CRM replication error
Dear experts,
We are using a CRM 5.0 system. when we create a sales order and try replicating it into ECC, we get the error:
"Partner with the partner role AP cannot be converted (Notification E C( 010)".
Has anyone of you seen this before? Could you please help me in resolving this?
Thanks
Ritwik
Hello Ritwik,
You need to turn off the mapping of the contact person from CRM to R/3
for sales order:
SPRO -> CRM -> Basic functions -> Partner processing
-> data transfer:
-> Distribution of Partner Functions from CRM into R/3
In that case this partner function is not send to R/3.
Hope this helps!
Best Regards,
Shanthala Kudva.
Similar Messages
-
Inhouse repair from CRM replications error
when i saved inhouse repair in CRM system, its saving with out error. but when i reopened it, its getting the following error and its not getting replicated to ECC system
"An error has occured in the system D00CLNT100 while copying the document
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors have occured while transferring the document into another system. Remove the error messages from the enclosed log.
Transmission log
Partner with the partner role AP cannot be converted (Notification E C( 010)"
what is partner ap role
how to deal with this.
Thanks,
ProiyaHi,
use t-code XD03 in ECC system, enter the corresponding customer code.
And click tab Contact persons thereafter.
On the tab Contact persons, check whether that contact person is available or not.
cheers, -
Customer Master replication error from R/3 to CRM
Experts,
I am trying to replicate Customer Master from R/3 to CRM.
All the settings have been done. Nothing shows up in Queues. However, Bdoc hangs in "Received" state.
When I try to reprocess the Bdoc, I get a prog dump of type DBIF_RSQL_INTERNAL_ERROR in below function module: CRM_BUPA_FRG0020_SAVE_TABS
at INSERT crmm_but_set0020 FROM TABLE it_set0020_insert[]
This data corresponds to Shipping data in Customer Master.
Can you please help? I saw a similar thread in the forum where there was a suggestion about R/3 plug in update. How can I do that?
Thanks in advance,
JDPls see Customer Master replication error
Closed. -
Replication Error in Quotation from CRM to ECC
Hi All,
This is regarding the Replication error which we are getting in the Quotation/Orders in the CRM server, when the Quotation/Orders is getting replicated to ECC server.
Let me explain the process,
We have the Internet Sales Application (ISA Version 5.0) implemented with B2B Scenario.
Dealers create Quotes from ISA for Configurable materials. The Configurable material has a "knowledge base" version already created in ECC in the table "SCEKB". Based on the configuration of the material, the knowledge base version of the material gets updated time to time.
When dealers create Quote for Configurable material from ISA, the latest "knowledge base" version gets determined in the Quotation. As a process, a new knowledge base version for the configurable is created for the material subsequently.
When Dealers are creating Orders for the Quotation from ISA, the order gets created in CRM server but does not get replicated to ECC due to the following error.
Internal error in communication between configuration and sales doc.CONFIGURATION_PROCESSING (Notification A V1 854)
Item 000100 does not exist (Notification E V1 331).
We suspect that the Order when getting replicated to ECC, is trying to determine the latest "knowledge base" version in the system for the material and since there is a mis-match between the Order and the "SCEKB" table, the Order is not getting replicated to ECC.
Can someone tell me how to suppress the above error and get the Order replicated to ECC without any issues.
Thanks,
RaviHi Ravi,
Did you managed to get a solution for this?
We have a similiar situation, can you please provide an input if you have any?
Thanks,
Sindhur. -
Replication error BP from CRM to R/3 - "Fill in all required entry Fields"
Dear Folks
I have maintained all steps mentioned in building block - C03. I have maintained separate account group approach. Made sure that number ranges are in sync in both the systems. Particularly in PIDE, mapping classification Consumer-Org 'A' to 'ZZ01' (Copy of 0001).
I changed all required entry to optional entry in my 'ZZ01' field status using OVT0.
But when i replicate using R3AS, i get an error 'Fill in all required entry Fields" - Error in receiving system (i.e R/3).
I tried manually creating customer in R/3 with the account group ZZ01. Surprisingly it does not allows me to save unless i give the reconcillation account entry, even though it is not a required field.
Please let me know for further details and Please help me to resolve this error. I am in real urgency.
Thanks
Keerthi
Chicago IL
507 401 1030Hi Karunakaran
Your reply answered my question of creating customer with no 'recon' a/c required entry. Thanks awarded 2 points.
My replication error is still hanging around. I found that It has no bearing on the 'Reconcillation A/c' required entry.
Some other field is still restricting my BP Role- Consumer:Organization to replicate. The error still showing as "required fields are not entered in R/3", even after suppressing "Reconcillation Account".
I think my reference customer master i created in R/3 using VD07 is not assigned in case of the account group Consumer:Organization.
But i don't know how to verify my doubts and get rid of this error.
Please help, in great urgency. -
CRM 2013 error when adding a new appointment in Outlook.
When added
NEW DEADLINE The outlook on the calendar, I received an
error in CRM.
