CS 5.5 (Mac) Update Issues

I've been stuck on Dreamwever CS 5.5 Build 5366 (v 11.5.1.5366) for well over a year now and none of my other CS products (Photoshop, Flash Builder, Fireworks, Illustrator, etc.) have been updating.  It seems that when the updater updated itself (currently Adobe Application Manager is v 7.0.0.233), there have been no updates.  The only updates I am getting from Adobe are for Acrobat, which I think has it's own seperate updater?
It cannot be possible that there were only 2-3 version pushes from the CS 5.5 launch.  Just not possible.  There are too many patches that have needed to happen since the launch.  I refuse to go to CC and just want my CS 5.5 to work properly and update itself with any of the patches out there.
Can anyone assist?  I have also tried to find a phone number to call for Adobe support, but apparently they have taken those down?
Much thanks in advance,
Dan

There have been no updates for CS5.5 since CS6 was launched in April of
2012. If you're that sure there are updates you don't have then go to
Adobe.com and click on downloads. You'll find all patches there.

Similar Messages

  • 6500 Slide + Mac = Update Issues

    I'm wanting to update the firmware on my 6500 Slide, I'm on a Mac. I have BT, and the update section on my phone allows me to update using BT. I just can't find the darned software to download. The beta Mac software doesn't support this phone... LOL. Any help?
    Currently I'm on v 04.81.

    Hi 6500macman
    Unfortunately you would have to install Windows under BootCamp or use Parallels on your Mac to enable you to use Nokia Software Updater. Although there has been a menu option for updates over the air, in view of increasing size of firmware update and a reluctance for networks to embrace this feature it has never come to anything.
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Acrobat 9.2.0 (mac) update issues

    Trying to update from Acrobat 9.1.0 Pro to 9.2.0 on Mac OS 10.9.  Upon launching the updater, it asks which Acrobat application I want to update.  When I browse to the Acrobat Pro folder under "Applications", the Acrobat Pro app itself is grayed out so I cannot select it.  Screenshot is below.  Any ideas are greatly appreciated.

    Acrobat udpates sequentially. First install Acrobat 9.1.1, 9.1.2, 9.1.3 then you should be able to install 9.2.

  • Elements 12 for Mac update issue

    Updating Elements 12 (Photoshop Camera Raw 8.2)requires autoanalyzer to be shutdown yet the Elements preferences for media analysis are all deselected and the run menu option greyed out.
    Anyone have a resolution for this?

    with elements 12 closed, open your adobe creative cloud app (or adobe application manager) and update from there.
    if necessary restart your computer and update before opening elements 12.

  • My new iPod Classic will not sync with my new Mac Book. My iPhone 5 does, so does 2nd gen. iPod touch. Apple Store cannot figure it out. Tried different Classics on different Macs, same thing. iTunes update issue ?

    The iPod Classic I bought a month ago is not synching with my new Mac Book I bought 3 weeks ago. All the software was immediately updated. My iPhone 5 synchs fine, and so does my 2nd generaton iPod Touch. The original computer I synched all of these devices on was my HP latop. I bought my Mac and Classic to the Apple Store for a 'Genius Appt' and they could not figure out what the problem is. The connected my Classic to another computer and the same thing happens. It says device is not recognized. They also took other iPod Classics and connected them to my Mac and other Macs. The same thing was happening. They took notes and said it probably is an iTunes update issue.
    I can manually drag songs into my Classic but I lost all playlists because it cannot be backed up as well and they had to restore it. For now I am holding on to it but it's usless to me if I cannot use it the way I liked too. I used it for the gym and bike riding and my last iPod battery died after 6 years. A charge would last 45 miutes. I love the Classic for what I use it for but it's a $275 brick to me now. At least the renewed by receipt so I can get a full refund.
    Is anyone else seeing this issue ? The Apple Store employee said he saw a first generation iPad havng the same issue. As of now the Support Dest is unaware of this. As much as I love my new Mac I am disappointed I cannot sync my new Classic to it. Total bummer.
    Any help would be apprecated.

    By the way, I totally restored everything. It was ok. It starts to 'unrecognize' my iPod Classic when it comes to synching with iPhoto. After this happened all the menus disappeared from my iPod (music, Podcasts, movies synched fine). It seems to be a problem when synching with iPhoto. It was the same thing before.

  • Just did a Mac update yesterday for Yosemite and I can not open a picture in elements with out it crashing.  Spent over 4 hours with Mac and it came down to an Adobe Issue with the New Photo which is replacing the I photo. Elements does not recognize it,

    Does anyone know a direct number for adobe that will not cost you to just ask about their program which will not work with a new mac update!

