CS11, CS12 - Function Module

Hi All,
I am building a infoset-query to read a multi-level BOM just like CS11 or CS12, so i would like to know which Function Module should i call in the program?
Await inputs.
Vivek

Hi Sankaran,
Thank you very much for your inputs. I will work on the infoset based on your inputs & keep you updated, if it fulfils my requirement.
Vivek
Feedback:
May i know which function module reads a multi-level BOM, i tested each function module, but the function call gives an error.
Can you please let me know which fileds in the function module the following field refers to?
1. Material
2. Plant
3. Alternative BOM
4. BOM application
5. Valid from
6. Change Number
7. Revision Level
8. Required Quantity
Await your inputs
Message was edited by:
        Vivek

Similar Messages

  • Function module for CS12

    Hi Guys,
    My requirement is to give multiple selection in CS12 report
    How to find out the function module of CS12
    How to generates Z report out of that
    Thanks and regards
    Thamizhchelvan G

    Hi,
    Pls check below function module, this will suitable for your requirement.
    CS_BOM_EXPL_MAT_V2
    for test  Goto TCode SE37 and enter this function module and test it
    Regards,
    Sankaran

  • CS11 &CS12- Moving Price and standard price not appering for items

    Dear Gurus,
    CS11 &CS12- Moving Price and standard price not appering for items.
    is it a bug for my system alone\.
    or a bug overall in SAP itself.
    Pls advise.
    Siva

    Dear Siva,
    Its the standard functionality of SAP.
    You will not get any cost related data in the reports like CS11,CS12,CS13.
    You can try CK13N(which shows the components of the BOM along with the cost) or else CK86_99.
    At Functional module level execute this one CS_BOM_EXPL_MAT_V2 and ensure X is included for the
    input field MBWLS.
    And also check these SAP notes 177006 and 686509.
    Check and revert back.
    Regards
    Mangalraj.S

  • Function module to get the BOM details for a material-plant combination

    hi
    Is there any function module to get the BOM details such as
            BOM Usage       -STLAN
            Alternative BOM -STLAL
            Items                -POSNR
            Required Quantity-EMENG
            Resulting Quantity-MENGE
            Unit of measure    -BMEIN
            Base unit of measure-MEINS
    for a given material-plant combination
    if so please suggest me some FMs.................
    Awaiting for ur reply..............

    try the below fm it may be useful for you
    DATA : BEGIN OF I_BOM OCCURS 0.
            INCLUDE STRUCTURE STPOX.
    DATA : END OF I_BOM.
    CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
        EXPORTING
          CAPID                 = 'PP01'
          DATUV                 = SY-DATUM
          MEHRS                 = 'X'
          MTNRV                 = P_MATNR
          WERKS                 = P_WERKS
        TABLES
          STB                   = I_BOM
        EXCEPTIONS
          ALT_NOT_FOUND         = 1
          CALL_INVALID          = 2
          MATERIAL_NOT_FOUND    = 3
          MISSING_AUTHORIZATION = 4
          NO_BOM_FOUND          = 5
          NO_PLANT_DATA         = 6
          NO_SUITABLE_BOM_FOUND = 7
          CONVERSION_ERROR      = 8
          OTHERS                = 9.
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    just befor use it check your application area.for my case it is PP01. you can find it in CS12 when you are exploding the bom the value you are giving in BOM application that is the value for CAPID.
    Just go to se37 and checkout the fm it has lot of options here I am using the minimum things.
    regards
    shiba dutta

  • BADI /BAPI /Function Module in PP

    PP Experts,
    I need help to identify the BADI /BAPI /Function Module in PP for
    BOM Explosion multilevel (TXn CS11)
    Planned Order Create and Change (Txn MD11/MD12)
    Production Order Create and Change (CO01/CO02)
    Simulation Order (Co01S/Co02S)
    Appreciate your valuable inputs.
    Thanks and Regards,
    Pradeep

    Hi,
    Following Enhancements available for the said T-Codes
    Transaction Code - CS11 Display BOM Level by Level
    Enhancement
    PCSD0014 Wissensbasierte AuftragsStl:Status setzen beim fixieren
    PCSD0013 Customer-specific processing of an explosion for BOM browse
    PCSD0012 Customer - Mat. number/mat. number during material exchange
    PCSD0011 Knowledge-based order BOM, parallel update
    PCSD0010 Order/WBS BOM, determine explosion date
    PCSD0009 Order/WBS BOM, determine URL page
    PCSD0008 WBS BOM: Customer-specific explosion for creating
    PCSD0001 Applications development R/3 BOMS
    PCSD0002 BOMs: Customer fields in item
    PCSD0003 BOMs: Customer fields in header
    PCSD0004 BOM comparison
    PCSD0005 BOMs: component check for material items
    PCSD0006 Mass changes user exit
    PCSD0007 Check changes in STKO
    Business Add-in
    BOM_EXIT BOM User Exit
    BOM_IPPE iPPE Checks Within BOM Maintenance
    BOM_UPDATE Maintain BOMS
    CEWB_BOM_CUS_FIELDS EWB: Customer Fields with BOM Header (Screen Enhancement)
    CEWB_BOM_UPDATE Check Bill of Material on Saving
    CEWB_ITM_CUS_FIELDS EWB: Customer Fields with BOM Item (Screen Enhancement)
    Transaction Code - MD11/MD12 Create Planned Order
    Enhancement
    LMDR2001 User exits restr. profiles of opt. pur.ord.-based load bldg
    LMDZU001 User exits in additional planning
    Transaction Code - CO01/CO02/CO01S/CO02s Create production order
    Enhancement
    PPCO0010 Enhancement in make-to-order production - Unit of measure
    PPCO0012 Production Order: Display/Change Order Header Data
    PPCO0013 Change priorities of selection crit. for batch determination
    PPCO0015 Additional check for document links from BOMs
    PPCO0016 Additional check for document links from master data
    PPCO0017 Additional check for online processing of document links
    PPCO0018 Check for changes to production order header
    PPCO0019 Checks for changes to order operations
    PPCO0021 Release Control for Automatic Batch Determination
    PPCO0022 Determination of Production Memo
    PPCO0023 Checks Changes to Order Components
    STATTEXT Modification exit for formatting status text lines
    PPCO0009 Enhancement in goods movements for prod. process order
    CCOWB001 Customer exit for modifying menu entries
    COIB0001 Customer Exit for As-Built Assignment Tool
    COZF0001 Change purchase req. for externally processed operation
    COZF0002 Change purchase req. for externally procured component
    PPCO0001 Application development: PP orders
    PPCO0002 Check exit for setting delete mark / deletion indicator
    PPCO0003 Check exit for order changes from sales order
    PPCO0004 Sort and processing exit: Mass processing orders
    PPCO0005 Storage location/backflushing when order is created
    PPCO0006 Enhancement to specify defaults for fields in order header
    PPCO0007 Exit when saving production order
    PPCO0008 Enhancement in the adding and changing of components
    Business Add-in
    SIDAT_UPDATE Change date of price simulation
    CAUFVD_CHANGE BAdI: Overall Network Scheduling with Selection Option
    AFABD_CHANGE Change Relationship
    PPPI_SEL_ORD_EXT_REL
    Regards
    Ahsan

