Crystal Reports Image box does not display images.
Post Author: xbhavesh
CA Forum: .NET
i have CR report which has a Imagebox to display images from db table. i am storing the images in a table as path. in my dev machine when i load the .aspx page with the crystal report it shows the image in the box but when i run it from the web server the image does not show.
even from the .rpt file i get the image and all data.
anyone know how can i get this working?
the images are stored in a mapped network drive and the version of cr is XI R2.
Please post to Business One forum
Similar Messages
-
Safari on my account does not display images when you open a picture.
I have Snow Leopard 10.6.8 installed. Safari on my account does not display images most of the time when you open a picture like (www.example.com/example/example.jpg or any other format). If the image does not display, I can drag from the corner, it displays the image. However, pdf does not work at all. I have to choose open in Preview to view the pdf file. I can even show the example:
Sometimes the images work like right now.
2. This is the time when the images do not work.Hi all the real problem was this...
The issue was that the wee rubber eye piece around the viewfinder had slipped out of its seat slightly and was covering the sensor for the LCD. I Just checked the rubber eye piece bit pushed right down till it clipped into place and now not obstructing the LCD sensor as the picture displays both with the LCD auto off enabled or disabled !! simple thing but a massive trap ! -
Crystal Report in InfoView is not displaying the parameter
Cheers All,
We have a Crystal Report which is connected to the BEx query. We also have parameters based on variables in BEx.
When we run the report directly from Crystal, everything is fine.
However, when we run the report from InfoView, when I click on the "..." button beside the parameter to make the selection, everything hangs up.
This (static) parameter is based on a variable which is based on a compounded characteristic 0ASSET_AFAB.
The compunding keys are :1) Company code 2) Asset 3) Sub-asset.
The user is providing the Company code in another parameter, but the user is not providing the Asset, nor the asset sub-number... so all the iterations of asset/sub-asset/depreciation area are displayed - and this works at BEx level, and it works when the report is run directly from the Crystal Reports, however this does not work when the report is run from the InfoView.
What would be the best course of action?
Regards,
DmitriyHi Rajiv,
In OIM 9.1 we are using the stored procedure to get the values for all the fields.In the stored procedure we are using the cursor to store the list of values but in the BI Publisher we are using the SQL queries to retrieve the values for the fields in the report. In sql queries we are unable to handle the list of values for the fileds like User Groups and Resources provisioned/deprovisioned.
Please let me know the process even if we can get list of values for the fields using the SQL queries. -
Settings Manager box does not display
I recently uninstalled flash player and installed the latest version. Although flash player works fine, the Settings Manager box does not display. I only have this problem on Firefox 3.6.10, it works fine on IE 8. I am running Windows XP 32 bit.
Flash10k.ocx 10.1.85.3
NPSWF32.dll 10.1.85.3
I have tried uninstalling, rebooting, reinstalling. I have also tried disabling AV and firewall.
Although I cannot see the SM box, I can right click on the white space to access the local settings. Turning off hardware accelleration did not help.
I have also checked for updated display drivers, none available.I can't really help, just want you to know you're not the only one with this problem. Just saw another thread with the same.. and well.. got the problem here as well.
-
I use (hope to) PS CC in combo with LR and Windows 8. When I select right click in LR and edit in PS CC, PS loads but does not display the image. If I look in PS under recently opened files, the file imported from LR shows. If I initiate the opening of the file from PS, it does not display. If I initiate the opening of any image file from CC, it does not display. What is the problem and how do I work around it??? Thank you.
Update your video card driver from the GPU maker's website. If you can't update the driver for some reason, then turn off the GPU features in Photoshop's preferences until you can get a working version of your video card driver.
-
Text box does not display the date??
I have a text box <input type="TEXT" name="invoiceDate" readonly></input>. I select the date using datepicker .The date gets displayed in the text box.Then i click on "Show" button which loads the same jsp page again.
When the page is loaded the text box does not show the date.
I try to save the date in the text box as
<% String date1=request.getParameter("invoiceDate");
<input type="hidden" name="date1" value="<%=date1 %>">
<%>
The value is saved in this hidden variable..
Plz help me what to do next
ThanksIts a hidden field and that's why it isnt displayed.