    You can do that in iPhoto, too. Just go to the iphoto prefs>advanced, and set PSE as your external editor. Note that the actual editor is not the file at the top level of Applications>Adobe Photoshop Elements < version number >, but rather hidden away inside the Support Files folder:
    Then you just right the click the photo in iphoto and choose edit with external editor.
    If you have the new Photos app, you can't drag and drop, either.

  • Is there a consensus on how to solve security update issues?

    hi,
    i'm writing to you from a PPC G4 (AGP graphics) that will self-destruct by the time i switch off and (attempt) to re-start tomorrow. i will then need to do a re-install, just to see if i have gotten any replies (grinds teeth to the root). it will probably be my 8 th re-install in the past month. i just can'st takes no mores, Cap'n
    <exasperation>deep breath... each time i have done a clean install, zero-ed all data when erasing (7 times over, on this occasion), repaired permissions before and after each software update, and followed every advice i could find via google to pre-empt another "Error: underlying task reported failure on exit" and the inevitable hanging grey screen; i have earned nothing but another Disk Utility report of the same problem. my HD seems to be OK - Disk Utility and Disk Warrior both say it's "verified" by SMART (although i've read this could be no assurance...). it's 40 GB, nothing else installed but NetBarrier; nothing saved on it (just 3GB of OS).
    i've searched this forum over the last weekend and come across a diverse range of methods in resolving software update issues. i have tried downloading the security update and safari 3.2 directly from the site and bypassing Software Update- to no avail (but noticed that they are quite larger in MB than via Software Update??).
    the one suggestion the intrigued me was installing the update via Terminal. why would this be any different? the worst thing about this is that there is no universal way that'll work for all, just individual solutions for different macs??? could my problem be exacerbated by using the double layer (double the permissions to fix?) of a Panther OS with Tiger Upgrade disk?
    when i last tried to resolve the "error" with safe mode, fsck and DU Repair Disk/Permissions, which initially failed, i resorted to Disk Warrior, which re-built the directory, and "fixed" the HD. when i re-tried fsck it said the HD was "ok", but i still had the "error: underlying task..." on DU?
    is there an issue with the Security Update oo8 because it's PRIMARILY for 10.5 and not Tiger? why have some encountered this problem and others escaped any seeming conflicts ? is this problem also caused by JAVA updates (there are, after all, 4 updates!)
    more importantly, WHAT CAN I DOOOOOOOO?
    thank you

    looking at your suggestion to check /Library/Startup items in the concurrent thread ("Help needed after installing Security Update 2008-008"), i recalled that the only thing i have in this file system is 3 folders concerning Intego, NetBarrier and Virus Barrier. one of these contains the NetBarrier x4 daemon which has no image, just the apple "pencil, ruler, pen on paper" "A" image. i don't think it correctly downloaded, but this the case in every instance.
    i'm running netbarrier x4 10.4.5 updated and downloaded on installation. intego Support says that there should be nothing in my "Startup/Login items". i thought they meant Login items (users>login items) because when i take the folders out of my "/Library/Startup items", NetBarrier fails to "initialize".
    intego is now on newtbarrier x5, but they say x4 is fully compatible with Tiger???
    my baby maybe getting on, but it's strong enough, i just need to know what's bugging it!

  • PC will not update. Mac updated fine...

    When trying to update from the PC I get a message that states that the update server is down or may be offline, or the firewall settings could be wrong.
    Would that be MY firewall settings?
    The mac updated with no problem, but my PC will not update.
    Thanks

    Hi Wizwow,
    Its possible it could be your firewall settings. This document might help.
    Sign in or activation errors | CS6, CS5.5 Subscriptions, CS6 Perpetual
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    This is the path to the updater executable, you might be able to grant access for it in the firewall software directly.
    C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\core\PDApp.exe
    -Dave

  • Ps CC 2014 is not working correctly after mac update to Yosemite 10.10.1.  Select does not protect unselected areas.  Magic eraser erases unselected ares.

    Ps CC 2014 is not working correctly after mac update to Yosemite 10.10.1.  Select does not protect unselected areas.  Magic eraser erases unselected ares.

