Crystal Reports XI R2 SP2 on Windows Server 2008 ( 32 bit system)

Hi Forum,
I am trying to run a .NET application on a windows server 2008( 32 bit system) with Crystal Reports X1 R2 SP2 installed.
The application does not run and throws the following error in the event log.
Faulting application w3wp.exe, version 7.0.6002.18005, time stamp 0x49e023cf, faulting module unknown, version 0.0.0.0, time stamp 0x00000000, exception code 0xc0000005, fault offset 0x0171ab98, process id 0x%9, application start time 0x%10.
The same application runs fine on a windows server 2003.Also, the same application runs fine, when i remove the crystal reports code. It loads the .NET pages fine.
Please suggest me if i am missing something. Please let me know how can i debug this issue?

Hello,
Crystal reports XIR2 is not supported on Windows server 2008.
Check the supporting platforms guide here.
[Crystal Reports XI Release 2 SP2 - Supported Platform Info|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/7081b21c-911e-2b10-678e-fe062159b453]
Thanks,
Bhushan.

Similar Messages

Having problem to install Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit

Dear All Precious Friends,
I am having problem while installing Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit,
I have already installed Oracle Database 11g Release 2 -------
----Then i configured JAVA Access bridge
--------then installed and configured Required Schema using Repository Creation Utility of same version of Database 11g,
-----------then installed Oracle Business Intelligence 11g version 11.1.1.6.0 which includes Web logic..............I am feeling that i did right at this point...........
..............also feeling comfortable after install Oracle Identity and Access Management 11g ..................
-----------------but don't know how to configure OID to install Oracle Portal Forms Reports and Discoverer 11g...............
Please help my Oracle Friends
Your early help will be highly appreciated.
thanks and regards
Hassan

You said, "...+I would like to install Release 2(11.1.1.2.0)+ ...". Be careful. 11.1.1.2.0 is not Release 2. The version for Rel 2 is 11.1.2.0, notice that there is one less "1". Also, there is no way to patch from Release 1 to Release 2.
In EDelivery, this is what you should find if you search on "Oracle Fusion Middleware" for "Microsoft Windows x64 (64-bit)":
First look for this link then drill into it:
Oracle Fusion Middleware 11g Media Pack for Microsoft Windows x64 (64-bit)
In this section you will find the following:
This is the full product installation of FMw 11 Release 2 (Forms & Reports)
Oracle Forms and Reports 11g R2 (11.1.2.0.0) for Microsoft Windows x64 (64-bit) V28761-01
This is the full product installation of FMw 11 Release 1 (includes Portal, Forms, Reports, and Disco)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 1 of 4) V18785-01
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 2 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 3 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 4 of 4)
This is the FMw 11 Release 1 patch set that will bring the above 11.1.1.2.0 installation to 11.1.1.6. This is NOT a full product installation - just a patch
Oracle Portal, Forms, Reports and Discoverer 11g Patch Set 5 (11.1.1.6.0) for Microsoft Windows x86 (64-bit) V29850-01
There are no patch sets for Release 2 as of yet.

What Drivers should I use to access SQL Server 2005 SP2 from Windows Server 2008 64 bit

and yes I do know that is an odd scenario so let me explain
I have just joined a project that is "in flight" where the customer is upgrading a LOT of things at the same time
(some Microsoft, some other supplier: some at the OS level, others at server or services levels)
the current step is replacing some services leaving the back end databases as they are
i.e. SQL Server 2005 SP2
a later step will upgrade the backend data bases which may make more work
What we have now runs on Windows Server 2003 32 bit using the OLEDB drivers
version 2000.86.3959.00
What we want must run on Windows Server 2008 64 bit still using the OLEDB option
which version should I download & try to install?