Use
<input type="text" name="date1" value="<%=date1 %>"> ram. -
On resize of report, some data does not display in full
I have to modify a standard report, so I adjust the main section width from 11 t0 14, and the report width from 132 to 142. I compiled the report and run it. I noticed that some items does not display in full, even the text item header.
ex:
prev after modif
1234.45 123
Fname Fnam
Account Accou
At design mode, I can see that the space is enough for the item to display its full value. Anybody knows to deal with this?
this report is run thru oracle apps.treehuggerinny wrote:
> This the the search result screen:
>
http://67.199.64.241/consumers/srchresult.asp?gender=either&searchword=&zip=&fir
> stname=&LastName=&go=Search
>
> If you choose Herrmann, there should be narratives.
>
> Any thoughts would be most appreciated!!!
I see that you're using ASP, if the fields in question are
memo fields in Access or nText fields in SQL server, then it's
possible that the following tech note may help out:
http://www.webassist.com/media/professional/support/technotes/10009.pdf
Or you may need to specify all of your columns (not SELECT *
) and manually move the memo/ntext fields to the end of the list of
fields.
Danilo Celic
|
http://blog.extensioneering.com/
| WebAssist Extensioneer
| Adobe Community Expert -
My search box does not show suggestions although it is set to show suggestions.
MMS is a carrier issue... contact Verizon and ensure your account is provisioned correctly. I would think that someone would be intelligent enough to do that before buying a new device, but......
iMessage could be an activation issue or a network issue.
Have you tried Settings > General > Reset > Reset Network Settings?
Does iMessage work consistently on Wi-Fi? -
In the new version of Adobe Flash Player 11.5.502.110 the images are not displayed. In previous versions they are displayed. Tested on several computers. This is not a local problem. This is a problem of Adobe. The bad news is that the early versions are very hard to find and reinstall it.
Many different systems tested. And all browsers.
Now there is no big image.
Example:
http://www.deluxedecor.ru/blog/dvorec_san_susi_letnjaja_rezidencija_fridrikha_velikogo_rok oko/2012-11-01-12
http://www.deluxedecor.ru/index/kollekcija_lepniny_barokko_ehrmitazh/0-45
http://www.deluxedecor.ru/index/karnizy/0-12
and many others.....hi i have noticed the same problem. also with Chrome and FP ver 11.5.31.2and Firefox and Safari with FP 11.5.502.110
it seems that MovieClipLoader class not returning onLoadInit event. I use to add a fadein function on loadInit to fade in the loaded images. with the latest Flash PLayer versions this is not activated so you cannot see the loaded images.
I have tested this on 3 different systems and the problem is the same. I have not updated my FP for IE. There, the older FP still works well.
test systems
Mac OS LionSafari and FP 11.5.502.110 --- DOES NOT WORK WELL
Windows 7 64 bit
chrome 23.0.1271.95 with FP 11.5.31.2 - DOES NOT WORK WELL
Firefox 16.02 with FP 11.5.502.110 - DOES NOT WORK WELL
IE 9 with FP version 11.4.402.287 - WORKS
Windows XP SP3
Firefox 16.02 with FP 11.5.502.110 - DOES NOT WORK WELL
IE 8 wth FP 11.4.402.287 - WORKS
chrome 23.0.1271.95 with FP 11.5.31.2 - DOES NOT WORK WELL -
My 8530 does not display images in the browser
My bb 8530 a few weeks ago suddenly stopped displaying images in the browser. Browser options are set to "display images". I've power cycled many times, even reset and wiped, but still no images in browser. How can I fix this? Thanks.
hi i have noticed the same problem. also with Chrome and FP ver 11.5.31.2and Firefox and Safari with FP 11.5.502.110
it seems that MovieClipLoader class not returning onLoadInit event. I use to add a fadein function on loadInit to fade in the loaded images. with the latest Flash PLayer versions this is not activated so you cannot see the loaded images.
