Crystal Report Server issues

Hi,
1) Where to find for documentation for Crystal report server XI installation on server machine.
2) which approach to follow for reports to support 20 concurrent users creating/updating reports
and also to support over 100 users viewing/generating reports from VB.Net front end?
such as crystal report viewer model, report document model, info view model, crystal RAS. We will have Crystal Report Server XI, SQLserver 2005. These reports are yet to be developed.
3) And also allow users to approve reports before general distribution and ability to automate report generation and deliver reports via email from VB.Net front end?
I have worked on Crystal designer as well as on integrating report Visual Basic. I am new to above requirements.Any ideas greatly appreciated.

1) Where to find for documentation for Crystal report server XI installation on server machine.
See "setting up the development environment" here:
https://boc.sdn.sap.com/node/10619
You have to follow same instructions when setting up a production environment as far as the runtime is concerned.
2) which approach to follow for reports to support 20 concurrent users creating/updating reports
and also to support over 100 users viewing/generating reports from VB.Net front end?
such as crystal report viewer model, report document model, info view model, crystal RAS. We will have Crystal Report Server XI, SQLserver 2005. These reports are yet to be developed.
See the following resources:
https://boc.sdn.sap.com/node/972
https://websmp106.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000713358&_SCENARIO=01100035870000000202
3) And also allow users to approve reports before general distribution and ability to automate report generation and deliver reports via email from VB.Net front end?
https://boc.sdn.sap.com/samples/84/1194
https://boc.sdn.sap.com/developer/library
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10b840c0-623f-2b10-03b5-9d1913866b32
Ludek

Similar Messages

  • Issue with Crystal Report Server

    Hi,
    I have a .Net application that uses Crystal Reports Server. The application runs from two servers through load balancing and one of them hosts RAS(Report Application Server) component as well. The issue I am facing is that the server that does not host RAS gives a timeout error periodically when reports are run, inspite of RAS running fine in the other server.
    Can anyone let me know if this problem has been identified before?
    Regards,
    Ashwin

    Hi Ashwin,
    What is the error message you are getting?
    After how many minutes does the timeout error occur?
    What is deployed on each of these 2 servers?
    Can you please provide some more details on the workflow that causes the timeout?
    Thanks
    Jonathan

  • Crystal Report Server 2008 Import Issues - Missing report schedules/history

    Hello all,
    I have recently on a test machine installed Crystal Report Server 2008 V0. I then created several test reports and put them on the server and created schedules and a history for each one.
    Once this was done I exported the information into a BIAR file. Uninstalled CR Server 2008 V0 and installed CR Server 2008 V1 SP3.
    I then imported this BIAR file. After the import my reports are there, but all schedules and history are lost? Is there a way around this? How can I ensure all schedules are brought over in the import?
    Please note I followed this workflow: http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/5048d962-8fa6-2c10-e2ae-d32b3562cb9c
    Comments on it seem to indicate this is a common issue.
    Thanks!
    Edited by: Rick J on Jan 5, 2012 9:59 PM

    Good day Philippe,
    You have been able to solve my issue, thank you! In following the instructions I didn't notice the "Import all instances" tick box, I simply assumed hitting select all would work and glazed right over it. So this was certainly user error on my part.
    Thank you so much for the information!
    - Rick

  • Crystal report server 10 license troubleshooting issue

    I got the following errors on my crystal report server 10 these few days and the number of errors increase.
    I found that the crystal license will be used by alot of system connections when the licenses runs out.
    Currently we have 18 concurrent crystal licenses.
    However, the timing of these errors varies to the time of the crystal license 1 or 2 hours before.
    1. Invalid printer specified.
    2. Unable to connect: incorrect log on parameters.
    3. Object could not be scheduled
    Is there a correlation between these crystal report errors with system connections and licenses run out issue?
    Is there any tool for me to troubleshoot this crystal license issue?
    I am using crystal enterprise 10 report server together with a few cluster report servers.