Here are a known list of issues with this configuration with their corresponding workarounds: https://support.microsoft.com/kb/936302/en-us
Satish Kartan www.sqlfood.com

Deploying Crystal Reports (CR for VS2010) to Windows Server 2008

What do I need to deploy an ASP.NET web application built in VS2010 (.NET 4.0) to Windows Server 2008 Standard?
One by one I've been fixing this issue and then that issue, trying to get this app deployed to our server. The latest issue is an event in the server's Application log. The part that has me most concerned is "The keycode assembly, BusinessObjects.Licensing.KeycodeDecoder.dll, cannot be loaded."
Does this message mean we can't use the free runtime on our server? If yes, what do I need to purchase? And, is there a trial version I can test this with before spending more money?
I installed "CRforVS_13_0" on my workstation and switched the assembly references from 14.0.2 to 13.0.2. I also installed the "CRforVS_redist_install_32bit_13_0" on the server. BTW, where is the runtime for the 14.0.2 assemblies?
The assembly version in the above is 13.0.2. This is confirmed by looking in the GAC on the server and the local dev machine. However, the developer's guide (crnet_dg_2010_en.chm) says the version should be 14.0.2. Which version should I use? I can't find the runtime for 14.0.2 so I'm using the older 13.0.2 version.
Thanks!
Edited by: scottw on Feb 11, 2011 8:06 PM

Eeeek.
The 1st thing you want to do is clean up your dev box and get rid of any sniff of CRVS2010 Beta (14.x). See KB [1535325 - How to remove CRVS2010 Beta 2|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533333335333333323335%7D.do] (hoping this is Beta 2 not Beta 1).
Once you have re-installed crvs2010 rtm from here:
http://www.businessobjects.com/jump/xi/crvs2010/us2_default.asp
Make sure the only CR references in your project are of version 13.x. Recompile the app, then you can use either the msm or msi to deploy the CR runtime.
MSM http://downloads.businessobjects.com/akdlm/cr4vs2010/CRforVS_mergemodules_13_0.zip
MSI 32 bit http://downloads.businessobjects.com/akdlm/cr4vs2010/CRforVS_redist_install_32bit_13_0.zip
MSI 64 bit http://downloads.businessobjects.com/akdlm/cr4vs2010/CRforVS_redist_install_64bit_13_0.zip
Re. the keycodedecoder warning. This is a known issue and does not impact your or any other project. This will be resolved in SP 1 for CRVS2010.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]
Edited by: Ludek Uher on Feb 11, 2011 12:45 PM

Where can I download the Crystal Run Time for Windows Server 2008 64 bit ?

Hi,
Where can I download the Crystal Reports 08 RunTime for Windows Server 2008 64 bit ?
Rock
Edited by: Rock_1234 on Aug 5, 2009 9:25 AM

Thanks all for your replys.
As I know there is no Crystal Reports 2008 runtimes for 64 bit machines, there are only 32 bit runtimes for that product.So,I need to know when will be the 64 bit runtimes will be released or will be available.
Also,for the CR bundled with VS 2008 (10.5), there are 64 bit runtimes which you could find on your development machine under -
' C:\Program Files\Microsoft SDKs\Windows\v6.0A\Bootstrapper\Packages\CrystalReports10_5\CRRedist2008_x64.msi '
When will be 64 bit runtimes for CR 08 will be available?
Thanks

Auto rollback with no error when upgrading windows server 2003 sp2 to windows server 2008 R2

Hi, I have a server needs to upgrade from windows server 2003 sp2 to windows server 2008 r2.
It should be supported from technet site
And yes, it went through all the list of upgrade. After rebooted, it told me "the upgrade was not successful, Your previous version of windows is being restored. Do not restart your computer during this time.".
Is there a place located the upgrade failure log? What's the common cause about the auto roll back?

