Crystal Reports 2008 Runtime for 64 bit iis

I have just finished developing several reports on my 32 bit developer machine.  My application is an asp.net web application using DotNetNuke.  I am not trying to use the Crystal Report Viewer.  I am exporting the report document to a pdf.  On the developer machine everything works as expected. 
I moved the project to production which is a 64 bit windows server running iis 7.* 
I quickly found the issue of the cr runtime not being compatible with 64 bit compilation.  I changed the application pool to run in 32 bit mode.
Now I am getting the following error: 
An unhandled exception occurred and the process was terminated.
Application ID: DefaultDomain
Process ID: 3152
Exception: System.Runtime.Serialization.SerializationException
Message: Type 'CrystalDecisions.CrystalReports.Engine.LoadSaveReportException' in Assembly 'CrystalDecisions.Shared, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' is not marked as serializable.
StackTrace:    at System.Runtime.Serialization.Formatters.Binary.WriteObjectInfo.InitSerialize(Object obj, ISurrogateSelector surrogateSelector, StreamingContext context, SerObjectInfoInit serObjectInfoInit, IFormatterConverter converter, ObjectWriter objectWriter)
   at System.Runtime.Serialization.Formatters.Binary.ObjectWriter.Write(WriteObjectInfo objectInfo, NameInfo memberNameInfo, NameInfo typeNameInfo)
   at System.Runtime.Serialization.Formatters.Binary.ObjectWriter.Serialize(Object graph, Header[] inHeaders, __BinaryWriter serWriter, Boolean fCheck)
   at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.Serialize(Stream serializationStream, Object graph, Header[] headers, Boolean fCheck)
   at System.Runtime.Remoting.Channels.CrossAppDomainSerializer.SerializeObject(Object obj, MemoryStream stm)
   at System.AppDomain.Serialize(Object o)
   at System.AppDomain.MarshalObject(Object o)
Any help would be appreciated as I am to demonstrate the reports to my board next week.

I'm going to guess you are trying to store the ReportDocument in session, and your IIS server is setup to save session objects on a state server, or something other than the default of inProc which requires objects to be serializable, unfortunately most objects within the Crystal Reports SDK are not serializable.

Similar Messages

  • Error in Crystal Reports 2008 Runtime Version = 12.2.3.467

    Dear Support Team
    <br />
    <br />
    I am making the setup for our application using InstallShield 2010.
    <br />
    <br />
    I recently updated the crystal reports 2008 runtime to version = 12.2.3.467.
    <br />
    <br />
    Based on this article
    <br />
    <br />
    <br />
    <br />
    Topic of the week (October 15, 2009)  
    <br />
    Date time field is blank when using ADO .NET dataset and Crystal Reports 2008, Service Pack 2.0
    <br />
    This is a new issue, very specific to CR 2008 and SP 2. Date time fields are stripped out of a report (or not
    <br />
    visible), if a report is consuming a .NET dataset which contains a date time field. A technical escalation has been
    <br />
    submitted and a work-around is detailed in note number 1392258
    <br />
    <br />
    <br />
    Since DateTime Column was not getting displayed in the deployment machine when running the report.
    <br />
    <br />
    So I downloaded the Crystal Report 2008 FP2.3 and merge module for the same and installed on my development machine
    <br />
    <br />
    where I am making the Setup.
    <br />
    <br />
    I am able to make the setup successfully without errors, but when I try to install the setup on the deployment machine I am getting
    <br />
    the errors as
    <br />
    <br />
    Error 1904.Module C:\Program Files\BusinessObjects\BusinessObjects Enterprise 12.0\win32_x86\CEReportSource.dll
    <br />
    failed to register
    <br />
    Same message pops up for N number of Crystal Dlls with message failed to register.
    <br />
    Even though as per article in your forums I am doing everything right.
    <br />
    I have correct Dll for VC++ 2005
    <br />u2022
    <br />
    Microsoft_VC80_ATL_x86.msm; version 8.0.50727.762
    <br />
    <br />
    u2022 Microsoft_VC80_CRT_x86.msm version 8.0.50727.762
    <br />
    <br />
    u2022 Microsoft_VC80_MFCLOC_x86.msm; version 8.0.50727.762
    <br />
    <br />
    u2022 Microsoft_VC80_MFC_x86.msm; version 8.0.50727.762
    <br />
    <br />
    u2022 Microsoft_VC80_OpenMP_x86.msm; version 8.0.50727.762 
    <br />
    <br />
    With exactly same versions as mentioned in the article.
    <br />
    <br />
    I followed the article in your forum
    <br />
    Building a deployment project with Crystal Reports 2008 (12.1.0.892) SP1
    <br />
    Posted on Mar. 09, 2009 08:22 AM in Business Objects
    <br />
    The same sort of errors is coming but I am doing everything right as per that article.
    <br />
    <br />
    To Inform you further before updating crystal reports 2008 runtime to version = 12.2.3.467.
    <br />
    <br />
    Everything was working fine, only problem was that Date Time column was not displaying at runtime on the deployment
    <br />
    <br />
    machine.
    <br />
    <br />
    With Regards
    <br />
    Arshad
    Edited by: arshhb on Dec 29, 2009 7:11 AM

