Crystal Reports 2008 database error

I want to make a change to an already existing Crystal Report.  The database table(s) were specified with the "add Command" command and so the report uses an SQL command to access the tables. (An ODBC connection is used to access tables.)  When I go to the database expert and edit the "Command", make a change (or no change for that matter) and click save, I get the following error message: 
Invalid Argument Provided.
Details: The alias requested 'Command', contains a combination of characters which is not considered to be valid.
I know a similar error occurred in an earlier version of Crystal, but please note I am using Crystal Reports 2008.  Has anyone else experienced this issue?  Does anyone know a fix or workaround?
Thanks,
Larry
Here is one of the SQLs that I am talking about:
SELECT T.BatchNum, T.InstNum, T.SiteNumber, T.RecDate, T.RecTime, T.Dept, T.VoidStatus, T.BookCode, T.BookNum, T.BPageNum, Concat(T.BookCode, ' ', T.BookNum, ' ', T.BPageNum) as 'Cd Bk Pg', T.InstCode, T.InstDescIndexing, T.TotalPages, T.Operator, A.Code
FROM TBL_Transactions T
left outer join TBL_ARtrans A on A.BatchNum = T.BatchNum
where T.BatchNum = {?Com_BatchNum}

Larry, I'd recommend posting this query to the Crystal Reports Design forum:
SAP Crystal Reports
That forum is monitored by qualified technicians and you will get a faster response there.
Thank you for your understanding,
Ludek

Similar Messages

  • Crystal Reports 2008-Vista-ERROR-crw32.exe Entry Point Not Found in dll

    Hi Experts,
    I just installed the Crystal Reports 2008 (with SP0) on my Vista (Home) machine.  When I try to start the CR 2008, I am getting the below error message:
    Error Title: crw32.exe - Entry Point Not Found
    Error Message: The procedure entry point ?PrintLegend@CMapXLegend@CSLib300@@QAEXJJJJJ@Z could not be located in the dynamic link library cslibu-3-0.dll
    Here are the things I tried to resolve the above problem:
    1) Uninstall and Reinstall the CR 2008.  -  No change.
    2) I configured the DEP to accept Crystal Reports (Performance - Advanced - DEP allow). 
    None of these seem fix the problem. 
    Can you please help me kick start the Crystal Reports 2008? 
    Thanks,
    Arun

    Please try with this:
    Run a command prompt as administrator. From the start menu, select "All Programs", then "Accessories" and right-click on the "Command Prompt" shortcut and choose "Run As Administrator". From here you can use the following command to disable Data Execution Prevention (DEP) with the following command:
    bcdedit.exe /set nx AlwaysOff
    Keeping your command prompt open, run your setup or other process being stopped by DEP. Then, to turn it back on again, do the same and run the following:
    bcdedit.exe /set nx AlwaysOn
    Regards,
    Shweta

