Crystal Report print layout error during print preview

Hi Everyone,
When I try print preview a marketing document, it will work the first time, and then when I try to print preview again it brings up a window asking me to login into the database with the sa username and password.
When putting in the correct password, the login fails.
When I click cancel, SAP hangs up and requires a restart.
All print layouts were done in Crystal Reports, and imported via the report layout manager.
This occurs on all marketing documents where there is a crystal print layout.
Anyone will be able to help me with this?
Thanks
Best Regards
Dario Moutinho
Edited by: Dario Lopes Moutinho on Jul 7, 2011 3:19 PM
Edited by: Dario Lopes Moutinho on Jul 7, 2011 3:19 PM

Hi Rahul,
Your solution worked. Thank you very much.
I also did not include a stored procedure into the connection that was needed in the layout.
This could have also added to the problem (for future reference).
Best Regards
Dario

Similar Messages

  • Error during print request output. l_rc = 1

    Hi ,
    I have a request to create on ouput device which can copy the spool request to desired location in application server. Our server is not connected to any physical server and is windows NT.
    I am tring to create ACCESS TYPE 'L' with host printer name '__default'.
    I am using control set to copy file at desired location on server
    COPY &F <path for file to be copied>&T
    File is being copied to desired location but its returing error message "Error during print request output. l_rc = 1"
    Complete log is below:
          SAP spool error log                                                                   
          =====================                                                                               
    Print request processing log                                                                               
    The host spool is reporting errors                                                                               
    Message from host spool:                                                                               
    1 file(s) copied.                                                                 
    End of message                                                                               
    Command used: COPY E:\usr\sap\D06\DVEBMGS00\data\000002934300001.D06 E:\interface\D06\                                                                               
    Errors occurred processing this print request                                                                               
    Error during print request output. l_rc = 1                                                 
    There may be no printout                                                                               
    Most important attributes of spool request                                                                               
    Request number 29343                                                                               
    Request name SCRIPT ZRAJ BASISADMIN                                                         
    Client 220                                                                               
    Owner BASISADMIN                                                                            
    Request attributes                                                                          
    Time created   2008102906203900                                                             
    Remaining life  +00008000000                                                                
    Dispo 1 (Go/Hold) G                                                                         
    Dispo 2 (Keep/Delete)     K                                                                 
    Dispo 3 (Indirect/Direct) D                                                                 
    Default output device ZRAJ                                                                  
    Default no. copies  1                                                                       
    Format X_PAPER                                                                               
    Main print request characteristics                                                                               
    Spool request number 29343                                                                  
    Print request number 1                                                                      
    Print request attributes                                                                    
    Time created   2008102906203900                                                             
    Output device ZRAJ                                                                          
    Format X_PAPER                                                                               
    Character converter active when first problem occurred                                                                               
    No information available                                                                               
    Pls help.
    Regards
    Raj Kiran

    If you have done a search with your subject line, you would have got the following [results.|https://www.sdn.sap.com/irj/sdn/advancedsearch?query=%22errorduringprintrequestoutput.l_rc%3D1%22&cat=sdn_all]
    so do a search in SCN before posting your question.
    Regards
    Karthik D

  • Error printing Check - "Missing Parameter Values. Error During Printing"

    Dear friends,
    Our client is in SAP B1 8.81 Pl07 and is facing an error while printing checks designed in Crystal Reports. As soon as they click on "Print" button, we are getting an error "Missing Parameter Values. Error During Printing".
    We have checked the Crystal Reports and all the parameters are given.
    Can anyone help me regarding this?
    Thanks and regards,
    Bharath S