    Dear Mr. Williams
    I dont think this is the issue related to MS Installer. Still based on your suggestion I downloaded the latest MS Installer from Microsoft Website and Installed on my setup machine and made the new setup with zero errors and warning.
    The deployment machine is having full rights and so there is no security issues  related to installation even though to clear the confusion I installed the setup on three other xp machines the result was same even after installing the latest MS installer on those machines as well.
    I wanrt to remind it again since I was facing the DATE TIME column Issue problem in reports on deployment machines so I updated the Crystal Reports TO CRFP 2.3 EXE AND MSM as mentioned in your forums regarding this known bug that if datetime column is getting from dataset then that column was not getting displayed.
    From that time onwards I am unable to install the setup on the deployment machines and I am getting errors unable to register errors crystal reports dlls.
    Apart from that I downloaded Crystal Reports 2008 Fix Pack 2.3 - Redist Install  (cr2008_fp23_redist.zip)  from the download page but i can't open it I am gettinig the error message doesnt appear to be a valid archive.
    Please help me and provide me some solution regardeing the issue I am stuck with.
    With Regards
    Arshad

  • Crystal Report 2008 Runtime License

    Hi,
    I have a Crystal Report 2008 designer license.
    I want to design reports and distribute to my clients.
    Clients will just execute the reports through my application with the Crystal Report 2008 Runtime.
    There is runtime available on:
    https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm
    While installing the runtime it does not ask for any license key.
    my query is do we require any license to use the Crystal Report 2008 Runtime?
    Can we install the same runtime on web servers so that multiple clients can use it.
    Do we require any license for the Runtime on server?
    Thanks,
    Abhijit

    Hi Thanks for the reply.
    Just to make it sure is that means?
    1. Crystal Report 2008 Runtime is free for the client applications.
    2. Crystal Report 2008 Runtime requires the 'SAP Crystal Reports runtime server license' to use the runtime on server applications.
    Is it correct.
    Thanks,
    Abhijit

  • Urgently required Crystal Reports 2008 FixPack_03 for SAP B1 8.8

    Dear All,
    I Urgently need Crystal Reports 2008 FixPack_03 for SAP B1 8.8. It is unavailable on the following link:
    Crystal Reports 2008 Reference [original link is broken]
    I have also searched it but unable to find it. If anyone has this, kindly share it.

    Hi Iqbal,
    There is a service pack in the following link
    https://www.sdn.sap.com/irj/sdn/businessone?rid=/webcontent/uuid/807d22cb-cb1d-2b10-8794-fb76d7feca88 [original link is broken]
    There is a fix pack 03 included in the folder, I don't know if this is relevant.
    Cheers

  • Windows Server 2008 R2 Crystal Report XI Runtime hosted on IIS 7 32 bit

    Hi all,
    We have discovered that our software department installed Windows Server 2008 R2 in a production environment.
    The production environment hosts asp .net applications on IIS 7 that enables 32 bit applicatons to run over it.
    We still develope on Windows XP and Visual Studio 2005 using Crystal Report XI runtime.
    Reports are compatible and run properly in production environment having enabled application pool of IIS 7 in 32 bit mode.
    Is Crystal report XI runtime supported on windows server 2008 R2 hosted on IIS7 32 bit mode?
    Regards.
    Roberto.

