Crystal Report Viewer Error: Could not render the page

Hi,
I was facing the same issues whereby i creating my crystal report in VS2005 profesional built in crystal report designer. When preview in VS2005 the graph displayed correctly. However, when export to IIS it shows the error could not render the page.
I am using Windows 2008 server, IIS7.
I tried to install the CRREDIST x86.msi into my server, however it still could not show out the graph (pie chart) in the localhost.
Appreciated anyone know this could kindly advice.
thanks.
ck

Hello,
Crystal Reports 10 is not supported on Windows 2008 Server.
Please view the information [here|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]
Upgrade the Crystal Reports.
Thanks,
Bhushan.

Similar Messages

  • Web Intelligence report scheduling: Error "Could not open the file"

    Hello,
    we are on BO 4.0 SP9 Patch 1.
    Since the update to this patch level we have intermittent failure of scheduled reports in Web Intelligence.
    Error message is: "Could not open the file *.wid"
    There has been neither a change of the report nor a promotion.
    Former schedules finished successful.
    SAP note search or SCN search only showed notes with the issue that this error occurs after a promotion.
    Does anyone has experiences with this error?

    Hi Sebastian,
    If Hot Back is enabled I would suggest turning this feature off unless it’s a business requirement.
    In addition as a workaround in the reoccurring jobs set the number of retries to something greater than 0.
    This issue was fixed in BI4.0 SP08, I would suggest opening an incident with support.
    Hope the above helps
    ~Valdrin

  • 'Not enough memory' + 'Internal error' x 'Could not render the database' = Parting of company :(

    I can’t believe the amount of concern / disappointment / frustration spread across every associated Fireworks forum re: CS5’s
    "An internal error occurred"
    "Could not render the database"
    "Not enough memory"
    "Crash without notification"
    Etc.,
    We installed the CS5 trial – being more than wary about Adobe’s past releases – and lo and behold, all of the above beared ‘true’!
    This is nothing new of course, we’ve all been experiencing this since CS3 – but hoping against hope - a newer release would solve the poor memory management and general ‘bug-ridden’ code; alas - as per usual, Adobe has not responded with any pro-solution based action, but successfully furthered our frustration with a couple of fresh gimmicks without strengthening the core software.
    As an avid fan of adobe software […and a Fireworks freak] working in a design house that has many different employees with widespread software tastes – I eventually said ‘enough is enough’ after the umpteenth crash [as of 3 weeks ago] and have revisited the Rebel Alliance; ‘yes, CorelDraw’!  No I’m not going to go into some tirade about how much better Corel is etc. - as it has its own strengths and weaknesses, too […but without the hourly crashes] – so to be honest, we figure the time increase in some projects due to using Corel […time is diminishing with each project’s acquired experience] are negated by the downtime of Fireworks; so far, this is holding true.
    This may seem drastic, but it has been a long time coming – that is, implementing a move from our decade invested workflow to a ‘somewhat’ new schema, but due to the disappointing aforementioned, eventually principal / expenditure comparisons / sanity / lack of support all culminate to such, and if there’s no support for the competition, well – then there is ‘no’ competition; a luxury Adobe has taken for granted way too long.
    I truly hope Adobe turns around and fixes their ways, until then – we’ll be supporting those that do – and hopefully along the way, just maybe, with the added funds from disgruntled adobe x-pats – the software will far exceed what I used to love and adore […how I miss macromedia]; honestly, it would be near on impossible to argue which suite was better ‘either way’ – so it may not be such a distant future. Besides, with the market-door Adobe is opening due to such poor software, the new player sniffing around the edges will be welcomed by many with open arms; I know my/our allegiance will go straight to the company with the greatest software stability and sound support, whomever that maybe.
    So here’s to hoping no more, and actually doing! Very sad...

    I am also getting this error message. It happens randomly. Adobe help told me to close and reopen FW and then it stopped happening.  Does this sound like a good solution to anyone?