  • Crystal Reports 2008 runtime error while running on Windows Server X64

    I have a .NET web application compiled as X86 in Visual Studio 2008 invoking Crystal Reports 2008 SP2 that's running fine at a number of sites running Windows Server 2003 X86.</br>
    </br>
    When deploying this app to Windows Server 2008 X64 I get the error message below. </br>
    </br>
    I'm aware that there is an unanswered question similar to this already in the forum but my application is compiled for X86 and I've tryed installing a variety of run times including "crruntime_12_2_mlb.msi" and "crredist2008_x86.msi".</br>
    </br>
    What combination of compile and run time is needed to get around this issue?</br>
    </br>
    Thanks.</br>
    </br>
    </br>
    ERROR MESSAGE **.</br>
    </br>
    An error has occurred while attempting to load the Crystal Reports run time..</br>
    </br>
    Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly..</br>
    </br>
    Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) that contains the version of the Crystal Reports runtime (x86, x64, or Itanium)  that is required.  Please go to http://www.businessobjects.com/support for more information.
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. .</br>
    </br>
    Exception Details: CrystalDecisions.CrystalReports.Engine.LoadSaveReportException: An error has occurred while attempting to load the Crystal Reports runtime..</br>
    </br>
    Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly..</br>
    </br>
    Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) that contains the version of the Crystal Reports runtime (x86, x64, or Itanium)  that is required.  Please go to http://www.businessobjects.com/support for more information..</br>
    </br>
    Source Error: .</br>
    </br>
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.  .</br>
    </br>
    Stack Trace: .</br>
    </br>
    [LoadSaveReportException: An error has occurred while attempting to load the Crystal Reports runtime..</br>
    </br>
    Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly..</br>
    </br>
    Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) that contains the version of the Crystal Reports runtime (x86, x64, or Itanium)  that is required.  Please go to http://www.businessobjects.com/support for more information.]
       CrystalDecisions.CrystalReports.Engine.ReportDocument.CheckForCrystalReportsRuntime() +399.</br>
       CrystalDecisions.CrystalReports.Engine.ReportDocument..cctor() +218.</br>
    </br>
    [TypeInitializationException: The type initializer for 'CrystalDecisions.CrystalReports.Engine.ReportDocument' threw an exception.].</br>
       CrystalDecisions.CrystalReports.Engine.ReportDocument..ctor() +0.</br>
       ChartsEnterprise.UI.GenReport.CreateReport(String reportname) +42.</br>
       System.EventHandler.Invoke(Object sender, EventArgs e) +0.</br>
       System.Web.UI.Control.OnLoad(EventArgs e) +132.</br>
       System.Web.UI.Control.LoadRecursive() +66.</br>
       System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean .</br>includeStagesAfterAsyncPoint) +2428.</br>
    Edited by: PSernz on Mar 25, 2010 3:58 AM

    What combination of compile and run time is needed to get around this issue?
    See [this|https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=56787567] wiki. I think I may not have that wiki updated up to FP2.5, so the FP2.5 msm is here:
    https://smpdl.sap-ag.de/~sapidp/012002523100002975182010E/cr2008fp25_mm.zip
    msi is here:
    https://smpdl.sap-ag.de/~sapidp/012002523100002975312010E/cr2008fp25_redist.zip
    Check the version of the CR assemblies referenced in your project. The use the wiki above to deploy the correct runtime.
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup

  • Crystal Reports 2008 Setup Error

    I've tried installing Crystal Reports 2008 on a Windows XP SP 3 machine and setup keeps failing. Any help would be greatly appreciated.

    Posting Any error message would help also.
    Likely you are missing dependencies. Make sure the 1.1 and 2.0 .NET Framework are installed and up to date and that you are installing with FULL local PC administrator rights.
    Download Service Pack 1 and they try again by right clicking on the setup.exe and selecting Run as Administrator.
    Thank you
    Don

  • Crystal Reports 2008 Server Error when viewing report

    Hello All,
       I have loaded a CR 2008 report onto the CR 2008 Server. When I view the report from InfoView or CMC, I get the following error message:
    Error in File <report name>: Unknown Database Connector Error .
    I setup the ODBC datasources on the server as they are on my client PC where the Report originally worked. Are the ODBC datasource connections supposed to copy over with the report? Or do I have to manually enter them into the "Database Configuration" section?
    Thank you in advance.

    1212487 - Error: "CRAXDRT Error Occured on Server. Error Number:-2147221005"
    Symptom
    A report is called through the Active Server Pages (ASP) Report Server to be displayed in the Report Viewer for ActiveX. However, the report is displayed with blank pages and when the viewer is switched to the Report Viewer for HTML the following error is displayed:
    "CRAXDRT Error Occurred on Server. Error Number:-2147221005 Error Description: 006ASP 0177 Server.CreateObject Failed~Invalid Class String"
    The same ASP application returns the report correctly when it is called from a client computer with the full version of Crystal Report 8 Developer Edition installed.
    Resolution
    It was found that the file, Emfgen.dll, was not installed and registered on the web server computer during the installation of the Crystal Reports ASP Reports Server. The report could be displayed correctly on the client computer, without Crystal Reports Developer Edition installed, after this file had been installed on the web server computer.
    For more information on installing the Crystal Reports web components please search for and download Scr8_WebManualInstall.zip from our website at:

