CRS 4 Database replication in progress

Hi,
I have CRS 4.0 cluster of 4-servers
two CRS Engine [Redundant] and two CRS database[Redundant]
The issue is now I'm facing this error in event viewer
FCVRS229 SQL Query failed with SQL error could not execute the SQL statement for query INSERT INTO FCRasStateLogToday
Cisco recommend the action in this URL
http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_tech_note09186a00801df570.shtml
But I found all is ok as per the URL
When checking the Enterprise manager in the 2-Database servers, the main and the secondry
On the secondry I found the subscription status is Running and last action is Synchronization in progress
Cisco have a Doc for manually repair this issue for CCM 4.1
But I can't find a Doc for manual repair on CRS 4.0
So Could some one help with any Doc or recommendation for this issue as I don't need to loss my data when deleting and creating this subscriptions again
The problem that I still don't understand is that we have the issue with the main database server , when removing it from the network , the agents work normally with the Secondry Database server. But when removing the Sec Database and trying with the main. The problem still exist with the agents
I expect the issue should be with the Secondry not the primary as I'm finding
Regards

I think I find there is a space issue in the FCRasSvr DB which mean I should do shrink for the DB
I find this good link
https://supportforums.cisco.com/thread/2099846?referring_site=kapi
So is it only to right click on the DB then shrink and he'll ask me what to shrink ?
Also to tuncate these tables:
truncate table FcRasStateLogToday
truncate table FcRasRecordLog
truncate table FcRasCallLogWeek
truncate table FcRasCallLogToday
MSmerge_tombstone (this one will clear up most of the data)
Do I need to do anything before shrink as to stop replication or backup anything
Any one tried this shrink before, will be any draw backs for this step ?
Regards

Similar Messages

Cisco UP Replication Watcher has detected that database replication is still in progress

Hi Guys
In the Presence server System Troubleshooter, have the follow message:
"Cisco UP Replication Watcher has detected that database replication is still in progress"
Any idea to solve this?
TIA
Cristian

was this ever fixed? and if so how?

Stuck at "Clone database creation in progress...."

Anyone could please tell me why?
I've tried to install Oracle9i on Solaris8...by its Default Configuation via ./runInstaller (GUI)
I just fill DB name....
,but now I stuck at "Creating and starting Oracle instance"(that is,Clone database creation in progress,50%)

Hi,
have u follow all required steps before starting the installation?
Takes help from tahiti.oracle.com site.
if u r not getting any sucess then restart the installation and this time install it without creating the database.(choose software only option).
after completing the installation ,create the database by dbca tool and choose custom option.
Thanks
Kuljeet

"clone database creation in progress" hangs

I am attempting to install Oracle 9i personal on an XP machine. When the install gets to "clone database creation in progress, it hangs. I cannot successfully stop that part of the install. I have to click the close button at the top right of the window to stop the install. I found the installActions.log in which I found the following:
Unable to read C:\Oracle\Inventory/Contents/OracleHomesList.ser. Some inventory information may be lost.Unable to read C:\Oracle\Inventory/Contents/LibsList.ser. Some inventory information may be lost.
The installer version is 2.0.1.6.0
and
# Not all the dependencies for the component Oracle Starter Database 9.0.1.0.1 are found. Missing Component oracle.rdbms.seeddb.compoltp 9.0.1.0.1.
# Not all the dependencies for the component Oracle Starter Database 9.0.1.0.1 are found. Missing Component oracle.rdbms.seeddb.compdss 9.0.1.0.1.
Does this tell me anything useful? Can anyone give any advice?

Hi, I am new to the Oracle Database. I had recently installed Oracle 9i (9.2.0) on Redhat 9 a couple times and everytime the installation hung at the "clone database creation in progress (46%)" stage. I had also tried to install 9i with software only then use "dbca" to create database but still hung at the exact same stage. Installation of my 9i was from the hard-disk; my PC has 256MB of RAM but I gave 2GB of space to swap. I had a successful installation of Oracle 9i (9.2.0) on SuSe Enterprise 9 and the DB was running smoothly. Can anyone please give me some idea on how to resolve this problem? Your help is greatly appreciated!

SCCM 2012 Database Replication Monitor Child Site Details Empty

We have a Secondary site for which no data will show up under Monitoring/Database Replication/Replication Status/Child Site. It just states "No items found." as seen in the attached pic. All other secondary sites show various configuration parameters,
etc. on the Child Site tab. What is blocking CM 12 from getting this information for this particular child site? Any ideas? Something firewall or access related maybe?

was there any solution to this? I am having the same issue with the same version of Config Manager.