  • CS4 - "Could not render the database. An Internal error occured"

    I just purchased FW CS4 (full) to replace my ancient
    Fireworks 4 (yes, *4*). Unfortunately, CS4 tries to update text in
    my old FW files and promptly displays a message "Could not render
    the database. An internal error occured." It would really suck if I
    bought this but cannot edit my old FW files! Anyone else having
    this trouble and know of a solution?
    I am using Windows Vista Home Premium on a Dell XPS 420 with
    a quad core processor.

    Can you try the following solution posted at another Thread
    which relates to Vista functioning?
    "Navigate to the program file for the extension manager and
    select properties. On the compatibility tab select the option to
    run as administrator, click on the all users options and select run
    as administrator for all users if desired and then apply. Of course
    the option is only available if you have the UAC turned on.
    Now, re-install the extensions and you should have no
    problems. You'll just have to deal with the UAC everytime you use
    the extension manager."
    Does it solve the extensions installation issue?
    quote:
    Originally posted by:
    Bopjo
    quote:
    Try resetting your Preferences file.
    Nope, same problem. I have encountered a new problem as well.
    When trying to install extentions from the FW exchange I get error
    messages in the extention manager like:
    "Can't create folder...[/path/]"

  • Could not render the database. Not enough memory.

    This seems to be a big bug in Fireworks CS4. I am building a 10 page website. I only had the opportunity to insert about 10 high quality images into the project, and then tried saving the project as a Fireworks PNG. It appeared to Save successfully, however from that point on, any object I would click on, any layer I would select a message would appear.
    "Could not render the database. Not enough memory."
    Has anyone seen this before? How can I fix this?
    I tried doing a workaround. I tried opening the saved file from Fireworks CS3. Before opening, it displays a message about insufficient permission in the registry. I click OK, and it opens in CS3. I can finally edit the project and make changes, and save it without problems. However, even after saving in CS3, I cannot open it in CS4 without getting the error message. It is not only on my machine. I send my project to others to see if they can open it via CS4, and they can't either. They get the same message.
    I attached the PNG file, this is for a school project.
    Any help is most appreciated.

    I'm relieved to hear that. So I trust that your images are all nice and small, file-size-wise.
    Okay! I trust you have already defragged your hard drive and turned off all those nasty TSRs that eat up your RAM. Fileswapping is usually what slows my computer down.
    Check for scripts that might be running wild in the background. Can't think what they might be, but if something is looping and shouldn't be, you'll end up with less free RAM to move around in.
    I haven't noticed the problem with lots of layers, but I haven't been watching, either. Have you experimented with turning off the layers that you are not actually exporting? I understand the  convenience in keeping all those layers in there...it's a big timesaver in editing throughout a project. If all the layers are not needed in the image export, however, turn them off temporarily. That might save some elbow room.
    It sounds as if your system fits the basics, but you might check:
    Windows
    1GHz or faster processor
    Microsoft® Windows® XP with Service Pack 2 (Service Pack 3 recommended) or Windows Vista® Home Premium, Business, Ultimate, or Enterprise with Service Pack 1 (certified for 32-bit Windows XP and Windows Vista)
    512MB of RAM (1GB recommended)
    1GB of available hard-disk space for installation; additional free space required during installation (cannot install on flash-based storage devices)
    1,024x768 display (1,280x800 recommended) with 16-bit video card
    DVD-ROM drive
    Broadband Internet connection required for online services*
    Mac OS
    PowerPC® G5 or multicore Intel® processor
    Mac OS X v10.4.11–10.5.4
    512MB of RAM (1GB recommended)
    1GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on flash-based storage devices)
    1,024x768 display (1,280x800 recommended) with 16-bit video card
    DVD-ROM drive
    Broadband Internet connection required for online services*
    Rather than jumping to think it's a bug, try a test with 9 layers, or 8 layers. If only 10 layers and up provide problems, file a bug/feature report or contact someone in support.
    As this is a user forum, we (other users) neither speak for Adobe nor know everything about the applications from a support viewpoint, so while we're always willing to offer opinions and frequently solutions, real bugs are not in our bailiwick.
    Perhaps someone with a multi-layer difficulty can chime in here.
    Beth

  • Osdm error 'could not create the Java virtual machine.'

