Crystal Reports XI stopped working error message on a Windows Server 2008

We recently installed Crystal Report XI in a Windows Server 2008 environment. After completed the installation as the Administrator every time that we try to execute Crystal we receive the following error message:
"Crystal Reports has stopped working"
Problem signature:
Problem Event Name: BEX
Application Name: crw32.exe
Application Version: 11.0.0.1282
Application Timestamp: 422d5c77
Fault Module Name: StackHash_1fc1
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Offset: 7ef2fbfc
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.1.7600.2.0.0.272.7
Locale ID: 1033
Additional Information 1: 1fc1
Additional Information 2: 1fc163a1c57ae45571bce37d539b233f
Additional Information 3: 2f92
Additional Information 4: 2f92817e9e63d4100e2aa48e72910a78
Any recommendation on what is causing this error?
Thanks,
Luis

Hi, did you get this working? I'm really struggling to get up and running on 2008 R2, the CMS service just refuses to connect to the database. It also looks like the database wasn't created properly during the install. I set it up on an MSDE database, and when I look at it with sql management studio the database is there but there aren't any tables or anything else
Can anyone either confirm or deny that its possible to run Crystal XI on 2008 R2?
The error I'm getting when trying to start the service is:
The root server reported an error Initialization Failure. (Reason: Unable to connect to the database using the provided connection string. Reason: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified).
I've confirmed that the ODBC connections work (both 32 bit and 64 bit) via the built in test, but Crystal for some reason isn't happy

Similar Messages

APPCRASH - "Crystal Reports has stopped working"- windows message

Hi,
I had installed Crystal reports 2008 using valid license keycode on Windows Server 2008 machine ( crystal software not registered it in Sap portal for additional support) This was used for crystal reports development in .Net for few days, After 1 month or little more , the crystal reports stopped working and when launched from Start -> Programs -> Crystal Reports 2008 displayed a windows error message " Crystal Reports has stopped working ".
Following is the details about Problem from windows message
Problem Event name: APPCRASH
Application name: crw32.exe
Application version : 12.0.0.683
Fault Module Name: x2rpclB5.dll
Exception Code : c0000005
OS Version : 6.0.6001.2.1.0.274.10
I Uninstalled and reinstalled the application with valid license keycode and registered as well, but still the error remains same when the application is started.
Kindly suggest on how to resolve this issue.

Please note that this forum is dedicated to topics related to custom application development or deployment with Crystal Reports in .Net. This includes full versions of Crystal Reports as well as those versions of Crystal Reports bundled with Microsoft Visual Studio .Net.
Reports design, Crystal Reports (exe) installation and other issues should be posted to the [Report Design forum|SAP Crystal Reports;
Now, looking up the DLL,(x2rpclB5.dll) it appears to be a Xerox printer driver(?). You mention that this started to happen recently, so the question would be; was a Xerox printer driver installed? Also, see if either uninstalling the printer driver or installing any available updates fomr Xerox will resolve the issue.
Ludek

Error - Crystal Reports has stopped working

I have downloaded the CR 2011 trial, and I am trying to open a Crystal 7 report. The strange thing is that it was opening OK before, but has now stopped opening. Some of the Crystal 7 reports I have are able to be opened, and others are not.
The error is not helpful - Crystal Reports has stopped working. Windows is checking for a solution to the problem. I have uninstalled and reinstalled the CR 2011 trial, but this has not helped.
Has anyone had a similar problem?

Thomas,
Can you create a brand new reports against those Stored Procedures?
Are the .rpt files from CR 7 still have the old "last modified" date?
What if you try a middle CR version, like install temporary CR XIR2, open and save the reports and then try to open in the latest version?
Do you know if failing reports have any external links like Linked pictures, OLE objects, etc.?
Have you ever used Process Monitor utility? It may be helpful to identify what CR is trying to do.
Vitaly.

Crystal Reports XI crashes says "Crystal Reports has stopped working"

I'm on Crystal Reports Xi release 2 sp2, with windows 7, I also have visual studio 2008 installed.
When I try to add any fields or objects to a report in crystal reports it crashes and throws up a windows generic error message that says "Crystal Reports has stopped working" There is no additional error information besides that... I've tried a number of fixes, too many to list here, but no go, and apparently calling for tech support requires me to pay more money! ack. We've already paid for the product, I just want to use it..
Does this version of crystal reports even work on windows 7? if I could get a straight answer on that it would be a start anyway...
Sorry to be snippy, I'm just frustrated!!!