    Yes my particular issue is not like yours. However, there have been many other laptop users experiencing similar problem to yours after 3.10 kernel. Mostly it seems to be bumblebee users that experience your problem with the blank screen. We do know that nvidia have yet to make their official drivers work with kernel 3.10 and up. The drivers in the Arch repository have been patched to work with 3.10. From what I have seen, this also only seem to be affecting laptops with newer nvidia gpu's. I fear there is not much to do with this problem until nvidia give official 3.10 kernel support.
    My suggestion would be to stick with 3.9.9 kernel and the drivers that work with it, and don't upgrade those packages until nvidia has addressed these issues. If you have a look at the nvidia forums you will see quite a number of topics mentioning black screen when starting x on 3.10 kernel, and also a thread for the system dying. Reading some of the threads there may help you keep up to date on whether or not the issue seem to be solved.
    https://devtalk.nvidia.com/default/board/98/

  • Has anyone called about the 1st Gen Update issue?

    I was just wondering if anyone has actually called Apple about the 3.1.3 Update issue with the 1st gen iTouches. I don't want to waste my time and call when they might just respond with "there's no current solution". My iPod has been bricked on that screen with the "plug in the USB cord" symbol for a few days. Help!

    My wife had the same problem with 1st gen 32gb Touch. She uses a pc based laptop with Vista OS. Couldn't get past the Apple logo even when trying to reset. I plugged into my Mac tonight, and for the heck of it, reset the iPod using the on/off button and home screen button. It now would appear in my iTunes and allowed me to reset. It is starting from scratch again (as she doesn't appreciate my play list), but at least it is fully operational again.
    Have seen where others state they can't restore. May be able to using a Mac. Food for thoughts anyway. Hope this helps.

  • Since Mac update, LR 5 partially hangs in F-full screen view

    Since mac update, LR 5 hangs in F-full screen mode. Cannot go to Grid, Loupe or any other functions. Other functions work just fine. Called Apple support, they suggested a reset whihc I di but no luck. Any suggestions? or new udate for LR5?

    I have exactly the same issue.  Essentially I can now longer do Fullscreen preview without getting stuck in a loop.  Quiting the program will solve the problem until you press the F key again.  Adobe please come up with a fix for this as I and others have lost the Fullscreen preview function.

  • Why do the mac updates take a ridiculously long time

    why do the mac updates take a ridiculously long time? 10 hours? this is ridiculous - my ISP is 40mbps

    Which updates were you trying to get? If you are going to a very busy web site or server, the connections could be extremely slow. But to wait so long invites troubles.
    If the machine is terribly slow, that should be an indication some maintenance or repair may be needed first. Some keyboard shortcuts can be used to check and attempt repair, and the problem likely is in the Mac.
    Everything from the amount of RAM installed, to the total capacity of the HDD (or SSD) vs free or unused space on the drive, is important to the function of the OS X. Or there may be an issue, if the OS X checks out OK, in the internet connection. If you use wireless mostly, check the connections by wire instead.
    Try to not get into a position where you end up using 'force quit' if the computer appears to freeze up. In the process of an update or upgrade, that's almost never a positive outcome.
    Good luck & happy computing!

  • Penryn Macs having issues?

    Okay,
    I have finally decided to move to Mac OS and buy a MacBook Pro.
    * iWork '08 preinstalled
    * Accessory Kit
    * MacBook Pro 15-inch Widescreen Display
    * 2.4GHz Intel Core 2 Duo
    * 200GB Serial ATA Drive @ 7200 rpm
    * Backlit Keyboard/Mac OS - U.S. English
    * SuperDrive 8x (DVD±R DL/DVD±RW/CD-RW)
    * 2GB 667MHz DDR2 SDRAM - 2x1GB
    * Apple Remote
    * NVIDIA GeForce 8600M GT with 256MB
    I am extremely exited. But before i order, i was wondering if I should expect allot of problems? About 2 years ago, my friend bought a macbook and had to have it replaced 5 times. How have the Penryn macs been?
    This will l be my first Mac ever so I am hoping to have a good transition to the mac world:)
    Thanks,
    Mac Zac.

    Hi Zac.
    Let me be the first to say, welcome to the light side!
    Regarding the Penryn Macs: No, there are not so many issues that you should hold off buying one. If you browse the forums here you'll find lots of people running into problems. But remember that all the millions of people that DON'T have problems don't come here to tell you everything's working fine. For the vast majority of people, Macs work seamlessly, day in and day out.
    Of course, like all technology products, sometimes Macs have issues. They are made out of the same silicon and chips as other computers and, like those other computers, components can fail or go bad. That's just life. The good news is: it's rare.
    Likewise, Leopard is running extremely well for the vast majority of people. To be sure, there are a few small issues affecting small groups of people. Some folks are having wireless troubles, others are seeing some typing issues after a keyboard firmware update, for some folks iTunes is locking up while browsing cover flow. But, again, these issues don't appear to be too widespread and I would certainly not hold off buying a Mac because of them. You can bet that Apple engineers are all over the issues and they'll be resolved soon.
    To sum up: the state of the Mac world is fantastic. Like everything else in life, it's not perfect. But it's as close as you'll get with a computer! My advice is to pull the trigger and enjoy the switch! And I'll put my money where my mouth is as well: my $3,000 Penryn MacBook Pro arrives tomorrow morning.