    You need to go to https://websmp203.sap-ag.de/support and sign-up. You will be asked to fill in your installation or partner number (if applicable). Depending on this you will get access. I'm not sure if you a charged. Creating an OSS note should be covered as part of the 'standard' support contract.
    Hope this helps...
    Martijn van Foeken
    Focuzz BI Services
    http://www.focuzz.nl
    http://nl.linkedin.com/in/martijnvanfoeken
    http://twitter.com/mfoeken

  • Crystal Reports Server XI R2 - RAS service will not start

    We had a copy of Crystal Reports Server XI R2 running on a Windows 2003 SBS Server and the database running on SQL Server 2000 on the same box. We were forced to upgrade this server Windows 2003 SBS Server 2003 R2 with SQL Server 2005. The upgrade worked fine however after the upgrade we could no longer open reports in infoview.
    We soon realised that the RAS(Report Application Server) service was stopped however we could not start it.
    We tried doing a full uninstall(deleting the directory and registry info) and reinstall several times on the same server pointing to the existing database and trying to create a new database in both MYSql and SQL Server but again the same problem. While our licensing agreement means we can only install it on one server we tried on another and again we had the same issue.
    We see several errors in the event viewer of the server, these are:
    -Unable to create the Corba OSCA factory and register it on the eBus (Source:BusinessObjects_crystalras)
    -Failed to register with the CMS 'Server Name'. Please make sure the CMS is up and running. Attempting an automatic retry. (Source: We see this error show on a fair few of the service after stopping and firing up services, but they seem to disappear)
    -An error occurred while creating a Page Server subprocess.(Source: BusinessObjects_pageserver)
    If I try firing the crystalras executable just for interest sakes I get a "No valid license found for this product" error.
    We thought it may have been a license issue caused by the upgrade but have been told that the license key still appears to be valid.
    Any help is appreciated.

    Hey did anyone ever answer your question, I have exactly the same problem 4 years later, sigh

  • Invalid Key code Error while installing crystal report server 11

    While installing crystal report server 11,i am facing an erro which says Invalid Key code Error.I had raised this issue to SAP customer support and attaching the conversation that we had.PLEASE HELP me to resolve the issue.
    MAILS--Dear Mohit,
    Thanks for the patience.
    We have received the below update from the Licensing Team.
    You received your permanent key in respect of these licenses - the key is  for Crystal Reports Server XI.
    You did not purchase these licenses for Crystal Reports Server, but purchased it for Crystal Reports and a 5-named user license for Crystal Reports was included as a special offer.  The software included was version XIR2, but you elected to use version XI instead and received key .
    You would need to enroll the licenses in maintenance if you want to upgrade them.
    In case of any queries please create a ticket via the Service Market Place.
    Regards,
    Jessy
    Customer Interaction Center
    SAP Active Global Support
    Hello Jessy,
    The customer received their permanent key in respect of these licenses - the key is  for Crystal Reports Server XI.
    They did not purchase these licenses for Crystal Reports Server, they purchased Crystal Reports and a 5-named user license for Crystal Reports was included as a special offer.  The software included was version XIR2, but they elected to use version XI instead and they received key .
    They cannot decide to upgrade now - they must enrol these licenses in maintenance if they want to upgrade them.
    Kind regards,
    Rosemary
    From: BOSAPASIA
    Sent: 29 September 2009 05:49
    To: Savage, Rosemary
    Subject: FW: Crystal Reports Server Installation Issue
    Importance: High
    HI Rose ,
    Need your assistance on the below issue.
    Customer purchased Crystal Report Server XI R2 in 2005. When he is trying to install it now, he is getting an Invalid Key code Error.
    He has provided us the Scanned copies of the Key code and the registration number.Can you please help and check if he can be provided with a Keycode.
    Regards,
    Jessy
    CIC Team Lead
    Customer Interaction Center
    Global Support Centre India
    SAP Labs India Pvt Ltd
    Hi,
    Providing you with the required details to proceed further
    Registration Number-
    Registration Email Address-taxmantra.support
    And also please find attached the scanned copy of the Registration key we got for the Crystal report server.
    Dear Mohitk,
    Thank you for your information.
    I checked with the concerned colleague and received the below update:
    Please check from where you got this key code. If from a paper, please scan it to us. Please let them track to the original paper or email.
    If you have registered the key code, please provide us the registration number or registration email address so that we will try to check for you.
    If you did not register before, as the promotion is over so the key code could not be replaced.
    I request you to kindly check the same at your end and revert with the details.
    Moreover, there are two ways for Crystal Report customer to get support.
    One is customer with bundled product such like BOE and under maintenance. These customers will have an S-user ID and password to log a case in service market place via http://service.sap.com/message
    A learning map was provided, listed on left column.
    The other is customer with only Crystal report product, the support is via SDN.
    http://service.sap.com =>Crystal Reports and Xcelsius Support=>Crystal Reports and Xcelsius Forums
    Customers can first check whether other customer has got the same issue and find the reply from our engineers.
    You may also post your own thread for support.
    Anything else I could help, please do not hesitate to contact again.
    Hi,
    I am providing you with the details required to resolve the issue related to Crystal report installation,for reference of the issue please refer the mail below.
    Please find attached the Scanned Document  containing the details as per the details required by you.
    Hope to see a quick resolution for the issue.
    Dear Mohit,
    Thank you for your e-mail.
    As discussed, I understand that youu2019ve procured Crystal Reports Server 11 in 2006. However youu2019re facing issues with key codes while reinstalling the same. We request you to kindly provide us with below details for further assistance.
    Your customer number:
    Your customer name and address:
    Purchase order number:
    Any other products purchased along with Crystal Reports Server 11
    Any S-User Id:
    Any old case ID:
    Please feel free to contact us if any further queries.
    Hi,
    I am raising this concern on behalf on Taxmantra project (Tata Consultancy Services noida).
    We have bought licensed Crystal Reports Server 11 near by 2006.We are trying to install the crystal server but while installing ,we have encountered with an error message that:-
    "The product key code you have entered is incorrect"
    We are facing the same issue in 2006,I am attaching with this email the conversations that was held in 2006 to get the correct key code.
    Please help us to resolve the issue as early as possible.
    My contact number:
    If you need any further information do let me know

