Crystal layout previews fine in Crystal, but not in SAP.

Hi,
I've built a simple report in Crystal based upon the Goods Receipt Header and Goods Receipt Rows Table.
I've included the DocKey@ paremeter
I've set the correct select record: {OPDN.DocEntry} = {?DocKey@}
When I preview the report in Crystal, Crystal asks me to define a DocKey. I select 12 (because I know this has good data in SAP. My report works fine (see below).
However, I've having difficulty generating the report from SAP. When I preview the report in SAP, it imports the correct DocKey into the layout via the DocKey@ parameter, but, it doesn't actually select any data (see below).
I've checked the obvious things like ensuring SAP is generating the correct layout.
Any ideas?

Hi
Try to Import the specific layout in SAP Business One then run the layout and also Check the below discussion
How can Crystal Report get current DocEntry in Sales Quotation?
With Regards
Balaji Sampath

Similar Messages

Dreamweaver text looks fine in Safari but not Firefox NEED HELP!!!

Dreamweaver text looks fine in Safari but not Firefox, all my text goes out of alignment and the fonts look like different sizes. Please let me know your thoughts. Here is a link to the page I'm having problems with. http://www.alexandrasantibanez.com/bio.html

I had the same problem for days what a waste of time trying
to figure out code... the code was fine. I was running flash player
7.0 Upgrade your flash plugin to 9.0 and it should work fine in
Firefox and IE. It did for me.

A javaScript code that runs fine in IE but not in other plz help

Hello friends,
plese help me in getting the code for Opera and Mozilla browsers. The following code runs fine in IE but not in other browsers. it show titlebar in other browsers. What to do disable titlebar in other browsers? plz help
<html>
<head>
<script>
//Frameless Banner Popup
// Set the url of the banner popup window page
//var theURL = "index.htm";
var theURL = "/cgi-bin/login";
// Set the title of the popup window
var title = "Login"
// Set the size of the popup window
var windowWidth = 350; // cannot be less than 100
var windowHeight = 350; // cannot be less than 100
//var windowWidth = window.screen.width; // cannot be less than 100
//var windowHeight = window.screen.height; // cannot be less than 100
// Set the position of the popup window
var windowX = ((window.screen.width/2) - 175);
var windowY = ((window.screen.height/2) - 175);
// Set true to auto-center (positions will be ignored)
var autocenter = false;
// Set true for popup to close when launch page does
var autoclose = false;
var s="width="+windowWidth+",height="+windowHeight;
var beIE=document.all?true:false;
var done=new Object("no");
if(autocenter){
windowX = (window.screen.width-windowWidth)/2;
windowY = (window.screen.height-windowHeight)/2;
function doAgilePopup(){
if (beIE){
agilePopper = window.open("","popAgile","fullscreen,"+s);
agilePopper.blur();
window.focus();
agilePopper.resizeTo(windowWidth,windowHeight);
agilePopper.moveTo(windowX,windowY);
var frameString=""+
"<html>"+
"<head>"+
"<title>"+title+"</title>"+
"</head>"+
"<frameset rows='*,0' framespacing=0 border=0 frameborder=0>"+
"<frame name='top' src='"+theURL+"' scrolling=no>"+
"<frame name='bottom' src='about:blank' scrolling='no'>"+
"</frameset>"+
"</html>"
agilePopper.document.open();
agilePopper.document.write(frameString);
agilePopper.document.close();
}else{
agilePopper=window.open(theURL,"popAgile","scrollbars=no,"+s);
agilePopper.blur();
window.focus();
agilePopper.resizeTo(windowWidth,windowHeight);
agilePopper.moveTo(windowX,windowY);
agilePopper.blur();
if (autoclose){
window.onunload = function(){agilePopper.close();}
done="okay";
</script>
</head>
<BODY onLoad="doAgilePopup(),top.window.close()">
</body>
</html>

missing semicolon in end of the variable frameString ,
better write the string in single line thats easy to find the bugs like this.
var frameString=""+
"<html>"+
"<head>"+
"<title>"+title+"</title>"+
"</head>"+
"<frameset rows='*,0' framespacing=0 border=0 frameborder=0>"+
"<frame name='top' src='"+theURL+"' scrolling=no>"+
"<frame name='bottom' src='about:blank' scrolling='no'>"+
"</frameset>"+
"</html>"

Can't FLIP a quick RENDER! Works fine in SHAKE but not to flip or Disk!

