Crystal 10 Shuts down when saving to enterprise Server

When I do a save in Crystal 10 it simply Shuts down with no error message or anything ONLY when saving to enterprise Server any thoughts on what it could be
newbie here

What version of Enterprise are you saving to and if they are the same major version are they the same patch level?
Check with the CE administrator to make sure you have rights to save to Enterprise.
Thanks
Don

Similar Messages

InDesign Shuts Down When Saving

InDesign CS3 5.0.2
InDesign shuts down when saving a file. The ONLY time it seems to act up is when we try to save using any option except for "save a copy." There are no numbers, messages, etc. outside of the standard: "InDesign has encountered a problem and must shut down. We apologize for any inconvenience..."
When it does shut down, whatever file was open at the time is lost. Totally. I have yet to be able to locate the previous file using any means.
Has anyone else had this problem. Any fix?

Normally I would recommend replacing your preferences as a first step. I'm not sure quite how to test, though, without putting something at risk.
Maybe replace the prefs, open a new file that won't matter, save a copy, then try a save as and see what happens. You might also try turning off video hardware acceleration, but that seems tenuous, as does a bad font.
Is there a network involved, or are you working locally? If yes, what kind of network? Have you tried working locally?
If none of this has any effect you may need to reinstall, but I hate to put anyone through that pain without a better idea of what the problem is.
Peter

Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,, Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,, Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
I can open the RAW file only if I restart my computer - very annoying!
However, thanks for the advice about the video card & memory.
So, I'm still stuck as to what the issue is.

Crystal Reports shuts down when trying to use the Add Command feature

I am using Crystal Reports 9 with and Oracle database. I go to new report, as a blank report, new connection to oracle, double click add command, paste the sql and click ok and crystal shuts down at that point. Any one have this happen before?? Please help??

Hi Allison,
Have you tried with basic syntax at command level.
If you face any problem using Add command in crystal designer, just try to reinstall the product.
Regards,
Naveen.

Server Shutting down, when the Concurrent Users are more

Hi,
We are working on EP 5.0 SP5, our problem is that if the concurrent users are more automatically our LDAP or Portal is shutting down (approximately 300 or above..).
For this problem where we have to check? help can be appreciated...
Regards,
Sudhir

Hi,
If you portal is shutting down when it is getting a high load I would look at the memory settings defined in the configtool (if you are using a service or the startupframework) or the go.bats if you are running them manually. I would assume that the problems comes from the java process not being able to get enough memory, so try increasing the heapsize parameter Xmx (?)
See notes
597187
696410 (for EP6 but content and related notes should be relevant)

Crystal Reports published on Business Objects Enterprise Server

Hi all,
I am having a few difficulties after i save my crystal report to the Business Objects Enterprise Server XI 3.1.
1) for the reports with static parameters the "Crystal Reports Print Control" doesbnot work. It gets stuck and i guess cannot load the print function. Don't know what exactly causes it but i made two similar one field reports and saved them to the server. One with a dynamic parameter and the other with a static parameter.
The report with static parameter could not be printed.
This happens when i use the HTML viewer for crystal reports. I cannot use the activeX or Java viewers as they mess up the formatting of my Arabic reports.
2) For some reports i get one type of parameter screen (like we get while running through the designer) while for other reports i get a different type of Parameter Entry Screen. Sometimes when i view the report first time i get the former type of parameter screen and when i refresh the report i get the later screen.
3) Also my dynamic parameters are not showing all the values when the reports are saved to the above mentioned server. On my desktop i made the LOV registry tweak and it works fine. I did the same tweak on server registry but it is not working.
Thanks a lot even if u read it

Moved to BOE forum

Computer shuts down when I click on the list or grid display button

I've uninstalled an reinstalled 3 times and instead of the computer shutting down when I start itunes as it was doing, it only does it when I click on the display as a list, grid or cover display button. However it seems to unistall some parts at the same time as I can't open it all afterwards (error message says its not installed). This started to occur after a couple of weeks of non use and when I last used it I purchased songs from itunes. I now have current version but didn't when it first statred to happen. Help!!

