Crystal Report does not show the webelement for SAP System

Hi all,
I have added web element in Crystal report for SAP system (BI or R/3) . But it does not show the control. It shows only scipt.It does not render the HTML.
But if I add the webelement for Excel sheet ,It shows the control.
How can I add web element for SAP System? Can't we use web controls in SAP system ?
Help me in this regard.
Regards
Hemalatha J

Hi,
We have the same problem, did you find the final solution?
Thanks in advance
Regards.

Similar Messages

  • Field Explorer in Crystal Reports does not show the same names as Bex Query

    Hi
    I have crystal reports, I can retrieve data from BW Bex Query. But in the field explorer it does not show the names as in the Bex query designer.
    In the Bex query designer a field will have the following technical name 0Debitor and the description is Customer.
    It shows in crystal reports in the field explorer twice as D[0DEBITOR]D and D[0DEBITOR]D. It also does not seperate key figures and characteristics.
    I would like it to display the field explorer as shown in this blog.
    /people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
    Thanks in advance

    Hi,
    take a look here:
    /people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
    make sure you are using the MDX Driver and what happens is that you will see several fields per characteristic. example: one for the key, one for the description, several if modelled for the display attributes
    Ingo

  • Report does not show the main section while calling from forms 6i

    Hi
    I am running report from report from forms 6i but is does not show the data in main section, where as the data in the header section is ok.
    But when i run the same report independantly from report builder it show the both header and main section with relevent data.
    pl solve the matter
    thanks in advance

    can you tell me more about this, you might check if you are using different users when you call this report or if the user has all privileges to see all tables in this report

  • The report does not accept the value for apps.fnd_profile.value('USER_ID')

    Hi,
    I followed the below note and added a report to my SSHR menu.
    How To Add A Report To A 11i Self Service Menu [ID 334847.1]
    In my report , I have a condition in the query
    and a.created_by =apps.fnd_profile.value('USER_ID')
    When the report is submitted as a request , it works fine., however the same report when called from the self service page does not accept any value for apps.fnd_profile.value('USER_ID') .
    Is there a workaround to handle this problem.
    regards

    hi,
    I had already tried the option apps.fnd_global.USER_ID too.
    However it does not accept the value for apps.fnd_global.USER_ID.
    We want to call the reports in SSHR using oaf and at the same time the records that are pending for approval created by the employee should only be visible.
    regards
    Maya

  • Router 7606 does not show the inventory for the Fan module

    I have a issue with a router 7606, specifically with  fan module, the LC go down because it does have sufficiently cooling , I changed the Fan module, the IOS, The power supply, and I still have the same issue, Besides the Router does not show the inventory or PID  for module fan, 
    logg" system minor alarm on operating fan count"
    Someone knows what could be happening,

    Check this:
    Can you try this;
    7606-01#show environment status fan-tray 1
    fan-tray 1: 
      fan-tray 1 type: FAN-MOD-6SHS
      fan-tray 1 mode: Auto
      fan-tray 1 fan-fail: OK
    7606-01#show power
    Fan  Type               Watts   A @42V State
    1    FAN-MOD-6SHS        180.18  4.29  OK............................ FAn try
    If above doesnt work then try the below link:
    https://supportforums.cisco.com/discussion/10824271/7606-s-and-fan-module-6shs-version-1
    HTH
    inayath
    *Plz dont forget to rate if this info is helpfull.

  • Crystal report does not show any output

    Hi
    The client runs crystal report and on the crystal viewer  no out put is retrieved. basically The page shows as gray colour. Its like as if there is no report to run. No error message is also received
    However when you print the report it prints fine with all the details on the report
    The user has full rights to the crystal reports folder as well
    All users can run the crystal reports fine except for one user
    Any possible solutions?
    Thank you
    KInd Regards
    Apsara

    Hi,
    We have the same problem, did you find the final solution?
    Thanks in advance
    Regards.

  • WT reporter does not show split for tax authorities!

    Dear all:
        I need to report for all employees some WTs of taxes, but wt reporter does not show the splits for them (to distinguish federal from statal authorities payments), it is like summarises all the same WTs... I tried payroll recon. report but this one does not output the data in ALV format (im in 4.6 version) so it is not useful to run in bulk
    Do you have any work around for this?
    I would appreciate any tip or workaround on this,
    Thank you!

    Hi
    1. Allocated costs are always treated as Fixed costs, unless you have booked the expenses in FI using Activity Type as Aux Account assignment object
    2. Check whether these costs are included in Inventory valuation in your Cost Comp Str in OKTZ... If not relevant for inv valuation, these costs wont show up for Variance calculations
    br, Ajay M

  • Report does not show Quotation price

    Dear friends,
    What may be the reason, that my report does not show the quiotation price, though Sales order price, revenue price shows normal?
    Please give some probabilities.
    Rao

    check your plan profile OPSB if automatic rev planning for both Quotation and Sales order is ticked

  • SCCM console does not show the link to the report manager!

    SCCM console does not show the link to report manager.
    Any idea?
    thanks!