  • Crystal Reports 2008 Installation Error

    Hi,
    I have bought CR 2008 from third-party vendor online. I am trying to install it on my Laptop (Windows XP SP3).
    It asks for Language (selected English). Then after accepting License Agreement and entering Product KeyCode, Typical Installation option is selected.
    System then checks for disk space requirements and after that it starts installing the CrystalReports. After few minutes the installation is hanged.
    On screen I see that at the time of freezing it was registering modules like shortcut.dll or pdf.dll or LicenseKey.dll etc..Everytime I try to install it is different dll when installtion is stopped. I have waited for couple of hours hoping that installtion will be complete but it never finishes.
    I have tried so many times but every time it freezes when it tries to register some dll.
    I have then downloaded trial version from the Web and tried to install from there, but again I'm getting the same result.
    Any help in resolving this issue is very much appreciated.
    Thanks

    Hi
    I assume you are trying to install the CR Designer 2008 V0 package. Unfortunately this is not compatible with Windows XP SP3. Talk to the online vendor and request the CR Designer 2008 V1 package (you can use the same poduct code to activate it).
    Regards,
    Stratos

  • Runtime Error  loading Crystal Reports 2008

    Hi there
    I have recently purchased online in the sap site the bundled product that includes SAP Crystal Reports and SAP Crystal Dashboard Design on the sap website. For those I received only one key code
    I downloaded both products and manage to installed and load SAP Crystal Dashboard Design. I have installed SAP Crystal Reports (CR2008LPs_02142011.exe) everything goes well. When I start the program it loads for a second and then I get the following error:
    u201C Runtime Error!
    Program: c:\Program Files\Businessu2026
    This application has requested the Runtime to terminate it in an unusual way.
    Please contact the application support team for more information.u201D
    My OS is Windows 7 Enterprise 32-bit
    I have tried the following:
    u2022     Uninstalling and reinstalling again
    u2022     Downloading the file again from the sap site in case the file was corrupted
    u2022     I have uninstalled CR and download the SAP Crystal Reports trial version from SAP site
    u2022     Trying to navigate to the registry to clear the registry for recent files (as I have seen in this thread Crystal Reports 2008 Runtime Error) . I get the following error message when I click on u201CHKEY_CURRENT_USER/Software/Business Objects/Suite 12.0/Crystal Reports/Recent Filesu201D. Error:
    "Error opening Hey:
    Crystal Reports cannot be opened
    An error is preventing this key from being opened
    Details: Access is denied"
    I have been unsuccessful with all the above.
    I would appreciate if someone could help.
    Thanks in advance and regards,
    Santiago

    Hi Santiago,
    That error suggests you are not a local PC administrator. CR installs require you use an account that can update registry keys etc.
    Talk to your IT guys to give you full access to your PC or log on as the local PC Administrator and install it again.
    Thank you
    Don

  • Crystal Reports 2008 can't access R/3 queries

    Hi there,
    My company is in the middle of SAP implementation and our go-live is in 2 months. We don't have a BW system in place and are (for the most part) using the Standard SAP Reports available out of the box to facilitate the requirements of the different business users. But as we all know, there are always some reports that require customization. So, for that we decided to use Crystal Report 2008 (ver. 12.3.0.601) to design custom reports while accessing data from the Standard SAP Tables. I am able to access the Standard SAP Tables in R/3 (built on Oracle database) and the fields in those tables from the Crystal Report 2008 Database Expert option and have created an A/R Aging Report successfully. However, while working on my second report (GL Journal Entry By Invoice#) I am struggling to maintain and improve the query execution time since I am accessing data from huge standard FI-CO tables (BSEG, BSID, BSAD). Our 3rd party implementation team has already designed a custom report in R/3 that is available in all the clients using the T-Code in NetWeaver for the end users but it's missing some fields that the end users would need for go-live and it's not possible to ask the 3rd party implementation team to make the needed changes to the already customized report (for whatever reasons). And, that's why, I am asked to customize this report in Crystal. I suspect the execution time is so bad in Crystal because of lack of filtering of the data when I am pointing at the huge Standard Tables. I would have added some SQL clause and filters to bring in only the required fields from the table into the Crystal environment but I don't have that option since the R/3 system is sitting on Oracle. I have couple questions:
    1) Would it be advantageous to build the custom Crystal Report on top the custom R/3 report that is already in place since in the R/3 report I can create a default variant with the conditions I want and it gets executed every time I call it in Crystal giving me only the data I am interested in? And, is it even possible?
    2)  Why am I not able to see the R/3 custom report from the Database Expert option even though the report is accessible from NetWeaver? I am able to access all the Standard SAP Tables from Database Expert in Crystal 2008.
    And I forgot to add, we don't have an ABAP expert in house to create ABAP function modules that might help me filter the data in the R/3 system.
    Is there any suggestions that will get the job done? Am I doing anything wrong here?
    Sorry for the long story but I wanted to give you guys a full background of the issue.
    Any help will be greatly appreciated.
    -RBora

