CS11 enhancment

Hi expert
i have requirement where i need to create a extra column in the line of component requirement as (total stock available for that component ). for the same i thought to pick the data from MMBE, but its not working.
Could someone give me proper exit.
Regard
Nabil

Hi dear,
You can ask your ABAP er to create a Z report by copying CS11 and fetch the stock of item from MBWE-LBKUM for perticular material and plant combination.
This will solve ur problem.

Similar Messages

How to add a field in the layout of cs11

Hi,
i want to add a field in the layout of cs11,
i tryed with user exits and badis as below but i am unable to find the solution .
BOM_EXIT
BOM_UPDATE
CEWB_BOM_CUS_FIELDS (SCREEN ENHANCEMENT WITH BOM HEADER)
CEWB_BOM_UPDATE
CEWB_ITM_CUS_FIELDS (SCREEN ENHANCEMENT WITH BOM ITEM)
PCSD0001 Applications development R/3 BOMS
PCSD0002 BOMs: Customer fields in item
PCSD0003 BOMs: Customer fields in header
PCSD0004 BOM comparison
PCSD0005 BOMs: component check for material items
PCSD0006 Mass changes user exit
PCSD0007 Check changes in STKO
PCSD0008 WBS BOM: Customer-specific explosion for creating
PCSD0009 Order/WBS BOM, determine URL page
PCSD0010 Order/WBS BOM, determine explosion date
PCSD0011 Knowledge-based order BOM, parallel update
PCSD0012 Customer - Mat. number/mat. number during material exchange
PCSD0013 Customer-specific processing of an explosion for BOM browser
Thanks,
ksbabu

Hi,
Please see documentation of enhancement MM06E005 (transaction SMOD).
Userexit EXIT_SAPMM06E_016 is a component of enhancement MM06E005.
With that enhancement, you can
-   Maintain/supply your own customer fields
-   Update your own customer-specific tables
You cannot:
-   Change standard fields
-   Change data that depends on the document header in the items
-   Change data that depends on an item in the document header
Please have a look at Business Add-In (BAdI) ME_PROCESS_PO_CUST.
Regards,
Edit

BOM Header and BOM Item Enhancements

Hi all,
I just want to make sure I got this correct so far and looking for further info. I have some z-fields(custom fields) that I'm adding to CI_STKO (BOM Header) and CI_STPO (BOM ITEM). I need to be able to display these fields in transactions CS02,CS03,CS11,CS12,CS13. I think I'm suppose to use the following enhancements:
PCSD0003 : BOMs: Customer fields in header
PCSD0002 : BOMs: Customer fields in item
Can anyone give me some info on the screen exits in these enhancements if this is correct and if not can someone give me some guidence to displaying the z-fields in these transaction?
Message was edited by:
Akeem Lockett

You will have to make all the modifications inside the function group XCSA.
You wiill get the necessary exits there.
For displaying the custom fields you can use the screens 701 to 721. These are subscreens for displaying the item details. The moment you make changes here in these screens , you will be able to see the effect in CS01/02/03.
Hope it helps.

Enhancement to a cube

Hi Gurus
I am working on BI 7 and as per a requirement i had to add 2 fields i.e calmonth(0CALMONTH) & a key figure namely document number (0CRM_NUMDOC) to a cube, now in tranformation calmonth is being mapped to a field in the DSO name of the field being, date field(0CRM_CRD_AT) and the key figure is being mapped with field of the same name in the DSO.After adding the fields to the cube and performing the full load i do not see the result for all records of the 2 fields that were loaded in the cube.kindly suggest..points will be hansomely awarded

Hi Sharma,
As u said the fields to be added to the cude, in this case the DS is already having this fileds and not mapped at the intal satage of mapping....????
Can you check in RSA3 whether these fields that you have added does contain the Data for this perticluar Datasource.
If you have enhanced the data source then u have to chek at the source system level itself.
Since you are using BI.7 the DTP method then there is only 1 place that you map is in Tranformations.
In this place it is direct map and 0CALMONTH if you map to any data field it will take the conversion automatically.
Same way the Key field also if it is a direct field then it has to come.
Best Regards,
VNK.

Enhance MR11

Hello Gurus ,
I am trying to enhance MR11 Transaction (Report : SAPRCKM_MR11) . Here i am adding GR and IR posting date(BUDAT) as selection field .
Requirement is that MR11 should consider Gr and IR for that period.. compare and show the difference .
In the program
I added posting date(BUDAT) in the select query to 'v_ckmlgrir' . and it is picking all the records with in that period , open and cleared both .
1) But I want only the open one .....and I dont see any flag for that ....so is there any way i can get only the open items ?
2) I observed that if i dont specify posting date ...I mean just run the standard MR11 ...then also it picks up open and cleared items ....but during processing it is considering open only don't know why ..i debugged it its going through every item item but in the end considering open only which is correct ....so not understanding why its not doing the same if i restrict it to posting date .....
any suggestion is greatly appreciated !!
PS : GR/IR account open items I can see from FBL3N .