    Hi,
    The report manager URL isn't displayed in SCCM console. Why you want to display it in console?
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • After upgrading to iOS 8, the weather app does not show up results for any of the Indian States/cities

    After upgrading to iOS 8 on my iPhone 5, the weather app does not show up results for any of the Indian States/cities. Can Apple look into this or does anyone have a solution to this.

    Swipe from bottom of days listed ("Wednesday, Thursday, Friday, etc")  upwards.  I thought it was gone too but it's still there~just takes different way to access it.

  • ' delete an app. All apps wiggle incl. the one in questions. However the app I want to delete does not show the x button. I reseted, also restrictions are on with on for apps delete. Suggestions?

    ' delete an app. All apps wiggle incl. the one in questions. However the app I want to delete does not show the x button. I reseted, also restrictions are on with on for apps delete. Suggestions?

    mardemar wrote:
    ... - the only one without an x delete button.
    What is the name of this App and where did you get it...?

  • How do I get the none button to pop up so u don't have to have a credit card for apps? I owe nothing for apps from Apple, NOTHING!? And it still does not show the option "none". If it helps the card I have is a debit.

    How do I get the none button to pop up so u don't have to have a credit card for apps? I owe nothing for apps from Apple, NOTHING!? And it still does not show the option "none". If it helps the card I have is a debit.

    I'm happy you figured it out and just try to keep in mind that not everyone you talk to at support will give the same advice or have the same knowledge. Just like those who contribute to these forums. Sometimes Google is your best friend.
    I agree that Apple could probably make it easier, but as of yet prefer security over freedom. (sound famaliar?)
    Anyway, if you choose to do so, you can leave feedback here:
    Apple.com Feedback
    Apple Support Feedback
    Developer Feedback
    Product Feedback
    QuickTime Feedback
    Search Feedback

  • My wife ran the battery down in her shuffle.  When I plug it in to the wall or computer, it will blink red solid for about 3 seconds and then shut off.  Is the battery that dead, or is something else wrong.  ITunes does not show the shuffle

    My wife ran the battery down in her shuffle.  When I plug it in to the wall or computer, it will blink red solid for about 3 seconds and then shut off.  Is the battery that dead, or is something else wrong.  ITunes does not show the shuffle

    Hi Jennsman40,
    Welcome to Apple Support Communities.
    If this symptom persists even after you charge your iPod Shuffle, see this page for some troubleshooting steps:
    http://www.apple.com/support/ipodshuffle/assistant/itunes/
    Best,
    Jeremy

  • I am installing snow leopard on a new drive unformatted but it does not show the disk to install it on.? do i need to format first with one partition?

    I have installed a new drive on my mac book and more ram but the snow leopard install asks which to install the system on but then does not show the drive.
    do I have to partition it and name it first. -- if so just one partition?

    Do this:
    Drive Preparation
    1.  Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    When formatting has completed quit DU and return to the installer.  Complete the OS X installation.

  • Crystal Report Images Not Showing - JSP inside /WEB-INF folder

    Hi Experts,
    I am using Crystal report for Eclipse and also using Struts2 and tiles framework combination.
    The problem is when viewing the report all I've got is red X on all images and the graph image also not showing. This is when I use tiles and my jsp is inside the web-inf folder.
    This is my struts link: href="s:url value='/report/reportOpen.action?report=1'
    I've checked that the path to the viewer generated HTML is not correct. see code below.
    src="../../../crystalreportviewers/js/crviewerinclude.js"
    But when I test to access a simple jsp viewer that resides on the web root folder, this works fine but of course this is not what I want to have. I need to have my banner and menus on top of the report page (using tiles)
    This is my jsp link: href="s:url value='/ReportViewer.jsp?report=1'
    Viewer generated HTML below.
    src="crystalreportviewers/js/crviewerinclude.js"
    This might be a common problem and that you can share to me your solution.
    Note: I removed the script tags because I can't submit this entry.
    Thank you  in advance,
    Regards,
    Rulix Batistil
    Crystal Report Images Not Showing - JSP inside /WEB-INF folder

    Hi Saravana,
    After a few experimentation from your idea i was able to figure out the problem and now it is working.
    I don't have to copy the folder to where my jsp resides but still maintains it in the root location:  web/crystalreportviewers
    The changes should always be in web.xml.
    1st: change the crystal_image_uri value to ../crystalreportviewers
    2nd: change crystal_image_use_relative value to "web"
    Change to "web" instead of webapp because that is what I named my web root folder.
    <context-param>
              <param-name>crystal_image_uri</param-name>
              <param-value>../crystalreportviewers</param-value>
         </context-param>
         <context-param>
              <param-name>crystal_image_use_relative</param-name>
              <param-value>web</param-value>
         </context-param>
    Thank you. You showed me the way on how to solve the 3 day problem.
    BTW, my next problem is when clicking on any buttons prev/next/print/export, I got this error HTTP Status 404.
    Well, at least for now I can view my initial report.  I just need to figure out the next issue and with the help of the great people here in the forum.
    Thanks a lot.
    Regards,
    Rulix
    Edited by: Rulix Batistil on Nov 26, 2008 7:27 AM

Maybe you are looking for