  • For level in BOM component explosure . like in CS11 , CS12  ( Urgent )

    Hello all,
    i have all the material and the components for the material in an internal table .
    Now i am not getting the logic for getting the level number of the component.
    Now i am having the data in an internal table as in CS11 ,with out the yellow record which represents the header of the components .
    And i am using the funtion module 'CSAP_MAT_BOM_READ'
    BOM Header Material 1111 has the components 1121 and 1122. These components are at level 1
    Component 1121 is a BOM Header as well and contains the components 1311, 1312 and 1313. These components are at level 2.
    Component 1313 is a BOM Header as well and contains the components 1141,
    i am getting out put as
    material   component
    1111              1121
    1111              1122
    1111              1311
    1111              1312
    1111              1313
    1111              1141
    along with this i want the level number ...
    Can any one please help me on this .
    Thanks and regards ,
    Prem

    Use function module CS_BOM_EXPL_MAT_V2, and in the import parameter set the MEHRS to 'X" 9 Set Multi level explosion to true.
    Like this -
      CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
           EXPORTING
                CAPID                 = C_CAPID 
                DATUV                 = P_DATUV
                MTNRV                 = T_MAST-MATNR
                STLAL                 = T_MAST-STLAL
                STLAN                 = T_MAST-STLAN
                WERKS                 = T_MAST-WERKS
                MEHRS              = 'X'
           TABLES
                STB                   = T_STB
           EXCEPTIONS
                ALT_NOT_FOUND         = 1
                CALL_INVALID          = 2
                MATERIAL_NOT_FOUND    = 3
                MISSING_AUTHORIZATION = 4
                NO_BOM_FOUND          = 5
                NO_PLANT_DATA         = 6
                NO_SUITABLE_BOM_FOUND = 7
                CONVERSION_ERROR      = 8
                OTHERS                = 9.

  • URGENT: Function modules or BAPIs

    Hi Experts,
    I need function modules or BAPI to get the open items and cleared items G/L Account wise.
    Useful replies will be surely awarded.

    Hi Chakradhar,
    Check tcode : BAPI
    u will get all bapis there.
    Regards,
    Hemant