    hi,
    Quoted from Note 1555170
    1555170 - Error 'Missing parameter values' printing with CR layout
    Symptom
    When you print on add any stock transactions document, with Crystal report layout, you receive error message:'Missing parameter values' and then 'Error during the printing; ensure all parameters are defined'
    Step by Step scenario:
    1.Go to Administration / System Initialization / Print preferences and select the tab per document.
    2.Select the document stock transfer and tick the box print document when adding document and click on update.
    3.Go to stock management / stock transactions / stock transfer
    set the Crystal report template as default.
    Note:
    - The issue is reproduced also for Goods Receipt and Good Issue.
    - The issue is reporduced with any Crystal Report Template  for the     above documents.
    Cause
    Program error
    Solution
    This issue is candidate for a change in a future release of SAP Business One.
    Workarounds:
    1.Use PLD for printing the stock transactions.
    2.Convert the PLD layout to Crystal reports with Crystal converter.
    3.Print the document after adding it.
    Other terms
    sap business one, printing issues, good issue, good receipt, stock transfer, crystal report, print preferences, print when adding, dockey, missing parameter
    Header Data
    Released on     07.02.2011 13:27:30
    Release status     Released for Customer
    Component     SBO-REP-CR Crystal Reports 2008 for SAP Business One
    Other Components     
    SBO-GEN-PRT Printing Issues
    Priority     Correction with low priority
    Category     Program error
    Validity
    Software Component
    Version
    SAP BUSINESS ONE
    8.8
    8.81
    you can download the PLD to Crystal Converter [here|http://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/108305a7-1555-2d10-8289-9a178d441c71]
    regards,
    Fidel

  • Error during printing.

    I seem to have a weird error. Whenever I print system reports or preview them on the server it works just fine but if I go to print them or preview them on a terminal server I get an error. When I go to print I get the error "Error during printing; ensure all parameters are defined". When I preview them I get asked for the database login. I've put in the correct login and tried integrated security to no avail. I have looked at the self help application and tried both Case 1 and Case 2 under Environmental issue and I've done the Appendix. I have never seen had this problem before. Any suggestions?
    SAP Version: 8.81 PL10
    Server OS: Windows 2008 R2
    SQL Server: 2008 R2
    Terminal Server OS: Windows 2003

    This problem is due to mismatch between too servers. You may have to modify registration keys to make is work.
    Search (x86) in registry and/or user profile to find all Crystal Report related entries on the Terminal Server to correct.

  • BO XI R2 - "Blank "Crystal Reports Viewer" window - attempt to print report

    My company recently set up a Business Object Enterprise XI Release 2 server.  On the server are a number of crystal reports that are run interactively by users, through the user console.  The expectation is that the user will log on to the BI server, click on the report title, enter the parameters, see a preview of the report in the Crystal Report Viewer, then click the print icon on the Crystal Report Viewer toolbar.
    Our corporate standard is current Windows XP SP3, with Internet Explorer 8;  By default, users are set up to use the DHTML report viewer.  The reports were developed with the Crystal Reports XI R2 report designer, and connect to an Oracle 10g database through Oracle client.
    When users attempt to view, then print the reports, the user is able to select the report, enter the parameters, view the report data, and even page through the report preview with no issues.  However, when the user attempts to print the report by clicking the print icon on the Crystal Reports Viewer toolbar, a blank "Crystal Reports Viewer" window pops up and remains indefinitely.
    The really puzzling thing about this issue is that for about 1/3 of our users, printing will work - a print dialog will appear, allowing the user to select a printer, and when the user clicks OK, the report will print.   For the other 2/3 of our users, the blank "Crystal Reports Viewer" window pops up.
    I have added the BO XI R2 server's address to trusted sites, adopted the lowest security settings for trusted sites, and enabled all activity I could think of in IE security settings (ActiveX controls-related).  I also ran the web site in compatibilitiy mode.
    Has anyone on this forum experienced this issue, and does anyone here know how to resolve it?
    Thank you,
    Bob Gardner

    I suspect that this behavior occurs because the client computer is unable to download ActiveX controls.
    The report viewer requires the PrintControl.dll to print reports from the client computer. The PrintControl.dll downloads automatically if it has not been previously downloaded on to the client computer, provided that the user that is currently logged on is able to download ActiveX controls.
    To enable the download of ActiveX controls on the client computer, perform the following steps:
    1) Open your Internet Explorer.
    2) From the Tools menu, select Internet Options.
    3) In the Security tab, select the web content zone that corresponds to your web application.
    4) Click Custom Level.
    5) In the Security Settings dialog box, scroll down to find the ActiveX controls and plug-ins section.
    6) Select Enable or Prompt for the Download signed ActiveX controls item.
    7) The print dialog box will now appear successfully when clicking the print button in the report viewer.
    If the above does not help, try to troubleshoot this as follows:
    1) click the print button (this will cause a postback to the web page) and then cancel the print dialog. right-click in the web page and select "View Source".
    2) Search for the word "printcontrol.cab". This will show you where the application is trying to download the printcontrol from.
    Paste the URL into a browser.
    3) If you get prompted to "open or save to disk" the url is correct and there is a browser setting or possibly even a system policy preventing the download.
    4) If you get a "404 page not found" or a similar error message, investigate the URL.
    5) If the issue is on your local web server, see if it is possible to browse to the URL in IIS manager.
    - Ludek

