Crystal reports 2011 failure to pull the master data for AP Items

I am using businessobjects 4.0 and i am also running crystal report 2011.I am connecting to a sap erp ecc 6.0 ehp4 without any issue.The challenge comes when trying to input or pick the master data for example company code .The crystal report does not populate the company code field with master data.Any suggestions?

Hi Venkateswaran,
FIrst of all thanks for offering help...
uploding screen shots, below mentioned screens are captured when I was creating a new report on CR2011, usning SAP standard table "T001", there is no parameters, it is simple report but I didnot get data, if i browse the field through Cystal report is says Data Size is 0.
I also would like to inform you that If i use crystal report 2008 SP3 for same ERP, Same table and same fields, then i get proper data/report.

Similar Messages

What are the T-codes that contain the master data for material and vendor?

what are the T-codes that contain the master data for material and vendor?

hi ,
- Display Material tcodes...
MM01 - Create Material
MM02 - Change Material
MM03 - Display Material
MM50 - List Extendable Materials
MMBE - Stock Overview
MMI1 - Create Operating Supplies
MMN1 - Create Non-Stock Material
MMS1 - Create Service
MMU1 - Create Non-Valuated Material
ME51N - Create Purchase Requisition
ME52N - Change Purchase Requisition
ME53N - Display Purchase Requisition
ME5A - Purchase Requisitions: List Display
ME5J - Purchase Requisitions for Project
ME5K - Requisitions by Account Assignment
MELB - Purch. Transactions by Tracking No.
ME56 - Assign Source to Purch. Requisition
ME57 - Assign and Process Requisitions
ME58 - Ordering: Assigned Requisitions
ME59 - Automatic Generation of POs
ME54 - Release Purchase Requisition
ME55 - Collective Release of Purchase Reqs.
ME5F - Release Reminder: Purch. Requisition
MB21 - Create Reservation
MB22 - Change Reservation
MB23 - Display Reservation
MB24 - Reservations by Material
MB25 - Reservations by Account Assignment
MB1C - Other Goods Receipts
MB90 - Output Processing for Mat. Documents
MB21 - Create Reservation
MB22 - Change Reservation
MB23 - Display Reservation
MB24 - Reservations by Material
MB25 - Reservations by Account Assignment
MBRL - Return Delivery per Mat. Document
MB1C - Other Goods Receipts
MB90 - Output Processing for Mat. Documents
MB1B - Transfer Posting
MIBC - ABC Analysis for Cycle Counting
MI01 - Create Physical Inventory Document
MI02 - Change Physical Inventory Document
MI03 - Display Physical Inventory Document
MI31 - Batch Input: Create Phys. Inv. Doc.
MI32 - Batch Input: Block Material
MI33 - Batch Input: Freeze Book Inv.Balance
MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
MIQ1 - Batch Input: PhInvDoc. Project Stock
MI01 - Create Physical Inventory Document
MI02 - Change Physical Inventory Document
MI03 - Display Physical Inventory Document
MI31 - Batch Input: Create Phys. Inv. Doc.
MI32 - Batch Input: Block Material
MI33 - Batch Input: Freeze Book Inv.Balance
MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
MIQ1 - Batch Input: PhInvDoc. Project Stock
MI01 - Create Physical Inventory Document
MI02 - Change Physical Inventory Document
MI03 - Display Physical Inventory Document
MI31 - Batch Input: Create Phys. Inv. Doc.
MI32 - Batch Input: Block Material
MI33 - Batch Input: Freeze Book Inv.Balance
MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
MIQ1 - Batch Input: PhInvDoc. Project Stock
MI21 - Print physical inventory document
MI04 - Enter Inventory Count with Document
MI05 - Change Inventory Count
MI06 - Display Inventory Count
MI09 - Enter Inventory Count w/o Document
MI34 - Batch Input: Enter Count
MI35 - Batch Input: Post Zero Stock Balance
MI38 - Batch Input: Count and Differences
MI39 - Batch Input: Document and Count
MI40 - Batch Input: Doc., Count and Diff.
MI08 - Create List of Differences with Doc.
MI10 - Create List of Differences w/o Doc.
MI20 - Print List of Differences
MI11 - Physical Inventory Document Recount
MI07 - Process List of Differences
MI37 - Batch Input: Post Differences
for vendor..
XKN1 Display Number Ranges (Vendor)
XK01 Create vendor (centrally)
XK02 Change vendor (centrally)
XK03 Display vendor (centrally)
XK04 Vendor Changes (Centrally)
XK05 Block Vendor (Centrally)
XK06 Mark vendor for deletion (centrally
XK07 Change vendor account group
XK11 Create Condition
XK12 Change Condition
XK13 Display Condition
XK14 Create with cond. ref. (cond. list)
XK15 Create Conditions (background job)
reward points if useful,
venkat.