  • How to attached class or function module in FD03

    Hi Guys
    I want to attached CL_ATTACHMENT_LIST for retriving attachment list from fd03 please help to attached the function module in my program?
    regards
    Piroz
    report zfir_aged_debtors no standard page heading
                             line-size 255.
    Type group
    type-pools:
      slis.                        " ALV types
    Tables
    tables:
      adrc,               " Addresses
      bsad,               " Accounting: Customer secondary index (Cleared)
      bsid,               " Accounting: Customer secondary index (Open)
      kna1,               " Customer master: General data
      knkk,               " Customer master: Credit management
      knvk.               " Customer master: Contact persons
    Types
    types:
      begin of ty_bsadbsid,
        bukrs like bsad-bukrs,              " Company code
        kunnr like bsad-kunnr,              " Customer
        gjahr like bsad-gjahr,              " Fiscal year
        belnr like bsad-belnr,              " Accounting document number
        buzei like bsad-buzei,              " Line item
        budat like bsad-budat,              " Posting date
        bldat like bsad-bldat,              " Document date
        waers like bsad-waers,              " Currency
        xblnr like bsad-xblnr,              " Reference
        shkzg like bsad-shkzg,              " Debit/credit indicator
        dmbtr like bsad-dmbtr,              " Amount
        zfbdt like bsad-zfbdt,              " Baseline date for due date
                                            " calculation
        zbd1t like bsad-zbd1t,              " Cash discount days 1
        zbd2t like bsad-zbd2t,              " Cash discount days 2
        zbd3t like bsad-zbd3t,              " Net payment terms period
        rebzg like bsad-rebzg,              " Number of the invoice
        rebzt like bsad-rebzt,              " Follow on document type
      end of ty_bsadbsid,
      ty_it_bsadbsid type ty_bsadbsid occurs 0,
      begin of ty_merged,
        kunnr      like kna1-kunnr,         " Customer number
        name1      like adrc-name1,         " Name
        city1      like adrc-city1,         " City
        post_code1 like adrc-post_code1,    " Post code
        street     like adrc-street,        " Street
        house_num1 like adrc-house_num1,    " House number
        tel_number like adrc-tel_number,    " Telephone number
        fax_number like adrc-fax_number,    " Fax number
        namev      like knvk-namev,         " First name
        namew      like knvk-name1,         " Last name
        telf1      like knvk-telf1,         " Telephone number
        klimk      like knkk-klimk,         " Credit limit
        skfor      like knkk-skfor,         " Total receivables
        total      like bsad-dmbtr,         " Total amount
        rast1      like bsad-dmbtr,         " Amount period 1
        rast2      like bsad-dmbtr,         " Amount period 2
        rast3      like bsad-dmbtr,         " Amount period 3
        rast4      like bsad-dmbtr,         " Amount period 4
        rast5      like bsad-dmbtr,         " Amount period 5
        rast6      like bsad-dmbtr,         " Amount period 6
      end of ty_merged,
      ty_it_merged type ty_merged occurs 0.
    Internal tables
    data:
    Internal table to store customer line items from BSAD and BSID
      it_bsadbsid type ty_it_bsadbsid,
    Internal table to store field catalog for ALV function call
      it_fieldcat type slis_t_fieldcat_alv,
    Internal table to store summarised data for report output
      it_merged   type ty_it_merged.
    Structures
    data:
    Display variant structures
      st_tvariant  like disvariant,
      st_variant   like disvariant.
    Constants
    constants:
      co_delim_dash    type c
                       value '-',
      co_false         type c                      " False
                       value space,
      co_koart_d       like faede-koart            " Customer account type
                       value 'D',
      co_save_u        type c                      " User display variant
                       value 'U',                  " saving allowed.
      co_shkzg_h       like bsid-shkzg             " Debit/Credit indicator
                       value 'H',                  " for credit
      co_shkzg_s       like bsid-shkzg             " Debit/Credit indicator
                       value 'S',                  " for debit
      co_selected      type c                      " Value of selected radio
                       value 'X',                  " button or checkbox
      co_true          type c                      " True
                       value co_selected.
    Variables
    data:
      va_exit          type c.
    Selection screen definition
    selection-screen: begin of block b1 with frame title text-001.
    select-options:
      s_kunnr for bsad-kunnr.                     " Customer number
    parameters:
      p_kkber like knkk-kkber,                    " Credit control area
      p_pafkt like knvk-pafkt,                    " Contact function
      p_datum like sy-datum.                      " Report date
    selection-screen: begin of line,
                      comment 01(30) text-006,
                      position pos_low.
    parameters:
      rastbis1 like rfpdo1-allgrogr               " Due date sorted 1
               default '000',
      rastbis2 like rfpdo1-allgrogr               " Due date sorted 2
               default '000',
      rastbis3 like rfpdo1-allgrogr               " Due date sorted 3
               default '000',
      rastbis4 like rfpdo1-allgrogr               " Due date sorted 4
               default '000',
      rastbis5 like rfpdo1-allgrogr               " Due date sorted 5
               default '000'.
    selection-screen: end of line.
    selection-screen: end of block b1,
                      begin of block b2 with frame title text-002.
    parameters:
      p_varint like disvariant-variant.           " Display variant.
    selection-screen: end of block b2.
    Initialisation
    initialization.
    Provide default periods for due date sorted list.
      rastbis1 = 0.
      rastbis2 = 30.
      rastbis3 = 60.
      rastbis4 = 90.
      rastbis5 = 120.
    Default report date to current.
      p_datum = sy-datlo.
    Default credit control area to BP01.
      p_kkber = 'BP01'.
    At selection screen on value request for
    at selection-screen on value-request for p_varint.
    Provide display variant list for this program.
      call function 'REUSE_ALV_VARIANT_F4'
        exporting
          is_variant = st_variant
          i_save     = co_save_u
        importing
          e_exit     = va_exit
          es_variant = st_tvariant
        exceptions
          not_found  = 2.
      if sy-subrc eq 2.
        message id sy-msgid type 'S'
                number sy-msgno
                with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      else.
        if va_exit eq space.
          st_variant = st_tvariant.
          p_varint = st_tvariant-variant.
        endif.
      endif.
    At selection screen
    at selection-screen.
    Load display variant.
      if not p_varint is initial.
        move st_variant to st_tvariant.
        move p_varint to st_tvariant-variant.
        call function 'REUSE_ALV_VARIANT_EXISTENCE'
          exporting
            i_save     = co_save_u
          changing
            cs_variant = st_tvariant.
        st_variant = st_tvariant.
      else.
        clear st_variant.
        st_variant-report = sy-repid.
      endif.
      if p_kkber is initial.
      Ensure credit control area is specified.
        message e000(zgen) with 'Credit control area must be specified'.
      endif.
      if p_pafkt is initial.
      Ensure contact person function is specified.
        message e000(zgen) with 'Contact person function must be specified'.
      endif.
    Start of selection
    start-of-selection.
    Extract open customer items from BSID
      select bukrs kunnr gjahr belnr buzei budat bldat waers xblnr shkzg
             dmbtr zfbdt zbd1t zbd2t zbd3t rebzg rebzt
             from  bsid
             into  table it_bsadbsid
             where kunnr in s_kunnr
             and   budat le p_datum.
    Extracct cleared customer items from BSAD
      select bukrs kunnr gjahr belnr buzei budat bldat waers xblnr shkzg
             dmbtr zfbdt zbd1t zbd2t zbd3t rebzg rebzt
             from  bsad
             appending table it_bsadbsid
             where kunnr in s_kunnr
             and   budat le p_datum
             and   augdt ge p_datum.
    Ensure that items were not selected twice while getting data from the
    open and cleared items tables (Only if transaction occured during
    report run).
      sort it_bsadbsid by bukrs belnr gjahr buzei.
      delete adjacent duplicates from it_bsadbsid
             comparing bukrs belnr gjahr buzei.
      if it_bsadbsid[] is initial.
      No data found for selection
        message s001(zgen).
        exit.
      endif.
    Merge data for report output
      perform merge_data tables it_bsadbsid
                                it_merged.
    Build field catalog
      perform build_field_catalog tables it_fieldcat.
    Output report via ALV
      perform output_report_via_alv tables it_fieldcat
                                           it_merged.
    *&      Form  merge_data
          text
    form merge_data  tables   pa_it_bsadbsid type ty_it_bsadbsid
                              pa_it_merged   type ty_it_merged.
    Local work areas
    data:
      lwa_bsadbsid type ty_bsadbsid,
      lwa_merged   type ty_merged.