/////ERROR//////////////////////////////////////////////////////////////////////////////////////////
[2015-03-05 09:20:34.403] Process: w3wp |Organization:b5eb04f5-c174-e411-8f8d-0019990163cf |Thread: 28 |Category: Exception |User: 04b7d2dc-0428-e211-8585-000c29667e7c |Level: Error |ReqId: 8b0e1332-9d32-456b-b953-aa5bfc9c1912 | CrmException..ctor
ilOffset = 0x7
at CrmException..ctor(String message, Exception innerException, Int32 errorCode, Boolean isFlowControlException) ilOffset = 0x7
at CrmException..ctor(String message, Int32 errorCode) ilOffset = 0x5
at SecurityLibrary.RetrievePrivilegeForUser(IUser user, Guid privilege, ExecutionContext context) ilOffset = 0x14B
at SecurityLibrary.TryCheckPrivilege(Guid user, Guid privilege, ExecutionContext context) ilOffset = 0x3D
at SecurityLibrary.TryCheckPrivilege(SecurityPrincipal principal, Guid privilege, ExecutionContext context) ilOffset = 0x42
at SecurityLibrary.CheckPrivilege(SecurityPrincipal principal, Guid privilege, ExecutionContext context) ilOffset = 0x0
at AddressManager.GetOwnerCandidate(AddressEntry addressEntry) ilOffset = 0x50
at AddressResolver.BuildResolvedAddressEntry(AddressCategory category, BusinessEntity businessEntity, Guid& objectId, Boolean active, String emailAddressMatched) ilOffset = 0x58
at AddressResolver.GetPrunedList(BusinessEntityCollection responseCollection, AddressCategory category, Hashtable removeDuplicateFilter) ilOffset = 0x6B
at AddressResolver.DoResolve(AddressEntry[] addressEntriesToResolve, Int32[] objectTypes, Boolean matchPartialEmailAddresses) ilOffset = 0x70
at AddressManager.ResolveEmailAddressInternalHelper(String emailAddresses, Int32[] objectTypeCodes) ilOffset = 0x1F
at CommunicationActivityServiceBase.ResolveUnresolvedParties(BusinessEntityCollection parties, Int32[] objectTypes, ExecutionContext context) ilOffset = 0x5C
at AppointmentService.Book(BusinessEntity entity, ExecutionContext context) ilOffset = 0x3D
at RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor) ilOffset = 0xFFFFFFFF
at RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments) ilOffset = 0x25
at RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) ilOffset = 0xCF
at LogicalMethodInfo.Invoke(Object target, Object[] values) ilOffset = 0x4F
at InternalOperationPlugin.Execute(IServiceProvider serviceProvider) ilOffset = 0x57
at V5PluginProxyStep.ExecuteInternal(PipelineExecutionContext context) ilOffset = 0x200
at VersionedPluginProxyStepBase.Execute(PipelineExecutionContext context) ilOffset = 0x65
at Pipeline.Execute(PipelineExecutionContext context) ilOffset = 0x6C
at MessageProcessor.Execute(PipelineExecutionContext context) ilOffset = 0x1C5
at InternalMessageDispatcher.Execute(PipelineExecutionContext context) ilOffset = 0xE4
at ExternalMessageDispatcher.ExecuteInternal(IInProcessOrganizationServiceFactory serviceFactory, IPlatformMessageDispatcherFactory dispatcherFactory, String messageName, String requestName, Int32 primaryObjectTypeCode, Int32 secondaryObjectTypeCode,
ParameterCollection fields, CorrelationToken correlationToken, CallerOriginToken originToken, UserAuth userAuth, Guid callerId, Guid transactionContextId, Int32 invocationSource, Nullable`1 requestId, Version endpointVersion) ilOffset = 0x16E
at OrganizationSdkServiceInternal.ExecuteRequest(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, UserAuth userAuth, Guid targetUserId, OrganizationContext context, Boolean
returnResponse, Boolean checkAdminMode) ilOffset = 0x1F1
at OrganizationSdkServiceInternal.ExecuteRequest(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, Boolean checkAdminMode) ilOffset = 0x2D
at OrganizationSdkServiceInternal.Execute(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, Boolean checkAdminMode) ilOffset = 0x26
at OrganizationSdkService.Execute(OrganizationRequest request) ilOffset = 0xD
at ilOffset = 0xFFFFFFFF
at SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs) ilOffset = 0x241
at DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc) ilOffset = 0x100
at ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc) ilOffset = 0x48
at MessageRpc.Process(Boolean isOperationContextSet) ilOffset = 0x62
at Wrapper.Resume(Boolean& alreadyResumedNoLock) ilOffset = 0x1B
at ThreadBehavior.SynchronizationContextStartCallback(Object state) ilOffset = 0x0
at ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) ilOffset = 0x70
at ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) ilOffset = 0x4
at QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem() ilOffset = 0x0
at ThreadPoolWorkQueue.Dispatch() ilOffset = 0xA3
>Crm Exception: Message: SecLib::RetrievePrivilegeForUser failed - no roles are assigned to user. Returned hr = -2147209463, User: ed2ef8c8-69db-e311-9816-0019990163cf, ErrorCode: -2147209463
[2015-03-05 09:20:34.572] Process: w3wp |Organization:b5eb04f5-c174-e411-8f8d-0019990163cf |Thread: 28 |Category: Platform.Sdk |User: 04b7d2dc-0428-e211-8585-000c29667e7c |Level: Error |ReqId: 8b0e1332-9d32-456b-b953-aa5bfc9c1912 | VersionedPluginProxyStepBase.Execute
ilOffset = 0x65
>Web Service Plug-in failed in SdkMessageProcessingStepId: {E4C9BB1B-EA3E-DB11-86A7-000A3A5473E8}; EntityName: appointment; Stage: 30; MessageName: Book; AssemblyName: Microsoft.Crm.Extensibility.InternalOperationPlugin, Microsoft.Crm.ObjectModel, Version=6.0.0.0,
Culture=neutral, PublicKeyToken=31bf3856ad364e35; ClassName: Microsoft.Crm.Extensibility.InternalOperationPlugin; Exception: Unhandled Exception: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation.
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.Web.Services.Protocols.LogicalMethodInfo.Invoke(Object target, Object[] values)
at Microsoft.Crm.Extensibility.InternalOperationPlugin.Execute(IServiceProvider serviceProvider)
at Microsoft.Crm.Extensibility.V5PluginProxyStep.ExecuteInternal(PipelineExecutionContext context)
at Microsoft.Crm.Extensibility.VersionedPluginProxyStepBase.Execute(PipelineExecutionContext context)
Inner Exception: System.Globalization.CultureNotFoundException: Culture is not supported.