Okay ... we'd better have a closer look at the minidumps the PC has been producing to see if they can turn up any additional information on what we're dealling with here.
Open "My Computer", and see if you can find a directory called C:\Windows\Minidump. (That's where minidumps usually go on a PC, so long as the Systemroot hasn't been set to some other folder.)
If it's been collecting minidumps, there should be files in there with names like "Mini(number-numbers).dmp"
(If you have "Hide filename extensions for known file types" enabled in Windows, the ".dmp" extension may not appear on the dump files. The numbers in the file name will be different for each minidump, if minidumps are present.)
Once we've tracked down some minidumps, we can have a go at analysing them.
1. Download and install the Windows debugging tools from here:
http://www.microsoft.com/whdc/devtools/debugging/installx86.mspx
2. Go to Start, All Programs, Debugging Tools For Windows, Windbg
Once you open Windbg, you will presented with a blank screen.
3. Click on "File > Symbol File Path". Here you will enter the symbols
path. Symbols are needed to effectively debug.
The path will be:
SRVc:symbolshttp://msdl.microsoft.com/download/symbols
4. Enter in this path and click OK. Now, go to "File > Save Workspace"
so that your symbols path is saved for future use.
5. Go to "File > Open Crash Dump" and load the file.
(An "Open Crash Dump" screen will appear ... doubleclick "My Computer", doubleclick "Local Disk", doubleclick "Windows", doubleclick "Minidump", and doubleclick on one of the minidumps in there.)
You will/should get a message to save base workspace information. Choose no.
Now you will get a debugging screen. It takes a little bit to run it,
as the symbols have to be downloaded as they are needed.
After the "bugcheck analysis" part of the screen comes up, look for the component that seems to be causing the crash. (It'll say "Probably caused by" ...)
Let us know the precise name of the component. (Include any file name extensions like .dll or .sys.)
If you can, have a look at several of your crash dumps. Are all the crashes being caused by the same component? If not, could you let us know the names of the various components being cited in the various crash dumps?

Soundtrack Pro Shuts down when trying to fix analized Action

Soundtrack Pro Shuts down when trying to fix analized Action

Thanks, I'll have to give that a try if there isn't an easier answer out there somewhere. If I pull the card will I have to reload the software and drivers?
If my project is saved and I have a copy of the project saved will I be able to reload Adobe without losing anything? What I mean is will I be able to just import my whole project once reloaded?
I just don't understand what could have happened, since I was doing this with no problem a couple of days ago.
Thanks for your help, it's greatly appreciated.
Tim

Shuts down when I save any file big or small

I have Adobe CS5 and run it on a MacBookPro and recently AI started shutting down when I try to save a file. I tried to create a small mock file to save and it did the same thing. SO no matter the size of the file it just shuts down. I also restarted my computer and made sure I had nothing else open and it still does the same thing. Need Help, can't finish my work with out it!!!

So...I deleted all printers attached to my computer thru the server and it still wouldn't let me save as an ai. file. But I tried to save as an .eps file and it let me. Before it wouldn't let me save matter the extension. Would you have an idea why it wouldn't save the ai. file and shut down?

Powerbook Shuts Down When Unplugged

My Powerbook shuts down when I unplug my notebook. It won't power back on unless I plug it back in. The battery is brand new from Apple (part of the battery replacement program) It first happened a month ago while using the notebook on battery for 20 minutes, it shut off. I was able to power it back on with the batttery but HAD TO RESET THE CLOCK and the iWeb document I had opened wasn't saved.
Now, when I unplug the notebook, it shuts off and won't power back on unless plugged back in and I still have to reset the clock.
Even though the battery is somewhat new, I'm confused because the notebook has to have the battery reset when the notebook turns off when removed from the power adapter.
Any answers?

try running it with the battery removed completely.
if it runs ok, could be bad battery.
if possible, try your battery on another machine and different battery on your machine.
if different battery does not work on your machine, it could be hardware problem with PowerBook.

