Cropping pictures with Viewer doesn't work.

Cropping pictures with Viewer doesn't work.
Selecting < or ~ 12 pictures. (picture size are Snapshots with iphone resolution) ->Viewers opens and display them. -> Russian roullette between cmd+k or the little crop button. No indication which one will process a crop or which not. -> Both result in picture selection disappear with no crop.
Selecting > 12 pictures. (picture size are Snapshots with iphone resolution) -> Viewer opens and display them. I crop them one by one with same Russian roulllette behavior between cmd+k or the little crop button. -> Closing Viewer. -> Pictures remain like they've been before. Not cropped.

I just tried what you described (although I can't really fathom why you would describe it as Russian roulette (with a variable number of L's). Unless you've been drinking a lot, which is what people are usually doing when they are playing Russian roulette. Your post was hard enough to decipher without that.
Anyway, my cropping was saved each time. I think there's something wrong with your Preview.app. Have you changed anything about the autosave functions of OSX?
I would try:
Boot into your recovery partition (restart, hold down ⌘R until you see the Apple logo), and use Disk Utility to repair your hard drive. Repair permissions too while you're there. OS X: About OS X Recovery
if that doesn't help, then I'd reinstall Mavericks over your current installation.

Similar Messages

I can't save pic. from net. "set your download location place as "Pictures"" That button doesn't work, or button for "browse" to send a file.

With my new browser i can't save pictures from net. I saw a question about changing file location. I can't, coz that button doesn't work. Also if i want to send a file, using mail or something, browser button for searching file doesn't work. Thanks.

I am using Firefox for several years and never had any problem. Since i update it to the new Firefox, problems start:
If i am trying to save a picture from ALL internet, it is not working. I am doing in the same way, like always: view image/save image as.... When i click it is not working, and all my screen doing like i make a refresh. I saw something strange files in temp after i am trying to save a picture, files with name like "etilqs" and some other letters after, the files are hidden. When i close firefox, files disappear.
If i am trying to send an e-mail with some files, button for search files in my pc, is not working, and when i click him, same thing with my screen. It is not about what kind of mail i am using, same problem if i want to attache a file on a site, even if i try to change files location in browser setup, like : options/general/save files to/... and i hit "browse..." button, same problem like i want to attache a file. Even here, if i want to use "ADD IMAGES" option, under is browse button, it is not working, same problem with my screen. Like is angry or something.

Just installed Firefox 5.0 and now my JS View doesn't work. Tried to re-install but no go. Any thoughts?

Windows XP. If it doesn't work is it possible that I can go back to Firefox 4?

Yes, that's it. I did try that before and then again after your response but still no luck. What I'm thinking is that the JS View 2.0.5 add on is not yet compatible with the new Firefox 5. If that's the case then I would hope that it will soon be compatible. The problem is that I actually use that every day and now I'm kinda stuck. Still open to any thoughts if you have any. I am willing to go back to Firefox 4 is that is still possible.

Row Fetch on View doesn't work / Custom procedure needed???

Hello guys!
Again I have a problem. It seems like once I finish one problem I stumble into another one. :-(
Would is breaking my neck is the following problem.
I have a view based on a query that joins 3 tables including one via a database-link. I would like and need to use that view as the source for the automatic row fetch! However, when creating the automatic-fetch-row process, the items on my page do not get populated. However, If I change the cource for the fetch-row-process to a view made of only a single table it works like a charm. Could it be that the automatic fetch-row procedure doesn't work with joined views and db-links at all??? If so, could you please give me an example of a PL/SQL procedure that will populate items on page reload and load!
It's extremely urgent and I appreciate every input!
Thanks guys! I hope you some ideas and hints!
Regards,
Sebastian

Ah, ok - I probably read too much into your update (still thinking that it was related to the "view" issue in your first post :) ) - so an INSTEAD OF trigger won't be needed if this is just a single table!
There are a few ways that adding an extra column into a tabular form would stop it being updated. Typically, this could be if the new column forms part of the "Primary key" for the data. If this is the case, you need to ensure that the processes recognise this. It can also be that you have set the item to DISABLED or READONLY - these items are not submitted with the page, so even if you set the item's value somehow, that will never get back into the record (there are ways to take off the DISABLED or READONLY attributes immediately prior to the submit, if need be). That could also happen if you have set the item to be a Standard Report Column - this is just displayed text, so doesn't form part of the submitted data. You can get around that by having a hidden column with the actual data in there as well - if you have ever created a tabular form using the simple EMP table example, you'll see EMPNO and EMPNO_DISPLAY - both contain EMPNO but only the basic EMPNO hidden item is submitted. Another, perhaps rare, possibility is if you have used the APEX_ITEM package to create any of the output and have used an index number that has been automatically assigned to another column - for example, if you have APEX_ITEM.TEXT(1, ....), which gives each item a name value of "f01", then this is most likely going to double up with the index for the hidden primary key item (which is usually first in the list). If this is the case, just change the index of your APEX_ITEM item to some high number (anything up to 50).
Finally, you say "INV_PT_ID_SUB is also bound to an item PTIDS" - what is PTIDS? The MRU processes need to understand what column to update and relies on the settings for primary keys and the column names in the SQL query.
The MRU's only know about their own settings - the workspace, tablename and primary keys etc. They contain no details of individual columns as such, so adding in extra columns shouldn't be a problem. In fact, I've added/deleted so many columns from tabular forms, that I'd be really annoyed if I had to start from scratch every time!!
Andy

Mighty Mouse - scrolling to zoom view doesn't work in Photoshop CS, why?