Thanks for the reply.
I copied some sentences in Setuperr.log
2014-07-10 23:58:33, Error
Failed to find driver file path. Error=00000002x[gle=0x80092004]
2014-07-10 23:58:45, Error      [0x0805e6] MIG    File 'C:\WINDOWS\SysWOW64\cpqteam.cnt' is unsigned! (Failed with error code 0x2 (2): Failed with error code 0x2 (2): Failed with )[gle=0x00000490]
2014-07-10 23:58:45, Error      [0x0805e6] MIG    File 'C:\WINDOWS\SysWOW64\cpqteam.hlp' is unsigned! (Failed with error code 0x2 (2): Failed with error code 0x2 (2): Failed with )[gle=0x00000490]
2014-07-11 00:06:19, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll,
{8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
2014-07-11 00:06:20, Error      [0x08085e] MIG    UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll]
does not exist.[gle=0x00000003]
2014-07-11 00:13:58, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll,
{743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
2014-07-11 00:18:56, Error      [0x0803db] MIG    IndirectKeyMapper: Cannot find the currently loaded location for hive X:\Documents and Settings\####\NTUSER.DAT; giving up (2).[gle=0x00000003]
2014-07-11 00:30:58, Error                 SYSPRP SPPNP: Error 0x25 (CONFIGRET) occurred while determining the buffer size needed to hold the list of devices that are using service
usbhub20.
2014-07-11 00:30:58, Error                 SYSPRP SPPNP: Error 0x424 occurred while opening a handle to the service usbhub20.[gle=0x00000424]
2014-07-11 00:38:08, Error      [0x080973] MIG    Ignoring apply for object: C:\WINDOWS\Panther\setupact.log[gle=0x000003f0]
2014-07-11 00:38:08, Error      [0x080973] MIG    Ignoring apply for object: C:\WINDOWS\Panther\setuperr.log[gle=0x000003f0]
Is it caused by driver error, MediaPlayer-DLMigPlugin.dll
and drmmgrtn.dll?

REQUIRED LINK OF SP2 FOR WINDOWS SERVER 2008 R2 STANDARD SP1.

pLEASE HELP ME TO DOWNLOAD A CORRECT SP2 FOR WINDOWS SERVER 2008 R2 STANDARD SP1.
REQUIRED LINK OF SP2 FOR WINDOWS SERVER 2008 R2 STANDARD SP1.

On Mon, 9 Mar 2015 11:34:37 +0000, AVINASHJHA wrote:
REQUIRED LINK OF SP2 FOR WINDOWS SERVER 2008 R2 STANDARD SP1.
This forum, as per the name, is only for Windows 10 Server questions.
Please repost to:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?category=windowsserver
Paul Adare - FIM CM MVP
If you have any trouble sounding condescending, find a Unix user
to show you how it's done. -- Scott Adams

Deployment issue on windows server 2008(64 bit)

Hi all,
I am using crystal reports 2008 trial version for my web application. Its working fine in development environment but when I deploy application in windows server 2008 64 bit edition it shows following error:"An error has occurred while attempting to load the Crystal Reports runtime. Either the Crystal Reports registry key permissions are insufficient, or the Crystal Reports runtime is not installed correctly. Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required."
Is there any resolution available for this problem except for changing the IIS settings for 32 bit applications?
Rgds

Read the following [article|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10d5fa88-2013-2c10-c9a5-f11963607d4e;jsessionid=(J2EE3417600)ID0244107750DB11172929121510648759End] as it goes over your issue.
Essentially you will have to set IIS to 32 bit at the least.
Jason

Problems installing OBIEE 11g on Windows Server 2008 64 bit

Hi, I'm trying to install OBIEE 11g on Windows Server 2008 64 bit (standard edition, SP2), and it's blowing up running the installer. The installer gets past the first couple of "info" screens, but blows up prior to coming to the first "real" screen with an error:
Microsoft Visual C++ Assertion Failed:
Program: ...
File: ../../../src/share/native/sun/font/t2k/t2kstrm.c
Line: 132
Expression: pos <= t->maxPos
Has anyone seen this and/or have an idea how to work around this? Note that I did do the prerequisite download / install of the 2005 Visual C++ 64 bit libraries.
Thanks,
Scott