    RohitBora wrote:
    Hi there,
    > My company is in the middle of SAP implementation and our go-live is in 2 months. We don't have a BW system in place and are (for the most part) using the Standard SAP Reports available out of the box to facilitate the requirements of the different business users. But as we all know, there are always some reports that require customization. So, for that we decided to use Crystal Report 2008 (ver. 12.3.0.601) to design custom reports while accessing data from the Standard SAP Tables. I am able to access the Standard SAP Tables in R/3 (built on Oracle database) and the fields in those tables from the Crystal Report 2008 Database Expert option and have created an A/R Aging Report successfully. However, while working on my second report (GL Journal Entry By Invoice#) I am struggling to maintain and improve the query execution time since I am accessing data from huge standard FI-CO tables (BSEG, BSID, BSAD). Our 3rd party implementation team has already designed a custom report in R/3 that is available in all the clients using the T-Code in NetWeaver for the end users but it's missing some fields that the end users would need for go-live and it's not possible to ask the 3rd party implementation team to make the needed changes to the already customized report (for whatever reasons). And, that's why, I am asked to customize this report in Crystal. I suspect the execution time is so bad in Crystal because of lack of filtering of the data when I am pointing at the huge Standard Tables. I would have added some SQL clause and filters to bring in only the required fields from the table into the Crystal environment but I don't have that option since the R/3 system is sitting on Oracle. I have couple questions:
    >
    > 1) Would it be advantageous to build the custom Crystal Report on top the custom R/3 report that is already in place since in the R/3 report I can create a default variant with the conditions I want and it gets executed every time I call it in Crystal giving me only the data I am interested in? And, is it even possible?
    No - this is not possible; you can only report in Crystal against ECC tables, ABAP functions, and SAP Query/Infosets
    > 2)  Why am I not able to see the R/3 custom report from the Database Expert option even though the report is accessible from NetWeaver? I am able to access all the Standard SAP Tables from Database Expert in Crystal 2008.
    ABAP Reports are not a datasource in Crystal
    >
    > And I forgot to add, we don't have an ABAP expert in house to create ABAP function modules that might help me filter the data in the R/3 system.
    > Is there any suggestions that will get the job done? Am I doing anything wrong here?
    > Sorry for the long story but I wanted to give you guys a full background of the issue.
    >
    > Any help will be greatly appreciated.
    >
    > -RBora
    Hello,
    Those are some big tables to be reporting against in Crystal
    Have you considered creating an InfoSet using logical database BRM (Financial Documents) that could then be used to report against Crystal?
    We do use Crystal / SAP Query against the logical database BRM as an InfoSet and so far we haven't seen the performance issues you are describing.
    Also, have you considered upgrading to Crystal Reports 2011?  Not sure that it would help the performance issues you are describing.
    Regards,
    Tammy

  • Crystal Reports 2008 installation fails

    I recently re-installed Windows XP SP3 on my laptop and need to re-install Crystal Reports 2008.
    I place the installation CD into the drive and the Auto-run application starts up and asks for the language to install.
    I select English and click on the Install button.
    After about 10 seconds I get a very cryptic error message.
    Crystal Reports 2008 Setup Error
    Crystal Reports Setup 2008 has failed.
    If the problem persists, please contact Business Objects Product Support.
    Any help in this matter would be greatly appreciated.
    Edited by: Truper on Feb 9, 2010 1:58 PM