  • Flexbuilder 201 update issues

    I just downloaded the 201 update of Flexbuilder. Here are my
    comments.
    It requires 500MB of disk space for the installer to run yet
    it doesn't tell you how much it needs before it will install.
    The eventual program is a lot bigger than it was before, it
    is now taking up over 500MB space. Far too much I think. You've got
    to remember that not all developers have top notch laptops with
    loads of disk space at their disposal. I had to delete some other
    programs on my Mac Mini at home to get this to work on Windows.
    The code colouring doesn't work any more past line 1745 of my
    existing Flex 200 app. If Iclose and reopen the project, refresh in
    design mode, clean in source mode, no difference. The code insight
    does work though.
    I have so far noticed no improvement to the slowness of use
    and the odd file handling problems of this product since the last
    version, which are the major issues as far as I'm concerned.
    I also couldn't see where the Mac update was. It says there
    is a Mac update but is that of the 2beta or a 201 release, either
    way it was unaccessable.
    A feature creep version I fear. Ugh.
    kimb

    Hi,
    I fixed this issue on my computer by opening Device Manager and manually telling it to update my Synaptics HID TouchPad drivers. Something is broken in the Windows Update interface, but if you tell it to update the drivers via the internet from Device Manager,
    it works perfectly and Windows Update no longer tries to update it.

  • Why can't we get a straight answer from Apple about updater issues?

    Why are there thousands and thousands of posts from people all having the same issue? We try to update IPod software using latest updater, and it causes IPod to no longer be recognized. All we want is someone from Apple to FIX THE PROBLEM! Yet all we get are refferals to complicated articles that never seem to work for at least half the people. Clearly it is a problem with these updaters. WHY IS APPLE NOT FIXING THIS ISSUE? Can anyone give me a straight answer!?

    Hi Wolf,
    Welcome to Apple Discussions
    "thousands and thousands of posts"
    There are roughly 10,300 thread with 50,000 posts in the iPod Nano forum, and there are probably another 500,000 who don't even know it exists. I don't there there has been a thousand posts on the updater issue. It may seem like thousands upon thousands, but don't forget; you're at an Apple Support Forum.
    "All we want is someone from Apple to FIX THE PROBLEM!thousands and thousands of posts"
    There's no need to "shout". I don't think Apple is going to hear you from shouting in a user to user forum. Nor will you probably get a answer (here) from Apple for the same reason. I have a -------- (straight) answer for you. I don't know what's going on specifically (no one really knows in this forum because they are all users. Anyone who would know won't say), but I can assure you that Apple isn't ignoring the issue. They are the quickest to respond to any problem that comes their way. If you would like to get Apple's attention, I don't suggest ranting and raving in the iPod user to user forum. I suggest submitting polite feedback to Apple here.
    Jon

Maybe you are looking for

  • Slow performance of discoverer portlets

    Hi, I am running into slow performance of a particular page in portal, there are multiple sites hosted on the portal but these all have static text and are very quick to load but the one page with discoverer portlets and a web-clippping portlet is ta

  • My pc no longer recognizes my ipod.  What can I do

    My pc will no longer recognize my ipod touch.  I looked in my computer not there.  ITunes does not see it either.  However, when I unplug it from my pc I get the usual sound of hardwear being disconnected.  Any ideas on how to get my pc to see my IPo

  • Everything is read only after reboot?!

    after installing arch and awesome it worked fine Ive done this before, however I have 4 harddrives 1 internal 3 external, I went to fstab and added the internal, did the uuid=numberwhatever, ntfs default 0 0 and it worked fine, but when I restarted I

  • Cube Processing Options

    I have cube contained around 60 partitions (partitioning by month). Every day , I process cube by current month partition. And then i process index to partition to make sure for aggregation build. What will happen if I stop doing ProcessIndex for rem

  • Update to IOS 5.0.1 issues with the feaures

    why after i update my iphone to ios 5.0.1 there is no show my caller ID or call forwording... if I go to setting -phone there is no option there , before with ios 5 i can see it but when i update it to the new ios 5.0.1 I dont see the options there??