ACS 4.2 Database replication issue

Hello Experts,
Hope you are all doing well. I need your help in ACS database replication, I want to do replication between ACS servers. The issue i am facing is that there is no error in ACS replication log. It just says outbound replication started. and sits there no other error message is shown. I can successfully telnet secondary server's destination port 2000. But when i hit the replication button from primary server, i do not observe any hit count on my ASA ACL on which i allowed tcp 2000 for destination secondary server.I also checked my syslog server if there is any traffic denied between these 2 ACS servers but found nothing. I also did wireshark captures on the interfaces but no traffic is initiated when i press replicate now button. Initially i thought its a machine issue, but same behavior is shown when i swapped primary----to secondary. There are other applications running on both the servers which requires JAVA. Like Cisco IME etc. Can it be JAVA issue? Please help me out. i am using Release 4.2(0) Build 124 on both servers.Attached below is the Replication LOG snapshot,
Regards,
Rizwan.

https://supportforums.cisco.com/discussion/11382366/problems-witch-acs-42-replication
https://supportforums.cisco.com/discussion/11363046/replication-problem-acs-ver-42

ACS Database Replication over VPN with overlapping Network Addresses

We currently have two co-locations each situated in different provinces. We have two ACS servers which we want to deploy at each co-location. All our network equipments are behind PIX/ASA devices. Getting them to replicate over the VPN should be easy but in our case we have overlapping Network Addresses at both ends of the tunnels.
As per Cisco data does not transit a NAT device when the two Cisco Secure ACS servers communicate and a successful database replication can occur only if the secondary ACS server perceives no change in the IP header or content of the data it receives. So that means we will not be able to Implement NAT to achiever this.
Has any one of you faced this problem of replicating ACS Database over the VPN with overlapping Network Addresses and was anyone able to successfully solve this issue using a work around ?
All provided info and comments are greatly appreciated.

I can help with the 3005 setup if you decide to go that route.
You will need to add 2 network list entries under Configuration>Policy Management>Traffic Management>Network Lists.
You will need to configure a local and remote address. The local will be one of the public ip's for the site.(Provided by your ISP)The remote will be the device you are connecting to on the other end.
You will also need to add a Nat Lan to Lan rule under Configuration>Policy Management>Traffic Management>Nat>Lan to Lan.
Use a static Nat type. The rest will look similar to my example.
Source(Local address)Translated(Public Ip Address used in the network local list)Remote(Ip address of the device on the other end)
Now just create an Ipsec lan to lan tunnel. You will need to agree with the ISP on des type and auth type. Use you local and remote networks you created earlier.

Problem in Database Replication in Oracle 9i

i am trying to do database replication but am facing problems in 9i.i have two machines on network and both have a database created.i also have a common schema in both the database (testuser is the name of schema). i have created database links between the two machines and when i check the link through OEM console then it shows that database link is active.when i add object to my master group it shows the status as need generation and when it try to generate replication support for the same the status changes to DOINGGEN.i am not able to get the status to GENERATED.my database names on both machines are different.could that be a problem.do we need to have same database name on both machines.plz help me out with this and if possible give me step wise details of how to do replication.i have tired it by following the steps given in oracle documentation.

use enterprise edition, i think you are using standered edition. moreover there should be primary key column in replicated tables.

CiscoSecure ACS 4.1(1) Build 23 Patch 5 :database replication fails; possibly short timeout or dead