I just got my new G5. Apple's new Mighty Mouse doesn't seem to work right with the main apps I use. You can't use the scroll wheel to zoom the view, in either Photoshop or Cinema4D (3d app). I tried turning off horizontal scrolling in hopes that it would fix the problem. Nope. No zoom. Can you remove the Might Mouse driver so it is just a two button/vertical scroll mouse?
Quad G5, 1.2ghzPowerlogic Quicksilver, 800iBook Mac OS X (10.4.3)
733Quicksilver, 800iBook Mac OS X (10.2.x)

Doh! I thought that was on by default. It still doesn't work in my 3d app though, but I found out that is a know issue and the latest update should fix it. Thanks for your help.

Design View doesn't work on fresh cs5 install

I just bought CS5 web premium and installed all of the programs. For some reason design view in Dreamweaver doesn't work for any of my sites. It's just a grey background. I can work in code view, but I can't do anything with the design view, it's just a grey dead pannel. I had installed the trial version last month and it worked perfectly which is why I bought the full version. I uninstalled the trial version of Dreamweaver CS5 and installed the new CS5 and now the design view is dead. I tried reinstalling CS5 again but Design View is still dead. Any ideas?
Thanks,
DC

Hi DC,
I read you post, and now I wondering If you could help me with my problem.
I also recently purchased CS5 web premium and are having problems with the Preview option.
If you are using a local server for testing purposes, could you please read my posts on this forum:
Have a problem with preview CS5
(it's posted just above your own post)
Many thanks in advance,
Lpre

Printing PDDoc with AFExecuteThisScript() doesn't work after an upgrade from SDK 5 to SDK8

Hello,
I have made an upgrade of my plug-in which was developed with the Acrobat 5 SDK. I upgrade it to Acrobat 8 SDK and my print function doesn't work anymore.
Actually I print my document using a javascript trusted function instead the function provided by the C++ library for internal reason.
Here below is the code used to print my document :
char szJavaPrint[6000];
sprintf(szJavaPrint,
"pp = this.getPrintParams(); \r\n"
// fill pp with parameters
"pp.interactive = pp.constants.interactionLevel.silent; \r\n"
"\r\n"
"this.trustedPrint(this, pp);"
PDDoc pdDoc = AVDocGetPDDoc(avDoc);
AFExecuteThisScript(pdDoc, szJavaPrint, NULL);
It was working with the Acrobat 5 SDK but the print seems to have no effect using the Acrobat 8 SDK. I know that there is a change between Acrobat 5 and 8 concerning the Character Set (currently I set the Character Set to "Not Set" in the Configuration Properties of the project) but I don't think that my problem comes from the Character Set.
All ideas to resolve this problem are welcome.
Kind regards,
Joe

See what happens if you remove the "setting of interactive to silent"...
There is a restriction on silent printing in Acrobat, but I would not have expected that to be passed into this method - but it could have been overlooked and be a bug.
Also, I don't recall a trustedPrint() method in Acrobat JS - check the documentation for the correct name of this function...

After upgrade to IOS 8.3 sync with iTunes doesn't work

After upgrade iPhone 6, iPad Air to IOS 8.3, the sync (over wifi, as well) to iTunes doesn't work anymore.
On iMAC iTunes, the last sync's hour and day appear different from what is recorded on mobile devices (iPhone and iPad); with IOS 8.2 and the previous iTunes' version the sync worked correctly: the dates are the same only for few seconds after syncronization, then the IOS devices show the syncronization's dates related to two weeks ago.
Thanks

you'll need to contact your carrier.

Fit the window with mouse doesn't work after new update 10.9.2

Hi, I could fit a windows using my mouse wheel or two finger(on trackpad), doesn't work after I set up new Mavericks update(10.9.2) I'm using Haswell rMBP. Can anyone help me please? Thanks a lot. (Also, minimize with mouse wheel doesn't work too.)

Doesn't anyone having this issue?

Export reports views doesn't work

export the report view's in a file doesn't work. The file is created but still empty. Workaround is to get the sql and execute it in worksheet edit and cut and past the result in a excel sheet. It woul be better if the export works fine.