    It's likely a dependency issue. Make sure the .NET frame 1.1 and 2.0 are installed. GO to Microsofts site or possibly they are an option in the update page.
    Thank you
    Don

  • Crystal Reports 2008 Setup Has Failed

    Post Author: MWheeler
    CA Forum: Upgrading and Licensing
    I get a setup error as soon as I hit "install" on the English upgrade to 2008 on my Windows Xp Sp2 machine.  I am running XI developer edition on this machine.  The Window title for the error message is "Crystal Reports 2008 Setup Error" and the text is "Crystal Reports 2008 Setup has failed.  If this continues contact http:
    support.businessobjects.com".  I tried to open a Support case on this, but the Create a Case screen didn't have anyplace to enter any data at all and ended up just timing out. 

    I have got the same error message.
    I was unable to uninstall the program from the control panel.
    Try to install Windows Installer CleanUp software, and uninstall with this program the previous version on Crystal Reports.
    http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  • *Crystal Reports 2008 connection to oracle 11g database error IM003*

    Hi ,
    I am getting the following error when connecting to Oracle 11 g database using Crystal Reports 2008.
    _Logon Failed:Details: IM003:Specified driver could not be loaded due to system error 127 ( Oracle in OraClient11g).
    Datebase Vendor Code:160.
    The Login and Pw that I am using are correct.
    *Could you please let me know any steps that i need to do to resolve this problem.
    Thanks!*

    Hello,
    I haven't seen that error in years... There was a version of Oracles client that did not put the client install into the PATH statement.
    Add the Oracle ...\Bin folder to your System Environment variables and then it should work.
    Thank you
    Don

  • Unknown Database connector Error - Crystal Reports 2008 and OLE DB

    Hi,
    I want to create a report based on OLE DB provider.
    Once I Select it from the Database Expert list I get this Error: "Unknown Database Connector Error", and the list is empty.
    I am using Crystal Reports 2008 on Win XP SP2.
    SQL Server 2005 is installed on the local machine.
    If I create a UDL File and double click, I can see all OLE DB Providers on the machine.
    What am I missing ?
    Thanks,
    Yuval.

    Hi Friends,
    Thank you all for trying to help.
    - The installed MDAC version is 2.8 (It comes with XP SP2). I have tried installing it again and it says that it is already installed.
    - I am not using a bussiness view. Just the simplest blank report in CR2008. I am not able to start it using OLE DB, once I want to choose a provider - I get the error, before even entering connection details such as username and password.
    - I am able to build an ODBC report, but when trying to view it using Crystal Reports Windows Form Viewer (from within a .Net application) I get an error: "Failed to Open The Connection". It happens also with reports built on other machines using OLE DB.
    Same report works fine with the same application on different machines and I cannot figure out what is the difference.
    I think Something on my machine is not right.
    Any suggestions ?
    Thanks,
    Yuval.