If you are using an account assigned PO then possibly the order(PM order, internal order etc) to which your PO refers might have status as CLSD.
Check and reverse the status.

Extractor 0FC_BP_ITEMS - Business Partner Items Enhancement

I'm looking at using 0FC_BP_ITEMS extractor to extract Open and cleared items. Has anyone worked on the enhancement of this extractor. If so what are the steps involved in enhancing this extractor? Is it similar to the Full load extractor 0FC_CI_01 and 0FC_OP_01. Any help will be great.

Hi,
Please have alook in help.sap.com- Netweaver- BI Content-FICA.
This is not same as those two datasources which you mentioned. This datasource will give you delta records.
Regards,
Asish

What is new in Enhancement Package 2 and 3

Hi all,
The [ERP Solution Browser|http://solutionbrowser.erp.sap.fmpmedia.com/] is an excellent tool to find out, what's new. However I did not find any means to get a list of new features in ERP 6.0 enhancement packages 2 and 3. Any hint (especially what's new in HCM) is welcome!
Regards
Matthias

Hello Matthias,
check out Service Marketplace, alias ERP-EhP to find out what's being delivered as part of an Enhancement Package:
http://service.sap.com/erp-ehp (logon required).
Basically, it provides the following:
link to SAP Enhancement Package Infocenter to understand the content based on functional domain, e.g. HCM.
documentation on
- EhP concept and strategy
- overview presentation SAP ERP EhP 2 and 3
- detailed presentation SAP ERP EhP 2 and 3
- preview SAP ERP EhP4
- how to implement EhP ("Must know guide for IT professionals")
- test case templates
- links to other useful resources (e.g. ERP solution map, media library, functional areas)
Hope this helps!

Create a new view in a enhance component

Hi All,
I want to create a new view for sales order and quatation in a component BP_factsheet.When i craete new view ,it is asking about some value like model node, bol entity, higher level, bol realtion.after that is is asking context node ,bsp application ,custome controller and view type.How can i get these value .when i create a new view then have to add these view in run time repositry under a window or not?
Thanks in advance....
Vishwas

Hello Vishwas,
You might be interested in knowing how to customise the new UI to add a new view using the enhancement concept.
Please refer to the published document on the service marketplace:
http://help.sap.com/saphelp_crm60/helpdata/en/1a/023d63b8387c4a8dfea6592f3a23a7/frameset.htm
refers to the link at
service.sap.com/okp
Inside this go to:
SAP CRM 2006s: Learning Map for Technology Consultants
wherein you can find the cookbook to perform similar operation in detail.
SAP CRM UI Cookbook
I hope this helps.

USB Enhanced Performance Keyboard utility crash

USB Enhanced Performance Keyboard (Wired) : skd881x daemon has stopped working
What I'm getting here is a consistent crash of the OSD / button management daemon (Skdaemon.exe) on a standard french Vista 32bit install. This might be a duplicate of this unresolved problem, although the OS is 32 bit here.
I can reproduce the crash easily by using either one of the Volume+, Volume- or Mute buttons at any time as long as the Play/Pause button has never been pressed before. If I start the daemon, choose "Play/Pause" (the indication "Play/Pause" appears in the OSD), then the instance of the daemon will never crash afterwards and I will be able to use the volume buttons until the next reboot.
I have tried :
using the keyboard configuration tool to change most of the settings,
clean uninstalling/reinstalling the (latest) driver and utility,
looking up for a solution elsewhere,
to no avail.
I would appreciate any pointer to resolve that annoying problem.
EDIT : updated the title so it appears more explicit from the forum view

I know that bumping my own thread is not really a display of gentleman's manners, but I would like to know if there is a way to reach lenovo directly, at least to make the company aware of this annoying bug (which does seem to be recurrent). I can't seem to find it as I'm lost in the endless cross-references between lenovo and IBM support pages, and a part of the online support doesn't seem to be available in France

Looking for Chapter Tool Beta or other app to create enhanced podcasts

Hi all. I am looking at creating enhanced podcasts. On Google I found a mysterious app that Apple has apperantly created - "Chapter Tool Beta". However, all links to this app are dead. Any idea what happened to that app?
Also, what are some alternatives? Garage Band doesn't work well, as in this project I am working on, we have to show a screen shot, then in the next "frame" same screen shot, but with a highlight box over an area. And, it's hard to line up images in GB. Any ideas? Thanks,

I think the Chapter Tool is now dead - though someone did ask about this a few weeks back: it might be worth searching for the thread to see whether anyone could help.
I would suggest you look at Podcast Maker: this will take your pre-existing mp3 files and add chapters and images to make an m4a 'enhanced podcast', and incorporate the information you give it into a feed file. It will then upload the podcast to your iDisk or other server and ping the iTunes Store for you. I've used it for three years now and found it very reliable.