Learning with Lynda.com!
Part 1 has you rendering two files, one is a still image, the other a quicktime movie, I don't have the money for premium so I got my own clouds movie (.mov) and added a still plane.
I key framed 1 - 100 and playing it back its fine in shake, but not on FLIP or DISK, its nothing but a still image. Have done it 5 times making sure that all the right buttons are on, or not, and as I said, it works INSIDE of shake but won't RENDER to FLIPBOOK!
I don't suppose anyone wants to send me the exercise files? (on knees begging LOL) I am a member, just can't afford $300 for one pop and this is really the only program I need to learn.
Thanks!

Sorry if I'm pointing out something obvious that you already know. Have you checked the time range in the render dialog? Shake does not fill in the values for you automatically, and defaults to "1" so only renders the 1st frame. It needs to be set to eg "1-100".

Fixed headers while scrolling works fine in bids but not when deployed to reportserver

Hi, I am using SQL Server 2008 R2 & deploying a report to reportserver with fixed headers while scrolling, this works fine in bids but not when deployed to reportserver. We are IE 9.
Thanks in advance...............
Ione

Hi ione721,
Since you have identified the 2 xml files are identical, according to my knowledge, there maybe a compatibility issue with IE 9 and SSRS 2008 R2, so I suggest that you could run the report in compatibility mode. Please make sure you have turned on Compatibility
View in Internet Explorer 9 by following steps:
When Internet Explorer recognizes that a webpage is not compatible, you will see the Compatibility View button on the Address bar. Try clicking it.
When Compatibility View is turned on, the button changes from an outline to a solid color when you view the page.
The following screenshots are for your reference:
If you have any questions, please feel free to let me know.
Best Regards,
Wendy Fu

USF on iTunes U collections such as Sustainability and iteach Initiative are not displaying new items even days after they are uploaded to the collections. The items show in the Preview of the collections but not Live view. not displaying

USF on iTunes U collections such as Sustainability and iteach Initiative are not displaying new items even days after they are uploaded to the collections. The items show in the Preview of the collections but not Live view. not displaying

Greetings;
This seems to an ongoing issue (see related discussion link). We've been experiencing the same update lag since last Friday. The new additions to the Collection appear and are accessible in both the iPad and iPhone applications, but even though they additions appear in "Quick View", the material doesn't appear in the Collection itself. Apple is aware of the issue and is investigating. All the best...
Syd Rodocker
Tennessee State Department of Education
https://discussions.apple.com/message/15461971#15461971

Pages preview fine in DW, but CSS appears to be ignored on live website

This is very basic, but I can't figure it out. I am the successor webmaster for a very simple 15-page website.   The site has some layout issues that need correcting, and I have rewritten the pages using more of a CSS-based layout since (among other reasons) I don't understand the original tables-based layout. I used the DW twoColFixedLtHdr.css pre-fab layout. The re-written pages look fine in the DW and preview fine in Safari and Firefox. The pages did not look right once I uploaded them, so I replaced the pages with the originals. It appears the stylesheet is being ignored. I changed the name of the css file to "newstylesheet" to get of the upper-case letters, and have looked over everything closely but can't find the issue.
This is a sample page. http://living4zachary.org/whowearetestpage.html
None of the CSS formatting is there, most notably the left sidebar should have a black blackground and the main text should wrap around it since the sidebar is floated left.
On the host site, all of the html pages are in a sub-directory called public_html. The newstylesheet.css file is a first-level file, right off the main root.
Here is the code, brought forward from a temple, attaching the style-sheet:
<link href="../newstylesheet.css" rel="stylesheet" type="text/css" />
Here is the code establishing at the beginning of the sidebar:
<div class="newstylesheet" id="sidebar1"><a href="index.html">Home</a>
      <p><a href="aboutzac.html">About Zachary</a></p>
      Who We Are</a></p>
      <p><a href="whatissca.html">What Is S.C.A.</a></p>
      <p><a href="#">How You Can Help!</a></p>
      <p><a href="upcomingevents.html">Upcoming Events
      </a>
      <p><a href="oursponsors.html">Our Sponsors</a></p>
      <p><a href="contactus.html">Contact Us</a></p>
      <p> </p> 
</div>