Just to close the loop on this thread, this does indeed seem to be some sort of font / java issue on our servers. I've been completely unable to get the install to work using the GUI. However, if I run it from command line using the -silent and -response paramaters along with a proper response file, the install went perfectly. I'm going to continue working the SR with Oracle - don't want to be stuck using -silent mode when things get more complicated, but at least now I can move forward.
If anyone else has a better workaround - please let me know. "Silent" mode is workable, but difficult and time consuming.
Thanks,
Scott

Unable to change password while first logon on windows server 2008 R2 SP1 system

Hi Team,
Ad team has created new account for me with change password on first logon setting
When I logged in on Windows Server 2008 r2 SP1 system with my new credentials I get a error message stating that
"You must change your password before logging on the first time. For assistance, conatct your system administrator or technical support"
Concern:
I do not get password change screen on first logon on the server. How should I change my password on first logon?

Hi,
I got resolution for above issue
Run ==> type "tsconfig.msc" ==> double click "RDP-TCP" ==> change security layer to
RDP Security layer ==> Apply ==> OK

Oracle 10g xe 32 bit on windows server 2008 64 bit

I have windows server 2008 64 bit and oracle 10g xe 32 bit
does it work on ?
I have tested but no success.
Any one knows reasons

You seem to have posted threads before on very similar topics, and you also posted this once in the appropriate forum:
{thread:id=2270082}
Please avoid duplicating posts!
As already stated in one of your other threads, it is not a certified combination. Again, read the Installation Guide !
If you want to play with it and try to make it "work", that's up to you. And as you say you have already tried, with "no success", it seems you already got an answer.
I suggest you close this thread and continue in the dedicated 10g XE forum thread (or try the 11g XE Beta - only for 32-bit Windows yet, but there's a chance the general release will be aimed for Windows x64 as well).
Edited by: orafad on Aug 20, 2011 1:14 PM

Oracle 10.1.0.4 on Windows Server 2008 64 bits Standard

Hello,
For migratiion purposes, we would need to install Oracle 10.1.4.0 on a Windows Server 2008 64 bits Standard, and then upgrade it to 11g.
We have forced Oracle 10.2.0.4 installation on a Windows Server 2008 64 bits Standard, but we are not sure for 10.1.0.4.
Since we don't have that software version to try it and we are looking for it, is it possible to install Oracle 10.1.4.0 on a Windows Server 2008 64 bits Standard?
Could you point me out a document that reference Oracle versions compatibilty with Windows Server 2008?
Thanks

At MOS, click on the certifications tab, then enter database in the first drop down box, and select the rdbms. Then enter the relevant info in the other boxes, and then you will see Oracle Database 10.1.0.4.0 is not certified on Microsoft Windows x64 (64-bit) 2008 R2
Certification is a little more strict than supported, but extended support ended in January. REMINDER: Premier Support for Oracle Database 10.1 ends January 2009 [ID 761713.1]
There's always lifetime support, but your case shows how useful that can be.