    Running on Windows XP. SQL Developer reports Java(TM) Platform=1.5.0_06
    I downloaded and unzipped the osdm early adopter release,but when I double click on the osdm.exe, I get a dialog box titled"Java Virtual Machine Launcher" with the error:
    could not create the Java virtual machine.
    I'm don't know where to begin to troubleshoot this problem.
    Is there a log,trace,error file somewhere?
    Do I need something specific in my path or an environment variable set?

    Thanks Jim, for helping and the support. I'll respond to a few things in this thread for the rest of the forum.
    Feedback
    Let's start with the feedback and support. As Rene said, he is working at answering all queries coming into the feedback application. This means reviewing the issues, working with the developers and logging bugs. Each comment and query in that application is addressed and users can go back in an review the feedback for their own comments in the application too. We have had considerable interest and downloads, about which we are very excited, and this means there are lots of queries. Rene is addressing all these, and as I type, there are no comments in that application that have not been addressed. Not all are closed, as there are some outstanding issues, but each user who has submitted a comment shold have received at least one email.
    The Team
    I'm reluctant to comment about which part of the product is built in which country, but will say that SQL Developer has been a small team, with the greater percentage of developers living outside the US from the outset. I love working in the team including the wide diversity of locales and cultures and also think that because we live across multiple time zones, we can help users most times of the day or night. We are very privileged to have had the modeling team join us and I'm sure you'll get to know them in time too. If you are interested, the team stretches across a few states in the US, Ireland, Northern Ireland,England, Belgium, Bulgaria, India and China!
    Now to the problem. - Java virtual machine
    1. There is a choice of download, either with the JDK or without. If you download the build with the JDK, there should be no problem, as the product knows where to find the jdk. I'm not sure I see which of these 2 downloads was used. So that would be useful information to have.
    2. If you use the build without the JDK, then Data Modeling looking for the detail in your path.(Unlike in SQL Developer where we prompt you) You can test to see what is in your path by starting a command line, or command prompt and typing java -version. This will tell you what version of java is being looked for and used by Data Modeling.
    If you do not have a JDK, then you can download and install that as described on the download page.
    Troubleshooting
    We want to release SQL Developer Data Modeling as a standalone tool (i.e. what you are testing today) or underpinned by a repository. So our main goal is to ensure that we have a solid stable and usable product for production. The plan is to follow production with a much tighter integration to the underlying SQL Developer framework.
    Regards
    Sue

  • FW CS3 Could not render the database

    Hi all.
    Anyone come across this one? I keep getting an error message
    in FW CS3.
    "Could not render the database, Not enough memory".
    Now, when this started I had a number of apps running so I
    closed them all down except for FW and the problem remained. So,
    next I re-booted and have only FW CS3 running and when I open up
    the .png file to edit it I still get this error. I have never seen
    this with FW 8 however I have run into similar problems when
    running PS CS3/Bridge.
    My system is a P4 duo core jigger with 2GB RAM and plenty of
    spare space on the HDDs. I have my Paging file set to a min of 3GB
    and a max of 4GB across two partitions.
    Thanks.

    WollombiWombat wrote:
    > Update to above. The image concerned has a Selective JPG
    Mask on it. I wanted
    > to edit some text that is outside the mask and thats
    when I get this error
    > which prevents me from doing anything with FW. I am
    forced to kill it with the
    > Windows Task Manager.
    > Sounds like a Bug.....
    >
    I have had this with FW8 - it turned out it was a faulty font
    - try the
    same image with a different font and see if that works.
    HTH
    chin chin
    Sinclair

  • Photoshop CS6 error : Could not complete the video flames  to layers command because Dynamiclink is not available

    i can´t import videos and mp3  photoshop cs6 error : Could not complete the video flames  to layers command because Dynamiclink is not available .... what it means? who can i fix it?