Please maintain the master data for material during product cost collector

hi
i get a error
please maintain the master data for material during product cost collector
please guide me
regards
leo

Hi Leo,
Can you elaborate your issue, like when did you get the error exactly?
If it is the error you got while creating Product Cost Collector, then this is not the right Forum to post.
Please post your question in the 'ERP Manufacturing (PP)' forum
Regards,
Manimaran M

How to Load the Master Data for custom defined Z infoobjects?

Hi Gurus,
This is the requirement.
Some screen enhancements has to be made by adding new Custom fields( like two text boxes,eg Name and city ) in such a way if we enter data into that text box,that data value for both of the Enhancements has to be stored in some table.If this data is a master data,then how would I pull this master data into BW.
Please someone throw some light on this problem.
Lets say a Screen is enhanced with NAME and CITY with text text boxes.Let the user enters the value for NAME and CITY.Let them be stored under two different tables ZTAB1 and ZTAB2.How would I load this master data into custom Defined Z infoobjects ZNAME AND ZCITY in BW.
Please help me out.
Thanks is Advance,
Regards

you can by creating generic datasources on thoase tables with Full load or delta.
if the number entries is less.. you can try full load...
if it is more... along with required fields...put date also as one fields. which needs to get date of execution of program or date of uploading to Tables. this will be useful build Delta Mechanism.
all the best.
Nagesh Ganisetti.

SAP Crystal Reports 2011/2013 doesn't show Company Data Base

I have CR versions 2011 and 2013 in several clients, and I can't connect to SAP B1 through the integration component. The behavior is that when I fill all the fields, I can't see the Company DataBases; if I type it manually and click "finish" I get the "conexion failed" error. With version 2011 it was working and then stoped working just like that. With 2013 has never worked. I've read in several forums that this error is recognized by SAP since early 2008 versions, but only talk about future "fixes". I've checked if any fix for 2013 is available but no lucky, it seems that fixes is a mess with CR.
See screenshot. Any ideas how to fix this? is this really a bug?
I have SAP 9 PL 9.
UPDATE: My SAP Partner Support has told me this error is caused by the version of SQL I have (which is 2012) and that SAP will release a patch to correct this soon, is this correct?

Hi,
Please check SAP note:
1966132 - SAP Business One 9.0 PL09 (SQL & HANA) supports SAP Crystal Reports 2013, version for the SAP Business One application
Thanks & Regards,
Nagarajan

Reading the master data for an info object

hi experts,
I have a requirement, can i use the read master data option in transformations of a cube and store the text data related to material ??
thanks and regards
vijay
Edited by: pedamarla on Apr 17, 2009 12:25 PM

Hello Vijay,
As suggested above, you wont be able to read master data text of an InfoObject in your transformation, if you need to achive this, in the transformation routine, for the InfoObject, where you need to feed the material text, you would need to read the text table of InfoObject 0MATERIAL.
Please let me know if you need any more information.
Regards,
Pankaj

INTERNET CONNECTION NOT DETECTED message with Crystal Reports 2011

Hello:
We upgrade from SQL 3008 R2 to SQL 2012 SP1. Had trouble with Crystal Reports not opening reports. Information on the internet indicated that you had to reinstall Crystal Reports after upgrading SQL. We did a repair of Crystal Reports 2011. I have the box checked to check for updates when Crystal Reports starts. I am now getting INTERNET CONNECTION NOT DETECTED and the application will not check for updates. We have tried turning of the firewall and almost everything else we can think of. I have access to the internet from that server and IE9 works just fine. Can anyone help, please.
Thank You,
Jack G.

