CS 4 is blank?

Worked on a project all week. Saved the project as three increments, A, B, and C. Did a final render of C last night, saved the file and went to bed. Today, I went to
open C so that I could export it, but the entire interface is blank. nothing!!! No preview window, no sound files on the timeline, no edits. Nada!! Then, I opened my backup, which is B, and it did the same thing. The only file that would open is A, which is two steps back from finished. What would do that? How could a file that wasn't even open be corrupted? And have I lost a weeks work? BTW, all 516 files that I used are still in the project window, and Premiere says all the files are loaded, but there's nothing to export.

Hi Ann,
Thanks for your reply. Honestly, I don't think that I did that. I certainly didn't know that I could do that, since I'm fairly new to CS4. But it could have been done by mistake, and it would explain why the project was gone. But would that also affect the other project that wasn't even open? Just wondering.

Similar Messages

  • Adobe cloud - opens to blank white window

    just downloaded the adobe cloud for the first time.  30 day trial opens to blank white screen everytime, I can't try any programs.  Thanks

    I have the same issue.
    Downloaded and installed CC ok.
    Start CC and all I get is the CC banner at top of screen with cog symbol.
    Rest of screen is white, blue circle goes round and round for few seconds while loading then disappears.
    The only options when click on cog is Help, Pin to Notification area & Quit.
    Have tried running as admin - no good.
    Have tried renaming odm.db to odb_old.db - no good.
    this is on desktop.
    i signed up for the PS & LR package.

  • Converting null and blank to NA in a column of a database table

    Hi
    This is a simple thing but is giving me a hard time. I need to change the values coming as null or blank to NA . The values comes in a flat file as a source and I need to laod it convertign to NA in database. I wrote the expression as
    ISNULL([NPS Rating]) ? "NA" : [NPS Rating] in a derived column  and checked the box " retain null values from source as null values in data flow:
    However it is not working instead giving the error as : Truncation may occur due to inserting data from dataflow column from  column name" with a length of ...........
    Can any help me to sort out this problem. Am I writing the correct expression?
    Thank you so much for your help in advance.
    Kind regards
    Rama

    In your conditional result force it to the same length and type and make sure it is long enough, e.g.
    ISNULL([NPS Rating])==TRUE ? (DT_WSTR,256)"NA" : (DT_WSTR, 256)[NPS
    Rating]
    and if the data comes from a flat file, the test will most likely need to test for zero length string too, or trim spaces and then test for zero length.
    LEN(TRIM([NPS Rating])) == 0 || ISNULL...
    Jan D'Hondt - SQL server BI development

  • When i login to a website, it loads then gives me a blank page ?

    I can view a page regularly, like everything is normal until i go to log in. I get a blank page as soon as the page loads, and this happens to many websites. Ive tried searching in safemode, editing my firewall settings, removing cookies, disabling plug-ins, clearing history/cache, but i've had no luck so far. Anyone have any solutions ?
    I notice that every page i load includes ".php" in the URL bar.
    Thanks in advance

    Hello,
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • New Install - startx results in blank screen with mouse cursor