    Local structures
    data:
      lst_faede    like faede.
    Local variables
    data:
      lva_daysover type i,
      lva_merged_tabix like sy-tabix.
      loop at pa_it_bsadbsid into lwa_bsadbsid.
      Lookup merged entry for customer
        clear lwa_merged.
        read table pa_it_merged into lwa_merged
                                with key kunnr = lwa_bsadbsid-kunnr
                                binary search.
        lva_merged_tabix = sy-tabix.
        if sy-subrc ne 0.
        Create new merged record for customer
          lwa_merged-kunnr = lwa_bsadbsid-kunnr.
        Get customer details from KNA1
          clear kna1.
          select single *
                 from   kna1
                 where  kunnr eq lwa_bsadbsid-kunnr.
        Get customer address details from ADRC
          clear adrc.
          select single *
                 from   adrc
                 where  addrnumber eq kna1-adrnr
                 and    date_from  le p_datum.
          lwa_merged-name1      = adrc-name1.
          lwa_merged-city1      = adrc-city1.
          lwa_merged-post_code1 = adrc-post_code1.
          lwa_merged-street     = adrc-street.
          lwa_merged-house_num1 = adrc-house_num1.
          lwa_merged-tel_number = adrc-tel_number.
          lwa_merged-fax_number = adrc-fax_number.
        Get credit limit details from KNKK
          clear knkk.
          select single *
                 from   knkk
                 where  kunnr eq lwa_bsadbsid-kunnr
                 and    kkber eq p_kkber.
          lwa_merged-klimk = knkk-klimk.
          lwa_merged-skfor = knkk-skfor.
        Get customer contact person details from KNVK
          clear knvk.
          select single *
                 from   knvk
                 where  kunnr eq lwa_bsadbsid-kunnr
                 and    pafkt eq p_pafkt.
          lwa_merged-namev = knvk-namev.
          lwa_merged-namew = knvk-name1.
          lwa_merged-telf1 = knvk-telf1.
          insert lwa_merged into pa_it_merged index lva_merged_tabix.
        endif.
      Interpret debit/credit indicator
        case lwa_bsadbsid-shkzg.
          when co_shkzg_h.
          Credit
            lwa_bsadbsid-dmbtr = 0 - lwa_bsadbsid-dmbtr.
          when co_shkzg_s.
          Debit
        endcase.
      Perform ageing
        clear lst_faede.
        move-corresponding lwa_bsadbsid to lst_faede.
        lst_faede-koart = co_koart_d.
        call function 'DETERMINE_DUE_DATE'
          exporting
            i_faede = lst_faede
          importing
            e_faede = lst_faede
          exceptions
            others  = 1.
        lva_daysover = p_datum - lst_faede-netdt.
      Accumulate total.
        add lwa_bsadbsid-dmbtr to lwa_merged-total.
        if lva_daysover le rastbis1.
          add lwa_bsadbsid-dmbtr to lwa_merged-rast1.
        else.
          if lva_daysover le rastbis2 or
             rastbis3 is initial.
            add lwa_bsadbsid-dmbtr to lwa_merged-rast2.
          else.
            if lva_daysover le rastbis3 or
               rastbis4 is initial.
              add lwa_bsadbsid-dmbtr to lwa_merged-rast3.
            else.
              if lva_daysover le rastbis4 or
                 rastbis5 is initial.
                add lwa_bsadbsid-dmbtr to lwa_merged-rast4.
              else.
                if lva_daysover le rastbis5.
                  add lwa_bsadbsid-dmbtr to lwa_merged-rast5.
                else.
                  add lwa_bsadbsid-dmbtr to lwa_merged-rast6.
                endif.
              endif.
            endif.
          endif.
        endif.
      Update the merged record
        modify pa_it_merged from lwa_merged index lva_merged_tabix.
      endloop.
    endform.                    " merge_data
    *&      Form  build_field_catalog
          text
    form build_field_catalog tables pa_it_fieldcat type slis_t_fieldcat_alv.
    Local work areas
      data:
        lwa_fieldcat   type slis_fieldcat_alv.
    --WG1K903216: Start Insert-
      data: v_datum type datum,
            v_mdmth type datum,
            v_datxt type string,
            v_noday type i.
    --WG1K903216: End Insert---
      refresh pa_it_fieldcat.
      clear lwa_fieldcat.
      lwa_fieldcat-tabname       = 'PA_IT_MERGED'.
      lwa_fieldcat-fieldname     = 'KUNNR'.
      lwa_fieldcat-ref_tabname   = 'KNA1'.
      lwa_fieldcat-ref_fieldname = 'KUNNR'.
      lwa_fieldcat-row_pos       = '1'.
      lwa_fieldcat-col_pos       = '1'.
      append lwa_fieldcat to pa_it_fieldcat.
      clear lwa_fieldcat.
      lwa_fieldcat-tabname       = 'PA_IT_MERGED'.
      lwa_fieldcat-fieldname     = 'NAME1'.
      lwa_fieldcat-ref_tabname   = 'ADRC'.
      lwa_fieldcat-ref_fieldname = 'NAME1'.
      lwa_fieldcat-row_pos       = '1'.
      lwa_fieldcat-col_pos       = '2'.
      append lwa_fieldcat to pa_it_fieldcat.
      clear lwa_fieldcat.
      lwa_fieldcat-tabname       = 'PA_IT_MERGED'.
      lwa_fieldcat-fieldname     = 'CITY1'.
      lwa_fieldcat-ref_tabname   = 'ADRC'.
      lwa_fieldcat-ref_fieldname = 'CITY1'.
      lwa_fieldcat-row_pos       = '1'.
      lwa_fieldcat-col_pos       = '3'.
      append lwa_fieldcat to pa_it_fieldcat.
      clear lwa_fieldcat.
      lwa_fieldcat-tabname       = 'PA_IT_MERGED'.
      lwa_fieldcat-fieldname     = 'POST_CODE1'.
      lwa_fieldcat-ref_tabname   = 'ADRC'.
      lwa_fieldcat-ref_fieldname = 'POST_CODE1'.
      lwa_fieldcat-row_pos       = '1'.
      lwa_fieldcat-col_pos       = '4'.
      append lwa_fieldcat to pa_it_fieldcat.
      clear lwa_fieldcat.
      lwa_fieldcat-tabname       = 'PA_IT_MERGED'.
      lwa_fieldcat-fieldname     = 'STREET'.
      lwa_fieldcat-ref_tabname   = 'ADRC'.
      lwa_fieldcat-ref_fieldname = 'STREET'.
      lwa_fieldcat-row_pos       = '1'.
      lwa_fieldcat-col_pos       = '5'.
      append lwa_fieldcat to pa_it_fieldcat.
      clear lwa_fieldcat.
      lwa_fieldcat-tabname       = 'PA_IT_MERGED'.
      lwa_fieldcat-fieldname     = 'HOUSE_NUM1'.
      lwa_fieldcat-ref_tabname   = 'ADRC'.
      lwa_fieldcat-ref_fieldname = 'HOUSE_NUM1'.
      lwa_fieldcat-row_pos       = '1'.
      lwa_fieldcat-col_pos       = '6'.
      append lwa_fieldcat to pa_it_fieldcat.
      clear lwa_fieldcat.
      lwa_fieldcat-tabname       = 'PA_IT_MERGED'.
      lwa_fieldcat-fieldname     = 'TEL_NUMBER'.
      lwa_fieldcat-ref_tabname   = 'ADRC'.
      lwa_fieldcat-ref_fieldname = 'TEL_NUMBER'.
      lwa_fieldcat-row_pos       = '1'.
      lwa_fieldcat-col_pos       = '7'.
      append lwa_fieldcat to pa_it_fieldcat.
      clear lwa_fieldcat.
      lwa_fieldcat-tabname       = 'PA_IT_MERGED'.
      lwa_fieldcat-fieldname     = 'FAX_NUMBER'.
      lwa_fieldcat-ref_tabname   = 'ADRC'.
      lwa_fieldcat-ref_fieldname = 'FAX_NUMBER'.
      lwa_fieldcat-row_pos       = '1'.
      lwa_fieldcat-col_pos       = '8'.
      append lwa_fieldcat to pa_it_fieldcat.
      clear lwa_fieldcat.
      lwa_fieldcat-tabname       = 'PA_IT_MERGED'.
      lwa_fieldcat-fieldname     = 'NAMEV'.
      lwa_fieldcat-ref_tabname   = 'KNVK'.
      lwa_fieldcat-ref_fieldname = 'NAMEV'.
      lwa_fieldcat-row_pos       = '1'.
      lwa_fieldcat-col_pos       = '9'.
      lwa_fieldcat-seltext_l     = 'Contact first name'.
      lwa_fieldcat-seltext_m     = 'Contact Fname'.
      lwa_fieldcat-seltext_s     = 'Ctct Fname'.
      lwa_fieldcat-ddictxt       = 'L'.
      append lwa_fieldcat to pa_it_fieldcat.
      clear lwa_fieldcat.
      lwa_fieldcat-tabname       = 'PA_IT_MERGED'.
      lwa_fieldcat-fieldname     = 'NAMEW'.
      lwa_fieldcat-ref_tabname   = 'KNVK'.
      lwa_fieldcat-ref_fieldname = 'NAME1'.
      lwa_fieldcat-row_pos       = '1'.
      lwa_fieldcat-col_pos       = '10'.
      lwa_fieldcat-seltext_l     = 'Contact last name'.
      lwa_fieldcat-seltext_m     = 'Contact Lname'.
      lwa_fieldcat-seltext_s     = 'Ctxt Lname'.
      lwa_fieldcat-ddictxt       = 'L'.
      append lwa_fieldcat to pa_it_fieldcat.
      clear lwa_fieldcat.
      lwa_fieldcat-tabname       = 'PA_IT_MERGED'.
      lwa_fieldcat-fieldname     = 'TELF1'.
      lwa_fieldcat-ref_tabname   = 'KNVK'.
      lwa_fieldcat-ref_fieldname = 'TELF1'.
      lwa_fieldcat-row_pos       = '1'.
      lwa_fieldcat-col_pos       = '11'.
      lwa_fieldcat-seltext_l     = 'Contact phone no.'.
      lwa_fieldcat-seltext_m     = 'Contact phone'.
      lwa_fieldcat-seltext_s     = 'Ctct Phne'.
      lwa_fieldcat-ddictxt       = 'L'.
      append lwa_fieldcat to pa_it_fieldcat.
      clear lwa_fieldcat.
      lwa_fieldcat-tabname       = 'PA_IT_MERGED'.
      lwa_fieldcat-fieldname     = 'KLIMK'.
      lwa_fieldcat-ref_tabname   = 'KNKK'.
      lwa_fieldcat-ref_fieldname = 'KLIMK'.
      lwa_fieldcat-row_pos       = '1'.
      lwa_fieldcat-col_pos       = '12'.
      lwa_fieldcat-seltext_l     = 'Credit limit'.
      lwa_fieldcat-seltext_m     = 'Credit limit'.
      lwa_fieldcat-seltext_s     = 'Crdt limit'.
      lwa_fieldcat-ddictxt       = 'L'.
      append lwa_fieldcat to pa_it_fieldcat.
      clear lwa_fieldcat.
      lwa_fieldcat-tabname       = 'PA_IT_MERGED'.
      lwa_fieldcat-fieldname     = 'SKFOR'.
      lwa_fieldcat-ref_tabname   = 'KNKK'.
      lwa_fieldcat-ref_fieldname = 'SKFOR'.
      lwa_fieldcat-row_pos       = '1'.
      lwa_fieldcat-col_pos       = '13'.
      lwa_fieldcat-seltext_l     = 'Credit used'.
      lwa_fieldcat-seltext_m     = 'Credit used'.
      lwa_fieldcat-seltext_s     = 'Crdt used'.
      lwa_fieldcat-ddictxt       = 'L'.
      append lwa_fieldcat to pa_it_fieldcat.
      clear lwa_fieldcat.
      lwa_fieldcat-tabname       = 'PA_IT_MERGED'.
      lwa_fieldcat-fieldname     = 'TOTAL'.
      lwa_fieldcat-ref_tabname   = 'BSAD'.
      lwa_fieldcat-ref_fieldname = 'DMBTR'.