    Unfortunatly, the 32 bit versions of windows doesn't support video in photoshop cc.
    see this post:
    http://forums.adobe.com/message/5802978#5802978

  • Am not able to use facebook on my Iphone 4, softwareversion:iOS7.1, also tried to access through safari and chrome that i have installed it gives an error message saying: "safari could not open the page because server stopped responding",

    Am not able to use facebook on my Iphone 4, softwareversion:iOS7.1, also tried to access through safari and chrome that i have installed it gives an error message saying: "safari could not open the page because server stopped responding", i tried network reset, reset the whole device, rebooting , changing airplane mode rebooting nothing fix the issue, but i can access other sites and google , am using Vodafone as my carrier with 2g network, when at home able to access facebook.com through wifi in safari requesting assistance thank you

    If you can access Facebook while on Wifi at home, but you are unable to access it while away running on your carrier's 2G network, I could phone your carrier.  You have already completed the Cellular Data troubleshooting for the iPhone, so any limitations keeping your from connecting to Facebook over cellular will have to be answered by your carrier.

  • Photoshop cs6 error "could not use the type tool because the target channel is hidden.  happens when im typing in photoshop, go to another layer and then come back. can't alter text at that point

    photoshop cs6 error "could not use the type tool because the target channel is hidden.  happens when im typing in photoshop, go to another layer and then come back. can't alter text at that point.  i really need to get thsi figured out. thank you.

    You may have answered my question. I AM using the 64bit version of Illustrator CS6. I had no idea there were bugs in it that affected paths copied and pasted from Illustrator to Photoshop.
    A bit more about what I'm trying to accomplish... I'm trying to follow Deke's tutorial (http://www.deke.com/content/dekes-techniques-018-creating-a-3d-pie-chart) which is already difficult since so much has changed between CS5.5 and 6, but then on top of that, I keep getting errors!
    So I created the pie chart exactly as he shows and copied and pasted into Photoshop exactly as he does. Before submitting this post, though, I tried drawing just two very simple triangle shapes, copying them both and pasting them into Photoshop as a shape layer. The shapes weren't overlapping, but they were a part of the same shape layer just like the pie chart tutorial.
    Thanks for your help. If there is anything else I should try before just giving up because of the 64bit bugs, please let me know.

  • Getting error could not place the document because there is not enough memory RAM wile importing .png file into Photoshop cc

    getting error could not place the document because there is not enough memory RAM wile importing .png file into Photoshop cc

    Without knowing anything about your system, your image file, your working document and so on nobody can even begin to guess. The file could be damaged, there could be color management issues at play and what have you...
    Mylenium

  • Logon Error:Could not retrieve the source file for Port "Main"

    Hi All,
    We have a port which is blocked due to structural exceptions.When i try to connect to the Exceptions folder
    "Main[Exceptions]" the import manager throws an error "Logon Error:Could not retrieve the source file for port "Main".
    Any help greatly appreciated

    Hi ,
    Thanks for your reply.
    This is what I see in the log file in the exceptions folder
    These are the line I see almost to the end of the log file before they complete field mappings,value addings
              <Failure ts="2008/07/22 00:10:48.326 GMT" tid="1286" entry-no="9114" operation="Create lookups" rc="0x80000001">Illegal value for parameter</Failure>
              <Timer ts="2008/07/22 00:10:48.327 GMT" tid="1286" entry-no="9115" name="Import Lookup" total="0.040819">1</Timer>
              <Trace ts="2008/07/22 00:10:48.327 GMT" tid="1286" entry-no="9116">Import of Lookup Failed.</Trace>
    But when I open the same source xml file after downloading to my local folder from Exceptions Structural folder and load manually using IM i get the status as "Ready to import".
    Any Help greatly appreciated

  • Error - Could not complete the music store request, the store may be busy .

    I get the error "Could not complete the music store request, the store may be busy, check your internet connection or try again later." I have uninstalled and reinstalled,Tried on and off with the firewall, tossed the prefs, tried older and latest versions. It used to work but it hasn't worked in the last few days.
      Windows XP Pro  