Parameter name: culture
0 (0x0000) is an invalid culture identifier.
at System.Globalization.CultureInfo.InitializeFromCultureId(Int32 culture, Boolean useUserOverride)
at System.Globalization.CultureInfo..ctor(Int32 culture)
at Microsoft.Crm.Common.BusinessEntities.AppointmentConflictNotificationGenerator.AddNotifications(NotificationAdder notifications, ErrorInfo[] errorInfoArray, CrmResourceManager crmResourceManager, IOrganizationContext context)
at Microsoft.Crm.Common.ObjectModel.AppointmentService.Book(BusinessEntity entity, ExecutionContext context)
[2015-03-05 09:20:34.579] Process: w3wp |Organization:b5eb04f5-c174-e411-8f8d-0019990163cf |Thread: 28 |Category: Exception |User: 04b7d2dc-0428-e211-8585-000c29667e7c |Level: Error |ReqId: 8b0e1332-9d32-456b-b953-aa5bfc9c1912 | CrmException..ctor
ilOffset = 0x7
at CrmException..ctor(String message, Exception innerException, Int32 errorCode, Boolean isFlowControlException) ilOffset = 0x7
at CrmException..ctor(Exception innerException, Int32 errorCode, Object[] arguments) ilOffset = 0xB
at VersionedPluginProxyStepBase.Execute(PipelineExecutionContext context) ilOffset = 0x65
at Pipeline.Execute(PipelineExecutionContext context) ilOffset = 0x6C
at MessageProcessor.Execute(PipelineExecutionContext context) ilOffset = 0x1C5
at InternalMessageDispatcher.Execute(PipelineExecutionContext context) ilOffset = 0xE4
at ExternalMessageDispatcher.ExecuteInternal(IInProcessOrganizationServiceFactory serviceFactory, IPlatformMessageDispatcherFactory dispatcherFactory, String messageName, String requestName, Int32 primaryObjectTypeCode, Int32 secondaryObjectTypeCode,
ParameterCollection fields, CorrelationToken correlationToken, CallerOriginToken originToken, UserAuth userAuth, Guid callerId, Guid transactionContextId, Int32 invocationSource, Nullable`1 requestId, Version endpointVersion) ilOffset = 0x16E
at OrganizationSdkServiceInternal.ExecuteRequest(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, UserAuth userAuth, Guid targetUserId, OrganizationContext context, Boolean
returnResponse, Boolean checkAdminMode) ilOffset = 0x1F1
at OrganizationSdkServiceInternal.ExecuteRequest(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, Boolean checkAdminMode) ilOffset = 0x2D
at OrganizationSdkServiceInternal.Execute(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, Boolean checkAdminMode) ilOffset = 0x26
at OrganizationSdkService.Execute(OrganizationRequest request) ilOffset = 0xD
at ilOffset = 0xFFFFFFFF
at SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs) ilOffset = 0x241
at DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc) ilOffset = 0x100
at ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc) ilOffset = 0x48
at MessageRpc.Process(Boolean isOperationContextSet) ilOffset = 0x62
at Wrapper.Resume(Boolean& alreadyResumedNoLock) ilOffset = 0x1B
at ThreadBehavior.SynchronizationContextStartCallback(Object state) ilOffset = 0x0
at ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) ilOffset = 0x70
at ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) ilOffset = 0x4
at QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem() ilOffset = 0x0
at ThreadPoolWorkQueue.Dispatch() ilOffset = 0xA3
>Crm Exception: Message: An unexpected error occurred., ErrorCode: -2147220970, InnerException: System.Globalization.CultureNotFoundException: Culture is not supported.
Parameter name: culture
0 (0x0000) is an invalid culture identifier.
at System.Globalization.CultureInfo.InitializeFromCultureId(Int32 culture, Boolean useUserOverride)
at System.Globalization.CultureInfo..ctor(Int32 culture)
at Microsoft.Crm.Common.BusinessEntities.AppointmentConflictNotificationGenerator.AddNotifications(NotificationAdder notifications, ErrorInfo[] errorInfoArray, CrmResourceManager crmResourceManager, IOrganizationContext context)
at Microsoft.Crm.Common.ObjectModel.AppointmentService.Book(BusinessEntity entity, ExecutionContext context)
[2015-03-05 09:20:34.580] Process: w3wp |Organization:b5eb04f5-c174-e411-8f8d-0019990163cf |Thread: 28 |Category: Platform |User: 04b7d2dc-0428-e211-8585-000c29667e7c |Level: Error |ReqId: 8b0e1332-9d32-456b-b953-aa5bfc9c1912 | MessageProcessor.Execute
ilOffset = 0x1C5
>MessageProcessor fail to process message 'Book' for 'appointment'.
[2015-03-05 09:20:34.581] Process: w3wp |Organization:00000000-0000-0000-0000-000000000000 |Thread: 28 |Category: Platform |User: 00000000-0000-0000-0000-000000000000 |Level: Error |ReqId: 8b0e1332-9d32-456b-b953-aa5bfc9c1912 | ExceptionConverter.ConvertToFault
ilOffset = 0x69
>UNEXPECTED: no fault?
[2015-03-05 09:20:34.582] Process: w3wp |Organization:00000000-0000-0000-0000-000000000000 |Thread: 28 |Category: Platform |User: 00000000-0000-0000-0000-000000000000 |Level: Error |ReqId: 8b0e1332-9d32-456b-b953-aa5bfc9c1912 | ExceptionConverter.ConvertMessageAndErrorCode
ilOffset = 0x23B
>System.Globalization.CultureNotFoundException: Microsoft Dynamics CRM has experienced an error. Reference number for administrators or support: #895E889A: System.Globalization.CultureNotFoundException: Culture is not supported.
>Parameter name: culture
>0 (0x0000) is an invalid culture identifier.
> at System.Globalization.CultureInfo.InitializeFromCultureId(Int32 culture, Boolean useUserOverride)
> at System.Globalization.CultureInfo..ctor(Int32 culture)
> at Microsoft.Crm.Common.BusinessEntities.AppointmentConflictNotificationGenerator.AddNotifications(NotificationAdder notifications, ErrorInfo[] errorInfoArray, CrmResourceManager crmResourceManager, IOrganizationContext context)
> at Microsoft.Crm.Common.ObjectModel.AppointmentService.Book(BusinessEntity entity, ExecutionContext context)
/////END ERROR//////////////////////////////////////////////////////////////////////////////////////////
And then the
date of the duplicates in the calendar
in Outlook and CRM.
My version CRM 2013 -
6.1.2.112
Crm2013wasthemigratedfromthe
2011 version.
Does anyone have any idea how to
solve it.I checked it, these errors
occur on all users. Below
the main errors that occur.