  • Error during printing: Ensure all parameters are defined

    Forum,
    I have the following issue on 8.81 PL08. When trying trying to print from the Outgoing Payment screen we get the following message: Error during printing: Ensure all parameters are defined.
    What parameters specifically would it be referring to?
    Regards,
    Juan

    Hi,
    IS the error occurred only in outgoing payment? or what changes have you done?
    Try to create new PLD copy from system PLD then edit the field.
    Everytime you inserted a fields try to run the PLD so that we can determine the problem.
    Thanks.
    Clint

  • Crystal Reports version 10  error when displaying report

    Hello: New member here, been lurking around for a while. A lot of good information here.
    I do hope this is the right place to ask this first question.  I have a customer that has a Crystal Reports 10 installation and cannot display reports since he upgraded from Crystal report 8 to Crystal reports 10
    The error he gets is pop message:
    CRAXDT error Occurred on Server Error Number: -2147221005 Error description: 006ASP 0177Server
    CreateObject Failed~800401f3
    Connection to the database is good we checked with query using SQL.
    Let me know what you think I should check next.
    I appreciate it.
    Thanks
    Damon

    1212487 - Error: "CRAXDRT Error Occured on Server. Error Number:-2147221005"
    Symptom
    A report is called through the Active Server Pages (ASP) Report Server to be displayed in the Report Viewer for ActiveX. However, the report is displayed with blank pages and when the viewer is switched to the Report Viewer for HTML the following error is displayed:
    "CRAXDRT Error Occurred on Server. Error Number:-2147221005 Error Description: 006ASP 0177 Server.CreateObject Failed~Invalid Class String"
    The same ASP application returns the report correctly when it is called from a client computer with the full version of Crystal Report 8 Developer Edition installed.
    Resolution
    It was found that the file, Emfgen.dll, was not installed and registered on the web server computer during the installation of the Crystal Reports ASP Reports Server. The report could be displayed correctly on the client computer, without Crystal Reports Developer Edition installed, after this file had been installed on the web server computer.
    For more information on installing the Crystal Reports web components please search for and download Scr8_WebManualInstall.zip from our website at:

  • Crystal report 9 memory error.

    we are using crystal report 9 with sybase power builder..... at some client locations we are experiencing the application crash due to memory while opening crystal reports.
    the following errors were noticed
    1.the instruction at "0x77124804" referenced memory at "0x001b3e60". the memory could not be read.
    2.the instruction at "0x7c911daf" referenced memory at "0x00000000". the memory could not be read.
    please guide us what is the issue.. do we need any hotfix or service pack for this.
    regards

    I assume you already tried to reinstall the application and I would recommend to do it one more time, but this time follow the process for so-called manual uninstall
    1. Uninstall Crystal reports 9 using add remove programs
    2. Save backup -up of the Registry
    3. Remove the following registry key (be careful with the registry file):
    HKEY_CURRENT_USER\Software\Business Objects\Suite 12.0\Crystal Reports
    4. Reinstall Crystal Reports 9
    As the next step I would check and disable Data Execution Prevention.
    Go to: Start> Right-click My Computer" select Properties> Advanced tab > click Performance settings> Data Execution Prevention tab.
    If DEP turned on for all programs, then add Crystal Reports (crw32.exe) to except list.
    If DEP is not cause of problems, then I would suggest Process Monitor to locate the reason or at least try to locate it.
    You can download Process Monitor utility from the following page:
    http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
    The same page will tell you how to use it. I would suggest the following steps:
    Close all unnecessary applications/processes
    1. Open Crystal Reports
    2. Start the Process Monitor, stop capturing events (Cntrl-E), clean the display (Cntrl-X), add the following filter (Cntrl-L) "Process Name is crw32.exe then include", click ok.
    3. Start capturing events (Cntrl-E)
    4. Immediately click Format menu on Crystal Reports
    5. Stop capturing events and save the log file
    Now you can look at the log file to see what is going wrong. I would also advice to capture the same log on client machine to compare the sequence of events.
    Gracias...!!