My older iMac running Mavericks 10.9.4 shuts down when it connects to the internet. Resetting the SMC doesn't help. What can I do?

My older iMac running Mavericks 10.9.4 shuts down when it connects to the internet. Resetting the SMC doesn't help. What can I do?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Should G5 shut down when it goes to sleep?

I bought this G5 on eBay for a song (and I've been singing ever since) . It came without a disk, no accesss to the password and they had taken the Airport Card out. (Specks say it comes with the APCard) Serves me right I guess. Anyhow, It has always shut down right after it goes to sleep. Is there anything I can do to stop this? I work between two computers and sometimes I don't get right back to it. Restarting all the time is a real annoyance.

OK, the answer to the main question is "no" it shouldn't shut down when it goes to sleep. I would first open the Energy Saver panel in System Preferences and make sure that you have the machine set to never go to sleep. Here is a Tiger screen shot of that panel:
That should solve your immediate problem. The particular settings work very well for me, allowing me to put the computer to sleep from the Apple menu when I am not going to be using it for a while. You might also want to take a look at the "Schedule,,," area in the energy saver panel, as in this picture, to see that nothing is selected there.
Now, if the machine actually shuts down when you command it to sleep, then there are other issues we can work on.

Email shuts down when open address book

Was unable to find if this was already covered but my email shuts down when I try to open the address book on the mail page (haven't ever used it, so don't have addresses there yet. When I open the address book icon in the dock, it tries to open, but then closes

Sorry to have been AWOL..under the weather...can only check everyother day or so. Followed your directions...
Received email from Apple Support Re: “Application Suddenly Quits” info
No dialog box appears/Restarting does not correct.
Can’t read application’s documentation unless app opens/no documents in app.
Used disk utility
How do I do this?
-1. Uninstalling any third-party plug-ins or enhancements for the application that's quitting unexpectedly. When you update an application or Mac OS X, a plug-in or enhancement you previously installed may not be compatible any longer.
Checked to updates for Address Book software – none, however there was an update for OSX to 10.4.8 - should I do this?.
Disconnected all other devices (should I have to do this?? Printer? Speakers?)
Also suggested
Running Apple Hardware Test, on a disc that came with your computer. If you just installed hardware, such as additional memory, Apple Hardware Test can tell you if it's defective. If you can't find Apple Hardware Test, take your computer to an Apple Authorized Service Provider.
Should I do this?
RE: Console.log
2007-01-16 16:48:13.279 Address Book[249] -[ABAddressBook sharedAddressBook] Can't ABACQUIREFILELOCK Framework/AddressBook/ABAddressBook.m:2730
RE: System.log
Jan 2 11:11:37 Christopher-Anns-Computer mdimportserver[220]: -[ABAddressBook sharedAddressBook] Can't ABACQUIREFILELOCK Framework/AddressBook/ABAddressBook.m:2730
Jan 2 12:15:38 Christopher-Anns-Computer mdimportserver[232]: -[ABAddressBook sharedAddressBook] Can't ABACQUIREFILELOCK Framework/AddressBook/ABAddressBook.m:2730
Jan 2 13:29:59 Christopher-Anns-Computer mdimportserver[238]: -[ABAddressBook sharedAddressBook] Can't ABACQUIREFILELOCK Framework/AddressBook/ABAddressBook.m:2730
Jan 2 13:30:38 Christopher-Anns-Computer launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[218]: exited abnormally: Hangup
Jan 16 12:14:51 localhost kernel[0]: Got boot device = IOService:/MacRISC2PE/pci@f2000000/AppleMacRiscPCI/mac-io@17/AppleKeyLargo/ata- 4@1f000/KeyLargoATA/ATADeviceNub@0/IOATABlockStorageDriver/IOATABlockStorageDevi ce/IOBlockStorageDriver/TOSHIBA MK4018GAS Media/IOApplePartitionScheme/untitled@9
Jan 16 12:17:35 Christopher-Anns-Computer mdimportserver[140]: -[ABAddressBook sharedAddressBook] Can't ABACQUIREFILELOCK Framework/AddressBook/ABAddressBook.m:2730
Jan 16 12:17:51 Christopher-Anns-Computer mDNSResponder: ERROR: Only name server claiming responsibility for "Christopher Ann [Christopher-Anns-Computer.local].ttp4daemon.tcp.488319386462643." is "."!
Jan 16 12:17:51 Christopher-Anns-Computer mDNSResponder: ERROR: unknown result in regservice_callback: -65538
And what is this about???? Am I being spied upon?
Jan 3 09:51:45 localhost kernel[0]: ADB present:8c
Jan 3 09:51:45 localhost kernel[0]: Security auditing service present
Jan 3 09:51:45 localhost kernel[0]: BSM auditing present
Jan 3 09:51:45 localhost kernel[0]: disabled
Thanks soooooo very much for your help.