Crm Exception: Message: SecLib::RetrievePrivilegeForUser failed - no roles are assigned to user. Returned hr = -2147209463, User: ed2ef8c8-69db-e311-9816-0019990163cf, ErrorCode: -2147209463
Web Service Plug-in failed in SdkMessageProcessingStepId: {E4C9BB1B-EA3E-DB11-86A7-000A3A5473E8}; EntityName: appointment; Stage: 30; MessageName: Book; AssemblyName: Microsoft.Crm.Extensibility.InternalOperationPlugin, Microsoft.Crm.ObjectModel, Version=6.0.0.0,
Culture=neutral, PublicKeyToken=31bf3856ad364e35; ClassName: Microsoft.Crm.Extensibility.InternalOperationPlugin; Exception: Unhandled Exception: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation.
Inner Exception: System.Globalization.CultureNotFoundException: Culture is not supported.
Parameter name: culture
0 (0x0000) is an invalid culture identifier.
Crm Exception: Message: An unexpected error occurred., ErrorCode: -2147220970, InnerException: System.Globalization.CultureNotFoundException: Culture is not supported.
Parameter name: culture
0 (0x0000) is an invalid culture identifier.
MessageProcessor fail to process message 'Book' for 'appointment'.
System.Globalization.CultureNotFoundException: Microsoft Dynamics CRM has experienced an error. Reference number for administrators or support: #895E889A: System.Globalization.CultureNotFoundException: Culture is not supported.
>Parameter name: culture
>0 (0x0000) is an invalid culture identifier. -
I have been getting a pattern of errors on my DC. I have two pair of eyes on these errors, but everything seems to running ok. The only issue we've had is our workstations were putting out the "Trust domain relationship failed..." error. We were
able fix this issue by removing those machines from the domain, changing the names, and then adding them back. My only concern is that the errors below were the cause of that, and that the issue may return unless this is resolved. I've checked all of my services
and DNS's settings. IPv6 is on. There haven't been any changes to the server in sometime. Which is the baffling part. Any insight on this would be very helpful. I apologize in advance for not being well versed in this area... AD Replication is not my strongest
point.
Error 1
Log Name: Directory Service
Source: Microsoft-Windows-ActiveDirectory_DomainService
Date: 1/15/2015 9:16:53 AM
Event ID: 2092
Task Category: Replication
Level: Warning
Keywords: Classic
User: ANONYMOUS LOGON
Computer: LAHDC1.LAH
Description:
This server is the owner of the following FSMO role, but does not consider it valid. For the partition which contains the FSMO, this server has not replicated successfully with any of its partners since this server has been restarted. Replication errors are
preventing validation of this role.
Operations which require contacting a FSMO operation master will fail until this condition is corrected.
FSMO Role: CN=RID Manager$,CN=System,DC=LAH
User Action:
1. Initial synchronization is the first early replications done by a system as it is starting. A failure to initially synchronize may explain why a FSMO role cannot be validated. This process is explained in KB article 305476.
2. This server has one or more replication partners, and replication is failing for all of these partners. Use the command repadmin /showrepl to display the replication errors. Correct the error in question. For example there maybe problems with IP connectivity,
DNS name resolution, or security authentication that are preventing successful replication.
3. In the rare event that all replication partners being down is an expected occurance, perhaps because of maintenance or a disaster recovery, you can force the role to be validated. This can be done by using NTDSUTIL.EXE to seize the role to the same server.
This may be done using the steps provided in KB articles 255504 and 324801 on http://support.microsoft.com.
The following operations may be impacted:
Schema: You will no longer be able to modify the schema for this forest.
Domain Naming: You will no longer be able to add or remove domains from this forest.
PDC: You will no longer be able to perform primary domain controller operations, such as Group Policy updates and password resets for non-Active Directory Domain Services accounts.
RID: You will not be able to allocation new security identifiers for new user accounts, computer accounts or security groups.
Infrastructure: Cross-domain name references, such as universal group memberships, will not be updated properly if their target object is moved or renamed.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-ActiveDirectory_DomainService" Guid="{0e8478c5-3605-4e8c-8497-1e730c959516}" EventSourceName="NTDS General" />
<EventID Qualifiers="32768">2092</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>5</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2015-01-15T15:16:53.716341400Z" />
<EventRecordID>19509</EventRecordID>
<Correlation />
<Execution ProcessID="492" ThreadID="1088" />
<Channel>Directory Service</Channel>
<Computer>LAHDC1.LAH</Computer>
<Security UserID="S-1-5-7" />
</System>
<EventData>
<Data>CN=RID Manager$,CN=System,DC=LAH</Data>
</EventData>
</Event>
Error 2
Log Name: Directory Service
Source: Microsoft-Windows-ActiveDirectory_DomainService
Date: 1/15/2015 9:16:33 AM
Event ID: 2887
Task Category: LDAP Interface
Level: Warning
Keywords: Classic
User: ANONYMOUS LOGON
Computer: LAHDC1.LAH
Description:
During the previous 24 hour period, some clients attempted to perform LDAP binds that were either:
(1) A SASL (Negotiate, Kerberos, NTLM, or Digest) LDAP bind that did not request signing (integrity validation), or
(2) A LDAP simple bind that was performed on a cleartext (non-SSL/TLS-encrypted) connection
This directory server is not currently configured to reject such binds. The security of this directory server can be significantly enhanced by configuring the server to reject such binds. For more details and information on how to make this configuration
change to the server, please see http://go.microsoft.com/fwlink/?LinkID=87923.
Summary information on the number of these binds received within the past 24 hours is below.
You can enable additional logging to log an event each time a client makes such a bind, including information on which client made the bind. To do so, please raise the setting for the "LDAP Interface Events" event logging category to level 2
or higher.