Upgrading to SP6 solved the issue. I originally thought sp4 was the newest because of this page: http://resources.businessobjects.com/support/additional_downloads/service_packs/crystal_reports_en.asp
which is out of date...
Thanks for the quick fix.

Crystal Reports has stopped working

I just installed Crystal Reports 2013. I am using Windows 7. The program opens up and everything looks normal but when I open a blank report and try to create a new connection, it immediately gives me the error "Crystal Reports has stopped working" and closes me out of the program. I talked to support and they told me to uninstall and reinstall the program. I tried that but still get the same exact error. Another support rep sent me an update to try. I tried that with the same results. Can someone please help me with this?

Hi Try setting the DEP.
1) Click Start > Run, > type sysdm.cpl, and then click OK.
2) On the Advanced tab, under Performance, click Settings.
3) On the Data Execution Prevention tab, click Turn on DEP for all programs and services except those I select > then click Add to add the CRW32.exe (You need to browse to the executable file)
P.S Solution provided by AbhilashKumar

ITunes has stopped working error message on my Dell Latitude E6520 when trying to sync photos to my iPhone 3GS. Why?!

For some reason, I keep getting the "iTunes has stopped working" error message on my Dell Latitude E6520 when trying to sync photos to my iPhone 3GS. I am using Windows 7 on my 64-bit computer. iTunes will begin to optimize the photos in the folder I have directed it to (I am trying to load almost 3000 photos and videos), and it will go through optimizing all of them singularly, then get to the step where it says "optimizing" again, but does so in bigger groups. It will get to about 2000, and then the error message "iTunes has stopped working" will pop up, and say that "Windows must close the program and will search for a solution, and if it finds one, it will notify me". Why can't I sync these photos, and what can I do? Thanks so much for the help, I really appreciate it!

Same problem here! Moreover, for some reason, the pictures in my iPhone 3GS somehow have been divided into 2 folders, Photos and Medialibrary. And when I open iPhone as a folder through the explorer I can see only the Photos folder, but cannot see the Medialibrary folder which stores the photos taken before updating/upgrading the iPhone and getting separated folders!!! What the hack with all of this?!!! When I connect iPhone to PC it automatically opens iTunes and starts syncronizing it, but at the process of OPTIMIZING the photos (and according to the number of photos it shows, I see that it tries to syncronize that invisible Medialibrary folder) the process suddenly stops and error message pops out Tried the sync test, tried the button DEBUG in that pop out message, but NOTHING HELPS!!! Also, when I open the Medialibrary in my iPhone, the screen get sblack all through scrolling it down, only the video clips are shown there... >.<
So, could you, apple developers, please, explain WHAT THIS PROBLEM IS ABOUT?!!!!!! FIX IT! I am getting ****** of to spend hours at the computer and reading those lame advises which do not help at all! I have my own things to do except reading your support websites. And I payed for the product ready to use, but not a halfproduct which problems should further be solved somehow by users..

Adobe reader has stopped working error message after installing reader XI on windows 7

Adobe reader has stopped working error message when loading reader after installing reader XI on windows 7.
Does anybody know why ?

Dear Pat,
Thank you for your reply.
It is Ver. 11.0.06 for Acrobat XI
No, I can't open the Reader at all. The error message box popped up immediately when I run the Reader

Can't install iTunes 11 on Widows 8, 'iTunes has stopped working' error message

Two months ago, I bought a new computer that uses Windows 8. I was running iTunes 10.6 on it fine until today, when it crashed for some unknown reason. Every time I've tried to open it again, I kept on getting a 'iTunes has stopped working' message. I've uninstalled 10.6 and tried installing iTunes 11, but keep getting the same 'iTunes has stopped working' error message with no other details. I've tried installing it as an administrator, but got same failed results.
Any help?
Thanks, Mike