    Hello,
    Where to start.... first thing to do is search, lots of posts on these exact questions...
    First, CR XI R2 does not support 4.0 framework, although MS does say it's fully backward compatible but it is not supported on Windows 2008 R2 unless you upgrade to CR XI R2A
    https://smpdl.sap-ag.de/~sapidp/012002523100009114712011E/crxir2sp4_fullbuild.exe
    https://smpdl.sap-ag.de/~sapidp/012002523100009114412011E/crxir2sp6_incremental.exe
    Or for a clean PC https://smpdl.sap-ag.de/~sapidp/012002523100009114712011E/crxir2sp4_fullbuild.exe
    Redist is on our download page.
    Second is CR XI R2 is not supported in VS 2010. Only one supported is CR for VS 2010 which you can download from here:
    http://www.sdn.sap.com/irj/boc/crystalreports-dotnet
    Bottom of the page has all of the download links for the 32 and 64 bit runtime for your WEB server.
    App Pool must run in 32 mode, just in case you are using 64 bit OS.
    Lastly, if you are using the SAP Integration Kit to connect to your BEX query then bad news, CR for VS 2010 doesn't have API's available to set the log on on info.
    You may be able to use B1, it uses CR 2008 OEM Build and they may support this. Search that forum to see if they do:
    /community [original link is broken]
    Don

  • Crystal Reports 2008 Runtime, Windows Server 2008 64-Bit AND SharePoint2007

    Hi Guys,
    here i'm again.
    Well I'm developing on a 32-Bit OS with Crystal Reports 2008. I've deployed my solution to SharePoint, but when i try to call a report in the aspx-Website i get the following error:
    Exception Details: CrystalDecisions.CrystalReports.Engine.LoadSaveReportException: An error has occurred while attempting to load the Crystal Reports runtime. Either the Crystal Reports registry key permissions are insufficient, or the Crystal Reports runtime is not installed correctly. Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information.
    Here are the technical details:
    - Windows Server 2008 (64Bit)
    - IIS7
    - Microsoft Office Server 2008 (64Bit)
    - Crystal Reports 2008 SP3
    I've read, that there isn't a 64-Bit runtime version of CR2008. Then i tryed the two following suggestions i found in this forum:
    1. Try to run the IIS-Application-Pool in 32-Bit-Mode -> This don't work, because SharePoint then throws a "Internal Server Error - Code 500" (no SharePoint Sites are available).
    2. Try to compile the Visual Studio Project as 32-Bit -> This don't work, because SharePoint could not load the assembly
    Well, are there any other hints, suggestions or  experiences how i could get this to work?
    Thanks in advance,
    Christian
    Edited by: C.Kaiser on Oct 12, 2010 5:22 PM

    Hi,
      I Have a Doubt Similarly which is related to the above post.....
    I had created a asp.net website with sql db, Its running fine in my PC, But when i host it in my server It shows an Error like..
    Configuration Error
    Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
    Parser Error Message: Could not load file or assembly 'CrystalDecisions.Design, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified. "
    I am Using Visual Studio 2010, and my Server is Windows Server 2008 R2 32bit
    I am also attaching the screenshot of the error.
    Can anyone Please Help me , Its Very urgent..
    Anyone Please Help Me ,,,, Its Very Urgent .......
    Thanks In Advance...

  • Crystal Reports 2008 runtime error while running on Windows Server X64

    I have a .NET web application compiled as X86 in Visual Studio 2008 invoking Crystal Reports 2008 SP2 that's running fine at a number of sites running Windows Server 2003 X86.</br>
    </br>
    When deploying this app to Windows Server 2008 X64 I get the error message below. </br>
    </br>
    I'm aware that there is an unanswered question similar to this already in the forum but my application is compiled for X86 and I've tryed installing a variety of run times including "crruntime_12_2_mlb.msi" and "crredist2008_x86.msi".</br>
    </br>
    What combination of compile and run time is needed to get around this issue?</br>
    </br>
    Thanks.</br>
    </br>
    </br>
    ERROR MESSAGE **.</br>
    </br>
    An error has occurred while attempting to load the Crystal Reports run time..</br>
    </br>
    Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly..</br>
    </br>
    Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) that contains the version of the Crystal Reports runtime (x86, x64, or Itanium)  that is required.  Please go to http://www.businessobjects.com/support for more information.
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. .</br>
    </br>
    Exception Details: CrystalDecisions.CrystalReports.Engine.LoadSaveReportException: An error has occurred while attempting to load the Crystal Reports runtime..</br>
    </br>
    Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly..</br>
    </br>
    Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) that contains the version of the Crystal Reports runtime (x86, x64, or Itanium)  that is required.  Please go to http://www.businessobjects.com/support for more information..</br>
    </br>
    Source Error: .</br>
    </br>
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.  .</br>
    </br>
    Stack Trace: .</br>
    </br>
    [LoadSaveReportException: An error has occurred while attempting to load the Crystal Reports runtime..</br>
    </br>
    Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly..</br>
    </br>
    Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) that contains the version of the Crystal Reports runtime (x86, x64, or Itanium)  that is required.  Please go to http://www.businessobjects.com/support for more information.]
       CrystalDecisions.CrystalReports.Engine.ReportDocument.CheckForCrystalReportsRuntime() +399.</br>
       CrystalDecisions.CrystalReports.Engine.ReportDocument..cctor() +218.</br>
    </br>
    [TypeInitializationException: The type initializer for 'CrystalDecisions.CrystalReports.Engine.ReportDocument' threw an exception.].</br>
       CrystalDecisions.CrystalReports.Engine.ReportDocument..ctor() +0.</br>
       ChartsEnterprise.UI.GenReport.CreateReport(String reportname) +42.</br>
       System.EventHandler.Invoke(Object sender, EventArgs e) +0.</br>
       System.Web.UI.Control.OnLoad(EventArgs e) +132.</br>
       System.Web.UI.Control.LoadRecursive() +66.</br>
       System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean .</br>includeStagesAfterAsyncPoint) +2428.</br>
    Edited by: PSernz on Mar 25, 2010 3:58 AM