      lwa_fieldcat-row_pos       = '1'.
      lwa_fieldcat-col_pos       = '14'.
      lwa_fieldcat-seltext_l     = 'Total'.
      lwa_fieldcat-seltext_m     = 'Total'.
      lwa_fieldcat-seltext_s     = 'Total'.
      lwa_fieldcat-ddictxt       = 'L'.
      append lwa_fieldcat to pa_it_fieldcat.
      clear lwa_fieldcat.
      lwa_fieldcat-tabname       = 'PA_IT_MERGED'.
      lwa_fieldcat-fieldname     = 'RAST1'.
      lwa_fieldcat-ref_tabname   = 'BSAD'.
      lwa_fieldcat-ref_fieldname = 'DMBTR'.
      lwa_fieldcat-row_pos       = '1'.
      lwa_fieldcat-col_pos       = '15'.
    --WG1K903216: Start Delete-
    concatenate '<'
                 rastbis2
                 into lwa_fieldcat-seltext_l
                 separated by space.
    --WG1K903216: End Delete---
    --WG1K903216: Start Insert-
      clear: v_datum,
             v_datxt.
      v_noday = rastbis2.
    Always use the middle of the report month as a heading reference date.
      concatenate p_datum+0(6) '15' into v_mdmth.
      call function 'ZWAG_DATE_CALCULATOR'
        exporting  i_datum         = v_mdmth
                   i_noday         = v_noday
                   i_oprnd         = '+'
        importing  e_datum         = v_datum
        exceptions invalid_operand = 1.
      call function 'ZWAG_END_MONTH'
        exporting  i_datum         = v_datum
        importing  e_datum         = v_datum
                   e_datxt         = v_datxt
        exceptions invalid_date    = 1.
      concatenate 'Due' v_datxt into lwa_fieldcat-seltext_l
        separated by space.
    --WG1K903216: End Insert---
      lwa_fieldcat-seltext_m     = lwa_fieldcat-seltext_l.
      lwa_fieldcat-seltext_s     = lwa_fieldcat-seltext_l.
      lwa_fieldcat-ddictxt       = 'L'.
      append lwa_fieldcat to pa_it_fieldcat.
      clear lwa_fieldcat.
      lwa_fieldcat-tabname       = 'PA_IT_MERGED'.
      lwa_fieldcat-fieldname     = 'RAST2'.
      lwa_fieldcat-ref_tabname   = 'BSAD'.
      lwa_fieldcat-ref_fieldname = 'DMBTR'.
      lwa_fieldcat-row_pos       = '1'.
      lwa_fieldcat-col_pos       = '16'.
    --WG1K903216: Start Delete-
    concatenate rastbis1
                 rastbis2
                 into lwa_fieldcat-seltext_l
                 separated by co_delim_dash.
    --WG1K903216: End Delete---
    --WG1K903216: Start Insert-
      clear: v_datum,
             v_datxt.
      v_noday = rastbis1.
      call function 'ZWAG_DATE_CALCULATOR'
        exporting  i_datum         = v_mdmth
                   i_noday         = v_noday
                   i_oprnd         = '+'
        importing  e_datum         = v_datum
        exceptions invalid_operand = 1.
      call function 'ZWAG_END_MONTH'
        exporting  i_datum         = v_datum
        importing  e_datum         = v_datum
                   e_datxt         = v_datxt
        exceptions invalid_date    = 1.
      concatenate 'Due' v_datxt into lwa_fieldcat-seltext_l
        separated by space.
    --WG1K903216: End Insert---
      lwa_fieldcat-seltext_m     = lwa_fieldcat-seltext_l.
      lwa_fieldcat-seltext_s     = lwa_fieldcat-seltext_l.
      lwa_fieldcat-ddictxt       = 'L'.
      append lwa_fieldcat to pa_it_fieldcat.
      clear lwa_fieldcat.
      lwa_fieldcat-tabname       = 'PA_IT_MERGED'.
      lwa_fieldcat-fieldname     = 'RAST3'.
      lwa_fieldcat-ref_tabname   = 'BSAD'.
      lwa_fieldcat-ref_fieldname = 'DMBTR'.
      lwa_fieldcat-row_pos       = '1'.
      lwa_fieldcat-col_pos       = '17'.
    --WG1K903216: Start Delete-
    concatenate rastbis2
                 rastbis3
                 into lwa_fieldcat-seltext_l
                 separated by co_delim_dash.
    --WG1K903216: End Delete---
    --WG1K903216: Start Insert-
      clear: v_datum,
             v_datxt.
      v_noday = rastbis2.
      call function 'ZWAG_DATE_CALCULATOR'
        exporting  i_datum         = v_mdmth
                   i_noday         = v_noday
                   i_oprnd         = '-'
        importing  e_datum         = v_datum
        exceptions invalid_operand = 1.
      call function 'ZWAG_END_MONTH'
        exporting  i_datum         = v_datum
        importing  e_datum         = v_datum
                   e_datxt         = v_datxt
        exceptions invalid_date    = 1.
      concatenate 'Due' v_datxt into lwa_fieldcat-seltext_l
        separated by space.
    --WG1K903216: End Insert---
      lwa_fieldcat-seltext_m     = lwa_fieldcat-seltext_l.
      lwa_fieldcat-seltext_s     = lwa_fieldcat-seltext_l.
      lwa_fieldcat-ddictxt       = 'L'.
      append lwa_fieldcat to pa_it_fieldcat.
      clear lwa_fieldcat.
      lwa_fieldcat-tabname       = 'PA_IT_MERGED'.
      lwa_fieldcat-fieldname     = 'RAST4'.
      lwa_fieldcat-ref_tabname   = 'BSAD'.
      lwa_fieldcat-ref_fieldname = 'DMBTR'.
      lwa_fieldcat-row_pos       = '1'.
      lwa_fieldcat-col_pos       = '18'.
    --WG1K903216: Start Delete-
    concatenate rastbis3
                 rastbis4
                 into lwa_fieldcat-seltext_l
                 separated by co_delim_dash.
    --WG1K903216: End Delete---
    --WG1K903216: Start Insert-
      clear: v_datum,
             v_datxt.
      v_noday = rastbis3.
      call function 'ZWAG_DATE_CALCULATOR'
        exporting  i_datum         = v_mdmth
                   i_noday         = v_noday
                   i_oprnd         = '-'
        importing  e_datum         = v_datum
        exceptions invalid_operand = 1.
      call function 'ZWAG_END_MONTH'
        exporting  i_datum         = v_datum
        importing  e_datum         = v_datum
                   e_datxt         = v_datxt
        exceptions invalid_date    = 1.
      concatenate 'Due' v_datxt into lwa_fieldcat-seltext_l
        separated by space.
    --WG1K903216: End Insert---
      lwa_fieldcat-seltext_m     = lwa_fieldcat-seltext_l.
      lwa_fieldcat-seltext_s     = lwa_fieldcat-seltext_l.
      lwa_fieldcat-ddictxt       = 'L'.
      append lwa_fieldcat to pa_it_fieldcat.
      clear lwa_fieldcat.
      lwa_fieldcat-tabname       = 'PA_IT_MERGED'.
      lwa_fieldcat-fieldname     = 'RAST5'.
      lwa_fieldcat-ref_tabname   = 'BSAD'.
      lwa_fieldcat-ref_fieldname = 'DMBTR'.
      lwa_fieldcat-row_pos       = '1'.
      lwa_fieldcat-col_pos       = '19'.
    --WG1K903216: Start Delete-
    concatenate rastbis4
                 rastbis5
                 into lwa_fieldcat-seltext_l
                 separated by co_delim_dash.
    --WG1K903216: End Delete---
    --WG1K903216: Start Insert-
      clear: v_datum,
             v_datxt.
      v_noday = rastbis4.
      call function 'ZWAG_DATE_CALCULATOR'
        exporting  i_datum         = v_mdmth
                   i_noday         = v_noday
                   i_oprnd         = '-'
        importing  e_datum         = v_datum
        exceptions invalid_operand = 1.
      call function 'ZWAG_END_MONTH'
        exporting  i_datum         = v_datum
        importing  e_datum         = v_datum
                   e_datxt         = v_datxt
        exceptions invalid_date    = 1.
      concatenate 'Due' v_datxt into lwa_fieldcat-seltext_l
        separated by space.
    --WG1K903216: End Insert---
      lwa_fieldcat-seltext_m     = lwa_fieldcat-seltext_l.
      lwa_fieldcat-seltext_s     = lwa_fieldcat-seltext_l.
      lwa_fieldcat-ddictxt       = 'L'.
      append lwa_fieldcat to pa_it_fieldcat.
      clear lwa_fieldcat.
      lwa_fieldcat-tabname       = 'PA_IT_MERGED'.
      lwa_fieldcat-fieldname     = 'RAST6'.
      lwa_fieldcat-ref_tabname   = 'BSAD'.
      lwa_fieldcat-ref_fieldname = 'DMBTR'.
      lwa_fieldcat-row_pos       = '1'.
      lwa_fieldcat-col_pos       = '20'.
    --WG1K903216: Start Delete-
    concatenate '>'
                 rastbis5
                 into lwa_fieldcat-seltext_l
                 separated by space.
    --WG1K903216: End Delete---
    --WG1K903216: Start Insert-
      clear: v_datum,
             v_datxt.
      v_noday = rastbis5.
      call function 'ZWAG_DATE_CALCULATOR'
        exporting  i_datum         = v_mdmth
                   i_noday         = v_noday
                   i_oprnd         = '-'
        importing  e_datum         = v_datum
        exceptions invalid_operand = 1.
      call function 'ZWAG_END_MONTH'
        exporting  i_datum         = v_datum
        importing  e_datum         = v_datum
                   e_datxt         = v_datxt
        exceptions invalid_date    = 1.
      concatenate 'Due By' v_datxt into lwa_fieldcat-seltext_l
        separated by space.
    --WG1K903216: End Insert---
      lwa_fieldcat-seltext_m     = lwa_fieldcat-seltext_l.
      lwa_fieldcat-seltext_s     = lwa_fieldcat-seltext_l.
      lwa_fieldcat-ddictxt       = 'L'.
      append lwa_fieldcat to pa_it_fieldcat.
    endform.                    " build_field_catalog
    *&      Form  output_report_via_alv
          text
    form output_report_via_alv
                        tables pa_it_fieldcat type slis_t_fieldcat_alv
                               pa_it_merged   type ty_it_merged.
    Local variables
      data:
        lva_repid    like sy-repid,
        lva_formname type slis_formname.
      lva_repid = sy-repid.
      lva_formname = 'USER_COMMAND'.
      call function 'REUSE_ALV_GRID_DISPLAY'
        exporting
          i_callback_program      = lva_repid
          i_callback_user_command = lva_formname
          i_save                  = 'A'
          is_variant              = st_variant
          it_fieldcat             = pa_it_fieldcat[]
        tables
          t_outtab                = pa_it_merged
        exceptions
          program_error           = 1
          others                  = 2.
    endform.                    " output_report_via_alv