Same problem here! Moreover, for some reason, the pictures in my iPhone 3GS somehow have been divided into 2 folders, Photos and Medialibrary. And when I open iPhone as a folder through the explorer I can see only the Photos folder, but cannot see the Medialibrary folder which stores the photos taken before updating/upgrading the iPhone and getting separated folders!!! What the hack with all of this?!!! When I connect iPhone to PC it automatically opens iTunes and starts syncronizing it, but at the process of OPTIMIZING the photos (and according to the number of photos it shows, I see that it tries to syncronize that invisible Medialibrary folder) the process suddenly stops and error message pops out Tried the sync test, tried the button DEBUG in that pop out message, but NOTHING HELPS!!! Also, when I open the Medialibrary in my iPhone, the screen get sblack all through scrolling it down, only the video clips are shown there... >.<
So, could you, apple developers, please, explain WHAT THIS PROBLEM IS ABOUT?!!!!!! FIX IT! I am getting ****** of to spend hours at the computer and reading those lame advises which do not help at all! I have my own things to do except reading your support websites. And I payed for the product ready to use, but not a halfproduct which problems should further be solved somehow by users..

'Elements 11 Organizer has stopped working' Error Message

I recently upgraded from Photoshop Elements 10 to 11. Everything works great while I am using it but if I do not do anthing in Elements for 4-5 minutes I get the 'Elements 11 Organizer has stopped working' error message, the only option I have is to push the 'Close Program' button. I have been putting up with this but now I cannot do a backup due to this problem.

darryl351 wrote:
I recently upgraded from Photoshop Elements 10 to 11. Everything works great while I am using it but if I do not do anthing in Elements for 4-5 minutes I get the 'Elements 11 Organizer has stopped working' error message, the only option I have is to push the 'Close Program' button. I have been putting up with this but now I cannot do a backup due to this problem.
Hi, I've just noticed that you too were having problems with elements 11, do you have RoboForm running also on your pc? if yes, try switching it off and see how you go! if it now works close elements, go to RoboForm\options\application integration\ then add Photoshop elements application to the list. Elements and RoboForm clash for some reason. Hope this helps

ZENcast Organizer Has Stopped Working Error Message

3ZENcast Organizer Has Stopped Working Error Message+ Hi
Please could somebody give me some assistance with the following problem, I have looked through the posts but cannot find anything on this problem.
A couple of days ago I have tried to open ZENcast Organizer on my computer and got the following error message:
''Creative Zencast has stopped working. A program caused the program to stop working correctly. Windows will close the program and notify you if a solution is available'.
It would not open up ZENcast Organizer and just closed the program.
I thought there may have been a problem with the program, so I unistalled it etc. and then went to the ZENcast website where I downloaded and installed the newest version which is 2.0.0.
After restarting my computer etc, I tried to access the program but just get the same error message as above.
I am using Windows Vista Home Premium 32 and have the 32GB Zen.
Any help would be really appreciated.
Regards
Wayne

I have the same system. I am getting the same with ZenCast, although it seems to work more often when I ignore the shortcut and go through the start menu. Strange but seems to work.
Also on Creative MediaSource 5 Organizer I am getting issues with it stopping after 2 songs and giving me the same error.
I am going to try to re-install with software from the website. I had used my disk that came with my Zplus because I thought based on what I read here that it was ready to go.
Will let you know if it gets better or not.

"yahoosync has stopped working" error message

Over the past few weeks I keep getting a "yahoosync has stopped working" error message from iTunes when I try to sync my contacts with yahoo, before this it had worked fine.
I'm not sure why this is happening but I think it started when I updated my vista to service pack 2.
I have tried to repair the iTunes installation but that still has not worked, i am desperate to sync my contacts with my yahoo account again.
Im thinking of maybe un-installing iTunes then reinstalling... BUT am I going to lose all my iphones settings and apps stored on the computer then?

In my experience (others, please correct me if I'm wrong), uninstalling and re-installing iTunes does not result in any loss of 'Library' (which is where all of the other data is held).
If you're worried, backup the 'Library' (folder) before you uninstall.
You should be ok!
As the Italians say (translated): "Good Strength".....

How I can fix this error message in the Windows Server - kCGErrorFailure: No workspace dictionary?

How I can fix this error message in the Windows Server - "kCGErrorFailure: No workspace dictionary"? This occurs after every startup or restart.