Hi,
Since some time we are struggling to get database replication working.
On the primary server it is reporting the following on "Database Replication active.csv""
07/21/2010
14:22:58
SZ0910
WARNING
ACS 'SZ0920' not replied to replication request - possibly short timeout or dead
07/21/2010
14:12:08
SZ0910
INFO
Outbound replication cycle starting...
In CSMon.log following is logged:
CSMon 07/21/2010 14:12:11 A 1544 13760 Pausing the monitoring of CSAuth for duration 600
CSMon 07/21/2010 14:12:11 A 1544 11640 Pausing the monitoring of CSLog for duration -1
CSMon 07/21/2010 14:12:14 A 1544 13788 Pausing the monitoring of CSRadius for duration -1
CSMon 07/21/2010 14:12:18 A 0641 3248 CSAuth: Paused State 0 6 Event Detected Level:2 Message:Service CSAuth has been suspended for a configured function to proceed. Monitoring will suspend until the service is restarted
CSMon 07/21/2010 14:12:18 A 0641 3248 CSLog: Stopped State 0 6 Event Detected Level:2 Message:Service CSLog has been stopped or paused by the system. Monitoring will suspend until the service is restarted
CSMon 07/21/2010 14:12:18 A 0641 3248 CSRadius: Stopped State 0 3 Event Detected Level:2 Message:Service CSRadius has been stopped or paused by the system. Monitoring will suspend until the service is restarted
CSMon 07/21/2010 14:12:18 A 1544 7716 Pausing the monitoring of CSTacacs for duration -1
CSMon 07/21/2010 14:12:28 A 0904 3248 Analysis: Level 2 'Service CSAuth has been suspended for a configured function to proceed. Monitoring will suspend until the service is restarted. Service CSLog has been stopped or paused by the system. Monitoring will suspend until the service is restarted. Service CSRadius has been stopped or paused by the system. Monitoring will suspend until the service is restarted. '
CSMon 07/21/2010 14:12:33 E 0351 3248 Failed to log accounting packet to logger localCSLog
CSMon 07/21/2010 14:12:33 A 0641 3248 CSTacacs: Stopped State 0 2 Event Detected Level:2 Message:Service CSTacacs has been stopped or paused by the system. Monitoring will suspend until the service is restarted
CSMon 07/21/2010 14:12:43 A 0904 3248 Analysis: Level 2 'Service CSTacacs has been stopped or paused by the system. Monitoring will suspend until the service is restarted. '
CSMon 07/21/2010 14:12:48 E 0351 3248 Failed to log accounting packet to logger localCSLog
CSMon 07/21/2010 14:22:18 A 0641 3248 CSAuth: State 0 6 Event Detected Level:4 Message:Service pause timed out. Please check the timeout settings for Replication and Backup
I have followed this checklist: https://supportforums.cisco.com/docs/DOC-8795 to make sure configs are ok.
But still replication fails.
There is no firewall in between.
Both ACS servers running on MS Windows Server 2003, SP2.
Can anybody help me in the right direction what could be possible cause of this or where else I can look for logging for further troubleshooting?
Thanks in advance for your help.

Hi,
Since some time we are struggling to get database replication working.
On the primary server it is reporting the following on "Database Replication active.csv""
07/21/2010
14:22:58
SZ0910
WARNING
ACS 'SZ0920' not replied to replication request - possibly short timeout or dead
07/21/2010
14:12:08
SZ0910
INFO
Outbound replication cycle starting...
In CSMon.log following is logged:
CSMon 07/21/2010 14:12:11 A 1544 13760 Pausing the monitoring of CSAuth for duration 600
CSMon 07/21/2010 14:12:11 A 1544 11640 Pausing the monitoring of CSLog for duration -1
CSMon 07/21/2010 14:12:14 A 1544 13788 Pausing the monitoring of CSRadius for duration -1
CSMon
07/21/2010 14:12:18 A 0641 3248 CSAuth: Paused State 0 6 Event Detected
Level:2 Message:Service CSAuth has been suspended for a configured
function to proceed. Monitoring will suspend until the service is
restarted
CSMon 07/21/2010 14:12:18 A 0641 3248 CSLog: Stopped State
0 6 Event Detected Level:2 Message:Service CSLog has been stopped or
paused by the system. Monitoring will suspend until the service is
restarted
CSMon 07/21/2010 14:12:18 A 0641 3248 CSRadius: Stopped
State 0 3 Event Detected Level:2 Message:Service CSRadius has been
stopped or paused by the system. Monitoring will suspend until the
service is restarted
CSMon 07/21/2010 14:12:18 A 1544 7716 Pausing the monitoring of CSTacacs for duration -1
CSMon
07/21/2010 14:12:28 A 0904 3248 Analysis: Level 2 'Service CSAuth has
been suspended for a configured function to proceed. Monitoring will
suspend until the service is restarted. Service CSLog has been stopped
or paused by the system. Monitoring will suspend until the service is
restarted. Service CSRadius has been stopped or paused by the system.
Monitoring will suspend until the service is restarted. '
CSMon 07/21/2010 14:12:33 E 0351 3248 Failed to log accounting packet to logger localCSLog
CSMon
07/21/2010 14:12:33 A 0641 3248 CSTacacs: Stopped State 0 2 Event
Detected Level:2 Message:Service CSTacacs has been stopped or paused by
the system. Monitoring will suspend until the service is restarted
CSMon
07/21/2010 14:12:43 A 0904 3248 Analysis: Level 2 'Service CSTacacs has
been stopped or paused by the system. Monitoring will suspend until the
service is restarted. '
CSMon 07/21/2010 14:12:48 E 0351 3248 Failed to log accounting packet to logger localCSLog
CSMon
07/21/2010 14:22:18 A 0641 3248 CSAuth: State 0 6 Event Detected
Level:4 Message:Service pause timed out. Please check the timeout
settings for Replication and Backup
I have followed this checklist: https://supportforums.cisco.com/docs/DOC-8795 to make sure configs are ok.
But still replication fails.
There is no firewall in between.
Both ACS servers running on MS Windows Server 2003, SP2.
Can
anybody help me in the right direction what could be possible cause of
this or where else I can look for logging for further troubleshooting?
Thanks in advance for your help.
Hi,
Also check the port number TCP 2000 this is the replication port which needs to be opened between the primary and secondary ACS.
Hope to Help !!
Ganesh.H