Oracle 11g R2 to MS Access .mdb (Windows Server 2008 64-bit) problem

I have a need to make connection from Oracle 11g R2 to MS Access database file (mdb). OS is MS Windows Server 2008 64-bit. My configuration is next:
1. I made System DNS mikeacs (using c:\windows\sys_wow6\odbcad32.exe) to my access mdb file;
2. I made initmikeacs.ora file in ora_home\hs\admin folder:
# HS init parameters
HS_FDS_CONNECT_INFO = mikeacs
HS_FDS_TRACE_LEVEL = debug
HS_FDS_SHAREABLE_NAME = c:\Windows
3. Listener.ora file is:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\Oracle\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:C:\Oracle\product\11.2.0\dbhome_1\bin\oraclr11.dll")
(SID_DESC =
(SID_NAME = mikeacs)
(ORACLE_HOME = c:\oracle\product\11.2.0\dbhome_1)
(PROGRAM = dg4odbc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = cspo02)(PORT = 1521))
4. Tnsnames.ora is:
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
MIKEACS =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=cspo02)(PORT=1521))
(CONNECT_DATA=(SID=mikeacs))
(HS=OK)
5. After this, I restarted Listener:
lsnrctl stop;
lsnrctl start;
Given feedback:
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
Start Date 20-RUJ-2010 14:47:21
Uptime 0 days 0 hr. 0 min. 3 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\Oracle\product\11.2.0\dbhome_1\network\admin\listener.ora
Listener Log File c:\oracle\diag\tnslsnr\cspo02\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=cspo02)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "mikeacs" has 1 instance(s).
Instance "mikeacs", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
6. I created db link: create public database link macs using 'MIKEACS' (connected as sysdba);
7. tnsping mikeacs:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=cspo02)(PORT=1521)) (CONNECT_DATA=(SID=mikeacs)) (HS=OK))
OK (0 msec)
Then, when I try fire query (connected as sysdba): select * from mytable@macs;
get result:
ERROR at line 1:
ORA-28513: internal error in geterogeneous remote agent
ORA-02063: preceding line from MACS;
Although, when I fire the same query, but connected as other user, get next result:
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Microsoft][ODBC Driver Manager] Data source name not found and no default
driver specified {IM002}
ORA-02063: preceding 2 lines from MACS
Where is my problem? Please help. Thanks in advance!

That's the problem. DG4ODBC on 64bit Windows is 64bit and thus it also requires a 64bit ODBC driver.
If you don't find one - maybe you can install DG4ODBC 32bi on a 32bit platform (please do NOT install it on the 64bit Windows machine) and then use this 32biit DG4ODBC with the 32bit ODBC driver.
Another option would be to purchase a commercial ODBC driver or a bridged ODBC driver.

Oracle ODBC version error on windows server 2008 64 bit

We had installed oracle 10g standard edition on windows server 2008 64 bit. After one hour use of ODBC connection, we are getting a error message like 'Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation. Provider is unable to function until these components are installed'
Find the link for error message. http://www.google.co.in/imgres?newwindow=1&biw=1600&bih=1075&tbm=isch&tbnid=zc1Vas4O9Eqj4M:&imgrefurl=http://social.tech…
Please give solution for the said issue. Thanks in advance.

SAP said it is Oracle not support windows server 2008.

Installing Oracle SOA suite 10.1.3.1.0 on windows server 2008-64 bit.

Hi,
Installing Oracle SOA suite 10.1.3.1.0 on windows server 2008-64 bit.
Getting the following exception when installing BPEL
oracle.as.install.util.ActionFailedException : java.io.FileNotFound Exception :
D:\software\bpel\bpel_oc4j\install\log.properties(The system couldnot find the specified).
at oracle.as.install.action.LogConfigAction.execution(Unknown Source)
at oracle.as.install.util.ActionQueue.run(Unknown Source)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(Unknown Source)
Caused by : java.io.FileNotFoundException : D:\software\bpel\bpel_oc4j\install\log.properties
(The system cannot find the specified file)
at java.io.FileInputStrem.open(Native Method)
at java.io.FileInputStrem.<init>(Unknown Source)
at oracle.as.install.action.LogConfigAction.execute(Unknown Source)
at oracle.as.install.util.ActionQueue.run(Unknown Source)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(Unknown Source)
In the unzipped BPEL software folder for installation there is no such file.
Have installed several Oracle SOA suite 10.3.1.0 on windows server 2003 - 32 bit using the same software.
But now am using it along with a patch- p6712338 for windows server 2008-64 bit.

If this is a production instance, you should NOT read past this sentence -- contact Oracle support to do it right.
If this is just for testing/experiments, have you tried putting an empty file at D:\software\bpel\bpel_oc4j\install\log.properties? How about putting a copy of the file from one of your "windows server 2003 - 32 bit" installations?
Good luck, Andy

Crystal Reports XI R2 SP2 on Windows Server 2008 ( 32 bit system)

Similar Messages

Maybe you are looking for