You probably don't need the hard drive and optical drive specs, but here they are?
======================
Intel ICH10 AHCI:
Vendor:          Intel
Product:          ICH10 AHCI
Link Speed:          3 Gigabit
Negotiated Link Speed:          1.5 Gigabit
Description:          AHCI Version 1.20 Supported
HL-DT-ST DVD-RW GH41N:
Model:          HL-DT-ST DVD-RW GH41N
Revision:          PQ06
Serial Number:          K3D9BH92251
Native Command Queuing:          No
Detachable Drive:          No
Power Off:          No
Async Notification:          Yes
Bay Name:          Upper
HL-DT-ST DVD-RW GH41N:
Model:          HL-DT-ST DVD-RW GH41N
Revision:          PQ06
Serial Number:          K3D9BH92251
Native Command Queuing:          No
Detachable Drive:          No
Power Off:          No
Async Notification:          Yes
Bay Name:          Upper
Intel ICH10 AHCI:
Vendor:          Intel
Product:          ICH10 AHCI
Link Speed:          3 Gigabit
Description:          AHCI Version 1.20 Supported
Intel ICH10 AHCI:
Vendor:          Intel
Product:          ICH10 AHCI
Link Speed:          3 Gigabit
Negotiated Link Speed:          3 Gigabit
Description:          AHCI Version 1.20 Supported
Hitachi HDP725050GLA360:
Capacity:          500.11 GB (500,107,862,016 bytes)
Model:          Hitachi HDP725050GLA360
Revision:          GM4OA5CA
Serial Number:                GEA534RJ06E63A
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk1
Rotational Rate:          7200
Medium Type:          Rotational
Bay Name:          Bay 1
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
disk1s1:
Capacity:          209.7 MB (209,715,200 bytes)
BSD Name:          disk1s1
Content:          EFI
OSXLION:
Capacity:          499.25 GB (499,248,103,424 bytes)
Available:          192.76 GB (192,758,513,664 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk1s2
Mount Point:          /
Content:          Apple_HFS
Recovery HD:
Capacity:          650 MB (650,002,432 bytes)
BSD Name:          disk1s3
Content:          Apple_Boot
Hitachi HDP725050GLA360:
Capacity:          500.11 GB (500,107,862,016 bytes)
Model:          Hitachi HDP725050GLA360
Revision:          GM4OA5CA
Serial Number:                GEA534RJ06E63A
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk1
Rotational Rate:          7200
Medium Type:          Rotational
Bay Name:          Bay 1
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
disk1s1:
Capacity:          209.7 MB (209,715,200 bytes)
BSD Name:          disk1s1
Content:          EFI
OSXLION:
Capacity:          499.25 GB (499,248,103,424 bytes)
Available:          192.76 GB (192,758,513,664 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk1s2
Mount Point:          /
Content:          Apple_HFS
Recovery HD:
Capacity:          650 MB (650,002,432 bytes)
BSD Name:          disk1s3
Content:          Apple_Boot
Intel ICH10 AHCI:
Vendor:          Intel
Product:          ICH10 AHCI
Link Speed:          3 Gigabit
Negotiated Link Speed:          3 Gigabit
Description:          AHCI Version 1.20 Supported
WDC WD2002FYPS-02W3B0:
Capacity:          2 TB (2,000,398,934,016 bytes)
Model:          WDC WD2002FYPS-02W3B0
Revision:          04.01G01
Serial Number:               WD-WCAVY7048785
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk3
Rotational Rate:          5400
Medium Type:          Rotational
Bay Name:          Bay 2
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
disk3s1:
Capacity:          209.7 MB (209,715,200 bytes)
BSD Name:          disk3s1
Content:          EFI
BU2TB-Time:
Capacity:          2 TB (2,000,054,960,128 bytes)
Available:          1.1 TB (1,096,926,654,464 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk3s2
Mount Point:          /Volumes/BU2TB-Time
Content:          Apple_HFS
WDC WD2002FYPS-02W3B0:
Capacity:          2 TB (2,000,398,934,016 bytes)