This is working fine for me.
What version of SQL Developer are you using?
What OS are you on?
What report did you run?
What type of output did you select?
-- Sharon

Synchronization of tasks and interaction logs with Outlook doesn't work

Dear SAP Experts,
I'm workink on CRM 7.0 (release 7.7.06.010).
We are trying to make the synchronization of activities, contacts and tasks from our CRM system to Microsoft Outlook.
It's working fine for the contacts and for the Apointment BP visit (transaction type Y020).
But no synchronization made for others activities (interaction log Y007 and telephone calls PCAL) or BP Tasks (Y030) we created in the system.
We just applied today SAP Note 1415263 and Groupware Integration 3.057.
I made the settings in the CRM Calendar tab in Outlook (with synchronization from CRM to Outlook), and checked apointment, contacts and tasks.
In customizing (CRM > Transactions > Basic settings > Define transaction types), I flagged for the following transaction types the little 'Calendar' box: Y020, Y030, Y007 and PCAL.
In another entry (CRM > CRM Middleware and related components > Settings for client-based synchronization), I indicated the transaction type Y020 for DEFAULT_APPT_PROC_TYPE and Y030 for DEFAULT_TASK_PROC_TYPE.
Any idea about what is missing or not already done?
Any help will be apppreciated.
Thanks in advance for your help,
Kind regards,
Grégory KREMSER
Edited by: Grégory Kremser on Feb 3, 2010 3:13 PM

We don't have a CAS array set up. We want the fail over to be fully manual and only fail over to another server when mb1 is in a completely failed state and won't be back up and running withing a set time frame. We can get everything working
on MB3 and only Outlook doesn't work when everything is on MB2. Outlook also doesn't work if databases are on another server and DNS is pointing Outlook to MB2 (again MB3 works fine).

PDF viewer doesn't work in FF 36.0.4 for Mac

Macbook Pro with Yosemite and FF 36.0.4: Built in PDF viewer no longer works. Clicking on PDF links in search engines does not bring up the built in viewer.
Restoring FF 35 restores the PDF viewer.

I understand that the PDF viewer in Firefox is no longer working. I have reset the application settings for the pdf file mimetype in the Firefox Application settings.
*[[Applications panel - Set how Firefox handles different types of files]]
If the default continues not to work after resetting this setting, please check out a work around:
In order to change the default reader for PDF files (to not open PDF files with Firefox's internal PDF reader), follow these steps:
#Click the menu button [[Image:New Fx Menu]] and click Options (Preferences for Linux and Mac).
#In the Options (Preferences for Linux and Mac) window, select the ''Applications'' panel.
#In the ''Search'' field, type ''PDF''. You should find ''Portable Document Format (PDF)''.
#On the right hand side you should find an ''Action'' column. Use that to select your favorite PDF reader. In order to view PDF files in Firefox, choose ''Preview in Firefox''.
Did this fix your problems? Please report back to us!
Thank you.

My Help Viewer doesn't work properly-The selected topic is currently unavailable Make sure you're connected to the Internet. For help connecting, choose Apple menu System Preferences, click Network, and click "Assist me." If you're connected to the Inte

Sometimes just closing and reopening the Help window will clear up the problem. If it doesn't, log out or restart the computer and try again. Otherwise, you may need to delete the Help cache.
Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
~/Library/Caches/com.apple.helpd
Right-click or control-click the highlighted line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A Finder window should open with a folder selected. Move the selected folder to the Trash. Log out, log back in, and test. Help pages will be slow to load at first.
If that doesn't work, the problem may be caused by network conditions. It may go away by itself, though I can't say how long you should wait.
A persistent failure to load help data has been reported as an issue with satellite networks. Test on a different network, if possible. I've also seen at least one report that Photo Stream in iCloud can mysteriously interfere with Help. I'm not sure whether that's true, but try disabling Photo Stream, if applicable.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Powerdns with MySQL doesn't work

I recently switched from ubuntu to Arch and I love it. However I have problems with PowerDNS running with MySQL database. When I set pdns.conf to
launch=gmysql
gmysql-host=127.0.0.1
gmysql-user=user
gmysql-password=pass
gmysql-dbname=database_name
and restart pdns i get this error:
Oct 22 22:43:34 Archlinux pdns[3337]: Caught an exception instantiating a backend, cleaning up
Oct 22 22:43:34 Archlinux pdns[3337]: gmysql Connection failed: Unable to connect to database: Lost connection to MySQL server at 'reading initial communication packet', system error: 0
Socket connection doesn't work either.
If someone could help me out of this I would be very happy.
Best regards!
Jernej

It works! Thank you! Thank you! Thank you!
I wasted so many hours combating this...
I owe you a beer byte! Thx again!

'Alt' with + or - doesn't work

The adjustment increment of several of the sliders is supposed to be reduced by holding the Alt key down while the + or - key. This doesn't work on my system. I've tried tested both Alt keys with both + and - keys on my keyboard. No luck. All I get is the Windows error tone. Using the Shift key to increase the adjustment increment works as it should. Any ideas out there? TIA, njb

I consider it's working OK on Windows
But it's platform dependent !
To resume :
Windows + and - give small increments , shift and + and - give big increments
Mac + and - give big increments , alt and + and - give small increments.
And the Martin Evenings book is the best LR book for me, though here he's may be not clear enough.

Cropping pictures with Viewer doesn't work.

Similar Messages

Maybe you are looking for