    Hi shiva
    Thanks for your help,
    Can you check this coding and revert me back ASAP Please.
    REPORT BDS_GOS_CONNECTION.
    DATA : logical_system LIKE BAPIBDS01-log_system.
           CLASSNAME LIKE BAPIBDS01-CLASSNAME
           OBJKEY LIKE SWOTOBJID-objkey.
    PARAMETERS: pa_lo_sys BAPIBDS01-log_system,
                pa_class like BPIBDS01-CLASSNAME,
                pa_objkey like swotobjidobjkey.
    AT SELECTION-SCREEN.
    CALL FUNCTION 'BDS_GOS_CONNECTIONS_GET'
             EXPORTING
                  bor_id             = bor_id
             IMPORTING
                  logical_sytem      = pa_lo_sys.
                  classname          = pa_class.
                  objkey            = pa_objkey.
             EXCEPTIONS
                  no_objects_found     = 1
                  internal_error       = 2
                  internal_gos_error   = 3.
       IF sy-subrc <> 0.
         MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
       ENDIF.
    clear v_attno1.
    i_object1-typeid = 'BUS2012'.
    i_object1-catid  = 'BO'.
    i_object1-instid = i_yItem-docno.
    call method cl_gos_attachment_query=>count_for_object
       exporting
        is_object = i_object1
        ip_arl    = space
       receiving
        rt_stat   = i_stat1.
    read table i_stat1 into wa_stat1 index 1.
    if sy-subrc eq c_0.
        move wa_stat1-counter to v_attno1.
    endif.             
    CALL METHOD cl_gos_attachment_query=>count_for_object
    EXPORTING
    is_object = object
    ip_arl =    space
    RECEIVING
    rt_stat = lt_stat.
    READ TABLE lt_stat INDEX 1 into ls_stat.
    count = ls_stat-counter.
    *The object has to be a concatenation of your document, like this:
    CONCATENATE object-instid tab-gjahr INTO object-instid.
    ELSE.
    CONCATENATE tab-bukrs tab-belnr tab-gjahr INTO
    object-instid.
    ENDIF.