Model:          WDC WD2002FYPS-02W3B0
Revision:          04.01G01
Serial Number:               WD-WCAVY7048785
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk3
Rotational Rate:          5400
Medium Type:          Rotational
Bay Name:          Bay 2
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
disk3s1:
Capacity:          209.7 MB (209,715,200 bytes)
BSD Name:          disk3s1
Content:          EFI
BU2TB-Time:
Capacity:          2 TB (2,000,054,960,128 bytes)
Available:          1.1 TB (1,096,926,654,464 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk3s2
Mount Point:          /Volumes/BU2TB-Time
Content:          Apple_HFS
Intel ICH10 AHCI:
Vendor:          Intel
Product:          ICH10 AHCI
Link Speed:          3 Gigabit
Negotiated Link Speed:          3 Gigabit
Description:          AHCI Version 1.20 Supported
WDC WD10EAVS-00D7B1:
Capacity:          1 TB (1,000,204,886,016 bytes)
Model:          WDC WD10EAVS-00D7B1
Revision:          01.01A01
Serial Number:               WD-WCAU43604330
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Medium Type:          Rotational
Bay Name:          Bay 3
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
disk0s1:
Capacity:          209.7 MB (209,715,200 bytes)
BSD Name:          disk0s1
Content:          EFI
Data:
Capacity:          999.86 GB (999,860,912,128 bytes)
Available:          715.55 GB (715,549,786,112 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk0s2
Mount Point:          /Volumes/Data
Content:          Apple_HFS
WDC WD10EAVS-00D7B1:
Capacity:          1 TB (1,000,204,886,016 bytes)
Model:          WDC WD10EAVS-00D7B1
Revision:          01.01A01
Serial Number:               WD-WCAU43604330
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Medium Type:          Rotational
Bay Name:          Bay 3
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
disk0s1:
Capacity:          209.7 MB (209,715,200 bytes)
BSD Name:          disk0s1
Content:          EFI
Data:
Capacity:          999.86 GB (999,860,912,128 bytes)
Available:          715.55 GB (715,549,786,112 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk0s2
Mount Point:          /Volumes/Data
Content:          Apple_HFS
Intel ICH10 AHCI:
Vendor:          Intel
Product:          ICH10 AHCI
Link Speed:          3 Gigabit
Negotiated Link Speed:          3 Gigabit
Description:          AHCI Version 1.20 Supported
WDC WD1003FBYX-01Y7B0:
Capacity:          1 TB (1,000,204,886,016 bytes)
Model:          WDC WD1003FBYX-01Y7B0
Revision:          01.01V01
Serial Number:               WD-WCAW31850957
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk2
Rotational Rate:          7200
Medium Type:          Rotational
Bay Name:          Bay 4
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
disk2s1:
Capacity:          209.7 MB (209,715,200 bytes)
BSD Name:          disk2s1
Content:          EFI
BUOSXLION:
Capacity:          999.86 GB (999,860,912,128 bytes)
Available:          697.88 GB (697,881,690,112 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk2s2
Mount Point:          /Volumes/BUOSXLION
Content:          Apple_HFS
WDC WD1003FBYX-01Y7B0:
Capacity:          1 TB (1,000,204,886,016 bytes)
Model:          WDC WD1003FBYX-01Y7B0
Revision:          01.01V01
Serial Number:               WD-WCAW31850957
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk2
Rotational Rate:          7200
Medium Type:          Rotational
Bay Name:          Bay 4
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
disk2s1:
Capacity:          209.7 MB (209,715,200 bytes)
BSD Name:          disk2s1
Content:          EFI
BUOSXLION:
Capacity:          999.86 GB (999,860,912,128 bytes)
Available:          697.88 GB (697,881,690,112 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk2s2
Mount Point:          /Volumes/BUOSXLION
Content:          Apple_HFS