Hello Jack,
This one helps: INTERNET CONNECTION NOT DETECTED
Internet Connection failure
--Dhana

SAP Crystal Reports 2011: Error INS00140 and other install errors

Hi all,
There have been many customers who have downloaded the Crystal Reports 2011 installation package and have run into an error when the installer attempts to recognize the keycode being used. The error received is "The Product Keycode is not valid INS00140."
This thread is meant to track all current resolutions that have been determined based on troubleshooting with customers thus far. In addition, the thread will provide you with the list of things that we need to know in order to properly troubleshoot the issue.
Before attempting any of the steps below, please be sure that you are using the latest version of Crystal Reports 2011 which is SP02. You can download this version from the SAP [website|http://www.sap.com/solutions/sap-crystal-solutions/query-reporting-analysis/sapcrystalreports/index.epx].
Coy
====================
Resolution Options
Windows XP & Microsoft Visual C++ Redistributable
If you are installing Crystal Reports 2011 on Windows XP, then you need to ensure that the following Microsoft patches are not installed on the machine. You can check this by using the Add / Remove Programs dialogue.
KB2467175
KB2467174
KB2467173
If any of these are installed, then please remove them before attempting to install Crystal Reports 2011.
Installing with Dashboard Design 2011 or Presentation Design 2011
If you are installing Crystal Reports 2011 on the same machine as Dashboard Design 2011 or Presentation Design 2011, then there may be a problem with the registry key that points to the location of the keydecoder DLL. To check this, launch run regedit and navigate to the following location:
HKEY_LOCAL_MACHINE\SOFTWARE\SAP BusinessObjects\Suite XI 4.0\Shared Tools\keydecoder.dll
You want to make sure that the "path" key is pointing to the valid path for the keydecoder.dll. The correct path to the DLL should be: C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win32_x8keydecoder.dll.
Uppercase License Key
In addition to the above, you need to make sure that you are entering the license key in all uppercase characters. There is a current issue with the installer where it does not accept lower case characters.
Fix - Coming in SP02, but can implement manually for now
Locate the BCM-4-0.dll.2.Config file in the <install package directory>\dunit\product.crystalreports-4.0-core-32\actions
(replace crystalreports with crystalreportsjava for CR for Ent and xcelsius for dashboards)
Open BCM-4-0.dll.2.Config
Locate this line:
<bindingRedirect oldVersion="8.0.50727.0-8.0.50727.1434" newVersion="8.0.50727.4053" />
Modify the oldVersion number to make the line like this one:
<bindingRedirect oldVersion="8.0.50727.0-8.0.50727.4053" newVersion="8.0.50727.4053" />
This should allow you to install without issue.
Further Troubleshooting
If none of the above helps to resolve the issue, then we need the following:
The installation logs from the following folder: C:\Documents and Settings\<YOUR USER NAME>\Local Settings\Temp\<DATE OF YOUR LAST ATTEMPTED INSTALLATION>
The results from attempting to run the keycode validator directly. You can find it under the folders that contain the installation package. For example, C:\Documents and Settings\<YOUR USER NAME>\My Documents\CrystalReports2011\DATA_UNITS\CrystalReports\dunit\product.crystalreports-4.0-core 32\actions\isKeyCodeValid.exe -keycode <YOUR KEYCODE> -version 140 -property CR.EnableCR
You should submit a new forum post with relevant details about the error and provide links to download the logs generated by following the above steps.
Edited by: Don Williams on Dec 22, 2011 7:53 AM

Then try these:
1. Download the latest version of the installation package for Crystal Reports 2011. To verify the version of extracted package, open productid.txt file located at: {installation package}\DATA_UNITS\CrystalReports\.
Make sure it is not less than 14.0.2...
2. Where to download Crystal Reports 2011 installation from: - free trial from SAP Online shop http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx - from SDN Community page http://service.sap.com/sap/bc/bsp/spn/bobj_download/main.htm - from Service Market Place http://service.sap.com/sbop-downloads Note: downloads from all above listed locations are fully functional product installations. Trial version defined by expiring key code, not by functionality limitations.
3. Copy the installation package to a hard drive if possible to avoid any networking issues.
4. Login to the machine as Local ADMINISTRATOR.
5. Temporary disable any kind of firewall, antivirus, network security etc., if possible.
6. On the latest versions of Windows, even if logged in as local Administrator, right-click the setup.exe and select "Run as Administrator". If do not have Administrator account, right click "Run as" Select current user and uncheck the "Protect my computer and data from unauthorized program activity".
7. Make sure there is enough space on the computer. If not sure about the space, run "Custom" installation with minimum components. Non-mandatory components could be added at any time.
8. Finally, if there is an existing "InstallData" folder under C:\Program Files (x86)\SAP BusinessObjects rename it to "InstallDataOLD"
Edited by: Don Williams on Dec 22, 2011 7:51 AM