    I installed Arch on my desktop last week with no issues, so I wanted to install it on an old THinkpad R31. Everything with the installation went smooth, but when I try to 'startx' all I get is a blank screen with a mouse cursor that I can move around. I've installed xorg-xinit, xorg-twm, xorg-xclock, and xterm.
    I'm not getting any significant errors in the logs, or even the terminal I issue 'startx' in.
    I'm not sure what the problem could be...
    Here is my output from 'startx'
    X.Org X Server 1.13.0
    Release Date: 2012-09-05
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.6.0-1-ARCH i686
    Current Operating System: Linux x_00294-ibc 3.5.6-1-ARCH #1 SMP PREEMPT Sun Oct 7 19:33:50 CEST 2012 i686
    Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=ec6a9a60-8d8c-4de0-960b-9e2a044d0ca5 ro quiet
    Build Date: 05 October 2012 02:01:30PM
    Current version of pixman: 0.26.2
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 13 09:26:12 2012
    (==) Using config directory: "/etc/X11/xorg.conf.d"
    Initializing built-in extension Generic Event Extension
    Initializing built-in extension SHAPE
    Initializing built-in extension MIT-SHM
    Initializing built-in extension XInputExtension
    Initializing built-in extension XTEST
    Initializing built-in extension BIG-REQUESTS
    Initializing built-in extension SYNC
    Initializing built-in extension XKEYBOARD
    Initializing built-in extension XC-MISC
    Initializing built-in extension SECURITY
    Initializing built-in extension XINERAMA
    Initializing built-in extension XFIXES
    Initializing built-in extension RENDER
    Initializing built-in extension RANDR
    Initializing built-in extension COMPOSITE
    Initializing built-in extension DAMAGE
    Initializing built-in extension MIT-SCREEN-SAVER
    Initializing built-in extension DOUBLE-BUFFER
    Initializing built-in extension RECORD
    Initializing built-in extension DPMS
    Initializing built-in extension X-Resource
    Initializing built-in extension XVideo
    Initializing built-in extension XVideo-MotionCompensation
    Initializing built-in extension XFree86-VidModeExtension
    Initializing built-in extension XFree86-DGA
    Initializing built-in extension XFree86-DRI
    Initializing built-in extension DRI2
    Loading extension GLX
    xinit: connection to X server lost
    waiting for X server to shut down XIO: fatal IO error 0 (Success) on X server ":0"
    after 554 requests (554 known processed) with 0 events remaining.
    xterm: fatal IO error 11 (Resource temporarily unavailable) or KillClient on X server ":0"
    xterm: fatal IO error 11 (Resource temporarily unavailable) or KillClient on X server ":0"
    xterm: fatal IO error 11 (Resource temporarily unavailable) or KillClient on X server ":0"
    Server terminated successfully (0). Closing log file.
    xinit: unexpected signal 2
    And my Xorg.0.log
    [ 4955.478]
    X.Org X Server 1.13.0
    Release Date: 2012-09-05
    [ 4955.479] X Protocol Version 11, Revision 0
    [ 4955.479] Build Operating System: Linux 3.6.0-1-ARCH i686
    [ 4955.479] Current Operating System: Linux x_00294-ibc 3.5.6-1-ARCH #1 SMP PREEMPT Sun Oct 7 19:33:50 CEST 2012 i686
    [ 4955.479] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=ec6a9a60-8d8c-4de0-960b-9e2a044d0ca5 ro quiet
    [ 4955.479] Build Date: 05 October 2012 02:01:30PM
    [ 4955.479]
    [ 4955.479] Current version of pixman: 0.26.2
    [ 4955.479] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 4955.479] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 4955.480] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 13 09:26:12 2012
    [ 4955.480] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 4955.480] (==) No Layout section. Using the first Screen section.
    [ 4955.480] (==) No screen section available. Using defaults.
    [ 4955.480] (**) |-->Screen "Default Screen Section" (0)
    [ 4955.480] (**) | |-->Monitor "<default monitor>"
    [ 4955.481] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 4955.481] (==) Automatically adding devices
    [ 4955.481] (==) Automatically enabling devices
    [ 4955.481] (==) Automatically adding GPU devices
    [ 4955.481] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
    [ 4955.481] Entry deleted from font path.
    [ 4955.481] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 4955.481] Entry deleted from font path.
    [ 4955.481] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 4955.481] Entry deleted from font path.
    [ 4955.481] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 4955.481] Entry deleted from font path.
    [ 4955.481] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 4955.481] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 4955.481] Entry deleted from font path.
    [ 4955.481] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 4955.481] (==) FontPath set to:
    /usr/share/fonts/misc/
    [ 4955.481] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 4955.481] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 4955.481] (II) Loader magic: 0x825a620
    [ 4955.482] (II) Module ABI versions:
    [ 4955.482] X.Org ANSI C Emulation: 0.4
    [ 4955.482] X.Org Video Driver: 13.0
    [ 4955.482] X.Org XInput driver : 18.0
    [ 4955.482] X.Org Server Extension : 7.0
    [ 4955.484] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 4955.486] (--) PCI:*(0:0:2:0) 8086:3577:1014:0505 rev 4, Mem @ 0x98000000/134217728, 0x90100000/524288
    [ 4955.486] (--) PCI: (0:0:2:1) 8086:3577:1014:0505 rev 0, Mem @ 0x88000000/134217728, 0x80200000/524288