  • Seagate Crystal Reports ActiveX Designer error '80043ac4'

    Website slows down when users are running reports. Users start getting errors when running any crystal report. After sometime main page itself stops loading and only static html is visible. Following is one of the errors users see:
    Seagate Crystal Reports ActiveX Designer error '80043ac4'
    Invalid directory.
    /opera_mort2/report/AlwaysRequiredSteps.asp, line 54
    Other errors seen on reporting site at that time are
    Active Server pages error 'ASP 0115'
    Unexpected error
    /opera_mort2/report/rpt_level.asp
    A trappable error (C00000005) occurred in an external object. The script cannot continue running.
    authentication and network errors.
    Rebooting the Web Server temporarily fixes the issue however the error recurs again after a day or two. We are seeing this problem in both our PROD and DR server. There was no change done to either of these boxes recently.
    Also at this pint IIS was crashing. Microsoft Support analyzed the crash dumps created from IIS and came up with the following:
    "All the memory dumps captured showed the same DLL that was accessing corrupted memory. This same DLL would also be the one that had originally written to those addresses. The DLL was craxdrt.dll from Crystal Reports 8.0 ActiveX Designer, which was version 8.0.1.0 from 1/28/2000. This DLL should be updated to see if this issue has already been fixed. Other options are to recycle IIS more frequently and move to a new version of Crystal Reports."
    Here is a detailed analysis from Microsoft Support:
    The issue appears to be heap corruption. Normally these are difficult to troubleshoot, however, in this case every memory dump that I looked at had the same component involved.
    start end module name
    42b30000 4307f000 craxdrt (export symbols) craxdrt.dll
    Loaded symbol image file: craxdrt.dll
    Image path: C:\Program Files\Seagate Software\Report Designer Component\craxdrt.dll
    Image name: craxdrt.dll
    Timestamp: Fri Jan 28 15:16:46 2000 (3892235E)
    CheckSum: 0055446A
    ImageSize: 0054F000
    File version: 8.0.0.371
    Product version: 8.0.1.0
    File flags: 22 (Mask 3F) Pre-release Special
    File OS: 40004 NT Win32
    File type: 2.0 Dll
    File date: 00000000.00000000
    Translations: 1009.04b0
    CompanyName: Seagate Software, Inc.
    ProductName: Crystal Reports 8.0 ActiveX Designer.
    InternalName: CRAXDRT
    OriginalFilename: CRAXDRT.DLL
    ProductVersion: 8.0.1.0
    FileVersion: 8.0.0.371
    PrivateBuild: 8.0.0.371
    SpecialBuild: 8.0.0.371
    FileDescription: Crystal Reports ActiveX Designer Runtime Support
    LegalCopyright: Copyright (c) 1991-1999 Seagate Software, Inc. All rights reserved.
    LegalTrademarks: Copyright (c) 1991-1999 Seagate Software, Inc. All rights reserved.
    Comments: Crystal Reports for Visual Basic
    This component is from the year 2000 and needs to be updated. I searched our old cases and found several where old version of this component caused the same heap corruption.
    Please help as this is a production issue. Please let me know if you need any more information.
    thanks and regards
    sudatta soman

    Something must have changed. Were any patches or auto updates done to the OS?
    CR 8.0 has been out of the support cycle for some time now.
    As Microsoft suggested please log in and download the patches for CR 8.0 from:
    https://www.sdn.sap.com/irj/sdn/businessobjects-support
    If that does not resolve the issue the only option will be to schedule sn IIS restart each night.

  • Logon failed. Details: mscorlib (Crystal report error during print &export)

    Hi,
    I'm encountering the problem that the crystal report is working fine in the staging server I developed.
    However, after I transported to live server the report having problems when printing and exporting.
    Below is the error message prompts to me.
    Logon failed. Details: mscorlib : Could not find file 'C:\Inetpub\wwwroot\rptPrintSummaryConfineSpace.xml'. Error in File C:\WINDOWS\TEMP\rptPrintSummaryConfineSpace {2D72226E-816A-4D9B-BF93-C9077001F09C}.rpt: Unable to connect: incorrect log on parameters.
    I hit this error when I click OK button on export or print option page.
    My temp folder at windows is given full permission for IIS_WPG and ASPUSER.
    Please help to resolve my problem thank you very much.