  • Crystal reports 2008 sp3 : An error has occurred while attempting to load t

    Hello,
    Please forgive me for posting in the CR .NET forum because we are using the full Crystal Reports 2008 product and I did not see a category for it.  If there is a better forum for this question, please let me know or feel free to move it.
    We are having trouble deploying our crystal reports 2008 reports to a Windows Server 2008 R2 server in an aspx application...
    I have been working on this issue for 4-days and cannot seem to make any progress, so I would really appreciate your help.
    Our Environment:
    Development Computer (32-bit, WinXP)
      VS2008 (fully updated, was not installed with its Crystal Reports feature)
      Crystal Reports 2008 SP3 (downloaded and installed "cr2008_sp3_fullbuild")
    Database Server (64-bit)
      "SERVER2" is a Microsoft SQL Server 2008 server, fully updated
    Web Server (64-bit)
      "SERVER3" is a Microsoft Server 2008 R2 Web server.
    We have an application that is installed on the Web server and it pulls data from the database server.
    The webpages are accessing the database properly.  There is a ShowReport.aspx webpage that has the
    CrystalReportsViewer on it.  We send parameters and logon information to ShowReport.aspx.  ShowReport
    works properly on our development computer and the report looks good, but it fails on the web server.
    We downloaded CRRuntime_12_3_mlb.msi (X86) from SAP/CR and installed it on the web server without any issues.
    Our application pool on the web server for this application is set to 32-bit mode.  When I launch the
    application, it works properly with the database and displays data on web pages, but when I try to
    view a report on ShowReport, I get the following error message:
    An error has occurred while attempting to load the Crystal Reports runtime.
    Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly.
    Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) that contains the version of the Crystal Reports runtime (x86, x64, or Itanium)  that is required.
    According to everything that I have read, I have properly matched the DLLs: On the development computer, "cr2008_sp3_fullbuild" was installed; On
    the web server, "CRRuntime_12_3_mlb.msi (X86)" was installed.  They are both Crystal Reports 2008 and not .NET.  CR.NET was not installed on our development computer, so our application was built with full Crystal Reports 2008 SP3.  On our development computer, .ENGINE is 12.0.2000.0 and
    the same version is on the web server.
    So, I am completely at a loss as to why we are encountering this error.  Help, Please!!!
    Thank you in advance,
    Mike

    Hi Mike,
    Did you set your project for X86 mode only? If not do so and rebuild and deploy your app.
    Thank you
    Don

  • Crystal Report 2008 results "Password did not match error" in SQL Server Log

    Hi,
    I am trying to develop some crystal reports using Crystal Report 2008 SP4 to connect to SQL server 2008 through RDO (ODBC). My problem is that anytime Crystal Report is trying to establish a connection with SQL Server, first it tries to connect with the wrong password and results the following error message in SQL Server log:
    Login failed for user 'peyman'. Reason: Password did not match that for the login provided. [CLIENT: 192.168.2.198]
    The login name 'peyman' is the right one as I have quoted the same in setting up ODBC System DSN using "SQL Server Native Client 10". But somehow Crystal Report is taking its chance and trying to connect before prompting me for the password. After this error logged to SQL server side, I can see Crystal Report pops up the prompt to enter DSN password. After supplying password to this prompt, Crystal Report works fine and pulls the data and renders the report without having any more incorrect password error logged to SQL Server.
    The attached file shows the step I am taking to regenerate the issue. I need this to be fixed as anytime uses any of these reports and tries to render it with crystal runtime engine the same error message raises in SQL Server side and logged in the log file.
    Thanks,