    [ 4955.486] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 4955.486] Initializing built-in extension Generic Event Extension
    [ 4955.486] Initializing built-in extension SHAPE
    [ 4955.486] Initializing built-in extension MIT-SHM
    [ 4955.486] Initializing built-in extension XInputExtension
    [ 4955.486] Initializing built-in extension XTEST
    [ 4955.486] Initializing built-in extension BIG-REQUESTS
    [ 4955.486] Initializing built-in extension SYNC
    [ 4955.487] Initializing built-in extension XKEYBOARD
    [ 4955.487] Initializing built-in extension XC-MISC
    [ 4955.487] Initializing built-in extension SECURITY
    [ 4955.487] Initializing built-in extension XINERAMA
    [ 4955.487] Initializing built-in extension XFIXES
    [ 4955.487] Initializing built-in extension RENDER
    [ 4955.487] Initializing built-in extension RANDR
    [ 4955.487] Initializing built-in extension COMPOSITE
    [ 4955.487] Initializing built-in extension DAMAGE
    [ 4955.487] Initializing built-in extension MIT-SCREEN-SAVER
    [ 4955.487] Initializing built-in extension DOUBLE-BUFFER
    [ 4955.487] Initializing built-in extension RECORD
    [ 4955.487] Initializing built-in extension DPMS
    [ 4955.487] Initializing built-in extension X-Resource
    [ 4955.487] Initializing built-in extension XVideo
    [ 4955.487] Initializing built-in extension XVideo-MotionCompensation
    [ 4955.487] Initializing built-in extension XFree86-VidModeExtension
    [ 4955.487] Initializing built-in extension XFree86-DGA
    [ 4955.487] Initializing built-in extension XFree86-DRI
    [ 4955.487] Initializing built-in extension DRI2
    [ 4955.487] (II) LoadModule: "glx"
    [ 4955.488] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 4955.489] (II) Module glx: vendor="X.Org Foundation"
    [ 4955.489] compiled for 1.13.0, module version = 1.0.0
    [ 4955.489] ABI class: X.Org Server Extension, version 7.0
    [ 4955.489] (==) AIGLX enabled
    [ 4955.489] Loading extension GLX
    [ 4955.489] (==) Matched intel as autoconfigured driver 0
    [ 4955.489] (==) Matched intel as autoconfigured driver 1
    [ 4955.489] (==) Matched vesa as autoconfigured driver 2
    [ 4955.489] (==) Matched modesetting as autoconfigured driver 3
    [ 4955.489] (==) Matched fbdev as autoconfigured driver 4
    [ 4955.489] (==) Assigned the driver to the xf86ConfigLayout
    [ 4955.489] (II) LoadModule: "intel"
    [ 4955.490] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 4955.491] (II) Module intel: vendor="X.Org Foundation"
    [ 4955.491] compiled for 1.13.0, module version = 2.20.9
    [ 4955.491] Module class: X.Org Video Driver
    [ 4955.491] ABI class: X.Org Video Driver, version 13.0
    [ 4955.491] (II) LoadModule: "vesa"
    [ 4955.491] (WW) Warning, couldn't open module vesa
    [ 4955.491] (II) UnloadModule: "vesa"
    [ 4955.492] (II) Unloading vesa
    [ 4955.492] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 4955.492] (II) LoadModule: "modesetting"
    [ 4955.492] (WW) Warning, couldn't open module modesetting
    [ 4955.492] (II) UnloadModule: "modesetting"
    [ 4955.492] (II) Unloading modesetting
    [ 4955.492] (EE) Failed to load module "modesetting" (module does not exist, 0)
    [ 4955.493] (II) LoadModule: "fbdev"
    [ 4955.493] (WW) Warning, couldn't open module fbdev
    [ 4955.493] (II) UnloadModule: "fbdev"
    [ 4955.493] (II) Unloading fbdev
    [ 4955.493] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 4955.493] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
    Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
    Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
    Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
    Haswell Server (GT2+), Haswell SDV Desktop (GT1),
    Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
    Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
    Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
    Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
    Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
    Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
    Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
    Haswell ULT Server (GT1), Haswell ULT Server (GT2),
    Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
    Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
    Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
    Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
    Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
    ValleyView PO board
    [ 4955.496] (--) using VT number 7
    [ 4955.508] (II) intel(0): using device path '/dev/dri/card0'
    [ 4955.509] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 4955.509] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 4955.509] (==) intel(0): RGB weight 888
    [ 4955.509] (==) intel(0): Default visual is TrueColor
    [ 4955.509] (--) intel(0): Integrated Graphics Chipset: Intel(R) i830M
    [ 4955.509] (**) intel(0): Relaxed fencing disabled
    [ 4955.509] (**) intel(0): Wait on SwapBuffers? enabled
    [ 4955.509] (**) intel(0): Triple buffering? enabled
    [ 4955.509] (**) intel(0): Framebuffer tiled
    [ 4955.510] (**) intel(0): Pixmaps tiled
    [ 4955.510] (**) intel(0): 3D buffers tiled
    [ 4955.510] (**) intel(0): SwapBuffers wait enabled
    [ 4955.510] (==) intel(0): video overlay key set to 0x101fe
    [ 4955.593] (II) intel(0): Output VGA1 has no monitor section
    [ 4955.593] (II) intel(0): Output LVDS1 has no monitor section
    [ 4955.594] (--) intel(0): found backlight control interface /sys/class/backlight/thinkpad_screen
    [ 4955.676] (II) intel(0): EDID for output VGA1