Enhancement for MB1C/MB1A before creation of an Accounting Document

Hello everyone,
Actually I want to get the material document number(MBLNR) before the creation of an accounting document when using the transaction MB1C or MB1A.
I will have to use the value 'MBLNR' to update a field during the creation of an accounting document(the field SGTXT should be updated with the MBLNR).
I have already tested the following BADI's which provide me the value of the material document number:
- MB_DOCUMENT_BADI (BAdIs During Creation of a Material Document)
- MB_DOCUMENT_BADI_SAP (BADI for Creation and Changing of a Material Document)
and I am using the BaDi 'AC_DOCUMENT' to update the required field with the material document number(MBLNR).
The problem is that the BADI's 'MB_DOCUMENT_BADI ' and 'MB_DOCUMENT_BADI SAP' are call after the creation of the accouting document(after the BADI 'ACDOCUMENT') meaning that I can't used these BADI's as the value MBLNR is not available before.
My idea was to export the value to memory ID before the creation of accounting document and import the value in memory ID in the BADI's 'AC_DOCUMENT' to update the field SGTXT.
I am currently looking for other enhancements or BADI's which can help me to solve this issue.
After much research on the internet, I did not succeed in finding a suitable hint which can help me.
I would be grateful if someone could guide me(even a small hint will help me a lot as am I am new in the world of BADI's) on how to find a suitable way to get the document number(MBLNR) before the creation of an accounting document(before calling the BADI 'AC_DOCUMENT').
Thanks a lot in advance for you help.
Kind Regards,
Bryan

Hi
I had a look through the program and found an enhancement spot ES_SAPMM07M available through out. Sadly i am not able to create a material document in my system some master data issue but there are various enhancement points in this enahcmenet and you need to debug on save and find the right enhancement point to export the value.
Put a break point in the following includes which have only one subroutine in them
MM07MFF9_F_SEGMENTE_BEWERTEN
MM07MFF9_F_SEGMENTE_ERSTELLEN---> In this accounting item are created. If stops here and in debugger change the value if it works then there are various enhancement spot for the same.
MM07MFF9_F_SEGMENTE_ERZEUGEN
MM07MFF9_F_SEGMENTE_GENERIEREN
Hope it helps
Nabheet
Edited by: nabheetmadan09 on Feb 1, 2012 3:49 PM

COST GL account when goods issue - enhancement or user exist

Hello SAP exports,
There is a requirement from F&A department for different COGS GL account based on Customer Account Assignment Group value when goods issues (GI) (goods movement). Customer Account Assignment Group field name is KNVV-KTGRD.   The solution is NOT possible for standard SAP SD (pricing procedure) / MM (T-Code:OBYC with GBB).    Therefore, I am searching solution for enhancement.
the requirement is like following:
KNVV-KTGRD                                   COGS GL account at goods issue
01                    Domestic                   818100
02                    Export                       818200
03                    Testing - sample         818300
04                    Testing - VOM            818400
05                    Franchise                   818500
Can you please let me know what and how this can be resolve by enhancement or user exist?
Thank you.
Kind Regards,
Sylvia Chen

Hello,
The requirement is to provide different COGS GL account based on the Customer Account Assignment Group value(KNVV-KTGRD) when SAP performs goods issue. for example, movement type 601,
This means, when company ships goods to differnt customers, then SAP should generate different COGS GL account.
for example, when company ships goods to customer account assignment group '01' (Domestic customers), then SAP should generate COGS GL account 818100.
when company ships goods to customer account assignment group '02' (export customes), then SAP should generate COGS GL account 818200.
when company ships goods to customer account assignment group '03' (Testing - sample customers), then SAP should generate COGS GL account 818300.
the logic is following:
KNVV-KTGRD              COGS GL account at goods issue
01 Domestic                 818100
02 Export                     818200
03 Testing - sample      818300
04 Testing - VOM         818400
05 Franchise                818500
I am not good at user exist.
Can you please provide solution with step-by-step guide?
Thank you.
Regards,
Sylvia Chen

Runtime error in enhancement spot-' mereq_topline does not exists.'