</div>
<div id="mainContent">
I don't think the problem is in this code, since DW is perfectly happy with it. Somehow, the css is linking up with the page on DW, but not on the server.
This has really got me baffled. Can somebody please help me?
Here is a picture of the root directory on the host server, where you can see the newstylesheet.css and the public_html sub-directory that contains all of the live pages and the whowearetestpage:

Ned and Nadia:
Your replies are very appreciated. They have solved my problem for the test page, and I'm very confident for the other 15 or so pages to follow.
Nadia: I wish the photo would have attached. The newstylesheet is there plain as day when I look on the server's file manager. But, I also couldn't pull it up when I tested it as you did. There are other css files there that I could access. They are all on the same file directory - some would open, some wouldn't. Not only is newestylesheet listed on the server, I can download it and open it up. This is very strange to me, but a wonderful piece of troubleshooting on your part. (I have looked a hundred times for some kind of typo, but it just isn't there.)
Ned: It worked like a charm when I moved the stylesheet to public_htm.   In my DW file directory, I have the css file on the main root and pages in public_htm sub-directory - and that's the same way DW uploaded them to the server. That's the way the original pages were organized, and that's the way they "appear" to be on the server. However, since the subject css file was "there but not there", it just wasn't working.
I'm not familiar with how this forum works, but I noticed a "Solved Problem" button. I'm going to try to click that for both answers.
You guys are great. I am so grateful for your help.
Steve J.
Plano, TX

Custom Dashcode widget works fine on mac, but not in iBooks

I wrote a dashcode widget that works fine on my mac but not in iBooks, what am I doing wrong?
I am trying to create a widget that performs a specific calculation when the user inputs the 2 variables. However when I go to preview it on my iPad, the button that performs the calculation disapears. It is visible in the thumbnail, but once you launch to full size... bye bye...
Help is appreciated. Are buttons not allowed?

tk0us wrote:
it sets the size of the widget when displayed as a widget full screen or whatever size the png is
That is not correct. What sets the size of the widget when it runs is the canvas size of the widget, not Default.png.
At the link below, you can find a widget with a Default.png of 140x200 pixels. When you run the widget, it displays at 900x607 pixels.
http://www.triodia.com/staff/michi/drumming/RopeCalc.zip
This demonstrates that Default.png has nothing to do with the size of the widget when it runs. Default.png need not even have the same aspect ratio as the widget canvas.
Michi.

ITunes/Apple Mobile Device works fine w/iPod but not iPad

Hi. I'm getting stuck on this and would like some help to solving this problem. Basically I'm trying to sync my iPad; however, whenever I connect it, this meesage pops up: "this iPad cannot be used because the Apple Mobile Device is not started." The problem is that when I try to plug in an iPod using the same wire, it works fine, no problem, but the iPad just won't connect. I have since uninstall and reinstall all Apple components (iTunes, AMD, QuickTime, etc) and it's still the same thing...iTunes connects fine w/ the iPod, but not the iPad. What to do? Thnx in advance.
EDIT:
Btw, I've tried to connect the iPad while the iPod is connected, and the "Apple Mobile Device is not started" error message pops up too, which is weird, because the iPod is connected and syncing at that time...which means the Apple Mobile Device thing IS started. >.>

The iOS devices use Apple Mobile Device Service, while older iPods use the iPod Service.
Checkout this Apple document -> How to restart the Apple Mobile Device Service (AMDS) on Windows
Are you able to restart the service after following the steps in that article?

Disc playing fine on DVD, but not MacBook Pro

Hello - I have authored and burned discs, and they all play fine on my DVD player on my TV set, but are not playing on my MacBook Pro. I put the disc in after Disk Utility shows it's been burned successfully, and after a few 'tries', it pops out, never even mounting on the computer. Might there be a 'fix' for this? Thanks so much...

I would start to troubleshoot by trying a commercial (rented or purchased) DVD and make sure it's not the drive itself. It would be strange for a DVD to work in a set top box but not your computer, it's usually the other way around.
And did you really mean to post this in the Final Cut forum?