    [ 4955.677] (II) intel(0): Printing probed modes for output VGA1
    [ 4955.677] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 4955.677] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 4955.677] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 4955.677] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
    [ 4955.677] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
    [ 4955.677] (II) intel(0): EDID for output LVDS1
    [ 4955.677] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 4955.677] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 4955.677] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 4955.677] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 4955.678] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 4955.678] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 4955.678] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 4955.678] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    [ 4955.678] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    [ 4955.678] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 4955.678] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 4955.678] (II) intel(0): Printing probed modes for output LVDS1
    [ 4955.678] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync (48.4 kHz P)
    [ 4955.678] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
    [ 4955.678] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
    [ 4955.678] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
    [ 4955.678] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
    [ 4955.678] (II) intel(0): Output VGA1 connected
    [ 4955.678] (II) intel(0): Output LVDS1 connected
    [ 4955.678] (II) intel(0): Using exact sizes for initial modes
    [ 4955.678] (II) intel(0): Output VGA1 using initial mode 1024x768
    [ 4955.678] (II) intel(0): Output LVDS1 using initial mode 1024x768
    [ 4955.678] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 4955.678] (II) intel(0): Kernel page flipping support detected, enabling
    [ 4955.678] (==) intel(0): DPI set to (96, 96)
    [ 4955.678] (II) Loading sub module "fb"
    [ 4955.678] (II) LoadModule: "fb"
    [ 4955.679] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 4955.679] (II) Module fb: vendor="X.Org Foundation"
    [ 4955.679] compiled for 1.13.0, module version = 1.0.0
    [ 4955.679] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 4955.679] (II) Loading sub module "dri2"
    [ 4955.679] (II) LoadModule: "dri2"
    [ 4955.680] (II) Module "dri2" already built-in
    [ 4955.680] (==) Depth 24 pixmap format is 32 bpp
    [ 4955.680] (II) intel(0): [DRI2] Setup complete
    [ 4955.680] (II) intel(0): [DRI2] DRI driver: i915
    [ 4955.680] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
    [ 4955.680] (II) UXA(0): Driver registered support for the following operations:
    [ 4955.680] (II) solid
    [ 4955.680] (II) copy
    [ 4955.680] (II) composite (RENDER acceleration)
    [ 4955.680] (II) put_image
    [ 4955.680] (II) get_image
    [ 4955.680] (==) intel(0): Backing store disabled
    [ 4955.680] (==) intel(0): Silken mouse enabled
    [ 4955.681] (II) intel(0): Initializing HW Cursor
    [ 4955.681] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 4955.684] (==) intel(0): DPMS enabled
    [ 4955.684] (==) intel(0): Intel XvMC decoder disabled
    [ 4955.684] (II) intel(0): Set up overlay video
    [ 4955.684] (II) intel(0): direct rendering: DRI2 Enabled
    [ 4955.684] (==) intel(0): hotplug detection: "enabled"
    [ 4955.983] (--) RandR disabled
    [ 4956.021] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 4956.021] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 4956.021] (II) AIGLX: enabled GLX_ARB_create_context
    [ 4956.021] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 4956.021] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 4956.021] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 4956.021] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 4956.021] (II) AIGLX: Loaded and initialized i915
    [ 4956.022] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 4956.023] (II) intel(0): Setting screen physical size to 270 x 203
    [ 4956.124] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 4956.124] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 4956.124] (II) LoadModule: "evdev"
    [ 4956.124] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 4956.125] (II) Module evdev: vendor="X.Org Foundation"
    [ 4956.125] compiled for 1.13.0, module version = 2.7.3
    [ 4956.125] Module class: X.Org XInput Driver
    [ 4956.125] ABI class: X.Org XInput driver, version 18.0
    [ 4956.125] (II) Using input driver 'evdev' for 'Power Button'
    [ 4956.125] (**) Power Button: always reports core events
    [ 4956.125] (**) evdev: Power Button: Device: "/dev/input/event4"
    [ 4956.126] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 4956.126] (--) evdev: Power Button: Found keys
    [ 4956.126] (II) evdev: Power Button: Configuring as keyboard
    [ 4956.126] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
    [ 4956.126] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 4956.126] (**) Option "xkb_rules" "evdev"
    [ 4956.126] (**) Option "xkb_model" "evdev"
    [ 4956.126] (**) Option "xkb_layout" "us"
    [ 4956.197] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
    [ 4956.198] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 4956.198] (II) Using input driver 'evdev' for 'Video Bus'
    [ 4956.198] (**) Video Bus: always reports core events
    [ 4956.198] (**) evdev: Video Bus: Device: "/dev/input/event2"