  • Function Module to Release Scheduled Jobs

    Dear All,
    I have a requirement to create all the background jobs in SCHEDULED status, this is achieved by using the function modules JOB_OPEN, JOB_SUBMIT and JOB_CLOSE.
    Now at a later point of time, i want to release only a few jobs, which were created using the above mentioned procedure. Insead of doing it manually, is there any way to automate this step ??
    Regards,
    kartik

    Dear Mr. Parupalli,
    That solved my problem. Thank you.
    Regards,
    kartik

  • Call RFC Function Module and return 1000 records at a time

    I would like to call a Remote Enabled Function Module from a non SAP system.  This function module will select data from the database and return it to the calling program.
    Suppose there are 100,000 records that need to be returned, but the calling module would like the data in chunks of 1000 records.  Therefore the calling program would call the FM 100 times. 
    How do I code the function module to know on each subsequent call to grab the next chunk of 1000 records? 
    Let me know if additional information is needed.
    Thanks,
    Aaron

    Hello,
    Here is how you can go for this issue:
    1. Create one RFC function module with following parameter. These parameters are with respective of chunking logic.
         Import: Package Size
         Export: Total number of records
         Changing: chunk count
    Implement following logic:
    1. First of you need to know how many chunks you need to fetch for that get the count of total number of records. This is one  
        time activity so you better maintain one flag import parameter will be set to 'X' only first call.
    2. Get the number of chunk using total number of records / chunk size for e.g. 1000 / 100 so chunk count = 10.
    3. Define internal chunk counter in function module which will be used to locate the correct chunk depending on the chunk
        counter value sent from calling program.
    4. Send first call with package size 100 and chunk count = 1, execute select statement and increment internal
        chunk count check if chunk count = internal chunk count in current case chunk count = 1 so exit select statement and return
        with first chunk.
    5. Send second call with package size 100 and chunk count = 2. Execute select statement and check chunk count with internal
        chunk counter, in current case it will be 1 so skip that data and go for next chunk of 100 records increment internal chunk  
        counter. In this case it will match with external chunk count = 2. load output table with that data and return to calling program.
    6. Repeat step 4 until you reach last chunk.
    You need to use SELECT...ENDSELECT with PACKAGE SIZE addition so for every loop it will return number of records mentioned in package size.
    Hope this helps.
    Thanks,
    Augustin.

  • Error while passing a table to a function module

    Hi Iam passing a table g_tab of length 376 flat structure to the function module..under TABLES section parameter.
    Changedocument_read_headers.
    iam getting a complile time error like the below displayed thing. Can u tell me how to solve this ?
    In the function module interface, you can specify only
    fields of a specific type and length under "I_CDHDR".
    Although the currently specified field
    "G_CDHDR_TAB" is the correct type, its length is incorrect.
    Edited by: kiran kumar on Jul 7, 2008 8:53 AM

    probably u making a mistake while declaring the table
    declare it like this in the tables section:
    S_JOB     LIKE     RNGE_OBJID
    where s_job is the internal table name and RANGE_OBJID is a structure type and NOT an internal table type.

  • RFC Error While Invoking A Remote Function Module.