Hi all,
I have implemented an implicit enhancement spot in ME53n.
When i applied break point in enhancement spot and control goes to ebhancement spot in debugging mode, i got purchse requisition number in mereq_topline.
When i tried to use this structure value in code i get runtime error-
' mereq_topline does not exists.'
Can you please guide how to resolve this runtime error.
thanks.
Edited by: Sanjay_lnt on Sep 20, 2010 8:52 AM

Sanjay,
try to delete the enhancement and recreate it
Thanks
Bala Duvvuri

Runtime error in extractor enhancement

Hi,
I need to enhance the extractor 0WBS_ELEMT_ATTR with an additional field. The field is a Z field from the table PRPS.
Now PRPS is a base table for the extractor for this extractor, so simply adding this field into the append structure should suffice.
However, when I do this the extractor gives the following runtime error:
Syntax error in program "SAPLPSBW "
Component called ZZSO already exists.
The error is in the function call "e_fname".
I have found that the same Z field is used in another structure CNCI_PRPS. Could this be leading to the error?
Please let me know if any of you have any insights as to why this problem might be occurring.
TIA,
Amrita

Hi,
In my case the problem was caused because the same ZZ Field was used in two structures.
One for ECC and one for BI. This was causing some interference.
To solve this I changed the field name in my extract structure to ZZZSO and populated it via a CMOD routine.
Hope this helps.
Amrita

CS4 is Constantly disabling GPU enhancements

Each time I open CS4 and the initial image I get this message, "Photoshop has encountered a problem with the display driver, and has temporarily disabled GPU enhancements. Check the video card manufacturer's website for the latest software."
I'm writing to the Adobe Forum because GeForce feels they are not the cause of the problem. Here is what I've done toward resolving this problem:
As a side note let me add here that after upgrading CS2 to CS4 this error message appeared religiously. That caused me to purchased an Nvidia GeForce 9600 GT display adapter w/ 512mb memory. Prior to installing the new card I downloaded their newest drivers for this card after removing the old drivers. Originally I had a GeForce 7600 card. The error message continued with the new card. I've searched the settings within CS4 trying to find an option that would resolve the problem. This machine has a new motherboard, a D945GNT Intel board. It will support 64-bit however I'm currently running XP Pro 32-bit, SP3. It also has a new Pentium D dual core processor. I have 4 GB of RAM.
Have I overlooked a setting in the CS4 program that will resolve the issue? The graphics are slow to regenerate if you move in or out. Bridge is slow to generate all images in folders. As I view the tutorials on the Net I see normal regens where mine are slow. And last but certainly not least, other programs are slow to open. I've done several virus scans and turned up nothing. I've run chkdsk /r on all of my drives. I've run defrag on all my drives as well as Disk Cleanup.
I've got a copy of Vista Ultimate heading my way. I'm prepared to wipe the c-drive and begin over. Do you think my problems will go away after the new operating system in installed or is this my second bad 9600 GT video card?

Folks,
I tested several older and newer cards with the new CS4 enhancements on Win XP SP3 workstations. Here my lowdown (or 2 cents):
Issues on all cards, no matter what:
-All cards did have the one issue when displaying an image on a 2nd monitor: Background showing through. Just maximize the image window and the problem is gone. This happens to all my 6 video cards, no matter what driver, brand or GPU!
How to avoid the "GPU Message" and reduce drawing issues:
Here two cards that deliver a pretty decent price/performance (nothing is perfect, really). Key: The DEVIL IS IN THE GPU SETTINGS DETAILS! With these settings, we had a good performance with brushes, clone/healing, zooming and NO MORE GPU MESSAGE:
NVidia GeForce 8600 - 512MB
Use the following settings, and the error messages are gone:
-Vertical Sync: Yes
-3D Interaction: Blank/Disabled
-Force Bilinear Interpolation: No
-Advanced Drawing: Yes
-Use for Image Display: Yes
-Color Matching: Yes
ATI Radeon 4670 - 1GB
-Vertical Sync: No
-3D Interaction: Blank/Disabled
-Force Bilinear Interpolation: No
-Advanced Drawing: Yes
-Use fro Image Display: No
-Color Matching: Yes
I really believe that you will encounter issues no matter what brand, type or age of GPU you're using. The Trick is to find the perfect GL settings for your card. Based on my research, the OS seems to have no impact.
Hope this helps,
Cheers,
Bruno

CS11 enhancment

Similar Messages

Maybe you are looking for