Number of simple binds performed without SSL/TLS: 0
Number of Negotiate/Kerberos/NTLM/Digest binds performed without signing: 994
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-ActiveDirectory_DomainService" Guid="{0e8478c5-3605-4e8c-8497-1e730c959516}" EventSourceName="NTDS General" />
<EventID Qualifiers="32768">2887</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>16</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2015-01-15T15:16:33.350305000Z" />
<EventRecordID>19508</EventRecordID>
<Correlation />
<Execution ProcessID="492" ThreadID="692" />
<Channel>Directory Service</Channel>
<Computer>LAHDC1.LAH</Computer>
<Security UserID="S-1-5-7" />
</System>
<EventData>
<Data>0</Data>
<Data>994</Data>
</EventData>
</Event>
DCDIAG Results
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Administrator.LAH>dcdiag.exe
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = LAHDC1
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\LAHDC1
Starting test: Connectivity
......................... LAHDC1 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\LAHDC1
Starting test: Advertising
......................... LAHDC1 passed test Advertising
Starting test: FrsEvent
......................... LAHDC1 passed test FrsEvent
Starting test: DFSREvent
......................... LAHDC1 passed test DFSREvent
Starting test: SysVolCheck
......................... LAHDC1 passed test SysVolCheck
Starting test: KccEvent
A warning event occurred. EventID: 0x8000082C
Time Generated: 01/15/2015 08:47:34
Event String:
A warning event occurred. EventID: 0x8000082C
Time Generated: 01/15/2015 08:47:53
Event String:
......................... LAHDC1 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... LAHDC1 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... LAHDC1 passed test MachineAccount
Starting test: NCSecDesc
Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
Replicating Directory Changes In Filtered Set
access rights for the naming context:
DC=ForestDnsZones,DC=LAH
Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
Replicating Directory Changes In Filtered Set
access rights for the naming context:
DC=DomainDnsZones,DC=LAH
......................... LAHDC1 failed test NCSecDesc
Starting test: NetLogons
......................... LAHDC1 passed test NetLogons
Starting test: ObjectsReplicated
......................... LAHDC1 passed test ObjectsReplicated
Starting test: Replications
[Replications Check,LAHDC1] A recent replication attempt failed:
From LAHDC02 to LAHDC1
Naming Context: DC=ForestDnsZones,DC=LAH
The replication generated an error (8456):
The source server is currently rejecting replication requests.
The failure occurred at 2015-01-15 08:46:33.
The last success occurred at 2014-10-03 15:52:49.
2494 failures have occurred since the last success.
Replication has been explicitly disabled through the server
options.
[Replications Check,LAHDC1] A recent replication attempt failed:
From LAHDC02 to LAHDC1
Naming Context: DC=DomainDnsZones,DC=LAH
The replication generated an error (8456):
The source server is currently rejecting replication requests.
The failure occurred at 2015-01-15 08:46:33.
The last success occurred at 2014-10-03 15:52:49.
2494 failures have occurred since the last success.
Replication has been explicitly disabled through the server
options.
[Replications Check,LAHDC1] A recent replication attempt failed:
From LAHDC02 to LAHDC1
Naming Context: CN=Schema,CN=Configuration,DC=LAH
The replication generated an error (8456):
The source server is currently rejecting replication requests.
The failure occurred at 2015-01-15 08:46:33.
The last success occurred at 2014-10-03 15:52:49.
2494 failures have occurred since the last success.
Replication has been explicitly disabled through the server
options.
[Replications Check,LAHDC1] A recent replication attempt failed:
From LAHDC02 to LAHDC1
Naming Context: CN=Configuration,DC=LAH
The replication generated an error (8456):
The source server is currently rejecting replication requests.
The failure occurred at 2015-01-15 08:46:33.
The last success occurred at 2014-10-03 15:52:49.
3994 failures have occurred since the last success.
Replication has been explicitly disabled through the server
options.
[Replications Check,LAHDC1] A recent replication attempt failed:
From LAHDC02 to LAHDC1
Naming Context: DC=LAH
The replication generated an error (8456):
The source server is currently rejecting replication requests.
The failure occurred at 2015-01-15 08:46:33.
The last success occurred at 2014-10-03 16:24:02.
2664 failures have occurred since the last success.
Replication has been explicitly disabled through the server
options.
......................... LAHDC1 failed test Replications
Starting test: RidManager
......................... LAHDC1 passed test RidManager
Starting test: Services
......................... LAHDC1 passed test Services
Starting test: SystemLog
......................... LAHDC1 passed test SystemLog
Starting test: VerifyReferences
......................... LAHDC1 passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : LAH
Starting test: CheckSDRefDom
......................... LAH passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... LAH passed test CrossRefValidation
Running enterprise tests on : LAH
Starting test: LocatorCheck
......................... LAH passed test LocatorCheck
Starting test: Intersite
......................... LAH passed test Intersite
C:\Users\Administrator.LAH>I see the following errors:
"The source server is currently rejecting replication requests."
"Replication has been explicitly disabled through the server options."
I would recommend starting with this MS KB which describes your problem: https://support.microsoft.com/kb/2023007?wa=wsignin1.0
Also, I would recommend that you follow the recommendations I shared in this Wiki: http://social.technet.microsoft.com/wiki/contents/articles/18513.active-directory-replication-issues-basic-troubleshooting-steps-single-ad-domain-in-a-single-ad-forest.aspx
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
Replication Error with Vendor Master Records
Hello,
We are trying to replicate vendor master records from R/3 to SRM via BBPGETVD. When we go to SLG1, there is an error stating Business Partner XXXX: Invalid Value 0003 for field Authorization Group.
Currently, the AP dept. maintains the field Authorization Group in the Vendor Master Record 'Control' screen with a fixed value of 0003 (LFA1-BEGRU). When the replication occurs, SRM complains that this field value does not exist in a SRM customizing table or is a fixed value.
Do we need to implement the BBP_TRANSDATA_PREP BAdI to pass this value as a fixed value to replicate vendors?
-regards
Shaz KhanI'm planning to implement bbp_transdata_prep. Wondering if either one of you can help. I've also opened another thread with my specific questions.
Replication Error with Vendor Master Records -
Replication Error between DC and PDC after a reboot.
Hi,
We have a very small server environment and having one DC and one ADC. Last week ADC got a sudden restart. After booting it shown one service failed error. Since then the ADC is not replicating with DC. Giving below the diagnosis
results of Dcdiag and FSMO check.
Domain Controller Diagnosis
Performing initial setup:
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\DC
Starting test: Connectivity
......................... DC passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\DC
DNS Tests are running and not hung. Please wait a few minutes...
Running partition tests on : ForestDnsZones
Running partition tests on : DomainDnsZones
Running partition tests on : Schema
Running partition tests on : Configuration
Running partition tests on : bannaridc
Running enterprise tests on : bannaridc.com
Starting test: DNS
......................... bannaridc.com passed test DNS
Domain Controller Diagnosis
Performing initial setup:
* Verifying that the local machine backupdc, is a DC.
