    0x96c00000 - 0x96c67fff 2.1.3 /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
    0x96cb0000 - 0x96d9efff libiconv.2.dylib /usr/lib/libiconv.2.dylib
    0x96de0000 - 0x96df0fff 3.0.3 (vecLib 3.0.3) /System/Library/Frameworks/vecLib.framework/Versions/A/vecLib
    0x96ee0000 - 0x96ee8fff libbsm.dylib /usr/lib/libbsm.dylib

  • Unable to add File Server Resource Manager Tools on Windows Server 2012 - Errors on restart and roll back install

    Unable to install Windows Server 2012 Feature -  [Tools] File Server Resource Manager Tools.
    Installs, however when I restart the server error messages appears saying feature unable to install, windows reverting changes.
    In the Setup event logs have the following information message "Update FSRM-Infrastructure of package FSRM-All failed to be turned on. Status: 0x800f0922"
    Does anyone have any idea's on why this Feature can not be installed ??

    Hi Shaun
    Tried both of your suggestions, however neither strategy worked.
    Strategy 1
    Tried installing via powershell - "install-windowsfeature -name fs-resource-manager -includemanagementtools"   
    Feature un-installed itself during the restart.
    Attempted to use the command "DISM /online /remove-feature /featurename:FSRM-Infrastructure-Services".  However
    this did work because one the Service was'nt installed or two because there was no command option for "/remove-feature"
      /Add-Package            - Adds packages to the image.
      /Remove-Package         - Removes packages from the image.
      /Enable-Feature         - Enables a specific feature in the image.
      /Disable-Feature        - Disables a specific feature in the image.
      /Get-Packages           - Displays information about all packages in the image.
      /Get-PackageInfo        - Displays information about a specific package.
      /Get-Features           - Displays information about all features in a package.
      /Get-FeatureInfo        - Displays information about a specific feature.
      /Cleanup-Image          - Performs cleanup and recovery operations on the image.
    Strategy 2
    Tried installing via powershell, using the following command DISM
    /online /enable-feature /featurename:FSRM-Infrastructure-Services, however got the same result, the install backed out during the restart.
    All up back to where I started?

  • As an asset management tool it should manage all images but only adjust raw

    Is Aperture an image management tool, raw converter/workflow tool, or both?
    Let it be both! Restrict what is is ALLOWED to ADJUST, but manage it all.
    When I do a shoot, I start out with 300-1000 RAW images.
    By the time I am finished with the client I will have narrowed the pile of image assets down to 20% of the original RAW files, JPGs of all of those, AND 10% of the selected originals will also end up as layered PSD/TIFF files. But when I go back in and want to open a PSD file then why not allow just that Then save it back as the same or a version..
    OR when I tell it to open a PSD file in CS2 it will as "make a version(full or flat), or edit original?" and of course a "don't ask me again for this format" check box!
    So why not leave the layered PSD/TIFF files alone and NOT allow them to be adjusted, only managed?
    Think about it, IF I want to adjust my multilayered PSD file I will most definitely only trust that to CS2 where I retain full creative control over the layers, and I can output a version if I want!
    IF I am crazy enough to feel the need to use the shallow tools of Aperture to tweak the brightness/level/curves/saturation/WB/etc/etc of a flattened COPY of my layered PSD file then I will make a copy and drag it into Aperture. By shallow I mean that CS2 and layers has much more control than the single layer tools of Aperture.
    As an option leave it open as a configuration choice in the prefs... "Adjustable image formats: RAW, JPG" and even on a per image basis, right-click--> image status-->Adjustable or Unadjustable.
    Yes, I sent this idea off to Apple!

    Right there with you. Here's my rough scenario:
    1. I shoot 500 RAWs.
    2. Cull down to 100 keepers.
    3. Client culls down to their 50 selects.
    4. Anywhere from 25-50 become layered PSD files, depending on the presentation the client wants (sizes, packages, borders, special effects, etc.).
    5. In addition to those 25, there may be *completely new* composites (PSD's) created from combinations of the 25 -- this isn't a version of one of the original masters -- it is a *completely new* image that Aperture needs to manage in the project (so import of PSD without flattening and/or allowing Photoshop to Save-As into the Aperture library is a must).
    I'd even add to your request about allowing adjustments. It would be totally cool if the adjustment tools were context-sensitive, enabled when working with an image (like RAW or JPG) where Aperture can adjust, and disabled when working with an image (like layered PSD or TIFF) that it won't adjust.
    Anyway, I have complete confidence that eventually, the RAW conversion will be fixed, so even though that's an immediate glaring issue, it doesn't seem to me to be the long-term workflow killer. Being able to traverse this editing stage of the workflow with Photoshop is crucial. Without this, its basically
    a complete project export after the initial organization stage, and the rest of the workflow is either managed entirely in another tool, or a complete pain to bring back into Aperture for output, which leaves files strewn everywhere for backup and archiving.

  • Help define the requirements for an Oracle Spatial management tool

    We are developing a tool that, we hope, will be indispensable for all Oracle Spatial and Locator dbas/users. We've released version 1.0, but we need your help to define the requirements for the next version.
    What features would you like to have in a management tool for your spatial databases?
    The features we've got so far:
    1. Viewing of vector data in a map + attributes
    2. Loading from shapefiles
    3. Exporting to shapefiles
    4. Validating metadata, indexes and spatial data.
    We are adding editing of vectors in the next version - basic stuff for add, update and delete.
    But there must be a lot more. What do you find difficult to do in Oracle Spatial/Locator? What would you like in a tool such as this?
    Any feedback either to myself or the forum is much appreciated.
    [email protected]
    PS If you like to have a look at what we have done so far, go to

    Andrew knows what I have asked for but for others to think about and to start
    the ball rolling, here's what they are:
    1. Ability to enter own SQL commands but with PARAMETERS for attributes
    and shapes as in the following examples:
    SELECT ...
    FROM my_spatial_table a
    WHERE a.ATTRIBUTE = :attr
    AND MDSYS.SDO_RELATE(a.shape,:polygon,'mask=anyinteract') = 'TRUE'
    When executed the attribute value is asked for via a input box (data type?)
    and the user is asked to define the SDO_GEOMETRY for the :polgygon parameter via mouse clicks on the screen.
    Similarly, this would work for INSERT, UPDATE and DELETE...
    INSERT INTO my_spatial_table (shape) values(:polygon)
    The data type of an attribute parameter could be determined in two ways:
    a) By querying the Oracle catalog;
    b) By using a "PARAMETERS" command before the query as follows
    PARAMETERS name type [(size)] [, name type [(size)] ...]
    The PARAMETERS declaration has these parts:
    name     The name of the parameter.
    type     The type of the parameter.
    size     The size of the parameter in characters or bytes.
    2. When executing an SQL SELECT statement I would like the tool
    to suggest the HINTS that are needed to improve performance.
    3. Following on from 2, I would like to Tick an option that would return the
    EXPLAIN PLAN that the query optimizer used when executing my query.
    4. The tool has to support ALL Oracle's spatial vector data types.
    5. It would be nice to be able to work with GeoRasters. Since Spatial Console
    imports/exports shapefiles why not the same for rasters. However, the problem
    with supporting foreign data formats is WHERE DO YOU STOP!!!!!
    6. You could allow for the styling of the Spatial Console to be stored in the MapViewer catalogs or use the MapViewer catalogs when styling an Sdo_Geometry if it exists (I note that your tool extracts the SDO_METADATA
    why not the MapViewer metadata as well)?

Maybe you are looking for