    Ajit,
      By design, the product is not able to be installed under the superuser account.
    1.  Create a new user and specify a home directory for the user without a quota set.
    2.  Copy or move the installation files to a directory that the new user can read.  I suggest you move the installation files directly into the new user's home directory.
    3.  Logon as the new user (or su - newuser)
    4.  run the installation shell script using that new user's account.
    NOTE:  Ensure the system meets the requirements from the supported platforms documents.
    .Tony

  • Report Not Refreshing in Crystal Reports Server 2008

    I created a report and posted it on Crystal Reports Server 2008.  I have since updated the report's selection expert and I want the new criteria to be updated.  When I right click on the report and choose Refresh Options I have chosen to update and refresh the report but when I try to schedule it again it keeps the old select expert statement.  I have gone back to the report to ensure the change was taken and it was.  In fact if I delete the report and repost it then it does show the correct criteria.  Does anyone have any idea's as to why this is happening.  Thanks.

    A simple solution to avoid the font issue: Draw a box on the report, and put an X in (on top of) the box to check it if value is true.
    Or
    A formula that is an X if true or F if false.  Format the font to be white if not an X, and put a box around it.
    Edited by: DebiHerbert on Oct 8, 2010 1:19 PM

  • Crystal Report Server Database Log File Growth Out Of Control?

    We are hosting Crystal Report Server 11.5 on Microsoft SQL Server 2005 Enterprise.  Our Crystal Report Server SQL 2005 database file size = 6,272 KB, and the log file that goes with the database has a size = 23,839,552.
    I have been reviewing the Application Logs and this log file size is auto-increasing about 3-times a week.
    We backup the database each night, and run maintenance routines to Check Database Integrity, re-organize index, rebuild index, update statistics, and backup the database.
    Is it "Normal" to have such a large LOG file compared to the DATABASE file?
    Can you tell me if there is a recommended way to SHRINK the log file?
    Some Technical Documents suggest frist truncating the log, and the using the DBCC SHRINKFILE command:
    USE CRS
    GO
    --Truncate the log by changing the database recovery model to SIMPLE
    ALTER DATABASE CRS
    SET RECOVERY SIMPLE;
    --Shrink the truncated log file to 1 gigabyte
    DBCC SHRINKFILE (CRS_log, 1000);
    GO
    --Reset the database recovery model.
    ALTER DATABASE CRS
    SET RECOVERY FULL;
    GO
    Do you think this approach would help?
    Do you think this approach would cause any problems?

    my bad you didn't put the K on the 2nd number.
    Looking at my SQL server that's crazy big my logs are in the k's like 4-8.
    I think someone enabled some type of debugging on your SQL server, it's more of a Microsoft issue, as our product doesn't require it from looking at my SQL DB's
    Regards,
    Tim

  • Do I need to uninstall Crystal Reports Server 2008?