* Connecting to directory service on server backupdc.
* Collecting site info.
* Identifying all servers.
* Identifying all NC cross-refs.
* Found 2 DC(s). Testing 1 of them.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\BACKUPDC
Starting test: Connectivity
* Active Directory LDAP Services Check
* Active Directory RPC Services Check
......................... BACKUPDC passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\BACKUPDC
Starting test: Replications
* Replications Check
[Replications Check,BACKUPDC] A recent replication attempt failed:
From DC to BACKUPDC
Naming Context: DC=ForestDnsZones,DC=bannaridc,DC=com
The replication generated an error (1256):
The remote system is not available. For information about network troubleshooting, see Windows Help.
The failure occurred at 2014-05-15 12:29:41.
The last success occurred at 2014-05-12 09:23:27.
76 failures have occurred since the last success.
REPLICATION LATENCY WARNING
ERROR: Expected notification link is missing.
Source DC
Replication of new changes along this path will be delayed.
This problem should self-correct on the next periodic sync.
[Replications Check,BACKUPDC] A recent replication attempt failed:
From DC to BACKUPDC
Naming Context: DC=DomainDnsZones,DC=bannaridc,DC=com
The replication generated an error (1256):
The remote system is not available. For information about network troubleshooting, see Windows Help.
The failure occurred at 2014-05-15 12:29:41.
The last success occurred at 2014-05-12 09:33:40.
76 failures have occurred since the last success.
REPLICATION LATENCY WARNING
ERROR: Expected notification link is missing.
Source DC
Replication of new changes along this path will be delayed.
This problem should self-correct on the next periodic sync.
[Replications Check,BACKUPDC] A recent replication attempt failed:
From DC to BACKUPDC
Naming Context: CN=Schema,CN=Configuration,DC=bannaridc,DC=com
The replication generated an error (5):
Access is denied.
The failure occurred at 2014-05-15 12:29:41.
The last success occurred at 2014-05-12 09:23:26.
76 failures have occurred since the last success.
[Replications Check,BACKUPDC] A recent replication attempt failed:
From DC to BACKUPDC
Naming Context: CN=Configuration,DC=bannaridc,DC=com
The replication generated an error (5):
Access is denied.
The failure occurred at 2014-05-15 12:29:41.
The last success occurred at 2014-05-12 09:23:26.
76 failures have occurred since the last success.
REPLICATION LATENCY WARNING
ERROR: Expected notification link is missing.
Source DC
Replication of new changes along this path will be delayed.
This problem should self-correct on the next periodic sync.
[Replications Check,BACKUPDC] A recent replication attempt failed:
From DC to BACKUPDC
Naming Context: DC=bannaridc,DC=com
The replication generated an error (5):
Access is denied.
The failure occurred at 2014-05-15 12:29:42.
The last success occurred at 2014-05-12 09:42:25.
95 failures have occurred since the last success.
REPLICATION LATENCY WARNING
ERROR: Expected notification link is missing.
Source DC
Replication of new changes along this path will be delayed.
This problem should self-correct on the next periodic sync.
* Replication Latency Check
REPLICATION-RECEIVED LATENCY WARNING
BACKUPDC: Current time is 2014-05-15 13:24:11.
DC=ForestDnsZones,DC=bannaridc,DC=com
Last replication recieved from DC at 2014-05-12 09:23:27.
Latency information for 2 entries in the vector were ignored.
2 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=DomainDnsZones,DC=bannaridc,DC=com
Last replication recieved from DC at 2014-05-12 09:33:40.
Latency information for 2 entries in the vector were ignored.
2 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Schema,CN=Configuration,DC=bannaridc,DC=com
Last replication recieved from DC at 2014-05-12 09:23:26.
Latency information for 2 entries in the vector were ignored.
2 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Configuration,DC=bannaridc,DC=com
Last replication recieved from DC at 2014-05-12 09:23:26.
Latency information for 2 entries in the vector were ignored.
2 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=bannaridc,DC=com
Last replication recieved from DC at 2014-05-12 09:42:25.
Latency information for 2 entries in the vector were ignored.
2 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
* Replication Site Latency Check
......................... BACKUPDC passed test Replications
Test omitted by user request: Topology
Test omitted by user request: CutoffServers
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC BACKUPDC.
* Security Permissions Check for
DC=ForestDnsZones,DC=bannaridc,DC=com
(NDNC,Version 2)
* Security Permissions Check for
DC=DomainDnsZones,DC=bannaridc,DC=com
(NDNC,Version 2)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=bannaridc,DC=com
(Schema,Version 2)
* Security Permissions Check for
CN=Configuration,DC=bannaridc,DC=com
(Configuration,Version 2)
* Security Permissions Check for
DC=bannaridc,DC=com
(Domain,Version 2)
......................... BACKUPDC passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\BACKUPDC\netlogon
Verified share \\BACKUPDC\sysvol
......................... BACKUPDC passed test NetLogons
Starting test: Advertising
The DC BACKUPDC is advertising itself as a DC and having a DS.
The DC BACKUPDC is advertising as an LDAP server
The DC BACKUPDC is advertising as having a writeable directory
The DC BACKUPDC is advertising as a Key Distribution Center
Warning: BACKUPDC is not advertising as a time server.
......................... BACKUPDC failed test Advertising
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=DC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=bannaridc,DC=com
Role Domain Owner = CN=NTDS Settings,CN=DC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=bannaridc,DC=com
Role PDC Owner = CN=NTDS Settings,CN=DC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=bannaridc,DC=com
Role Rid Owner = CN=NTDS Settings,CN=DC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=bannaridc,DC=com
Role Infrastructure Update Owner = CN=NTDS Settings,CN=DC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=bannaridc,DC=com
......................... BACKUPDC passed test KnowsOfRoleHolders
Starting test: RidManager
* Available RID Pool for the Domain is 3107 to 1073741823
* DC.bannaridc.com is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 2607 to 3106
* rIDPreviousAllocationPool is 2607 to 3106
* rIDNextRID: 2771
......................... BACKUPDC passed test RidManager
Starting test: MachineAccount
Checking machine account for DC BACKUPDC on DC BACKUPDC.