HTML Mashup works fine in Silverlight, but not in UI5

Hello community,
we are building an integrated Customer Service Management solution for a Client of ours, via the SAP Cloud for Customer platform (solution for Services).
Currently, we are trying to embed some external Business Process activities in our Service Tickets UI Screens, by using HTML Mashups. Our reference has been the standard Cloud Application Studio documentation, and some well-written articles here on the SCN, such as the following: HTML script mashup - launched from an Embedded Component by Vinita Sinha.
In our solution, the HTML Mashup has been connected via a Port Binding interface to the C4C UI Layer, in a way to pass it some relevant information such as the Ticket ID, the Customer ID and the Cause Category ID, as shown in the picture below:
We built a custom Port Binding object, but if you use the Standard "Ticket Information" port Binding (in category "Productivity & Tools"), the effect will be the same. The Standard Port Binding we used in the Mashup Authoring configuration floorplan is the following:
In addition, we discovered that, in our case, this Mashup development works just in Silverligh Web Interface, but not in UI5. While in Silverlight we are able to consume and correctly interact with our Mashup, in UI5 we can see just an empty pane stuck at the initial "Loading..." screen, as shown below:
We opened an incident with the SAP Support for our system, and we have been told to try to build the Mashup can work just with no Port Binding specified. Indeed, if we remove the Input Port Binding from the Mashup configuration, the screen seems to work fine even in UI5, as shown below:
Unfortunately, this technical constraint does not cover sufficiently our Business Scenario, because the Mashup should be initialized with our Service Ticket (and Customer) data.
Has anybody ever experienced this kind of issue? And how did you solve it? If it has no resolutions, is there available any possible workaround?
Thanks a lot for your contributions.
Cheers,
Davide

Hi Pragya,
thank you for the update.
Another question: could you please give us any reference about these corrections you told about? Maybe they could be relevant in our case too.
Our raised incident number is: 3100851983
Kind regards,
Davide

Upload files from my app works fine in JDev but NOT on app server???

i guys,
I'm using jdeve 10.1.2. and adf bc's. So here's my problem:
In my application i need to allow for the upload of files from user's computers. This works perfectly fine from jdeveloper but when i deploy my application on the application server i get the following error:
JBO-26041: Failed to post data to database during "Insert": SQL Statement "D:\TrademarkTestData\TrademarkunitTestData.xls (The system cannot find the path specified)".
D:\TrademarkTestData\TrademarkunitTestData.xls (The system cannot find the path specified)
For some reason the system cannot find the path. This is most frustrating as it works perfectly fine when run from jdeveloper.
Any ideas would be most welcome.
Thanks in advance,
Newbe

Hi Frank,
Thanks for the response. I've consulted with our server guy and he says that there are no read/write privileges. Jdev is not on the server.
I'm really stumped by this so if you have any ideas, I'd really appreciate it.
Happr New Year to you,
Newbe.

Query working fine in toad but not in forms 6i

i have following coding on when button press triger
declare
CURSOR C1(year number,month number) IS
SELECT ITM_NO,ITM_NAME,XAQ QTY,XAQ*TP VAL,gp
FROM
select ci.itm_no ITM_NO,ci.itm_name ITM_NAME ,cpg.group_id gp ,xaq ,ALLIED.CORP_PRIC_TP( ci.itm_no)TP from
select prod_no,sum(xaq)*1 xaq
from
select prod_no, sum(nvl(xrd_sqty,0)) Xaq
from allied.mrk_01_02
where year=year and f_prd=month
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
union all
select prod_no, sum(nvl(xrd_sqty,0)) Xaq
from allied.mrk_02_02
where year=year and f_prd=month
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
union all
select prod_no, sum(nvl(xrd_sqty,0)) Xaq
from allied.mrk_03_02
where year=year and f_prd=month
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
union all
select prod_no, sum(nvl(xrd_sqty,0)) Xaq
from allied.mrk_04_02
where year=year and f_prd=month
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
group by prod_no
) A,allied.corp_inv ci,allied.corp_01_01 c01, allied.corp_01_02 c02,allied.corp_prod_group cpg,allied.v_prod_grp vpg
where ci.itm_no=a.prod_no
and ci.itm_no=c02.itm_no
and c01.grp_id=c02.grp_id
and c01.grp_id in(55,56,57,58,59)
and vpg.prod_no =ci.itm_no
and vpg.group_id=cpg.group_id
where XAQ <>0;
Begin
     delete from fiaz.tmp_topten_prod;
     for i in c1(:year,:month)
loop
          insert into fiaz.tmp_topten_prod
          values(i.itm_no,i.itm_name,i.qty,i.val,i.gp,0);
     end loop;
standard.commit;
message('inserted in temp');
     exception when others then
          message (dbms_error_text);
          message (dbms_error_text);
End;
Same Query (as used in cursor c1) works fine in toad but giving wrong result from forms... and the problem is xaq field i.e returns incorrect qty...
i guess union clause is not working in this situation...
plz suggest me the appropriate changes in the query to work well from form as well...
combination:Forms 6i,Oracle 8.0.6
Regards,
Usman Afzal