Windows keeps giving me "itunes has stopped working" error message when I start itunes? How can i fix this?

After downloading the newest version, 10.6.1, whenever I open itunes I almost immediately get a "itunes has stopped working" error messsage, in which the only option is to hit the "close the program" button. Simply closing the error message closes the program as well. I am operated under windows XP with the latest updates (or so the updater tells me). It seems like its getting stuck trying to send me a new user agreement because dont you have to agree to one for every new update? It just can't seem to get past that point. I tried opening it up in safe mode but that didnt work either. Any help would be greatly appeciated.

Looks like itunes was still trying to communicate with my iphone and got confused when it couldnt find it. Found this in another post and it worked great.
Solution:
Make sure you are not connected to the internet and then open itunes. Sync your phone and then enable the internet again. Then stay connected to the internet and close your itunes and reopen it. Bam problem solved.
By WaKaDo

"Windows Explorer Has Stopped Working" Error Message Loop upon Startup of WIndows 7 Ultimate 64-bit

Ok I have a HP Touchsmart 6000 running Windows 7 Ultimate 64 bit OS. It is my 74 year old mothers computer and about 3 months ago it started acting up. First thing that happened was the internal DVD Burner started working intermitently, recognizing
her QuickBooks backup DVD files occasionally. I got her a new internal DVD burner and it worked for a while. during that time on Startup Help and Support would all of a sudden popup right away. Then recently Adobe Acrobat would
launch a PDF file about Flash and keep opening multiple instances of it. Now her new DVD doesnt work again and on startup at the windows desktop she gets an error "Windows Explorer has Stopped Working". No matter what I click the error
keeps looping. No program has been opened that causes it to crash because the error happens immediately and keeps repeating. I have tried to boot to Safe Mode, Safe Mode with Networking and have tried System Restore to no avail.
I have ran Malwarebytes Antivirus, Malwarebytes AntiExploit, AntiRootkit as well as Combofix. I have run the AntiMalware software from Microsoft and have updated all the drivers for the HP system. To no succcess.
At one point the system did load and an error came up JAN2OSD failed to start due to missing ACPI or something like that. For that brief moment Explorer stopped crashing. When I finished updating driverss though the error came back.
Please Help as she is about to cry and no one wants to make a 74 year old woman cry.:)
Thanks,
Jeff

Hi,
According to the steps you have performed, we have followed the steps mentioned in this KB article?
Error: Windows Explorer has stopped working
Hvae you tried the repair install of Windows 7? Follow the steps here:
How to Perform an In-Place Upgrade on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
Besides, if issue insists, please follow the steps below to generate a dump file:
1. Create a new folder (named New folder)under C: drive.
2. Please save the below as a .reg file, and then import it to registry, reference here:
===
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps\explorer.exe]
"DumpFolder"=hex(2):43,00,3a,00,5c,00,4e,00,65,00,77,00,20,00,66,00,6f,00,6c,\
00,64,00,65,00,72,00,00,00
"DumpCount"=dword:00000010
"DumpType"=dword:00000001
"CustomDumpFlags"=dword:00000000
===
3. After that , if Windows Explorer stops working again, please check the
C:\New folder for dump files and then upload them.
Meanwhile, please also make a contact with the manufacturer to see if we could get any further help from there.
Best regards
Michael Shao
TechNet Community Support

ITunes has stopped working error message while downloading iOS 5

I am having issues with iTunes stopping while im in the middle of the new iOS 5 download. It never fails while im just using itunes for anything except downloading the new software. Im not sure how to fix it and im hoping someone else might be able to help me out. This is what my problem report states when i open it up.
Problem Event Name:    APPCRASH
Application Name:    iTunes.exe
Application Version:    10.5.2.11
Application Timestamp:    4ee0844d
Fault Module Name:    msvcrt.dll
Fault Module Version:    7.0.6001.18000
Fault Module Timestamp:    4791a727
Exception Code:    c0000005
Exception Offset:    00009f13
OS Version:    6.0.6001.2.1.0.768.3
Locale ID:    1033
Additional Information 1:    57ac
Additional Information 2:    97b6ca588eb69f9a752c1d44acafdfa9
Additional Information 3:    9518
Additional Information 4:    0f4b683d85bb934e783b2cc9ae8a1ee3

Same problem here! Moreover, for some reason, the pictures in my iPhone 3GS somehow have been divided into 2 folders, Photos and Medialibrary. And when I open iPhone as a folder through the explorer I can see only the Photos folder, but cannot see the Medialibrary folder which stores the photos taken before updating/upgrading the iPhone and getting separated folders!!! What the hack with all of this?!!! When I connect iPhone to PC it automatically opens iTunes and starts syncronizing it, but at the process of OPTIMIZING the photos (and according to the number of photos it shows, I see that it tries to syncronize that invisible Medialibrary folder) the process suddenly stops and error message pops out Tried the sync test, tried the button DEBUG in that pop out message, but NOTHING HELPS!!! Also, when I open the Medialibrary in my iPhone, the screen get sblack all through scrolling it down, only the video clips are shown there... >.<
So, could you, apple developers, please, explain WHAT THIS PROBLEM IS ABOUT?!!!!!! FIX IT! I am getting ****** of to spend hours at the computer and reading those lame advises which do not help at all! I have my own things to do except reading your support websites. And I payed for the product ready to use, but not a halfproduct which problems should further be solved somehow by users..

Crystal Reports XI stopped working error message on a Windows Server 2008

Similar Messages

Maybe you are looking for