    What version of Crystal Reports?
    What CR Service Pack are you on?
    What is the database?
    How are you connecting to the databse (ODBC, OLE DB, etc.)?
    - Ludek

  • Unhandled COMException Message: No Error. during printing some reports, extend Exception Info

    Hi,
    i'm using Crystal Reports for VS version 13.0.13.1597 with Visual Studio 2013
    Unfortunately I get a COMExeption when trying to Print some reports after previously displaying a preview using the CrystalDecisions.Windows.Forms.CrystalReportViewer Component.
    System.Runtime.InteropServices.COMException was unhandled by user code
      HResult=-2147483648
      Message=
    No Error.
      Source=rptcontrollers.dll
      ErrorCode=-2147483648
      StackTrace:
           at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.GetPage(PageRequestContext pPageRequestContext)
           at CrystalDecisions.ReportSource.EromReportSourceBase.GetPage(PageRequestContext pageReqContext)
           at CrystalDecisions.CrystalReports.Engine.FormatEngine.QueryPageSettingsEventHandler(Object sender, QueryPageSettingsEventArgs e)
           at System.Drawing.Printing.PrintDocument.OnQueryPageSettings(QueryPageSettingsEventArgs e)
           at System.Drawing.Printing.PrintDocument._OnQueryPageSettings(QueryPageSettingsEventArgs e)
           at System.Drawing.Printing.PrintController.PrintLoop(PrintDocument document)
           at System.Drawing.Printing.PrintController.Print(PrintDocument document)
           at System.Drawing.Printing.PrintDocument.Print()
           at CrystalDecisions.CrystalReports.Engine.FormatEngine.PrintToPrinter(PrinterSettings printerSettings, PageSettings pageSettings, PrintLayoutSettings layoutSettings, Boolean reformatReportPageSettings)
           at CrystalDecisions.CrystalReports.Engine.ReportDocument.PrintToPrinter(PrinterSettings printerSettings, PageSettings pageSettings, PrintLayoutSettings layoutSettings, Boolean reformatReportPageSettings)
           at CrystalDecisions.CrystalReports.Engine.ReportDocument.PrintToPrinter(PrinterSettings printerSettings, PageSettings pageSettings, Boolean reformatReportPageSettings)
           at Soloplan.CarLo.Printing.PrintAdapterCrystalReports2011.Print() in c:\project.net\Soloplan\CarLo\Printing\PrintAdapterCrystalReports2011.cs:Line 1528.
      InnerException:
    As you can see the error message is a bit short on information what went wrong, especially the Message: No Error.
    Is there any possiblity to extend the information on this exception?
    The behavior is reproducible with some reports, while others work just fine, and even with the problematic reports it only when the call of the Print function is done while the preview is shown.
    I hope someone can point me in the right direction.
    Thanks
    Johannes

    Wow. It's been a long, long time since I've seen CR throw error: no error (like v. 4.5 or so...). Used to chuckle about it - I think I even saved a screenshot of it
    It will be good to have more info on this:
    Win or web app?
    Printer used.
    Printer driver name and version.
    The reports that do not work throw the error consistently?
    Code used to print the reports.
    Is this a threaded app?
    Do you get the issue printing from the viewer?
    Do you get the issue printing from the designer viewer?
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow me on Twitter

  • Error during Print preview

    Hello everyone,
    I get this error "Database disconnected,  Choose the 'ok' button to exit the database" on several workstations. This does not happen on the server at all. It happens when we are trying to preview a sales order, purchase order or a production order. This system shows this message and shuts down. this also happens when  I click on the print layout manager. I have reinstalled SAP several times but the issues still continues to show up. This happens on SAP 8.82 patch level 14.
    I would really appreciate if any one has a solution to this problem.
    Thank you
    Chintan

    Hello,
    The error message SSFCOMPOSER002 indicates 'No runtime object exists for form '. I just want to confirm the below point:
    In Quality,
    could you please go to the transaction code - 'SMARTFORMS' and give the smartform name ?
    Then, execute the form directly and check whether you are getting the interface program name.
    If any issues is there, then re-transport the smartform once again (please do not forget to activate the smartform once again before assigning to the new TR) to the quality.
    Kindly tell me if the issue is some other.
    Regards,
    Selva K.