HELP ! Crystal Report 2011 TRIAL - Can't Open Program WITHOUT AN ERROR

Server: windows 2008 R2
1) Crystal Reports 2011 was installed using the Trial version.
2) Added the trial key in the form - OK.
3) Clicked to start Crystal Reports 2011 and a dialog box pops up:
CRYSTAL REPORTS STOPPED WORKING
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Problem signature:
Problem Event Name: APPCRASH
Application Name: crw32.exe
Application Version: 14.0.0.760
Application Timestamp: 4d688f61
Fault Module Name: crw32.exe
Fault Module Version: 14.0.0.760
Fault Module Timestamp: 4d688f61
Exception Code: c0000005
Exception Offset: 00028ada
OS Version: 6.1.7600.2.0.0.16.7
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
FROM EVENT LOG - MORE INFORMATION
~~~~~~~~~~~~~~~~
EVENT LOG
~~~~~~~~~~~~~~~~
CRYSTAL REPORTS 011 - 32 Bit
Windows 2008 R2 Statndard
64 bit, 16 GB ram
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fault bucket 2445902896, type 1
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: crw32.exe
P2: 14.0.0.760
P3: 4d688f61
P4: crw32.exe
P5: 14.0.0.760
P6: 4d688f61
P7: c0000005
P8: 00028ada
P9:
P10:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Faulting application name: crw32.exe, version: 14.0.0.760, time stamp: 0x4d688f61
Faulting module name: crw32.exe, version: 14.0.0.760, time stamp: 0x4d688f61
Exception code: 0xc0000005
Fault offset: 0x00028ada
Faulting process id: 0x1be0
Faulting application start time: 0x01cc367d04e5e87c
Faulting application path: C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win32_x86\crw32.exe
Faulting module path: C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win32_x86\crw32.exe
Report Id: 486fd25a-a270-11e0-b215-842b2b4c199e
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Attached files:
C:\Users\jyanagi\AppData\Local\Temp\WERF967.tmp.WERInternalMetadata.xml
These files may be available here:
C:\Users\jyanagi\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_crw32.exe_149624126266436fca64902e9d839546696c19_00630da2
Analysis symbol:
Rechecking for solution: 0
Report Id: 486fd25a-a270-11e0-b215-842b2b4c199e
Report Status: 0
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The description for Event ID 1904 from source HHCTRL cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
about:blank
http://go.microsoft.com/fwlink?LinkID=45840
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
APPLICATION ERROR - EventID 1000
Faulting application name: crw32.exe, version: 14.0.0.760, time stamp: 0x4d688f61
Faulting module name: crw32.exe, version: 14.0.0.760, time stamp: 0x4d688f61
Exception code: 0xc0000005
Fault offset: 0x00028ada
Faulting process id: 0x3644
Faulting application start time: 0x01cc367c5f8cd8b8
Faulting application path: C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win32_x86\crw32.exe
Faulting module path: C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win32_x86\crw32.exe
Report Id: a1c2265e-a26f-11e0-b215-842b2b4c199eGet Windows Live Mail to create your own photo e-mails

Hi,
Thanks for your reply. I followed the other link and it didn't help my current situation.
Is there a link for paid support .. all I need to do is the following for a client:
1) Install Crystal report 2011 on a Microsoft 2008 Server R2.. my error message is above.
Resolve the error on start up of Crystal reports..
It's already been over 1 week .. and I can't seem to get a live person on SAP that can help me... once this is resolved I think I will be ok.
I have CR XI on running on another server with no issues.. I don't know if the above is due to a service pack issue, security issue on installation, ... its a production server so I just want to resolve this quick.
Any help you can give me on getting alive person that I can talk to will be greatly appreciated.
Thank you.
Edited by: Mitsuokbs on Jul 1, 2011 10:38 AM