I have tested this on 3 different systems and the problem is the same. I have not updated my FP for IE. There, the older FP still works well.
test systems
Mac OS LionSafari and FP 11.5.502.110 --- DOES NOT WORK WELL
Windows 7 64 bit
chrome 23.0.1271.95 with FP 11.5.31.2 - DOES NOT WORK WELL
Firefox 16.02 with FP 11.5.502.110 - DOES NOT WORK WELL
IE 9 with FP version 11.4.402.287 - WORKS
Windows XP SP3
Firefox 16.02 with FP 11.5.502.110 - DOES NOT WORK WELL
IE 8 wth FP 11.4.402.287 - WORKS
chrome 23.0.1271.95 with FP 11.5.31.2 - DOES NOT WORK WELL -
Thunderbird does not display images in messages
I've done the recommendation for changing mailnews.message_display.disable_remote_image to "user set" "boolean" and "false" but still don't get images. I'm using Thunderbird 24.3.0, and use Firefox 28.0 as my default browser. I can't find anything else in help or options or tools that addresses this. This happened recently, I used to always either get the images or the choice box for downloading remote images, but don't get that anymore either. Should I download and re-install Thunderbird? If so, how do I ensure that my saved messages and address book is saved intact?
Thank you,
Jerry Larsen
[email protected]hi i have noticed the same problem. also with Chrome and FP ver 11.5.31.2and Firefox and Safari with FP 11.5.502.110
it seems that MovieClipLoader class not returning onLoadInit event. I use to add a fadein function on loadInit to fade in the loaded images. with the latest Flash PLayer versions this is not activated so you cannot see the loaded images.
I have tested this on 3 different systems and the problem is the same. I have not updated my FP for IE. There, the older FP still works well.
test systems
Mac OS LionSafari and FP 11.5.502.110 --- DOES NOT WORK WELL
Windows 7 64 bit
chrome 23.0.1271.95 with FP 11.5.31.2 - DOES NOT WORK WELL
Firefox 16.02 with FP 11.5.502.110 - DOES NOT WORK WELL
IE 9 with FP version 11.4.402.287 - WORKS
Windows XP SP3
Firefox 16.02 with FP 11.5.502.110 - DOES NOT WORK WELL
IE 8 wth FP 11.4.402.287 - WORKS
chrome 23.0.1271.95 with FP 11.5.31.2 - DOES NOT WORK WELL -
I am using the vision software, Labview 2011 windows XP with a USB wbcam. I use the WebCam to test the software, create an installation file, and run it on a different machine. This machine has an IEEE 1394 Basler camera.
The program seems to work without any problem with the run-time system. On the USB system, the image never displays properly if I have a property node to read information from the camera. If I remove it, it works just like the IEEE 1394 camera.
The enclosed VI seems to demonstrate the problem. If you run it as is, it will not display the image. If you stop the program and set the property node to false, it will display the image properly.
Solved!
Go to Solution.
Attachments:
Bare_Design.vi 45 KBThe USB webcam seems to update the VideoMode to value of 4 (0 before). FrameInterval stays 0.
No errors appear during the run. When you terminate, the following errors appears.
The firewire camera, Bassler does not have the problem. It is the USB webcam that has this issue.
Attachments:
Bard_Design.jpg 15 KB -
Safari does not display images
Yesterday - suddenly- Safari stopped displaying images on any web page. Fo example on Apple.com the picture of the large Apple does not come up and so on. Should I re-install Safari- download again? Just to check the images DO display in Explorer which I had to use to post this.
thank you.
j
G5 and 17 inch pb and 12 inch pb Mac OS X (10.4.8)I had exactly the same trouble. I followed these instructions--emptied the cache and ditched the plist file, and when I restarted, they were all there again. I've been suffering with no images for a long time--I wish I would have done this sooner--it was easy!
Movable flat-screen iMac G4 Mac OS X (10.4.9) 1.25Ghz processor, 256 MB memory (DDR SDRAM) -
Oracle Enterprise Manager does not displaying images
Hi folks, I installed Oracle SOA Suite 10.1.3.0 and after that I did apllied patch 10.1.3.4. The patch was applied successfully, but when I invoke Enterprise Manager all images does not rendered. After analisying I could see that "ascontrol" application has two virtual-path pointing two real-path but it does not exists into file system. Enterprise MAnager console does not load CSS file and images because it.
I download OC4J 10.1.3.4 standalone version and after configuration I access Enterprise Manager via browser, but OC4J standalone works fine.
Anyone can help me ???