    I am invoking A remote function module while invoking it get  an exception when i see the error logs
    com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException:      Screen output without connection to user.                           , error key: RFC_ERROR_SYSTEM_FAILURE at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101) at... [see details]
    can anyone pls tell me what the error is..
    regards
    Nilesh Taunk.

    Hi Nilesh Taunk,
    You can go through the following steps
    -o JCO Exceptions 1. http://help.sap.com/saphelp_nw04s/helpdata/en/f6/daea401675752ae10000000a155106/frameset.htm
    -o JCO Exceptions 2. http://help.sap.com/saphelp_nw04/helpdata/en/f6/e002416225f023e10000000a155106/frameset.htm
    -o Restart of the J2EE instance and try re-importing the RFC model. Sometimes it helps.
    -o Logon into WebDynpro Content Administrator as a J2EE Admin and check if the JCO Connections and User /pwd of your application is correct. You can <b>ping </b>or <b>test your JCO connections</b>. if something is wrong, enter the values again for JCO n retest them.
    -o Try undeploying or removing the complete application and redeploy it.
    Tu undeploy please go to
    Go to <b>Visual Admin -> Server -> Services -> Deploy ->
    </b>
    Under Runtime Tab
    select the server, open the tree , you would find the webdypro list there.
    Now select an application, first stop it, remove it and redeploy if necessary.
    Let us know if you could solve the problem or not, gud luck!
    Rgds,
    Sreenivas.

  • Error while generating Web Service from a function module.

    Hi Experts,
    I am trying to create a web service from function module by doing the steps as mentioned in the below document:
    http://www.sdn.sap.com/irj/scn/index;jsessionid=(J2EE3417800)ID1146834250DB10778842957931285337End?rid=/library/uuid/80fa3dff-ce76-2a10-3f94-f3df8f2db5a2&overridelayout=true
    When i save it as an local object instead of generating the Web Service it gives me the below error:
    "Error during activation of Web Service"
    Kindly let me know what needs to be done inorder to resolve this issue.
    I have a feeling that this error may be with respect to some authorizations, in that case how do we resolve it
    Helpful Inputs Awaited.!!!
    Thanks
    Dhwani

    Hi Dhawani,
    Hi Pavan,
    Can you please elaborate...how this will help??
    Thanks
    Dhwani
    I dont know the specific reason but internally there may some inconsistancy but i faced the same error and i tried with saving it in the package.
    Thanks

  • CNTL_ERROR while calling a function module from Java webdynpro

    I am calling a RFC function module from javawebdynpro app
    which inturn calls a function module performing BDC on CAPP transaction. When I run this from SE37 of the same system or a different system everything works fine. But when called from Java webdynpro app, it raises a CNTL_ERROR exception and creates a short dump.
    Any help on this is highly appreciated

    Good catch, BI Learner. This was exactly it: when assigning the values from SOURCEFIELDS directly to the import/export parameters, you have to make sure that the types are EXACTLY the same, otherwise it will not work (the routine stops with an error when calling the FM, but there is no dump).
    Therefore, to solve my problem, I created the declarations precisely as expected by the FM and assigned the values to these fields:
    DATA:
          SOURCEVAL TYPE  /BIC/OIINVQTY,
          SOURCEUOM TYPE  /BIC/OIUSUOM,
          USITM TYPE  /BIC/OIUSITM,
          TARGETUOM TYPE  /BIC/OIUSUOM,
          CONVERTED_COST TYPE  /BIC/OIINVQTY.
    DATA PRODUCTION_UOM TYPE /BIC/OIUSUOM.
    " get the Production UOM
        SELECT SINGLE I~/BIC/USPRDUOM
          FROM /BIC/PUSITM AS I
          INTO PRODUCTION_UOM
          WHERE I~/BIC/USITM = SOURCE_FIELDS-/BIC/USITM AND I~OBJVERS = 'A'.
        IF ( SY-SUBRC = 4 ). " no records found
          "RAISE PARTNO_NOT_FOUND.
          RAISE EXCEPTION TYPE CX_RSROUT_SKIP_RECORD.
        ENDIF.
    " load the parameters
        SOURCEVAL = SOURCE_FIELDS-/BIC/USFRZMFC.
        SOURCEUOM = SOURCE_FIELDS-BASE_UOM.
        USITM = SOURCE_FIELDS-/BIC/USITM.
    " then you can call the FM
        CALL FUNCTION 'Z_CA_CONVERT_US_COST'
          EXPORTING
            PSOURCEVAL                = SOURCEVAL
            PSOURCEUOM                = SOURCEUOM
            PUSITM                    = USITM
            PTARGETUOM                = PRODUCTION_UOM
          IMPORTING
            PTARGETVAL                = CONVERTED_COST
          EXCEPTIONS
            CONVERSION_NOT_MAINTAINED = 1
            PARTNO_NOT_FOUND          = 2
            OTHERS                    = 3.
    " ... [do the rest]
    Thanks for your help,
    Dennis

  • Error in creation of function module in e.c.c 6.0

    HI GURUS,
    i encountered a problem while creating function module in e.c.c 6.0, the error is 'THE MAIN PROGRAM OF DOES NOT BEGIN WITH "FUNCTION-POOL". kindly help me in solving this issue.

    Hi,
    You need to activate the Function Group.
    GO to Se80 --> Select function group from list box --> press enter --> Select you function group > Right click> Activate.
    Thanks,
    Sriram Ponna.

Maybe you are looking for

  • Java programming standard for conditional statement

    Hi, Is it proper Java standard to use constants first in a conditional statement? I've never seen coding in this way, even when I was in college I never saw it in any of our books. example: String x = null; if (null==x){ //Do some stuff }

  • EYE TV to iPOD

    I've gotten recorded EYE TV programs onto my iPod. My question is: "what is the most efficient way to do it?" EYE TV can record is multiple formats. It can export to QT Pro which export to iPOD. That's two steps. Is there a way to do it with one step

  • How to read inline feed using android api for odata

    Hi, Need help on reading inline feed using android api. BB and iOS supports inline but for android there is no api. Please suggest the workaround Regards, Satish

  • HTTP Adapter installation

    Hi, I was trying some scenarion in HTTP Adapter and was not able to get message in Integration Server. I found in RWB->Component Monitoring->Adapter Engine->Adapter Monitoring    HTTP Adapter is not available. Is this means HTTP Adapter is not instal

  • How to convert Comtrend 9020 Homeplug to wifi?

    Hi, I have a BT Homehub 2, with a pair of Comtrend 9020 homeplugs so that I can use the Internet in an outbuilding (which is out of range of the wi-fi signal). It works very well, but I would like to be able to use my laptop, without having to plug i