Merge files or redist installer for Crystal Reports 2011

I cannot find packages for merge files or installer for the redistribution files for Crystal Reports 2011. I have found them only for older versions. In the download section there is somewhere a hint that they are at a different position but no information where.
Can anyone help me?
Thank you
Arne Ortlinghaus

Hi Don,
thank you. It is ok using the files you indicated me. But there are still some doubts.
What does happen on a machine where a designer 2011 (internal version 14) is installed and an application that uses the dlls for Visual Studio 2010 (internal version 13). Does this work without problems?
In a readme for the redistributables for Visual Studio 2010 I have found the following text which I cannot interprete:
If you have installed Crystal Reports 2011 or any of the SAP BusinessObjects XI 4.0 products,
you may notice that their installation contains the same "Crystal Reports 2011" and "SAP
BusinessObjects Enterprise XI 4.0" folders as you see in this folder. Please note that the
folder/files names may be the same but most files have a different version, and are not
compatible with the Crystal Reports 2011 or SAP BusinessObjects XI 4.0 products.
Currently we want to upgrade our programs from Crystal Reports 9 to 2011 and we have many installations where for one machine the Crystal Reports Designer is needed together with our applications.
Arne Ortlinghaus

Cannot install Crystal Reports 2011

I tried to install Crystal Reports 2011. I followed the steps suggested by a SAP contact person and when I tried to run set up file, I am getting the following error: Install cannot proceed, Unalbe to install a product with a higher version over a product at a lower version Please use the appropriate patch...............

Has anyone managed to work this out. I am getting this also. Seems I cannot install sp2 or higher because of this message.

Crystal Reports 2011 Upgrade edition not installing

Hi, I bought Crystal 2011 upgrade on Friday and have been trying to install it. It seems to complete the installation but in the end I get this error message after clicking on Finish button.
Missing installdir reg key for installiverse, required for uninstall.
Key: SOFTWARE\SAP BusinessObjects\Suite XI 4.0\Installer\aurora
Value: Path
Checking the Crystal Directory under Program Files showing only Chart Support subdirectory.
Need some help with this issue.

1. Download the latest version of the installation package for Crystal Reports 2011. To verify the version of extracted package, open productid.txt file located at: {installation package}\DATA_UNITS\CrystalReports\.
Make sure it is not less than 14.0.2...
2. Where to download Crystal Reports 2011 installation from: - free trial from SAP Online shop http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx - from SDN Community page http://service.sap.com/sap/bc/bsp/spn/bobj_download/main.htm - from Service Market Place http://service.sap.com/sbop-downloads Note: downloads from all above listed locations are fully functional product installations. Trial version defined by expiring key code, not by functionality limitations.
3. Copy the installation package to a hard drive if possible to avoid any networking issues.
4. Login to the machine as Local ADMINISTRATOR.
5. Temporary disable any kind of firewall, antivirus, network security etc., if possible.
6. On the latest versions of Windows, even if logged in as local Administrator, right-click the setup.exe and select "Run as Administrator". If do not have Administrator account, right click "Run as" Select current user and uncheck the "Protect my computer and data from unauthorized program activity".
7. Make sure there is enough space on the computer. If not sure about the space, run "Custom" installation with minimum components. Non-mandatory components could be added at any time.
8. Finally, if there is an existing "InstallData" folder under C:\Program Files (x86)\SAP BusinessObjects rename it to "InstallDataOLD"

Crystal Reports 2011 cannot see Excel 2007 as an export type

I just installed/updated to cr2011. Installation went fine, and i did not get any problems. I am able to run all my previous reports, and if i makes chamges to a report and save, i do get asked "do you want to save it with the latest report format"
My version is 14.0.2.364RTM
When i click export, i do not see EXCEL 2007 or any other new types, i know are included for cr2011.
Is there anything else i need to download ? cr2011 runtimes ? or remove or configure ?
thanks