    Hi Peyman,
    This is the way it should work, In CR designer when you open the report it does nothing. As soon as you hit the Refresh button then CR tries to use the connection saved with the report. It assumes what is saved with the report is a valid server and connection info. CR simply tries to verify the server is still active.
    If you don't want it to fail in CRD then before opening any report Click the File, Log on Database option and connect. Now when refreshing reports it won't log the failed.
    In the SDK it does the same thing, it assumes the Server info is the same and does try to connect to verify the Server does exist. It only takes a few milli-seconds to do this
    To stop this from happening set the log on info first then it won't log the attempt to connect, it's checking to see if Trusted is allowed.
    TIMESTAMP    THREAD_ID    FILENAME    LINE_NUMBER    LOGGED_DATA    LEVEL
    2014-6-2 8:30:11.439    57320    .\QESession.cpp    444    Set Product View Locale: 4105    20
    2014-6-2 8:30:11.439    57320    .\QESession.cpp    478    Set Preferred View Locale: 4105    20
    2014-6-2 8:30:11.439    57320    .\QESession.cpp    500    Set Process Locale: 4105    20
    2014-6-2 8:30:11.440    57320    .\qecommon.cpp    117    This property is currently in a read-only state and cannot be modified. File Name: ".\QEProperty.cpp". Line: 217    1
    2014-6-2 8:30:11.967    57208    .\QESession.cpp    444    Set Product View Locale: 4105    20
    2014-6-2 8:30:11.967    57208    .\QESession.cpp    478    Set Preferred View Locale: 4105    20
    2014-6-2 8:30:11.967    57208    .\QESession.cpp    500    Set Process Locale: 4105    20
    2014-6-2 8:30:11.968    57208    .\qecommon.cpp    117    This property is currently in a read-only state and cannot be modified. File Name: ".\QEProperty.cpp". Line: 217    1
    2014-6-2 8:30:11.999    57208    .\QESession.cpp    444    Set Product View Locale: 1033    20
    2014-6-2 8:30:12.4    57320    .\qecommon.cpp    117    This value is write-only. File Name: ".\QEProperty.cpp". Line: 145    1
    2014-6-2 8:30:56.278    57208    .\odbcapi.cpp    301    Beginning COdbcapi::DriverConnect    20
    2014-6-2 8:30:56.342    57208    .\odbcapi.cpp    335    Ending COdbcapi::DriverConnect    20
    2014-6-2 8:30:56.342    57208    .\connect.cpp    2170    SQLDriverConnect succeeded: DSN = 192.168.13.172, User ID = sa, Password = ********    10
    2014-6-2 8:30:56.348    57208    .\qecommon.cpp    117     File Name: ".\QEQueryInfo.cpp". Line: 826    1
    2014-6-2 8:30:56.348    57208    .\qecommon.cpp    117     File Name: ".\QEQueryInfo.cpp". Line: 854    1
    2014-6-2 8:30:56.348    57208    .\qecommon.cpp    117     File Name: ".\QEQueryInfo.cpp". Line: 826    1
    2014-6-2 8:30:56.348    57208    .\qecommon.cpp    117     File Name: ".\QEQueryInfo.cpp". Line: 826    1
    2014-6-2 8:30:56.348    57208    .\qecommon.cpp    117     File Name: ".\QEQueryInfo.cpp". Line: 854    1
    2014-6-2 8:30:56.348    57208    .\qecommon.cpp    117     File Name: ".\QEQueryInfo.cpp". Line: 826    1
    2014-6-2 8:30:56.348    57208    .\qecommon.cpp    117     File Name: ".\QEQueryInfo.cpp". Line: 854    1
    2014-6-2 8:30:56.348    57208    .\qecommon.cpp    117     File Name: ".\QEQueryInfo.cpp". Line: 916    1
    2014-6-2 8:30:56.348    57208    .\QERowset.cpp    1184    Beginning CQERowset::readFirstRecord    20
    2014-6-2 8:30:56.348    57208    .\QERowset.cpp    2149    Beginning CQERowset::restart    20
    2014-6-2 8:30:56.348    57208    .\QERowset.cpp    2370    Beginning CQERowset::execute    20
    2014-6-2 8:30:56.353    57208    .\DbQueryBuilder.cpp    514    Query Targets: sqlncli10, ODBC3SQLServer    10
    2014-6-2 8:30:56.353    57208    .\DbQueryBuilder.cpp    525    Successfully built query:    SELECT "Orders"."Customer ID", "Orders"."Employee ID"   FROM   "xtreme"."dbo"."Orders" "Orders"    10
    2014-6-2 8:30:56.353    57208    .\odbcapi.cpp    875    Beginning COdbcapi::ExecDirect    20
    2014-6-2 8:30:56.354    57208    .\odbcapi.cpp    884    Finishing COdbcapi::ExecDirect    20
    2014-6-2 8:30:56.354    57208    .\rowset.cpp    220    SQLExecDirect succeeded:  SELECT "Orders"."Customer ID", "Orders"."Employee ID" FROM   "xtreme"."dbo"."Orders" "Orders"    10
    2014-6-2 8:30:56.354    57208    .\QERowset.cpp    2814    bindToField succeeded: Orders.Customer ID is using client buffer    10
    2014-6-2 8:30:56.354    57208    .\QERowset.cpp    2814    bindToField succeeded: Orders.Employee ID is using client buffer    10
    Notice it doesn't try to connect first if I set the log on info first using code.
    So nothing we can do to stop SQL server from logging this info. Check with the DBA, possibly they can "filter" out the application attempts to connect or change your work flow in the app.
    If you have a Preview Button to view the report then simply add your Database log on info prompt there if Connectioninfo.Trusted is not true:
    mainSecureDB = rpt.Database.Tables[tableIndex].LogOnInfo.ConnectionInfo.IntegratedSecurity;
    if mainSecureDB = false then prompt the user for log on info and set accordingly, if it is true the it should not fail when it connects.
    This is simply a matter of changing your App work flow...
    Thanks
    Don