* SPN found :LDAP/backupdc.bannaridc.com/bannaridc.com
* SPN found :LDAP/backupdc.bannaridc.com
* SPN found :LDAP/BACKUPDC
* SPN found :LDAP/backupdc.bannaridc.com/BANNARIDC
* SPN found :LDAP/bcbf105f-e755-4c24-b846-01d447834480._msdcs.bannaridc.com
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/bcbf105f-e755-4c24-b846-01d447834480/bannaridc.com
* SPN found :HOST/backupdc.bannaridc.com/bannaridc.com
* SPN found :HOST/backupdc.bannaridc.com
* SPN found :HOST/BACKUPDC
* SPN found :HOST/backupdc.bannaridc.com/BANNARIDC
* SPN found :GC/backupdc.bannaridc.com/bannaridc.com
......................... BACKUPDC passed test MachineAccount
Starting test: Services
* Checking Service: Dnscache
* Checking Service: NtFrs
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: RpcSs
* Checking Service: w32time
* Checking Service: NETLOGON
......................... BACKUPDC passed test Services
Test omitted by user request: OutboundSecureChannels
Starting test: ObjectsReplicated
BACKUPDC is in domain DC=bannaridc,DC=com
Checking for CN=BACKUPDC,OU=Domain Controllers,DC=bannaridc,DC=com in domain DC=bannaridc,DC=com on 1 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=BACKUPDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=bannaridc,DC=com in domain CN=Configuration,DC=bannaridc,DC=com on 1 servers
Object is up-to-date on all servers.
......................... BACKUPDC passed test ObjectsReplicated
Starting test: frssysvol
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... BACKUPDC passed test frssysvol
Starting test: frsevent
* The File Replication Service Event log test
......................... BACKUPDC passed test frsevent
Starting test: kccevent
* The KCC Event log test
Found no KCC errors in Directory Service Event log in the last 15 minutes.
......................... BACKUPDC passed test kccevent
Starting test: systemlog
* The System Event log test
An Error Event occured. EventID: 0xC25A001D
Time Generated: 05/15/2014 12:30:20
(Event String could not be retrieved)
An Error Event occured. EventID: 0xC25A001D
Time Generated: 05/15/2014 12:49:04
(Event String could not be retrieved)
An Error Event occured. EventID: 0x40000004
Time Generated: 05/15/2014 12:53:20
Event String: The kerberos client received a
KRB_AP_ERR_MODIFIED error from the server
host/backupdc.bannaridc.com. The target name
used was
LDAP/bcbf105f-e755-4c24-b846-01d447834480._msdcs.bannaridc.com.
This indicates that the password used to encrypt
the kerberos service ticket is different than
that on the target server. Commonly, this is due
to identically named machine accounts in the
target realm (BANNARIDC.COM), and the client
realm. Please contact your system
administrator.
An Error Event occured. EventID: 0xC25A001D
Time Generated: 05/15/2014 13:12:19
(Event String could not be retrieved)
......................... BACKUPDC failed test systemlog
Test omitted by user request: VerifyReplicas
Starting test: VerifyReferences
The system object reference (serverReference)
CN=BACKUPDC,OU=Domain Controllers,DC=bannaridc,DC=com and backlink on
CN=BACKUPDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=bannaridc,DC=com
are correct.
The system object reference (frsComputerReferenceBL)
CN=BACKUPDC,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=bannaridc,DC=com
and backlink on CN=BACKUPDC,OU=Domain Controllers,DC=bannaridc,DC=com
are correct.
The system object reference (serverReferenceBL)
CN=BACKUPDC,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=bannaridc,DC=com
and backlink on
CN=NTDS Settings,CN=BACKUPDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=bannaridc,DC=com
are correct.
......................... BACKUPDC passed test VerifyReferences
Test omitted by user request: VerifyEnterpriseReferences
Test omitted by user request: CheckSecurityError
Running partition tests on : ForestDnsZones
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Running partition tests on : DomainDnsZones
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Running partition tests on : Schema
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Running partition tests on : Configuration
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Running partition tests on : bannaridc
Starting test: CrossRefValidation
......................... bannaridc passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... bannaridc passed test CheckSDRefDom
Running enterprise tests on : bannaridc.com
Starting test: Intersite
Skipping site Default-First-Site-Name, this site is outside the scope
provided by the command line arguments provided.
......................... bannaridc.com passed test Intersite
Starting test: FsmoCheck
GC Name: \\DC.bannaridc.com
Locator Flags: 0xe00003fd
PDC Name: \\DC.bannaridc.com
Locator Flags: 0xe00003fd
Time Server Name: \\DC.bannaridc.com
Locator Flags: 0xe00003fd
Preferred Time Server Name: \\DC.bannaridc.com
Locator Flags: 0xe00003fd
KDC Name: \\backupdc.bannaridc.com
Locator Flags: 0xe00001b8
......................... bannaridc.com passed test FsmoCheck
Test omitted by user request: DNS
Test omitted by user request: DNS
Please help me to resolve this issue.
Regards,
surenHi suren,
Error 1256 is logged as the replication status per partition as a result of the destination DC cancelling the sync request from the source DC due to a connectivity failure previously encountered.
Please refer to the articles below to troubleshoot the issue:
Troubleshooting AD Replication error 1256: The remote system is not available.
http://support.microsoft.com/kb/2200187
Troubleshooting AD Replication error 5: Access is denied
http://support.microsoft.com/kb/2002013
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hello experts,
when running a process chain I get an replication error.
it says
"..the DataSource 8Z_ODS_1 (its an ODS-Object) has a different timestamp in sourcesystem than in Business Information Warehouse ..."
I have no clue what this is supposed to mean!
any suggestions?
thanx
AxelHi Linda,
1. You can use the below program to activate.
RS_TRANSTRU_ACTIVATE_ALL porgram (se38) -> give the infosource name and activate.