Abhilash, thank you.
I have another quick question, and if i need to open a new post i can.
I have CRD by ChristianStevenSoftware, which we use to automate and schedule/deliver our reports.
When i upgraded to cr2011, i was told by CristianSteven software, that i had to select the correct CRYSTAL RUNTIMES.
They have a gui to use for the user to "Chang Crystal Version". when i used it, i was presented with a dialog box, which
had Crystal Reports 2011(13.xx) as the latest. I slected this option as i assumed they though 13.xx was correct for 2011( i know 14.xx is what i have installed.
Anyway i did not get an error when upgrading to 13.xx, but when i started CRD, i got an error.
The CRD developer says :-
The install that is in the picture looks like the installation of the crystal reports 2011 applicaton,
not the runtimes. The runtimes should be a seperate installation, please let me know if you
see any installations under add/remove programs that is labeled:
--SAP Crystal Reports runtime engine for .NET Framework 4
That should be the name showing for the 2011 runtimes. If you cannot find it in the add/remove programs, you should be able to download the runtimes from the SAP.Com website.
I do not see SAP Crystal Reports runtime engine for .NET Framework 4
Can i download them from SAP site as he suggests ?
Thanks in advance, John

Crystal Report 2011 compatibility with dot net 1.1

Hi,
WE have a .dot net application in framework 1.1 where we were using crystal reort 9. we are now upgrading to crystal reports 2011 .
1) is crystal reports 2011 runtimes compatable with dot net 1.1
2) Where can i find the runtimes for crystal reports 2011. for this i was ealier given a Visual studio 2010 crystal reports runtime. ths file was called CRRuntime_32bit_13_0_1.msi. but when i install this it has a readme file which says the following.
If you have installed Crystal Reports 2011 or any of the SAP BusinessObjects XI 4.0 products,
you may notice that their installation contains the same "Crystal Reports 2011" and "SAP
BusinessObjects Enterprise XI 4.0" folders as you see in this folder. Please note that the
folder/files names may be the same but most files have a different version, and are not
compatible with the Crystal Reports 2011 or SAP BusinessObjects XI 4.0 products.
the way i am reading this seems that the runtime i have is not the one i want for Crystal reports 2011
Thanks
Ravinder Akkaraju

A bit of a historical review;
VS2010 came out
We created a version of CR that integrates with VS2010. This is Crystal Reports for Visual Studio 2010 (v 13.x), also refered to as CRVS2010
At a later time CR 2011 was released. This version has no SDK.
However, any report created in CR 2011 can be run with CRVS2010, as well as the CR 2008 (v. 12.x) runtime.
As CRVS2010 is for VS2010 only, and VS2010 does not support framework 1.1, CRVS2010 does not support framework 1.1
If you want to use report create in CR 2011 with framework 1.1 based application, you will need to obtain CR 2008 which will install the correct runtime.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Does Crystal Reports need to be on the web server?

Hello,
here's my scenario. someone who left us moved a .Net web application from server 1 to server 2 and didn't leave us notes of what he did. The report came up on server 2 fine but was not getting the right data so we changed the datasource to get the data correctly. Now we deployed the fixed version on server 2 and refreshed the web server. Now we see the correct results BUT the Business Objects icons (e.g. BO image, print icon, forward and back icon) are all "X" meaning that they could not be found.
We took a look at server 1 and it had the full version of Crystal Reports installed on it. On server 2 it looked like the DLLs were dumped into the GAC and that's all.
We're a bit perplexed by why it was working on server 2 with all the Business Objects icons even though Crystal Reports was not installed on it until we restarted the server with the fixed code. We were thinking maybe it's some sort of caching?? I've never seen this before so I'm a bit perplexed.
Any ideas on why this happened?
Thanks for taking a look.

Hello Jeff
Mysterious for sure. When you say;
no virtual directory to crystalreportviewers115 and Crystal reports is not installed on the server (except for seeing only a few CR Dll's)...so how the heck did he get it working
You're essentially saying something like;
The car has no wheels, no engine, yet somehow it managed to get from point A to point B.
Sorry to say, but it ain't happening...
The only way to get a project that includes CR to work is to deploy the CR runtime. Either via MSI file where a simple double click will install the runtime and configure the viewer directory under the default app pool, or via a setup project you build using the CR MSM files. Again the files will be installed and the viewer directory configured under the default app pool. If your app is under a custom app pool, you need to configure the viewer folder under that pool as the install has no idea about non default app pools. See KB [ 1547124|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533343337333133323334%7D.do] for more details re. viewer configuration.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Crystal reports 2011 failure to pull the master data for AP Items

Similar Messages

Maybe you are looking for