CS 5.5 loses audio in clip half way through.
I've imported an AVCHD (MTS) clip into PP5.5. It plays fine thru vlc and quicktime, but once imported it loses the audio half way through. Any ideas?
1st Read Bill Hunt on Audio Conforming http://forums.adobe.com/thread/726693
2nd Metadata contained in folder http://forums.adobe.com/thread/1015001?tstart=0
Similar Messages
-
Audio cuts out half way through video after conversion.
I just put together some video clips I've shot into a single video, then ran it through conversion. Half way through the completed video, the audio cuts out for the rest of the film. Yet in iMovie, it's still there. I've converted twice and it cuts out in the same spot. Could corruption in a single clip, kill the audio for the following clips? Since it takes hours to convert, I thought I'd ask before deleting the suspect clip and starting again.
I've spliced together clips before without problem, using the same camera source.
Thanks.
CheersI figured a work-around. From the clip where the audio cut out till the end, I dragged those clips to a new iMovie project. After converting, the sound was intact for that portion. Then I opened the complete version with audio cut-off in Quicktime Pro. Deleted the the half with audio loss. Then joined the new half I just created. Voila!
Only when I went to post the video on my vlog, did my Internet connection die (Comcast strikes again). -
I have just been watching (The Adjustment Bureau) a rental movie and about half way through the audio cut out, I tried rerunning the chapter but still the same problem so I tried the restoring function and now I have lost the 48 hrs viewing of the movie. So how do I get the movie back without paying for it again and is this problem likely to reoccoure and if so how do I rest without loosing the movie?
Hi David.
This must be a glitch in the movie file on the iTunes server because my husband and I just reached the same point in he film (The Adjustment Bureau) and no audio! Totally cuts out and doesn't come back in. We tried the same - turned off, signed out, and also couldn't see the rental in the menu... Sign out, sign back in and click 'Check for rentals' in the 'General' menu just under where you signed in.
It may come up with a negative 'no more rentals can be found' or similar but go back to the main screen and check anyway. It should be there. -
Encoded FLV audio cuts out half way
I'm trying to encode a.mov file to .flv using Flash Video
Encoder CS3. Every time I encode, no matter what settings I use,
the audio just stops half way through when played back in Flash. If
I encode in Squeeze, it works.
What's the deal?I am having the same problem. I am outputting a video from
Final Cut Pro to QT, then checking my QT file to make sure the
audio is there, then I encode in Flash Video Encoder CS3, and like
the person below me, the audio cuts half way through the video.
I was using a 480x360 QT file and converting to 15 fps
480x360 flv, audio cuts out. Using a 320x240 QT file and converting
to 15 fps 320x240, audio is there. -
Audio stops half-way through clip
Audio on movie clips stops half-
way through. This isn't downloaded music, but rather the background audio of the clips. Any suggestion
s?The footage appears the same from the Sony.
The full audio plays in the Organizer and from the clip in the project panel. The waveform shows for the entire length of the clip in the timeline.
I didn't see the blue progress bar you spoke about, but the program just went through the process of importing the clips and then the organizer opened.
Thanks. -
Anyone have an idea why clips imported are silent half way through the clip? The entire audio can be heard in quicktime.
Solved problem by converting to another file format.
The two that worked were .mov and MP4 that is .H264 -
Audio doesn't match video because repeated half way through
Hi guys,
I am currently editing videos from my Canon SLR with Adobe Premiere Elements (Windows).
In the same project, I have only uploaded videos taken the same day with the same equipment. I have been able to process them all normally apart from one. For some reason, when I play this file with a basic video player, everything works fine but when I import it in the Adobe software and play it either through the small window or in the timeline, I have the same problem:
Everything works fine (audio and video in sync), until it reaches a specific point (totally random as far as I can tell) when the video keeps going but suddenly the sound repeats itself from the beginning of the file (and the audio which would correspond to the video is replaced by it). For you to understand better the problem:
Video: ABCDEF
Audio: ABCABC
I have tried opening it in a different project and somehow it happens exactly at the same point.
I am totally clueless of what it comes from and getting really frustrated!
Any idea?
Cheers
BabsHello, I'm new to using forums like this. Is it appropriate for me to post that I'm having the same issue? Also sounds similar to Audio doesn't match video because repeated half way through as well.