    What combination of compile and run time is needed to get around this issue?
    See [this|https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=56787567] wiki. I think I may not have that wiki updated up to FP2.5, so the FP2.5 msm is here:
    https://smpdl.sap-ag.de/~sapidp/012002523100002975182010E/cr2008fp25_mm.zip
    msi is here:
    https://smpdl.sap-ag.de/~sapidp/012002523100002975312010E/cr2008fp25_redist.zip
    Check the version of the CR assemblies referenced in your project. The use the wiki above to deploy the correct runtime.
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup

  • Print layout different with crystal report 2008 runtime

    Hi,
    I have reports which I print on a pre printed stationary. With Crystal report 11.5 run time it works fine.
    Now I am using Crystal Report 2008 run time and with this I found that layout on the print is different than the actual layout in the design.
    The print with CR 2008 run time is not exactly matching with the pre printed stationary. Whereas it is working fine with the 11.5 run time.
    Can anyone please help?
    Thanks,
    Abhijit Gorhe

    hi,
    you can verify the settings
    File -> Page Setup
    - Printer Options
    - Page Options
    - Margins
    Regards,
    Vamsee

  • Crystal Reports 2008 Runtime creates Logon Fialed error

    i have a client running Crystal REport 2008 SP4.  They are now receiving this error when running reports.
    Logon failed.
    Details:  [Database Vendor Code: 18456 ]
    Logon failed.
    Details:  [Database Vendor Code: 18456 ]
    Error in File Sick Leave Taken from Anniversary Date {0F164D11-4856-4C12-9EA7-2CE3C3F0861E}.rpt:
    Unable to connect: incorrect log on parameters.
    Details:  [Database Vendor Code: 18456 ]
    The report runs fine on my development environment.  What could be causing the error?

    See if the blog [Understanding "login failed" (Error 18456) error messages in SQL Server 2005|http://blogs.msdn.com/b/sql_protocols/archive/2006/02/21/536201.aspx] will help (big assumption on my part re. the db you are using...)
    See the article [Troubleshooting Guide to Database Connectivity Issues with Crystal Reports in Visual Studio .NET Applications|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0225775-88c4-2c10-bd80-8298769293de]
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup
    Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

  • Deploying Crystal Reports 2008 runtimes without using MSI/MSM

    Post Author: windentdev
    CA Forum: Deployment
    We are having multiple issues with using the MSI or the Merge module to deploy the 2008 runtimes.
    Specifically, one of the issues is that PrintControll.dll will not register and causes the runtime package to fail.
    How can we deploy these run times w/o using the MSI or merge module??
    We just upgraded from Crystal Reports 11.5 and this is becoming a burden to our project.  Are there any whitepapers on what is needed or any other instruction that may assist us in a sucessful deployment of these runtimes?

    Post Author: Justin Azevedo
    CA Forum: Deployment
    I eventually found the problem. I used depends to trace the printcontrol.dll and found that it requires msvcr71.dll to be installed in the system folder. This is a Visual C++ 7.1 (.net 2003) library. It looks like Business Objects forgot to put this into their runtime installer. That is why it works on some computers and not others. Some computers have this dll file installed as part of other software (including other crystal reports versions). I created a patch installer that basically drops this dll file into the system folder. Once that is done, then the runtime installs correctly.
    If you would like to recreate this problem, try installing the CR2008 runtime (MM, EXE, or compact) on a FRESH copy of Windows. It will error out everytime.
    If anyone reading this would like my patch, please send me an email.