  • Crystal Reports 2008 - Error setting new datasource location

    Hi All,
    We are experiencing an issue while trying to set datasource location for our RM 3.0 reports in Crystal Reports 2008 designer. As per guide "SAP BusinessObjects Process Control 3.0 and Risk Management 3.0 - How to build and Personalize Custom Crystal Reports" (step 11), after opening the desire report we go to DataBase-->Set DataSource Location and when selecting our RM system (which actually has the BI content addon installed on it), we got the following error message:
    "Some tables could not be replaced, as no match was found in the new data source. Please verify the table required for any unmodified tables"
    I'm new on this so I'm not sure if the table indicated in the original datasource should exist in my DB (new datasource) before doing this? If so, how those tables are imported or created in our DB?
    Could you please help me on this issue?
    Please let me know if any other detail or data is required.
    Regards

    Hi Don,
    Thanks for the update.
    Actually I've installed SAP Integration Kit and its Fixpack in both....BOE Server (which is the same as the SAP server) and in client pc.  In all cases we have select a typical installation which supposes the required drivers are available. Also I've followed Ingo's documentation to activate and publish standard Risk Management reports (RM reports). Everything works ok with them. We are able to access reports through the application.
    The issue appears when trying to customize one of these standard reports through CR Designer. For example if we select the "GRRM_Risk_by_Risk_Category" and try to customize it as indicated in the "SAP BusinessObjects Process Control 3.0 and Risk Management 3.0 - How to build and Personalize Custom Crystal Reports"...the table behind this report (table GRFN_CY_API_GRRM_R1) it's not in our RM System. My main concern or question is regarding this....Did I miss something while importing transports files, activating or publishing RM reports, etc....and thatu2019s the reason why this (and any other) table is not already in my system? I was not able to find where those tables are supposed to be or how they should be imported in my system. The odd thing is...that we are trying to customize and set the new data source for these reports to the same system from where they are being opened. Put in this way...RM reports have been activated in system A (RM System) and published to system B (BOE System). While customizing reports through CR Designer...we are actually opening reports from system A. These reports have as their original data source...a demo SAP system info (uxcir1p.wdf.sap.corp) and when we want to update this data source with our RM system....the error appears. The whole process is explained in the above mentioned guide for your reference.
    Hope being clear enough..
    Thanks for your help

Maybe you are looking for

  • In my newest desktop version of Thunderbird the arrow that marked my emails as ' already replied to' is gone. How can I get it back?

    In the newest version of Thunderbird my inbox doesn't show anymore the arrow that indicated I have replied to an email, which is quite annoying. The arrow to indicate I have forwarded a message is still there but the other one is gone. I like to have

  • SAVE PDF FORM WITH PYTHON

    Hi All, I have a pdf form generated with adobe 9.0 . We using it as an order form in our application. So application download the file prompts to the user . Is there any way I could save it to a location with in my python app. ie is it possible to in

  • Quick question about using iPhone before activation

    Hi, I'm wondering if the iphone's other capabilities are usable even prior to activation. For example, before I activate my service, can I use it as an iPod? I'm asking because my friend bought one and it seems to give him no other choices but to act

  • Trying (and failing) to delete photos in iPhoto '09

    I am trying to delete some photos in iPhoto. I have used the option to move the photos to trash (the trash in iPhoto) - then used the option to empty the iPhoto trash. The pictures are successfully removed from the library and the trash box. However,

  • How to compile and excecute a downloaded flex project

    I've a problem during the compile of downloaded flex projects (with Flex Development) I copy the project folder in Flex Builder 3 folder Now.... File -> Import -> Flex Project I Import the project in Flex Dev I execute the debug ... or I execute the