My situation is:
Win7 64-bit, i7 920, 2.67GHz, 8GB RAM
Multiple Nikon D7000 video clips I've taken play back fine except for the following clip. In Windows Media Viewer, I have no problem, but in PE10, in the timeline editor, this clip repeats the audio from the beginning starting about 6 minutes into the video. I have Quicktime version 7.7.5 installed which I noticed was mentioned as a possible culprit in the other thread.
I've been using my camera primarily for stills, but decided to have my mom tell her story before she wasn't able to. I'm so frustrated with this problem because I know the audio is just fine since I can play it back synchronized throughout the entire clip in WMV. I've tried cleaning out PE caches as best I can figure them out and created new projects without any better luck.
Any help would be greatly appreciated. I'm open to getting a new version of PE or another program if I could believe that I wouldn't run into this issue again. This seems like such a vanilla problem since all my other clips seem to be fine and this one does too on WMV.
Thanks for any help you can provide. I don't really know where else to go to figure this out.
Joel
My Premier Elements Project settings are:
Editing Mode: DSLR
Timebase: 23.976frames/sec
Video:
Framesize: 1920 x 1080
Pixel Aspect Ratio: Square Pixels (1.0)
Fields: No Fields (Progressive Scan)
Display Format: 24fps Timecode
Audio:
Sampe Rate: 48000 Hz
Output from MediaInfo
General
Complete name : Z:\NikonVideo\MomsStory\JDB_20140702_6537.MOV
Format : MPEG-4
Format profile : QuickTime
Codec ID : qt
File size : 1.46 GiB
Duration : 10mn 32s
Overall bit rate : 19.8 Mbps
Encoded date : UTC 2014-07-02 18:22:46
Tagged date : UTC 2014-07-15 03:24:05
NCDT : NCTG
Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : Yes
Format settings, ReFrames : 2 frames
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 10mn 32s
Bit rate : 18.3 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 23.976 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.368
Stream size : 1.35 GiB (92%)
Language : English
Encoded date : UTC 2014-07-02 18:22:46
Tagged date : UTC 2014-07-02 18:22:46
Transfer characteristics : BT.470 System M
Matrix coefficients : BT.601
Audio
ID : 2
Format : PCM
Format settings, Endianness : Little
Format settings, Sign : Signed
Codec ID : sowt
Duration : 10mn 32s
Bit rate mode : Constant
Bit rate : 1 536 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Stream size : 116 MiB (8%)
Language : English
Encoded date : UTC 2014-07-02 18:22:46
Tagged date : UTC 2014-07-02 18:22:46 -
Making simple cross desolves at the end of still photo clips from my library.
Not making a clean disolve between clips.
Single frames from the previous clip are flashing half way through the desolve.
Did both a drag and drop and insert disolve.Making simple cross desolves at the end of still photo clips from my library.
Not making a clean disolve between clips.
Single frames from the previous clip are flashing half way through the desolve.
Did both a drag and drop and insert disolve. -
I've recently downloaded an album but some songs only play half way through and i'm no longer able to hear any audio. What can i do about this? Thanks
I am sorry to hear. Yes it's very disappointing and the fact that you can't at least re-download your purchase makes it that much more irritating haha well thank you and good luck!
-
I cannot hear my entire audiobook. About half way through it there is no audio. Can I re-download it?
They downloaded into seperate files but when I double click the .exe file for the 7z it works fine, however with the other file i recieve a message that "The file archive part of adobe Photoshop 11 is missing. You need all parts in the same file to extract Adobe Photoshop 11. Please download all parts." It looks like the download should be fine, I never recieved an error and I've now downloaded it twice (it takes forever) and neither will work. I am running Windows 8 and I'm wondering if there might be a conflict somehow?
-
Why does the video freeze half way through my movie and the audio keep going?
Why does my movie freeze half way through and the audio continues?
Most likely this is due to running out of virtual memory. You can reset virtual memory by restarting your Mac.
Long term you may want to consider purchasing more memory. -
My music quality drops half way through - wave file, is there a way to make an improvement
My music sound quality drops half way through - its a wave file, is there a way to make a the other half as good as the first half?
