CS2 Scanning Problem - error with acquisition module interface

Hi there,
I have an Epson Perfection 4180 scanner which has worked for years. I moved, plug everything back in, the scanner works one time, and from then on, I get this error: "Could not complete the Import command because of an error with acquisition module interface."
I've searched around, and seen others with this problem, but, no real solution. From what I've read, it's a Photoshop issue. I've downloaded the TWAIN drivers and re-installed the scanner, and deleted Photoshop's preferences file. The scanner does work through the Windows Scanner Wizard. I've turned off the Windows Image Acquisition thing in the control panel, and then turned it back on.
ARGH, I am really pulling my hair out. Please help!
Thanks so much!

I'd try to avoid the hassle of messing with the PS installation if possible.
One other thing I have seen is to temporarily disable the Twain plug-in, with a ~ in front of the name, in
C:\Program Files\Adobe\Adobe Photoshop CS3\Plug-Ins\Import-Export

Similar Messages

  • Prime infrastructure 2.0 - Inventory error with Virtual-Access Interface

    Hi,
    We have recently been trying to resolve a few issues with routers which get partial inventory failures upon discovery. I have managed to narrow this down slightly with the help of the inventory.log file. (With help from this post https://supportforums.cisco.com/thread/2255346 ) I have found the following happnes when this device is added:
    [2014-03-04 14:00:27,537] [ICE Service[ 1]Thread: 29] [inventory] [ERROR] - 172.16.3.202 Object detected as SAME but DB Object obtained from the database is NULL For instance id: 0 For generated POJO: PPPEncapsulation[callBack=false,callIn=false,callOut=false,multilink=false,name=Virtual-Access1,oneTime=false,owningEntityId=69757688_172.16.3.202,preferedAuthType=NONE,deployPending=NONE,name=Virtual-Access1,owningEntityId=69757688_172.16.3.202,instanceId=0,_orderedListOEIndex=<Integer>,_creationOrderIndex=<Integer>,instanceVersion=0]
    I have highlighted above where it mentions the problem with the virtual access interface. The configuration on the router is for PPPoE and the virtual-access1 interface is bound to Dialer0.
    It then goes on to roll back the transaction:
    172.16.3.202 persistObjects called with addList size = 307, updateList size = 6
    172.16.3.202 Exception while persisting: com.cisco.xmp.persistence.common.util.DMMCRUDException:,message=errorId=12,componentName=CRUD Error Create Object Failed
    172.16.3.202 Exception occured while inventory collection for device with id 69757688: com.cisco.xmp.inventory.ice.InventoryException: errorId=12,componentName=CRUD Error Create Object Failed
    172.16.3.202 Done with collection. Total call method time: 15308
    172.16.3.202 Rolling back the transaction
    Has anyone else come accross this issue?
    I have attched the log showing just messages from this device.
    Thanks,
    Mike.

    TAC and I found a bug, CSCum05301.
    May be that is also helpfull for others.
    https://tools.cisco.com/bugsearch/bug/CSCum05301/
    Symptom:
    Inventory collection will fail if following keywords are used as part on description command on the interface config level of IOS device: 1Gbps, 10Mbps etc.
    Following error message is visible on the DWC:
    Inventory Collection Status: Partial Collection Failure
    Collection Status     Failed feature(s)
    Unable to configure DSL, Serial, POS, Ethernet, Loopback, Virtual-Interface, Tunnel, Vlan, Switchport and Service Module interfaces on ISR, ASR and Switches.
    Conditions:
    Speed keywords like 1Gbps, 10Mbps etc. available as part of descrption command in IOS interface level.
    For example:
    interface FastEthernet0/3
    description 10Mbps
    Workaround:
    Use a space character between number and unit keyword, like 1 Gbps.

  • Graphic problems/errors with Mainstage 3 and MBP (15'' 2011)

    Hi,
    I bought Mainstage 3 for my MBP (15'' 2011).
    When i click con "perform" i get graphic errors.
    I have the same issue with the old Mainstage version since Mountain Lion.
    Also a fresh installation didn't help.
    I think i'm not the only one with this issue!
    I don't know how to report a bug?
    Perhaps someone can help me.
    (and  I'm probably not the only one (see feedback in Apple Store) If you also have this problem, please add a comment with your configuration (Hardware, Software))
    /forgotten ebi
    So, here an example how it looks like when i click on "perform":

    Same configuration,same problem. BUT I found a workaround.
    Mainstage has this error with the AMD video card and/or a second monitor connected.
    With a little app (http://gfx.io)  it's possible to really force the MBPro to use the Intel Graphics card.
    This will work only with the internal screen, not with a second screen connected.
    And sometimes you need to restart, to really make the Intel video card free.
    This works fine...In the meantime of a fix.

  • Error with Function Module for Automatically Reversing FI Documents

    We are trying to use BAPIACREV to automatically reverse a document as part of workflow but get an error with 2 of the import parameters stating they were never transferred:
    1) OBJ_KEY_R
    2) OBJ_SYS
    Does anyone know how to resolve this?