2. Or search the Infosource in RSA1 and go into the Tranfer rules and click on activate button.
If you do not have authorisation in your Quality or Production server for the above two steps, do the step 2 in Development. You will be prompted for a transport request creation. Create the TR and release it to the target server.
regards,
Archana -
ACS 4.1 replication error
Hi netPro,
when i start the replication that's an error ,
ACS Internal Database Replication Errors
Number Error
1 'User and Group Database' and 'Group Database' cannot be replicated together
what does it means ?
thanks.
regards,
JackHi Jack,
Under database replication components, either select "user and group database" or "group database only"..You can't have both selected, as first option include the other..
regards
Hamid -
Bank Key giving error for ECC to CRM replication
While replicating BPs from ECC to CRM, the following error shows in the BDoc:
"Bank XXXX-YYY for Country ZZ does not exist"
To the best of our understanding, the Bank (branch: XXXX-YYY) detail is not available in the CRM, but where to make in CRM or why should it not be replicated from ECC when the same is created in ECC in the first instance itself.
Seek your guidance please.
Regards,
TariqDear Leon,
Thank you for your advise and after going through the same I have the following to share with you:
Make sure that the Bank Key,Bank Key - FI01 Bank master creation is maintained .....
>>>>>>>> Yes maintained.
After maintaining it,try to replicate using PFAL.
>>>>>>>> For replicating what "object type" should I choose from the list, though i couldn't find any of the drop down entries having "Bank" or likewise. hence what object type to select for replication?
And check in BD64 whether the distribution model is maintained correctly.
>>>>>>>> I checked but couldn't find the mention of any bank in the model views available there related to HR / CRM:: "HRALECRM" or "ZHRCRMWFM"...........hence kindly advise where and what for should I look for?
"................., it is possible that bank data is not distributed, because the system to which the bank data is to be sent is not available or the settings in Customizing are incomplete or incorrect. Check SPRO
>>>>>>>> Checked, system is maintained.
Thanks!
Tariq -
Equipment Replication Error from ECC to CRM
Hi,
We are trying to replicate the Equipments form ECC 5.0 to CRM 2007 facing some error in CRM like inbound queue is not generated and our queue generated with status SYSFAIL error massage is u201CBAPISTRUCTURE_NAME_UNDEFINIEDu201D. I checked in ECC out queue status is STOP. We are done the Material Master and Customer Master Data Replication form ECC to CRM successfully. Activated the Equipment related objectives and done the Initial Load we are facing the problem for Equipment.
Please advise me
Thanks in advance.Hi,
In the SAP Help of Equipment Replication from SAP ECC to SAP CRM following are prerequisites:
Integration
The initial download of data is triggered in SAP CRM and is executed by middleware. Uploads and delta downloads take place automatically when data is changed in SAP CRM and SAP ERP respectively.
To use this function you require the following releases, or higher:
■SAP CRM 7.0 (with active middleware)
■SAP enhancement package 4 for SAP ERP 6.0
You can have a look at the full help link @
http://help.sap.com/saphelp_crm70/helpdata/en/46/cc79505ec61525e10000000a114a6b/frameset.htm
Can you check the Bdoc Messages and mention the Error and the Status of the Queues of the Equipment Adapter Object EQUIPMENT.
Hope this will help.
Thanks,
Samantak. -
BUPA_MAIN replication error between ISU - CRM.
Hi Gurus,
BP replication between ISU(ECC) -> CRM because of below error.Please suggest me how can we get this processed if any one has experienced this problem before.In SMW01 Error detail got the below information.
*Number 148803306 already assigned to partner 1000962836 for ID type ID0003*
Message no. R1477
+Diagnosis:+
In Customizing the uniqueness of the ID numbers is designated as the identification category for the identification type. However the number in question has already been assigned to another partner for this ID type.
Regards,
RaviHi Ravi,
There are a lot of settings for replication of BP's between IS-U and CRM.
<removed_by_moderator>
Have you done Settings for Groupings and Number Ranges?
To ensure that business partner numbers are identical, you must create an external number range
with the same area for each internal number range (number range object BU_PARTNER) in the other
system. This external number range must then be allocated to a grouping (IS-U or CRM table
V_TB001; transaction SM30). During the data exchange, the system automatically selects a grouping
that is allocated to this number range.
Reagrds,
Vadim.
Moderator Warning: Please do not use the forum to distribute documents via mail. Instead please post this information in the wiki or SCN article system. The wiki stage is located here: https://wiki.sdn.sap.com/wiki/display/stage/Home
Edited by: Stephen Johannes on Oct 28, 2009 1:23 PM -
REplication of Material Master from ECC to CRM - NO_STRUCT_DEFINITION Error
HI CRM Experts,
I am trying to replicate master data for material from ECC to CRM. I have done the required customizing downloads. Done with downloading of DNL_CUST_PROD0 and DNL_CUST_PROD1. I have got the Material types in CRM with categories R3PRODSTYP, R3PRODHIER & R3MATCLASS. There is no filter setting in R3AC1 for MATERIAL. Now when I am trying to do initial down load for Material through R3AS and monitoring in R3AM1, the status shows running with Block = 0. Having checked in SMQ1, am getting error as System Fail with error Exception Condition with "NO_STRUCT_DEFINITION" raised.
I have checked with the Product structure in ECC and compared with R3PRODHIER in CRM. They are same.
Kindly let me know what am I missing out.
Regards,
Ravindra ValyHi,
I had applied the not earlier itself.
Lateron I realized that the note I had applied at CRM end. I have to apply at ECC end aswell.
After applying at ECC end, the problem is resolved.
Thanks
Ravindra Valy
Maybe you are looking for
-
ICal Calendar Colors Changing On Their Own; iCloud Connection
AGGRAVATING PROBLEM: Many in this forum have written recently about a problem ongoing for people with multiple iCal calendars where iCal calendar colors change "automatically" when you haven't selected those colors, or even "change back" before your
-
Hi, There is issue with date wise trial balance in sap, period wise i am getting, but could you please let me knew the T code for Date wise trail balance is standard SAP Thanks and Regards SAPUSER5
-
Error: Configure Portal Setup An error occurred while executing a custom action:_GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully
-
JavaFX Application won't start
When i start an example application e.g. LocalSearch i will get an error and the application won't start. Whatever i try, LocalSearch.jnlp or LocalSearch.html or another application from the javafx site, i see only the pretty java-gif-circle. It look
-
Session between 2 projects is null
Dear All; I have 2 different projects, 1 that handles login and security, and the other which handles data returned the data returned depends on session veriables that should be returned from the first application i have a created a link on the first