  • Crystal Reports 8 stopps working when printing

    I recently upgraded to CR 8 along with several other co-workers. I am able to launch the app and create reports just fine, but when I attempt to go to anything that has to do with printers, the app errors out.
    When I attempt to print directly from the app, I get a message saying that Crystal Reports has stopped working and it asks if I want to close or debug.
    When I attempt to go to the Page Setup, I get an error message saying "Out of Memory"
    Other team members do not have these issues.
    I have tried re-installing the app, but am still getting the same problems.
    I am able to export the report and print from there, but not directly from CR 8.
    I attempted to instal Service Pack 3 and got an error message saying that I did not have a recent enough version of the app.

    Hi Dave, 
    First off, please minimize any version confusion.  You keep referring to Crystal 8 which is over 10 years old but you told Don you are using Crystal 2008.  That would definintely cause problems. 
    If you are upgrading from XI r2 and you are getting that upgrade message, that leads me to believe Crystal XI wasn't properly upgraded on your machine.  I think the 2008 sp3 upgrade is still seeing XI r2.  This may also be the reason 2008 is crashing when you try printing. 
    When you open Crystal 2008, go to Help | About Crystal Reports.  I'm interested in knowing the version number. 
    When you uninstalled Crystal, what version is listed in the Add/Remove Software?  What version did you uninstall? 
    Did you get any error messages when you uninstalled? 
    Thanks,
    Brian

  • How to print a crystal report in Tally MT691 line printer?

    I have recently developed a crystal report with version 8.5 in windows-based operation system (windows xp). My client today told me that the report has to be able to print to a network printer - line printer (Tally MT691); otherwise, the crystal report I developed becomes useless. I have no experiences with line printer. Could you please give me some instructions on how to make it happen?
    Any help is greatly appreciated. Thanks again.
    <MOVED BY MODERATOR TO THE CORRECT FORUM>
    Edited by: Alvaro Tejada Galindo on May 7, 2009 11:05 AM

    Hi
    Unfortunatelly you need to worry about the printer, please don't consider the last replies.
    As far I can see this model is a dot matrix printer, only the following models are supported for SAP B1:
    For 2005A those are the supported models:
    - Citizen PROdot 300    
    - Epson FX-880          
    - OKI MICROLINE 320 Elite
    - Epson FX-890          
    For the 2007
    - Citizen PROdot 300    
    - Epson FX-880          
    - OKI MICROLINE 320 Elite
    Please note that some workaround can be found to use different printer but only the mentioned devices are supported. Those workarounds may work in one patch but may stop to work after patch or version upgrade.
    Also a multipurpose (combine fax, printer, scanner) devices are also note supported (SAP Note 925841).
    Paulo Calado
    SAP Business One Forums Team

  • Why Would Crystal Reports read more than it prints

    Hi everyone,
    In my case My record selection is based on the following:
    {FACILITY}=1
    And {payment_code} In ["110","111","112","115","116","117"]
    And {service_code} = "COPAY"
    And {date_of_receipt} in [{?From Date} to {?To Date}]
    And yet for any parameter selection set crystal reports would read - say - 1000 records but prints only 25 records, the question is if the records found according to the selected values from parameter and the record selection formula, is only 25 records, then why would it read 1000 records? what is the reason? and how to avoid it?
    Thanks in advance!

    It may also be what the numbers are telling you is the filter (WHERE) cannot be pushed down to the Server so CR has to filter it client side on the second pass.
    Likely due to the data range, quite often the date format is not compliant to the Server so CR has to "interpret" the date format so it ends up filtering client side.
    Try commenting out that part of the selection formula and see if you get the same number of records read. If you do then you could try using a SQL Express to convert the date fields or possibly using a Command and Command Parameter to set the date range may work for you. This way the DB is definitely getting the date formatted for it's server side use.
    Don

Maybe you are looking for