    Hello,
    We recently installed Crystal Reports Server 2008 and began migrating reports off the CR Enterprise 9 platform and things were going pretty well.
    One of our other locations began moving over their reports that are ran against an Oracle database and cannot get passed a connectivity issue. We found the following:
    Oracle connectivity issues
    If you are installing Crystal Reports Server 2008 V1 on a 64-bit Windows
    platform, Oracle database connectivity issues may occur. If Crystal Reports
    Server 2008 V1 is installed to a location that contains brackets in the folder
    path, for example, C:\Program Files (x86)\, it will be unable to connect
    to an Oracle database. Certain Oracle database clients such as version
    10.2.0.2 or 10.1.0.2, may not function properly with any application that
    has brackets in its folder path. When installing Crystal Reports Server 2008
    V1, select an installation path that does not contain brackets, such as
    C:\Program Files x86\ or contact Oracle support for an updated database
    client.
    We of course have everything installed in the default (x86) folder. My question is, is there a way to move the installation, or do I need to uninstall/re-install? If I need to re-install, is there a way to back-up and reload all of my existing jobs?

    Hello,
    CR must have the Oracle client installed. Unless you use a Wired Driver, which has the client engine built in, CR requires a client to be installed. It never has worked without the client installed.
    Also, I've found that if you have more than one Oracle client installed it causes problems. Make sure the first one in the PATH statement points to the latest version of the client.
    And yes you are correct, ODBC is a layer on top of the native client so it will be slower obviously because it has to go through one more layer of dll's to get to the server.
    Thanks again
    Don

  • Crystal Report server error

    I'm new to posting here, so please bear with me!  I have installed, in this order, crystal report server XI R2 .Net server 2005 (used as a viewer for reports in our web application), Crystal report server XI (BO), Crystal Report XI, BO XI SP4 on Windows Server 2003 R2 running as a VM.  When I first install crystal report server XI R2 .Net server 2005, open our web app and run Crystal reports, they run just fine.  After installing BO XI, Crystal Reports XI and BO SP4, I get an error:
    Server Error in '/ImageWorks' Application.
    Not enough memory for operation.
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
    Exception Details: System.Runtime.InteropServices.COMException: Not enough memory for operation.
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. 
    Stack Trace:
    [COMException (0x80041004): Not enough memory for operation.]
       CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
       CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +87
       CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +279
    [Exception: Load report failed.]
       CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +341
       CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) +964
       CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename) +73
       roi_AdminReportViewer.Page_Load(Object sender, EventArgs e) +83
       System.Web.UI.Control.OnLoad(EventArgs e) +99
       System.Web.UI.Control.LoadRecursive() +47
       System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1436
    Version Information: Microsoft .NET Framework Version:2.0.50727.1433; ASP.NET Version:2.0.50727.1433
    I have loaded this same configuration on similar servers over the past 2 years with no issue.  Can anyone help me?  Doesn't look like the memory is being touched on the server, it's an IIS server with 1.5 GB RAM.

    Hi Elaine,
    So everything worked fine until you installed CRXI and BO R2 SP4?  Let me know if the order of installation I have below is correct:
    1.  crystal report server XI R2 .Net server 2005
    2.  Crystal report server XI (BO)
    3.  Crystal Report XI
    4.  BO XI SP4 
    I know the .net viewer is usually set up in the Crystal Reports Server installation.  I'm unsure as to why you have it listed separately.
    Also which version of BO (Crystal Reports Server) are you installing (R1,R2,R3)?   Could you clearly outline your first 2 installation steps?