  • Exception with Crystal Reports 2008 Runtime SP2 and Export to Word/RTF

    When I export a report (DataSource ADO.NET DataSet) with many records (in my case about 17000 but the records are stretched from about 370 pages to about 800 pages ), I get an exception:
    System.Runtime.InteropServices.COMException: Ungültiger Zeiger (German, English: Invalid pointer?)
    When I dont't stretch the records (that means record by record without pagebreak) it works fine.
    Any ideas?
    I think the problem is the expected file size. When I export from the development enviroment the doc-file is 566 MB. Open this wiht MS-Word I get the Message: Word cannot open files > 512 MB.
    Somehow the problem seams to depend on this fact.
    Anyway, MS-Word cannot work with files > 512 MB. So I don't need to think about the problem further.
    Edited by: Sven G. on Mar 24, 2010 11:14 AM

    That is an interesting finding.
    One thing you may want to try is FP 2.5. Perhaps the exported file will be smaller and thus let you export more pages(?). Other than that, keeping the file size down via selection formulas or smaller datasets will be the way to go.
    FP2.5 is here:
    https://smpdl.sap-ag.de/~sapidp/012002523100002975192010E/cr2008fp25.exe
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup

  • Runtime Error  loading Crystal Reports 2008

    Hi there
    I have recently purchased online in the sap site the bundled product that includes SAP Crystal Reports and SAP Crystal Dashboard Design on the sap website. For those I received only one key code
    I downloaded both products and manage to installed and load SAP Crystal Dashboard Design. I have installed SAP Crystal Reports (CR2008LPs_02142011.exe) everything goes well. When I start the program it loads for a second and then I get the following error:
    u201C Runtime Error!
    Program: c:\Program Files\Businessu2026
    This application has requested the Runtime to terminate it in an unusual way.
    Please contact the application support team for more information.u201D
    My OS is Windows 7 Enterprise 32-bit
    I have tried the following:
    u2022     Uninstalling and reinstalling again
    u2022     Downloading the file again from the sap site in case the file was corrupted
    u2022     I have uninstalled CR and download the SAP Crystal Reports trial version from SAP site
    u2022     Trying to navigate to the registry to clear the registry for recent files (as I have seen in this thread Crystal Reports 2008 Runtime Error) . I get the following error message when I click on u201CHKEY_CURRENT_USER/Software/Business Objects/Suite 12.0/Crystal Reports/Recent Filesu201D. Error:
    "Error opening Hey:
    Crystal Reports cannot be opened
    An error is preventing this key from being opened
    Details: Access is denied"
    I have been unsuccessful with all the above.
    I would appreciate if someone could help.
    Thanks in advance and regards,
    Santiago

    Hi Santiago,
    That error suggests you are not a local PC administrator. CR installs require you use an account that can update registry keys etc.
    Talk to your IT guys to give you full access to your PC or log on as the local PC Administrator and install it again.
    Thank you
    Don

  • Getting an error trying to install Crystal Reports 2008 on a 64 bit Windows

    reformatted my computer and now I'm trying to install Crystal Reports 2008 on 64 bit windows 7 box.  When the "Registering modules" portion of the install comes up, I get a message that a dll has failed to register.  I saw something about not having the Microsoft Visual c++ 2005 redistributable pack (x86) installed but that was not it either.
    The cd label say Crystal Reports to Crystal Reports 2008 Upgrade, but it does not seem like I have to have the older version of Crystal insatlled.
    Any ideas how to fix this ?

    Hello together,
    i've had the same problem. Tried to install CR SP 2 "cr2008win_sp2.exe" onto an existing CR 2008 SP1 installation, and got the above error. After extracting the cr2008win_sp2.exe to an folder using Winzip (or just start Installation, the source would be extracted to "c:\temp" ), navigate to the subfolder "\package" and execute the CrystalReports.msp (in my case: c:\temp\package\CrystalReports.msp). This start's the Installation of SP 2. If you get an version mismatch, use parameter SKIP_PATCH_VERSION_CHECK=1 by typing command in an dos prompt "c:\temp\package\CrystalReports.msp SKIP_PATCH_VERSION_CHECK=1" but remember, you need to have an SP1 installed (somebody said, SP's are incremental).
    Reboot and apply then the  CR 2008 SP2 FixPack 7 "cr2008fp27.exe". Use this Link to Download CR and Xcelsius Stuff:
    [https://service.sap.com/sap/bc/bsp/spn/bobj_download/main.htm]
    I would suggest you not to use IE for downloading, use an alternative browser. I got only bad downloads (IE8 on Win7).
    This is the way i did and this works pretty good.
    Good Luck
    Matthias