    [ 4956.198] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 4956.198] (--) evdev: Video Bus: Found keys
    [ 4956.198] (II) evdev: Video Bus: Configuring as keyboard
    [ 4956.198] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input2/event2"
    [ 4956.198] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 4956.198] (**) Option "xkb_rules" "evdev"
    [ 4956.198] (**) Option "xkb_model" "evdev"
    [ 4956.198] (**) Option "xkb_layout" "us"
    [ 4956.200] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
    [ 4956.200] (II) No input driver specified, ignoring this device.
    [ 4956.200] (II) This device may have been added with another device file.
    [ 4956.201] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
    [ 4956.201] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 4956.201] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 4956.202] (**) Sleep Button: always reports core events
    [ 4956.202] (**) evdev: Sleep Button: Device: "/dev/input/event1"
    [ 4956.202] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 4956.202] (--) evdev: Sleep Button: Found keys
    [ 4956.202] (II) evdev: Sleep Button: Configuring as keyboard
    [ 4956.202] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
    [ 4956.202] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
    [ 4956.202] (**) Option "xkb_rules" "evdev"
    [ 4956.202] (**) Option "xkb_model" "evdev"
    [ 4956.202] (**) Option "xkb_layout" "us"
    [ 4956.204] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 4956.205] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 4956.205] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 4956.205] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 4956.205] (**) AT Translated Set 2 keyboard: always reports core events
    [ 4956.205] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 4956.205] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 4956.205] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 4956.205] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 4956.205] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 4956.205] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
    [ 4956.205] (**) Option "xkb_rules" "evdev"
    [ 4956.206] (**) Option "xkb_model" "evdev"
    [ 4956.206] (**) Option "xkb_layout" "us"
    [ 4956.208] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event6)
    [ 4956.208] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
    [ 4956.208] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
    [ 4956.208] (**) TPPS/2 IBM TrackPoint: always reports core events
    [ 4956.208] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event6"
    [ 4956.208] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
    [ 4956.208] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
    [ 4956.208] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
    [ 4956.208] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
    [ 4956.208] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
    [ 4956.208] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
    [ 4956.208] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 4956.208] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
    [ 4956.208] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 10)
    [ 4956.209] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
    [ 4956.209] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
    [ 4956.209] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
    [ 4956.209] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
    [ 4956.209] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
    [ 4956.210] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse0)
    [ 4956.210] (II) No input driver specified, ignoring this device.
    [ 4956.210] (II) This device may have been added with another device file.
    [ 4956.211] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
    [ 4956.211] (II) No input driver specified, ignoring this device.
    [ 4956.211] (II) This device may have been added with another device file.
    [ 4956.213] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event7)
    [ 4956.213] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
    [ 4956.213] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
    [ 4956.213] (**) ThinkPad Extra Buttons: always reports core events
    [ 4956.213] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event7"
    [ 4956.214] (--) evdev: ThinkPad Extra Buttons: Vendor 0x1014 Product 0x5054
    [ 4956.214] (--) evdev: ThinkPad Extra Buttons: Found keys
    [ 4956.214] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
    [ 4956.214] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input7/event7"
    [ 4956.214] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 11)
    [ 4956.214] (**) Option "xkb_rules" "evdev"
    [ 4956.214] (**) Option "xkb_model" "evdev"
    [ 4956.214] (**) Option "xkb_layout" "us"
    [ 4960.630] (II) AIGLX: Suspending AIGLX clients for VT switch
    [ 4964.186] (II) evdev: ThinkPad Extra Buttons: Close
    [ 4964.189] (II) UnloadModule: "evdev"
    [ 4964.189] (II) evdev: TPPS/2 IBM TrackPoint: Close
    [ 4964.189] (II) UnloadModule: "evdev"
    [ 4964.189] (II) evdev: AT Translated Set 2 keyboard: Close
    [ 4964.189] (II) UnloadModule: "evdev"
    [ 4964.189] (II) evdev: Sleep Button: Close
    [ 4964.189] (II) UnloadModule: "evdev"
    [ 4964.189] (II) evdev: Video Bus: Close
    [ 4964.190] (II) UnloadModule: "evdev"
    [ 4964.190] (II) evdev: Power Button: Close
    [ 4964.190] (II) UnloadModule: "evdev"
    [ 4964.192] Server terminated successfully (0). Closing log file.