Firstly can you tell us what sort of drop in quality in you are experiencing? Is this music that you have recorded yourself using Audition or is it imported from somewhere else? Without knowing what has happened to it it is impossible to say if any improvement can be made.
If it is audio that you have recorded and edited in Audition you must have done something to it to make it change half way through. You will probably need to go back a few steps in your editing process to recover the sound. -
Footage fades a little bit half way through interview, how do I fix?
Greetings!
I'm working on a Doc that has interviews with Celebrities, one of the interviews is with Linda Evans and about half way through the interview the lighting fades a little bit. It's just a gradual fade, happens over 10-15 frames, but it wasn't me that did it. Perhaps the camera man changed the Aperture or someone dimmed the lights. Either way, it's noticeable and I was tasked with fixing it. Ugh!
http://youtu.be/FDWA2wLUjtw
Anyway possible to do some sort of correction using FCP to fix it or am I pretty well up the creek? Any advice would be *huge* as this is a major project and will be playing on the PBS channel KLCS in LA this Spring so I'm going all out on this one. Thanks in advance!
Best Regards,
MattyAPply the 'brightness and contrast' filter to the clip. then go into the clip and you should be able to keyframe the filter. (I don't have my mac in front of me to verify, sorry)
Another way is to use the blade to cut the clip right where it starts to fade. APply the brightness and contrast filter to the darker part, brighten it up a bit and if you fiddle just right you can adjust the brightness seamlessly.
Another cheaters way could be to cut to any B roll or another angle during the fade. Depending on how dramatic it is people may not even notice the difference, or you can make any alterations and they won't see them because they won't be able to remember just how bright it was before. -
Why do songs stop playing half way through?
My husband downloaded a new playlist to his iphone, but many of the songs end half way through and then go on to the next song. How can we fix this?
Hi ktrib76,
In my experience, the songs that are skipping may not have transferred over to your husband's iPhone correctly. I would advise you to uncheck the "Sync Music" checkbox, and apply the changes (so there is ultimately no music syncing to the iPhone).
Once you have done that, recheck the "Sync Music" checkbox, and apply the changes once more. This will instruct iTunes to completely remove all music from the iPhone, and then copy the files once more. If you have a large amount of music, this initial sync may take a while.
If the above does not resolve your issue, see the following articles:
iPhone and iPod touch: Songs or other audio content are skipped during playback
http://support.apple.com/kb/TS3159
Troubleshooting songs that skip
http://support.apple.com/kb/TS3217
Cheers!,
Matt M. -
OneStep DVD lost of sound half way through the tape
When transferring one of my mini dv's I completely lose all sound half way through the tape. This lost of sound also corresponds to a new scene in the tape. From then on all sound is lost. The following tape is done in the exact settings (surroundings and camera setting) but the sound is ok. FYI, I’m running at 16bit all the time. Can anybody help?
Thanks
Cubi
iMac G5 20" iSight Mac OS X (10.4.3)Just import your tape into iMovie HD and send it to iDVD.
Maybe you are looking for
-
Can't select boot disk after restart from Windows 7
I installed Windows 7 RC 7100 on the Mini a while ago and it is working now using the Apple drivers and an updated chipset driver from Nvidia... except: When I restart the machine from OS X and hold the Option key I get the disk selection screen and
-
Long Number being displayed when people receive Texts
People who have been receiving texts are getting a long string of numbers, like 13 numbers?? what is this?? how can this issue be resolved?
-
Any resolution to nVidia GPU overheating/stuttering issues on T410s?
I've been digging around the forums and have seen a lot of old posts with people having similar symptoms: switchable graphics (nVidia part) overheating and causing stuttering problems, crashes, freezes, etc. under heavy load. I talked to tech support
-
Time stamps in mov files created with iPhone and Vista
This has to do with the time stamps for movies created with the iPhone 3GS. When I directly view the files on the iPhone in Vista, it populates the "date taken" field. However, when I copy the files from the iPhone onto my desktop computer, I no long
-
[solved.. kinda]Nexuiz problem with a mouse
When I move my mouse in Nexuiz, sometimes cursor teleports futher, it doesnt moves smoothly. It's very hard to play with this problem, maybe anyone knows a solution? I'm using USB mouse, here's my xorg.conf: Section "InputDevice" Identifier "Evdev Mo