  • Where can I find the latest upgrades for Crystal Reports 2008

    Hello all
    My question is rather simple, I need to know. Where can I find  the latest upgrades for:
    1) Crystal Reports 2008 Merge Modules
    2) Crystal Reports 2008 Runtimes.
    Are they incremental upgrades ????
    Thanks in advance..
    ADrián.-

    Downloads page is here:
    http://service.sap.com/sap/bc/bsp/spn/bobj_download/main.htm
    [This|https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReports2008-VersionandDownloadinformationforSPsand+FPs] wiki tracks latest SPs and FPs with download links.
    [This|https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=56787567] wiki has links to runtime (I believe I have not updated this for FP 2.5 yet, but the downloads page has these)
    And yes, they are incremental.
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup

  • Crystal Reports 2008 - CR Runtime 12 issue

    We are developing our applications using VS 2008 and I also install the Crystal Reports 2008 developer edition. My project references all DLL's from Crystal Reports 2008 runtime (BusinessObjects\Common\4.0\Managed\dotnet2) to display CR reports in our GUI.
    However, I run into following problems when we walk through the assembly dependencies (our code traverse the dependency tree):
    - The dependency on BusinessObjects.Enterprise.Sdk, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304 cannot be found, which is referenced by CrystalDecisions.Enterprise.Framework
    - Some dll are reported to be using .NET 1.1 runtime (e.g. "BusinessObjects.Licensing.KeycodeDecoder.dll v1.1.4322").
    Where could I find the missing dependencies?
    We are targeting customer installing on .NET 2.0 framework. How could we get around those v1.1.4322 dependencies (through I believe that the Crystal Reports Runtime 12 might install those into our clients)
    Thanks
    Sai-Kit

    First, I never DIRECTLY reference those .NET 1.1 DLL's in my project.
    - understood and expected
    The CrystalDecisions.CrystalReports.Engine.dll however will try to load them as dependencies when my application is run. There is no way not to referencing CrystalDecisions.CrystalReports.Engine.dll.
    - no the CrystalDecisions.CrystalReports.Engine.dll ; will not try to load those assemblies. You can remove those assemblies from GAC. Your app will work just fine. I recommend you try this once you have removed the assemblies from your project..
    We need to deploy the application to our customer. If they only install .NET 2.0, they will ask why .NET 1.1 dll are installed into their computer (of course, as part of CR 12 runtime instead of our application). Also, why CR 10.5 is .NET 1.1 clean and CR 12 goes back to .NET 1.1??? My customer will have that concern after their upgrade.
    - As I mentioned twice now. The CR runtime (msm and / or msi files) do not install those assemblies. So your customer will not even get them installed. I recommend you try the install on a clean computer to see what actually gets installed.
    Ludek

Maybe you are looking for

  • My iPhone 4 keeps restarting by itself. How can I fix this, what is casusing it?

    I've seen several other adds about people saying their iPhone automatically resetting as well, but no salutions or advice of why it could be doing this. My battery seems to drain pretty quickly now too. 100% to 20 In maybe 20mins. My phone gets reall

  • Cannot Install Adobe Acrobat Pro via Adobe Download Assistant - Please Help

    Hi Guys, Please can you help I am trying to download the adobe acrobat pro trial via the adobe download assistant but cannot get the download to complete successfully. Everytime I try and  download the file it freezes when almost totally downloaded (

  • Trouble Creating ringtone in itunes with mac

    ok so i have snowleopard 10.6 and the iphone 4 and i went through everything to create a new ringtone and it doesnt work. i created the aac version, changed the time, changed it to a .m4r. (i followed a tutorial on youtube and when i got all done it

  • Memo Records and Payment Advice - TR-CM

    Hi all of you, Could any one explains me what is the meaning of Memo records and Payment advice, how they reflects the cash / Liquidity forecast? Where we will create those items in SAP? Thanks & Regards Ramki Edited by: Ramki on Jun 3, 2009 2:19 PM

  • Simple textflow maxchar ??

    Hi guys, I thought I would experiment with textLayout. I don't think I want to delve as deep as flash.text.engine. Before I get onto more complicated component design I thought it would be simple enough take a TextFlow Instance and build restrictiven