ACS 4.2 to ACS 5.4 database replication

Hello All,
I would like to know if its possible setup database replication from Cisco ACS 4.2 server to ACS 5.4 server ?
Thanks in advance
Mohsin Saleem

Unfortunately, database replication (trigger update) cannot be performed as it requires both the ACS boxes to run same code.
If you meant migration then yes that can be done.
Migrating from ACS 4.x to ACS 5.4
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.4/user/guide/migrate.html
Jatin Katyal
- Do rate helpful posts -

Problem with ACS 4.2 Database replication

Greetings,
I am not able to replicate Database between two ACS SE 4.2. I am getting the following error:
Inbound database replication from ACS 'ACS_BEX_001' denied - shared secret mismatch.
The configuration apparently is ok. I am attaching the configuration from both ACS.

The solution posted by Nevin is correct, but I must add some explanations. I had the problem yesterday and I proceeded like Nevin told:
- I connected to the console and made a "show".
- The IP was the correct one, but as indicated I made a "set ip"
- The system asked for the new IP, showing the old one between brackets: ie "New IP [10.10.10.1]:"
- I pressed Intro, because the IP is correct.
- After confirming the IP, mask, gateway and DNS the system asked me to verify connectivity. I did it and was correct.
- The second time it asked to check connectivity I answered No. and nothing happened.
- We checked through the web but the "Self" IP was still 127.0.0.1.
- So I made the process again BUT this time I changed the the IP to another one. After finishing, (when I answered No to check connectivity) I saw that the system was stopping all ACS processes and starting then again.
- In the web page the "Self" IP was the new one.
- I made the process again changing the IP to the original one. This time also the system stopped and started all processes.
- In the web page the "Self" IP was correct.
- Now the replication worked correctly.
So the problem was that the system is "inteligent" and if it discover that you don't change the IP (even if you change the DNS), it doesn't reconfigure it. So you must change to another IP (even a dummy one) and the change again to the correct one.
I hope this can help to other people.

OC4J 10.1.3 preview 4 cluster database replication is not working...

Hi,
We are trying to run OC4J 10.1.3 preview 4 standalone server in a cluster mode enabling database replication to persist session details during restarts.
We have created the following:
- JDBC Connection pool
- JDBC data source
- An entry in the application.xml for <cluster><protocol><.... </cluster>
But it does seem to be working.
And there is no change in stdout or stderr console log as well.
It will be really helpful if you send your comments or answers if anybody have have implemented this succefully before!!
Regards,
DGKM

gday DGKM --
I can confirm that this works with the DP4 build.
The easiest way to make sure you get the right entries are to configure this via the "clustering" wizard in Application Server Control at the end of the deployment process.
So I'd recommend deploying the application again using ASC and using the cluster task, setting the protocol to be Database and specifying the datasource to use.
cheers
-steve-

Database Replication

Hi,
what would be the perfect answer if any one ask what are the methods of database replication.
I really have doubt about the replication.
Is it cloning of existing DB using cold backup, RMAN uutility or exp/imp
OR
Is it disaster recovery solution like dataguard, RAC or stream.
Regards,
DevD!

user12138514 wrote:
Hi,
what would be the perfect answer if any one ask what are the methods of database replication.
I really have doubt about the replication.
Is it cloning of existing DB using cold backup, RMAN uutility or exp/imp
OR
Is it disaster recovery solution like dataguard, RAC or stream.
Regards,
DevD!Hi DevD
The best answer as always comes from Oracle docs. Please refer to the following doc:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14226/repoverview.htm#sthref8
Replication is the process of copying and maintaining database objects, such as tables, in multiple databases that make up a distributed database system. Changes applied at one site are captured and stored locally before being forwarded and applied at each of the remote locations. Advanced Replication is a fully integrated feature of the Oracle server; it is not a separate server.
Replication uses distributed database technology to share data between multiple sites, but a replicated database and a distributed database are not the same. In a distributed database, data is available at many locations, but a particular table resides at only one location. For example, the employees table resides at only the ny.world database in a distributed database system that also includes the hk.world and la.world databases. Replication means that the same data is available at multiple locations. For example, the employees table is available at ny.world, hk.world, and la.world.