    I found the problem to the iTunes Music Store connectivity. When iTunes version 6 is installed, it places a configuration / preferences file in the following location:
    "C:\Documents and Settings\<user>\Application Data\Apple Computer\iTunes\iTunes.pref"
    This file contains several very large keys:
    Preferences:129= (41,826 characters in length)
    Music Store= (1,722 Characters in length)
    Somewhere in these keys is stored are references to userid's, connections or other TCP/IP / internet connectivity objects that are being used when iTunes is installed. By deleting this file, these old setting appear to be cleared out.
    In my case, one or more of the keys in this file appear to have been storing a property from my old dial-up ISP connection that was no longer valid for my new, Comcast cable modem connection.
    Once I deleted this file, and re-started iTunes, it was as if I had never run the software before. I bypassed the option for searching for and importing .mp4's from My Music, and Itunes opened correctly, with full access to the music store. My library and playlists were intact and all is well.
    Apple should re-write the protion of iTunes codes that stores anything pertaning to an internet connection that may change over time. Alternatively, iTunes should either A) Prompt for this information B) Enable user access to this parameter in a settings dialog C) Access this information dynamically at runtime.
    Paul

  • Error: "Could not complete the requested operation" when you start Illustrator CS2 (Windows XP)

    Hi everybody i'm nick from KL Malaysia, i having a problem with my Illustrator CS2 problem can't solved it, someone can help me?
    My problem is when i open lllustrator after load finish the file thn will come out Error: "Could not complete the requested operation", i dunno y?
    Have someone same problem with me anot? got any stion to solved it?

    Nick,
    The first thing to try is to
    a) Ctrl/Cmd+Alt/Option+Shift during startup,
    or (if a) does not work)
    b) Move the folder
    a) is easy but irreversible, b) is more thorough and reversible, so if you like your settings and do not want to destroy them in vain, use b).

  • Error: Could not find the file "flash.ocx"

    I have been receiving the error COULD NOT FIND THE FILE
    "FLASH.OCX" for the past couple of months - I have been watching
    the message boards and have seen a lot of "fixes" and beta's come
    up errors (not sure that it's this exact error though).
    I get this error continuously throughout the day - no matter
    if I have nothing running on my computer or I have 10 things open.
    This morning it occurred to me that my screen saver is not coming
    on and it seems to me that the above errror is popping up everytime
    my screen saver should start. I HAVE TIMED THIS TODAY AND CHANGED
    HOW LONG BEFORE MY SCREEN SAVER STARTS - AND IT IS DEFINITELY
    GETTING THE ERROR EVERYTIME THE SCREEN SAVER IS TRYING TO START.
    Last week, I deleted the version of Flash that I had and then
    re-installed; still getting the error.
    I was getting the error when I had IE6 so I thought maybe
    switching to IE7 would correct it - but it didn't (that was a few
    weeks ago).
    My computer does not freeze up but it is SOOO annoying to
    continually throughout the day get this error.
    IE7.0
    ADOBE 9,0,28,0
    WINDOWS XP - SP2
    PLEASE HELP!

    Ah-ah! The workaround is to map my network folder to a drive, say... M:\
    So, when I select Edit->Edit in Audition->Sequence, I can select the Browse button to alter the Path destination. Instead of seeing '\\Zeus\Projects\...', I select the mapped M: drive so the path reads 'M:\Projects\...' instead.
    Then, Audition loads and is able to find the sequence or clip.
    So... that solves my problem!

Maybe you are looking for

  • Database connection not working in Crystal Reports for Eclipse 2.0

    Hello All, We have several hunderd reports that were created in CR 8.5.  We are moving to a new Java  environemnt and we are also considering using BIRT.However to save development time and effort we are considering using the CR for Eclipse 2.0. For

  • I can't sync my music to my iphone 4..

    Im currently using the itunes software version 5.0.1...  I have no idea why i can't synchronize my music to my iphone and the minute they said it's "synchronized" , i check my iphone music and the songs were not selectable.. and i can't play any musi

  • HT5552 I am not able to use my itunes gift card after inputting card

    How can I use my iTunes giftcard after been entered in iTunes and shows the amount

  • Recovery Disc & new ProBook 4530s

    How do I create a recovery disc for a new ProBook 4530s with Windows 7?  I can't find Recovery Manager software on the pc and the pc didn't ask me if I wanted to create a recovery disc.

  • 5761 Trigger Leads Analog CH 0 by 10.16 usec

    Hi LV Developers, I am having a bit of a headache here working with my FlexRIO.  I have a 5761 AC Coupled Digitizer connected to a 7954r FPGA.  All of this is mounted on a PXI Chassis 1031DC and I am running the system remotely through Ethernet.  I a