As per your suggestion i have created a stored procedure but the followin error prevents procedure creation
create or replace procedure fiaz.topten_prod(v_yr number,v_mn number) is
begin
delete from fiaz.tmp_topten_prod;
insert into fiaz.tmp_topten_prod(itm_no,itm_name,qty,val,grp_id,prority)
SELECT ITM_NO,ITM_NAME,XAQ QTY,XAQ*TP VAL,gp,0
FROM
select ci.itm_no ITM_NO,ci.itm_name ITM_NAME ,cpg.group_id gp ,xaq ,ALLIED.CORP_PRIC_TP( ci.itm_no)TP from
select prod_no,sum(xaq) xaq
from
select prod_no, sum(nvl(xrd_sqty,0)) Xaq from allied.mrk_01_02
where year=v_yr and f_prd=v_mn
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
union all
select prod_no, sum(nvl(xrd_sqty,0)) Xaq
from allied.mrk_02_02
where year=v_yr and f_prd=v_mn
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
union all
select prod_no, sum(nvl(xrd_sqty,0)) Xaq
from allied.mrk_03_02
where year=v_yr and f_prd=v_mn
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
union all
select prod_no, sum(nvl(xrd_sqty,0)) Xaq
from allied.mrk_04_02
where year=v_yr and f_prd=v_mn
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
group by prod_no
) A,allied.corp_inv ci,allied.corp_01_01 c01, allied.corp_01_02 c02,allied.corp_prod_group cpg,allied.v_prod_grp vpg
where ci.itm_no=a.prod_no
and ci.itm_no=c02.itm_no
and c01.grp_id=c02.grp_id
and c01.grp_id in(55,56,57,58,59)
and vpg.prod_no =ci.itm_no
and vpg.group_id=cpg.group_id
where XAQ <>0;
commit;
end;
Error:
"PLS-00201: identifier ALLIED.MRK_01_02 must be declared "
i have not changed any thing in query working fine in toad without create procedure text and if i describe this table it shows the structure (desc allied.mrk_01_02)
Now where is the problemmmmm
Plz Help

Site fine in Safari, but not in Firefox

so I made a simple photo page in iWeb. the page works fine in safari, but I actually get a 404, page not found error when I look at it in Firefox.
now the even weirder thing is I get this error on my macbook pro, but it works just fine in firefox on my powermac G5. I've also come across a pc user who can't see it properly in firefox, while other pc users can...
very confused, thoughts?

if you are tying the address in make sure the W in iWeb is a capital.
other than that you might supply the address so someone can attempt to view it.
sounds like an addressing problem though
good luck

Cool previews works in Explorer but not in ALL Firefox locations.

Cool previews works on all of my I.E websites.
Cool previews works on some website but not all. On AIRNAV.COM, it works sometimes on the Procedure links but mostly it does not work. It worked last year.

If you don't get an answer here you should ask for help from the CoolPreviews' support site, since this forum is for getting help with Firefox, not Firefox add-ons. See:
*https://addons.mozilla.org/en-US/firefox/addon/coolpreviews/
...which links to:
*http://www.coolpreviews.com/firefox/support_cp_ff.php

Crystal layout previews fine in Crystal, but not in SAP.

Similar Messages

Maybe you are looking for