ACS SE Database replication fails

Hello, I recently upgraded our ACS SEs from 4.0 to 4.1. All appeared to go OK but I checked the logs recently and saw the the database replication is failing with the message:
ACS '[hostname]'is running a different version of ACS - aborting.
All ACS SE were upgraded at the same time and display the same versions when examining the Appliance Upgrade page. Does anyone have any ideas what the problem is?
Thanks in advance.

Hi, I am having a related problem but in my case I am using ACS for Windows ver.4.0. I am replicating from one primary ACS to three other ACS using scheduled nightly replication.
The problem is that the data is being updated on all three ACS servers, but in the database replication logs on the primary I get messages stating that "ACS-server-name replication failed possibly due to short time-out or dead". Moreover, not all three servers timeout. Sometimes one server timeout, and other times two servers timeout, etc.
On the replicated servers logs, the only log, in case server times out, shows that "replication cycle starting....". while when replication is successfull, it also shows Replication cycle completed successfully.
I have played around with the timeouts but the result is random. I have also checked if there are any bandwidth issues, but replication is scheduled at night with minimal network traffic and the servers are also not being used for authentications.
Don't understand why I don't see successful messages all the time, specially when the data does get updated on the replica ACS.
Thanks.
MAG

ACS internal database replication

I have setup ACS internal database replication and it works once then the secondary config is overwritten and doesn't contain the AAA server of the primary.
primary - 10.100.253.25
ACS 1113 running 4.2
secondary - 10.100.253.26
ACS 1113 running 4.2
Example of before and after
Before replication
The primary has these AAA servers listed under network components.
self - 127.0.0.1
acs2 - 10.100.253.26
The secondary has these AAA servers listed under network components.
self - 127.0.0.1
acs1 - 10.100.253.25
After replication
The primary has these AAA servers listed under network components.
self - 127.0.0.1
acs2 - 10.100.253.26
The secondary has these AAA servers listed under network components.
self - 127.0.0.1
acs2 - 10.100.253.26
therefore after the first replication subsequent attempts will fail because the secondary won't accept attempts from unknown AAA servers. Is this to be expected or can I mitigate it in someway?

Please try setting the original ip address by using "Set ip" Command from the console connection of the ACS Solution engine. Once you successfully changed the ip address, you can apply the patch 11 or above (latest is patch 16) on the ACS SE (This will fix the problem).
In majority of cases set ip command fails but sometime works too.
In case it doesn't help then we have 2 options:
1.] Open a TAC case, send the database file to delete the entry.
2.] If you are not intrested sending your database then try the below listed steps:
In order to remove the loopback entry from the Database, we need to follow following steps,
Please download ACS 4.2 trial from following link, if you do not have ACS Full version for Windows purchased.
http://www.cisco.com/cgi-bin/tablebuild.pl/acs-win-eval- eval-ACS-4.2.0.124-SW.zip
[1] Install eval version on Windows 2000/2003 server. Please also ensure that JAVA is installed on that server.
[2] Take a backup from ACS SE from, System Configuration > ACS Backup >Backup Now.
[3] Restore the database backup on ACS eval.
[4] On eval ACS , go to Network Configuration > find the AAA Server entry with 127.0.0.1 entry. Edit it and give it some other IP for
example, 1.1.1.1. Submit + Apply.
[5] On eval, Restart CSAdmin service.
[6] On eval, go back to Network Configuration and search for the changed IP address and delete that entry, Delete + Apply.
[7] Take a backup from eval ACS, System Configuration > ACS Backup > Backup Now.
[8] Restore the database backup from eval ACS into ACS SE from option, System Configuration > ACS Restore, choose the database backup. Check Check option "User and Group Database" and "CiscoSecure ACS System Configuration", then press Restore Now.
[9] On ACS SE, go to Network Configuration, make sure that 127.0.0.1 entry is not there and for ACS SE's hostname we have the correct IP address. Go to Proxy Distribution Table > (Default). Move the server’s hostname entry that has correct IP for this ACS SE into "Forward To" column, if not already. Then press "Submit + Restart".
Reference defect, CSCso36620 - Toggle nic command changes AAA server ip address to "127.0.0.1" in GUI.
Regards,
Jatin
Do rate helpful posts-

CRS 4 Database replication in progress

Similar Messages

Maybe you are looking for