  • Crystal Reports Server XI error in Infoview

    We have an old Windows 2000 server that was running Crystal Reports Server XI (not R2) and we recently reinstalled it on a Windows 2003 server and imported all the reports.  All scheduled reports work find however in Infoview if we click View Latest Instance I get the following error:
    "An error has occurred: File or assembly name CrystalDecisions.Enterprise.Desktop.Word, or one of its dependencies, was not found."
    In the Application Event log on the server I get the following 3 errors at the same time.
    "Failed to connect to server. Error: 0x80070005"
    "Detection of product '{5A5C2A47-52AC-4715-9A6C-E4433B2DDDEF}', feature 'DotNETSDK' failed during request for component '{90C1F7A4-6DFD-4F1F-A5D2-923F04D9D77B}'"
    "Detection of product '{5A5C2A47-52AC-4715-9A6C-E4433B2DDDEF}', feature 'DotNETSDK', component '{54EC1C27-1B41-4A53-8E89-8F8D13E78AB8}' failed.  The resource '' does not exist."
    it looks like a permissions issue.  Has anyone seen this before?
    Mike

    Post Author: krishna.moorthi
    CA Forum: General
    Hi,
    I am new in Crystal Report Server XI .
    I am facing the problem to passing dyamic parameters and connection information to the report in the ASP.Net and C# environment.
    can u give me the tips for dynamic passing parameters and connection to the report?
    waiting for your reply.
    thanks in advance

  • Crystal Reports Server 2008 trial install - unable to log into CMC

    Hi,
    I have been looking for a way to host my existing Crystal XI reports on our in house web application rather than using a thick client application with cview. I was told that the options were Crystal Reports Server 2008 or Visual Studio 2008. I have downloaded trials of both and am currently testing.
    After installing Crystal Reports Server 2008, including MySQL DB and Tomcat web server, i am unable to log into any of the applications with the error that:
    Error: Server SCOTTPC:6400 not found or server may be down (FWM 01003) null
    After seeing this i checked the services on my test machine and found that the Server Intelligence Agent was not started. So i tried starting it and recieved the generic windows message:
    Service on local computer started and them stopped. Some services stop automatically if they have no work to do ... etc
    After multiple reboots and reinstalls i am still unable to use any aspect of the application as i am unable to log into the CMC as the server is down. Now i am new to Crystal reports and web servers so have a very limited knowledge of whats going on here - i am primarily a DBA. From what i can tell MySQL does not even appear to be installed but i cannot be sure.
    Any suggestions?

    ok... after research it seems a DSN has not been created.
    Also when trying to start the server intelligence service i see the following in the application event viewer:
    [Node Name: SCOTTPC]
    [User Name: SYSTEM]
    Server Intelligence Agent has failed to initialize because the bootstrap file C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\_boe_SCOTTPC.bootstrap is missing information about the CMS cluster. Please restore your bootstrap file from your backup.
    i have recreated the bootstrap file but still get the same error.
    i have SQL Server 2005 installed on this rig as well - could this be causing the issue? Would it be better for me to integrate this to SQL Server rather than using the MySQL DB that comes with Crystal server 2008?

  • Migrating all configuration  from Crystal Reports Server XI R2 to Crystal Server 2013

    Hi,
    We're running an old Crystal Reports Server XI R2 SP version (boe 11.5)  and we're planning to start using Crystal Server 2013
    As far as I know no upgrade is possible and that's not needed either.
    Instead I'm interested in the migrate possibilities. I saw this thread but it doesn't answer all the questions https://scn.sap.com/thread/3462417
    So first I will install Crystal Server 2013 on a new server and then I use some migrate tool.
    Questions:
    - does the migrate tool support migrating from my version CR server XI R2 SP1  to  Crystal Server 2013 ?
    - does the migrate tool copy all report schduling information (recurring schedule, destination etc)? We have ~1000 scheduled reports so doing manually is not an option
    - does the migrate tool copy Business views/Business view connections ?
    (- odbc data sources are probably not copied but that's ok)
    -Mikael

    Hi Mikael,
    Since you're already on CR Server XI R2, you can use the Upgrade Management Tool to migrate all the content to CR Server 2013.
    Anwers to your questions:
    1) Yes, the Upgrade Management Tool does support this kind of migration
    2) It does seem that the UMT allows you to move all report instances as well as the scheduled jobs over to the new server
    3) I've always had issues with Business Views when using Import Wizard however I'm not sure whether they work well with the new UMT. In any case, I always prefer to export the LOVs and BVs from within the Business View Manager to a .xml file and then import them in the higher version of the Server, again, from within the Business View Manager.
    -Abhilash