Cheers.The listener port may be misconfigured,
You can reconfigure with
emca -config dbcontrol db
Enter the following information:
Database SID: XXX
Database Control is already configured for the database XXX
You have chosen to configure Database Control for managing the database XXX
This will remove the existing configuration and the default settings and perform a fresh configuration
Do you wish to continue? [yes(Y)/no(N)]: Y
Listener port number: 1521
Password for SYS user:
Password for DBSNMP user:
Password for SYSMAN user:
Email address for notifications (optional):
Outgoing Mail (SMTP) server for notifications (optional):
You have specified the following settings
Database ORACLE_HOME ................ /oracle/product/10.2.0
Database hostname ................ xxxxx
Listener port number ................ 1521
Database SID ................ XXX
Email address for notifications ...............
Outgoing Mail (SMTP) server for notifications ...............
Do you wish to continue? [yes(Y)/no(N)]: y
24.08.2008 01:58:44 oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at /oracle/product/10.2.0/cfgtoollogs/emca/EPA/emca_2008-08-24_01-58-01-AM.log.
24.08.2008 01:58:46 oracle.sysman.emcp.util.DBControlUtil stopOMS
INFO: Stopping Database Control (this may take a while) ...
24.08.2008 01:58:57 oracle.sysman.emcp.util.DBControlUtil startOMS
INFO: Starting Database Control (this may take a while) ...
24.08.2008 02:00:39 oracle.sysman.emcp.EMDBPostConfig performConfiguration
INFO: Database Control started successfully
24.08.2008 02:00:39 oracle.sysman.emcp.EMDBPostConfig performConfiguration
INFO: >>>>>>>>>>> The Database Control URL is http://xxxxx:1158/em <<<<<<<<<<<
Enterprise Manager configuration completed successfully
FINISHED EMCA at 24.08.2008 02:00:39 -
Movieclips loader loads png but does not display image in ie
hello, i have created a static class to deal with the loading
of images, it works great. yesterday, i found an issue: i try to
load png files (those pngs are generated with quasimondo's bitmap
exporter), they do load, but they are not displayed in ie.
it worked until recently. is there some specification about
the png that i have to make sure that the png has? or is there an
issue using the movieclip loader with ie?
i included the actionscript class (save the code in an .as
file), so if you want to test, write only this in the first frame
of your code:
import com.iCongo.utils.MovieClips;
this.createEmptyMovieClip ("placeholder",
this.getNextHighestDepth ());
MovieClips.loadIMG (this.placeholder, "
http://somedomain.com/somepng.png");
that image will load, but in the context of my flash file
where many many files are loaded at the same time, only the block
generated by the bitmap exporter will not show.OOPS
cancel that question. i ftp'd the file to the server again, this time setting the transfer type to binary and the png image comes up
just like it should.
john
Maybe you are looking for
-
SQL QUERY updateable report with APEX_ITEM fields to update hidden columns
Here is my SQL query: select "EMPLOYEE_ID", "PUBLICATION_ID", "TITLE", '<NOBR>1. ' || APEX_ITEM.TEXT(101,CODE1,2,3) || ' ' || APEX_ITEM.TEXT(102,CODE1_PCT,2,3) || ' %</NOBR><BR>' || '<NOBR>2. ' || APEX_ITEM.TEXT(103,CODE2,2,3) || ' ' || APEX_ITEM.T
-
Updating item text in the outbound delivery
Hi I have a outbound delivery in the system . I want to update some text in the "item text" through a program. how do i do this. sample code would be great. thanks sankar
-
SQL Server 2012 SP 2 with SharePoint 2010
Can SP2 for SQL Server 2012 be installed in an SharePoint 2010 Farm? If so, does SP 2010 need to be at a specific CU/SP? I can't find anything about this specific combination. Dean MCTS-SQL 2005 Business Intelligence, MCITP SharePoint 2010
-
Chinese characters into Motion
Hi all, I need to import Chinese characters into a Motion project I'm doing. Can anyone help with this. I can't find a way to import the Chinese character set which comes with Apple OS. Thanks in advance, M
-
Dear Gurus, Issue: SC approved while IPC server was down. PO not generated. SC stacked in the status u201CI1111u201D-Item in transfer process- Alert message appears under LOCAL error Actions taken: Not able to delete via