    karol wrote:
    Leonid.I wrote:@0x001A4:
    To run twm, you need to install xorg-twm from [extra] (I am not sure if it installs by default). Do you have xterm installed?
    According to his first post he has both xorg-twm and xterm installed.
    I do indeed.
    I went ahead and installed LXDE anyways, just to see what would happen. Exact same thing, it looks like everything is about to load but only the mouse cursor shows up. My Xorg.0.log is the same, so I won't post it again.
    I do get an error in the console about the openbox menu.xml file missing but I doubt that's related.
    X.Org X Server 1.13.0
    Release Date: 2012-09-05
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.6.0-1-ARCH i686
    Current Operating System: Linux x_00294-ibc 3.5.6-1-ARCH #1 SMP PREEMPT Sun Oct 7 19:33:50 CEST 2012 i686
    Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=ec6a9a60-8d8c-4de0-960b-9e2a044d0ca5 ro quiet
    Build Date: 05 October 2012 02:01:30PM
    Current version of pixman: 0.26.2
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Oct 15 18:12:28 2012
    (==) Using config directory: "/etc/X11/xorg.conf.d"
    Initializing built-in extension Generic Event Extension
    Initializing built-in extension SHAPE
    Initializing built-in extension MIT-SHM
    Initializing built-in extension XInputExtension
    Initializing built-in extension XTEST
    Initializing built-in extension BIG-REQUESTS
    Initializing built-in extension SYNC
    Initializing built-in extension XKEYBOARD
    Initializing built-in extension XC-MISC
    Initializing built-in extension SECURITY
    Initializing built-in extension XINERAMA
    Initializing built-in extension XFIXES
    Initializing built-in extension RENDER
    Initializing built-in extension RANDR
    Initializing built-in extension COMPOSITE
    Initializing built-in extension DAMAGE
    Initializing built-in extension MIT-SCREEN-SAVER
    Initializing built-in extension DOUBLE-BUFFER
    Initializing built-in extension RECORD
    Initializing built-in extension DPMS
    Initializing built-in extension X-Resource
    Initializing built-in extension XVideo
    Initializing built-in extension XVideo-MotionCompensation
    Initializing built-in extension XFree86-VidModeExtension
    Initializing built-in extension XFree86-DGA
    Initializing built-in extension XFree86-DRI
    Initializing built-in extension DRI2
    Loading extension GLX
    Openbox-Message: Unable to find a valid menu file "/usr/share/lxde/openbox/menu.xml"
    xinit: connection to X server lost
    waiting for X server to shut down pcmanfm: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0"
    after 2326 requests (2323 known processed) with 0 events remaining.
    Server terminated successfully (0). Closing log file.
    xinit: unexpected signal 2
    .xinitrc for my user
    exec ck-launch-session startlxde
    Very wierd.