  • Migrating Crystal Reports Server XI to a new Server

    Post Author: david_okeefe
    CA Forum: Deployment
    Hi,I am trying to migrate an existing Crystal Reports installation from an old server to a new server.  To prevent interruption of service, the new server must be able to be online at the same time as the old server (thus it must have a different name).  I installed Crystal Reports Server XI and told it to create its CMS database by copying the existing CMS database.  Unfortunately, I received an unspecified error ("failed to received first object from source database").  After that, I opted to create a new, default CMS database.  I tried using the import wizard to migrate the reports to the new server.  The import wizard managed to bring over all of the folders, users, and groups, but not any of the reports.  When I looked at the migration log, it gave me an error stating that it could not find the parent folder.  I have no real idea how to address this issue.  On a related note, I also do not know how to point crystal at the reports repository on the new server.  I tried using the Data Source Migration wizard to copy the reports from the old server to the new server.  Unfortunately, it didn't appear to register any of the new reports.  Given what I have already tried, I am not sure how to proceed.Any help would be appreciated.Thanks,David

    Post Author: david_okeefe
    CA Forum: Deployment
    Hi,I am trying to migrate an existing Crystal Reports installation from an old server to a new server.  To prevent interruption of service, the new server must be able to be online at the same time as the old server (thus it must have a different name).  I installed Crystal Reports Server XI and told it to create its CMS database by copying the existing CMS database.  Unfortunately, I received an unspecified error ("failed to received first object from source database").  After that, I opted to create a new, default CMS database.  I tried using the import wizard to migrate the reports to the new server.  The import wizard managed to bring over all of the folders, users, and groups, but not any of the reports.  When I looked at the migration log, it gave me an error stating that it could not find the parent folder.  I have no real idea how to address this issue.  On a related note, I also do not know how to point crystal at the reports repository on the new server.  I tried using the Data Source Migration wizard to copy the reports from the old server to the new server.  Unfortunately, it didn't appear to register any of the new reports.  Given what I have already tried, I am not sure how to proceed.Any help would be appreciated.Thanks,David

  • Crystal Report Server: Cannot save Database Configuration in CMC

    I already posted this question as SAP internal CSN message (message number 1896093 2009) but did not get any answer so far.
    I have installed a test version (which I'd like to become permanent some     
    day...) of Crystal Reports Server 2008 on a local machine to be able to      
    share Crystal reports within our department.                                 
    I created a couple of reports which I would like to get updated              
    regularly. The issue is here that I get a logon screen to the underlying     
    SQL Server as soon as a user clicks on "Refresh" when viewing a report       
    from InfoView. The SQL Server is running on integrated security              
    via SSO, which I cannot change...                                            
    To get around this issue I would like to change the default Database         
    Configuration of the reports. Hence I do the following:                      
    1) I open the Central Mangement Console                                      
    2) I select one of my reports                                                
    3) Rightclick on Properties                                                  
    4) On the Default tab I select Database Configuration                        
    5) the config is set to "Logon Screen" and I ant to change this to SSO,      
    so I set this                                                                
    6) Now I click on Save                                                                               
    => The setting is reverted to the old "Logon Screen" settin1g                                                                               
    This behavior is the same for all the reports I'm using.                                                                               
    Looking forward to any help, kind regards                                    
    Wolfgang
    P.S.: Ultimately this issue arises, because I cannot refresh my crystal report data in batch job mode, because the reports are reading data from an SQL server, which allows SSO-logon (integrated security) only. Thus I have to open each and every report for update manually and click on the refresh button.
    Edited by: Ralf Wolfgang Geithner on Jul 3, 2009 11:00 AM

    Hi Manish,
    thanks for your answer. Unfortunately I'm still stuck in this matter.
    Does this happen with the sample reports too? I think it will be a good approach to try this to see if your system is behaving differently for sample reports and reports published from outside
    I did not really try this, but viewing and editing my reports in Crystal Reports 2008 Designer works perfectly fine. As well can the user view my reports in the InfoViewApp.
    Also, does it revert to the login screen setting immediately after you click Save or does it show the setting as changed after clicking Save but, does not retain it when you come back and check the report settings again?
    The data is reverted immediately after clicking "Save"
    Kind reagrds
    Wolfgang

Maybe you are looking for