Itunes shuts down when clicking anything

My iTunes shuts down when I click anything on the screen other than the music. If I click anything on the sidebar (Store, Playlists, Library, etc.) or the album artwork it shuts down. I have tried pulling all the iTunes preferences out of the library and restarting the computer. This does not fix the problem. This has been going on for a few months, but I have been downloading the newest versions of iTunes and it continues to happen.

Hey chaimoy,
It seems like you may be experiencing an unexpected quit from iTunes when importing a file into the iTunes library. I have an article for you that addresses this circumstance, and it can be found below:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
http://support.apple.com/en-us/HT203206
Thanks for using the Apple Support Communities. Have a good one!
-Braden

My Satellite laptop (A305) shuts down when run on the AC charger/adapter

The problem is that my Toshiba _A300 series laptop (A305) shuts down when you try to run it on the AC charger/adapter_. You can boot it with the power cord plugged in and it will get to Windows Desktop and maybe a few minutes more at most before shutting off.
It will boot and _run from battery without problem_, but if you plug in the AC while it is up and running on battery the machine will normally click off instantly and reboot to the message "Windows was not shut down correctly."
The _AC adapter works fine_ reading a steady 19.19 to 19.20 volts with a voltmeter. It also _charges the battery fine when the computer is off_. I have two Toshiba brand batteries and they both work fine.
One interesting thing is that the _computer runs fine on AC when in safe mode_.
I _did a reformat/factory restore_ of Vista to assure it was not software and drivers, and still got the same problem before any external devices had been plugged in.
It has the latest BIOS and I tried resetting it to default values in case anything had gotten changed. It made no difference.
This is _not a heating issue_ because _while it is run on battery I can watch long videos_ without it shutting off. I ran compressed air through the vents just to make sure, but it makes no difference in behavior. Usually with an overheating shut-off, the computer cannot be started until it has cooled some, but these shutdowns are accompanied by an instant reboot.
I have seen on some threads that this type of problem one can work around by disabling one of the processors in Device Manager, but I don't think that is much of a lasting solution or good for the computer.
Has anyone seen this problem before and have you come with a full diagnosis of the problem and a real solution?

I have Satellite A300 and until now everything works OK.
I would like to know what happen when you remove the battery and use notebook with power supply only. Does notebook shuts down again.
If not let OS run and put the battery.
Is the battery recognized properly? Does notebook switch off again?
To be honest I cannot imagine this issue has something with software or background processes. Recovery image you got with your notebook is designed for this certain notebook mode. Recovery image is tested and I dont think preinstalled OS has anything to do with this.
Full diagnosis?
And how to do this? You know very well that diagnosis can be done with diagnostic tools only and such tools have services only. I hope you will find answers but Im 99% sure there is nothing you can do about that. Maybe you should contact service, explain the situation and ask for help.

Crystal 10 Shuts down when saving to enterprise Server

Similar Messages

Maybe you are looking for