  • Apple Cinema 23" on a PC? can't get it to work just has a blank screen?

    Sorry this may have been asked a million times but i have a 23" cinema HD display and i'm try to connect it to a laptop PC with the convertor to vga and no matter what i try it has a blank screen with the white power light. I have tried to change the res to the lowest it doesn't work what am i doing wrong please help!!

    You can't use a simple VGA to DVI adapter, since VGA doesn't have the digital video signals needed by Apple displays. You need a VGA to DVI converter, such as
    <http://www.gefen.com/kvm/dproduct.jsp?prod_id=4341>

  • This morning, Firefox stopped opening .pdf documents that I am trying to retrieve from websites. It does not download them, and the page goes blank, with nothing more happening. What do I do to fix it?

    I went to the FAA website, and I needed to review a document. I clicked on the link, the page turned blank, but I never saw the document. I tried again, but I still could not get the document. Word documents still bring up the dialog box allowing me to open the document. I went to another website to find additional information on the project I am working on, and I am experiencing the same problem, when I click on a link to a pdf, it will not open, and the download dialog box does not open.
    I have tried looking at applications and plugins, but everything seems to be fine. What do I do to fix this?
    Thanks,
    Anne

    Using the Adobe Reader plugin with Firefox
    * https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox
    Opening PDF files within Firefox
    * https://support.mozilla.com/en-US/kb/Opening%20PDF%20files%20within%20Firefox
    Check and tell if its working.

  • Sales Analysis Report - Items -- blank result

    Hi,
    I'm testing a setup and running the sales analysis report. It works for the Customer version but I get no results when running on Items.
    I'm on SBO 2007A SP01 PL07. There are open and closed invoices for inventory items; no credit memos have been posted. All Item type invoices.
    When I run by Customer, I get the correct data - open and closed invoices for that customer.
    When I run by Items, I get no results. The date range is the same for both reports.
    When I run the purchase analysis on Items, I get data for the same items I am trying to see in the sales analysis.
    Any ideas what could be causing this?
    Thank you,
    Heather

    HI Gordon,
    I left the default settings: 
    - Annual Report, Invoices, Individual Display, No Totals
    - Posting Date:  whole fiscal year
    - Main selection:  left blank/default (group = all, no properties)
    I have double/triple/quadruple-check even the Secondary SElection to make sure there's nothing there.
    I have also run it on Due Date instead of Posting Date, still no results (if run on Items).
    As I mentioned, the selection criteria is what I want but for some reason that one version, Items, does not work. The other 2 tabs work with the same selection.
    Heather

  • Discoverer report showing null instead blank

    hi,
    I am running report from discoverer and it is showing null instead blank, do I need to check some thing in pref.txt file in oracle 9i
    regards
    kumar

    hi,
    I am running report from discoverer and it is showing null instead blank, do I need to check some thing in pref.txt file in oracle 9i
    regards
    kumar

  • How to remove blank pages from WebI Report in view page layout option

    Hi,
             I am working in Business Objects XIR2 environment. I have a WebI report with several sections. I need to show the report as a book with 69 sections (each section on new page). there are 69 sections on cost center and each cost center section has almost 10 sections embedded in it. When i see in regular view - I only see 69 pages but when I try to see in "View Page Lay out" option, there is one blank page added after each results page.
    Please let me know how to remove this blank page. I need to give users the option to download the book as PDF on to their machine. Now, when I download to my machine, I see one blank page after each results page.
    Thanks in advance.

    Jus convert your report in Page Layout mode and see if your first pafe is getting expand in the second page.
    Now check if there are any cell going into second page.
    - if there are any blank cell which is there after table.
    you have to check formating very carefull.

  • Mail applications is blank when I open it, then it closes and opens again by itself, keeping blank

    In my Ipad, when I open Mail application it is blank. It stays like this for a few seconds, then it closes and open again by itself.  Keeping all time blank.

    Have you tried to force quit the app. Double tap the home button. Scroll sideways if needed to bring the mail app preview up on the screen. Flick that preview up and off the screen to close the app. Tap on the home page preview to exit the mode. Then try your mail again.
    Other things people have needed to do, especially after an update is to go into the settings, mail contacts and calendars, delete their mail account (it only deletes it off the iPad not out of existence) then exit out, go back i and re-enter the info.

  • I "upgraded" to FF4, now it doesnt work properly, wont open pages, will open blank tabs when i click on a link, tried to go back to the older one but that doesnt work now either, have tested it with Safari and it opens everything fine. Any ideas?

    After upgrading to firefox 4 im now having a lot of problems using the browser.
    if i try an open a link in a new tab it will just open up a blank tab, if i click on links or even type in the google search bar at the top it doesnt do anything, it just says "done" and the circle thing stops as if im on the page already, have tested it with Safari doing the same things and Safari works fine. I'd swap but all my bookmarks and passwords are in Firefox so id rather stay with that.
    I tried going back to the older version of firefox (3.5 or something) but seems the bugs are here to stay now.......so.......any ideas? because its really annoying, shouldn't have "upgraded".
    Is there a new patch coming out anytime soon or should i start getting used to Safari?
    Thanks for your help.
    Mark Lavery (Melbourne)

    I would copy over the entire thing if you have room.  With iTunes 10.4 though, you can download any previous iTunes purchases you have made in the past with your current iTunes account.  While in iTunes, look at the left hand side of your screen and select "Purchases" and look at the bottom right corner of the screen and select "Download Previous Purchases".  If you have an iPhone, iPod and/or iPad...you can do the same thing from each device.  Nice new feature...just remember that those ripped CDs need a back-up!!!  Enjoy...

  • My blog will not load--it gives me a blank white page.

    If I type in my blog's URL I can see it fine. But if I try to login or search on it or go into the archives, it gives me a blank white page. Not an error code. Just a white page. I can see my favicon in the address bar.
    I've tried it on FF and Safari. Same thing happens. I've tried it on other computers and the same thing happens.
    I have asked my host to look into it, they don't know what to do. I asked my ISP about it and they said it's probably browser issues.
    I looked thru all the help forums and altho' some people have this same problem not one of them had it resolved.
    HELP.
    a

    In your WordPress administrative panel, try deactivating the WP Super Cache plugin to bypass any problems with cached pages. Similarly, scrutinize your other plugins to see whether any of them are not absolutely necessary, in case there is a conflict.
    Then clear your Firefox browser cache and try again.
    Firefox > Preferences > Advanced > Network > "Clear Now"
    Any difference?
    Edit: Oh... if you cannot log in, then it's hard to administer plugins, isn't it. You might need a WordPress doctor to explain how to make changes using an FTP client or your web host's file manager.

  • I downloaded 11.1 but now can't access the store, can only view my library. I've reinstalled but still get a blank, white screen when I try to go to the itunes store. How can I get to the store for purchases?

    I downloaded 11.1 but now can't access the store, can only view my library. I've reinstalled but still get a blank, white screen when I try to go to the itunes store. How can I get to the store for purchases?

    In iTunes prefs>Store - is the Store check box unchecked?
    Did you repair pemissions with Disk Utility?
    MJ

  • How to print monthly calendars that are BLANK?

    Hi. I would like to use Oracle Calendar to print a monthly calendar that does NOT display my existing meetings within each day. In other words, I want to print a BLANK monthly calendar. Can anyone please explain how to do this?
    I'm using Oracle Calendar 10.1.2.3.0.398.
    Thanks in advance!

    Hi
    If you try this command:
    Get-MailboxPermission MyUser

  • How to print blank page in script

    Hi all,
    how to print blank page in script

    Hi,
    Try the command /: NEW-PAGE. Let me know if it is working.
    Ray

Maybe you are looking for