    Hi,
    OBJ_KEY : Reference Key
    This key value must be created while posting the document and this key must be maintained in any of SAP tables
    for example : If the it is Accounting document then all detail found in BKPF and BSEG table, you can find OBJ_KEY in BKPF-AWKEY field.
    OBJ_SYS : Logical system of source document
    Logical system may be maintained in some table.
    for example : If the it is Accounting document then all detail found in BKPF and BSEG table, you can find OBJ_SYS in BKPF-AWSYS field.
    or you can use following FM to get logical system
    CALL FUNCTION 'OWN_LOGICAL_SYSTEM_GET'
    IMPORTING
    OWN_LOGICAL_SYSTEM = L_V_OWN_LOGICAL_SYSTEM
    EXCEPTIONS
    OWN_LOGICAL_SYSTEM_NOT_DEFINED = 1
    OTHERS = 2

  • Error with Writer module

    Hello,
    I am trying to read from an Azure SQL database and write to an empty one with the same column schema.  When I run the experiment it says
    Error 0000 
    and says 
    Process exited with error code -2
    is there something I am doing wrong or is this a problem with the writer module?

    Hi,
    I created a new table with the exact output schema I want and a clustered index but now the issue I get when trying to write the data set to this table is:  
    [ModuleOutput] DllModuleHost Error: 1 : Program::Main encountered fatal exception: Microsoft.Analytics.Exceptions.ErrorMapping+ModuleException: Error 0000: Internal error ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Data.SqlClient.SqlException: Incorrect syntax near 's'.
    Module finished after a runtime of 00:00:04.9958146 with exit code -2
    Module failed due to negative exit code of -2
    seems like this is very difficult and confusing to write to a table and should be fixed

  • Multiple errors with DSC modules modbus master and slave

    Hi,
    I've searched quite a lot of posts but haven't found solution for my problem. I'm playing with LabVIEW DSC module and it's modbus master and slave functionalities. Even the LabVIEWs own modbus examples (Modbus Simulator and Fundamentals) seem to work randomly or not at all: When checking the Variable Manager utility Modbus Simulator (i.e. modbus slave/server) seems to deploy variables correctly with good quality but Modbus Fundamentals (i.e. modbus master/client) most often shows unknown value or bad quality for all the variables. When running the VIs I get 'Error -1950679035 Unable to locate variable in the Shared Variable Engine' and sometimes some other errors too. If the Modbus Simulator (slave/server) is expected to work fine I guess I should get two slaves communicating, but this isn't happening either. So maybe Modbus Simulator example isn't working either.
    I've tried undeploying and deploying the libraries, stopping and starting the SVE, booting PC, reinstalling DSC module, and setting firewall and antivirus software off. This problem is going on with two different computers, both of which have recently installed LabVIEW 2011, first PC with Win XP and second PC with Win 7. No other OPC servers should be installed to these computers. And what is really interesting, the problem seems to have nothing to do with my network since Simulator and Fundamentals examples are not working even if the network cable is unplugged!
    Any suggestions? Replies are highly appreciated!

    V8 has the same feature, but the words are different.
    The Generator typically uses the Driver time base, and the Gl. Var Write is writing once per block.
    So, to see all values, you must have a block size of one.
    I set up the Driver timebase to 10 Hz, block size of 1. The Generator and the Read Variable default to the Driver timebase.
    The Generator is making a 2 Hz Rectangle waveform. YOu can see that it's shifted, but otherwise intact.
    - cj
    Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab.

  • Error with Function Module

    Hi Guys,
    I have created a custom function module ,and transported to Production server,but the thing is am getting an error like "Error generating the test frame".What could be the reason?Give me your suggetions on the same.
    Warm Regards,
    Mohandoss P.

    Hi,
    I you have complex type in the parameter list you will get this error for example generic types, xtrings, strings, object references.
    But, function module can be called from programs.
    Check for Oss notes if you want to solve this problem
    Best regards..

  • Error with function module TABLE_COMPRESS?

    Hi all,
    What is the alternate function module for TABLE_COMPRESS?
    This is going fine in 4.7 version.
    But in ECC 6.0, if we use this function module we r getting SLIN error (Obsolate statements) .
    How can we rectify this SLIN error?
    So we have to use another funtion module for the same purpose.
    Can any one help on this?
    Rewards to all.
    Thanks & Regards
    Anu.

    Hi,
    I you have complex type in the parameter list you will get this error for example generic types, xtrings, strings, object references.
    But, function module can be called from programs.
    Check for Oss notes if you want to solve this problem
    Best regards..

  • Error with compiling module

    I have such folders structure in my Flex project:
    components/classes/
    components/modules/
    In modules/ folder I have a module (<mx:Module>)
    myModule.mxml.
    That module imports class myConnector.as from classes/ folder
    using statement:
    import components.classes.myConnector;
    I can work with class' properties and methods and there are
    no errors. But when I try to compile myModule.mxml with mxmlc using
    command:
    mxmlc
    pathToProject/components/modules/myModule.mxml
    I get an error:
    Type was not found or was not a compile-time constant:
    myConnector.
    private var myConn:myConnector;
    As I see compiler cannot locate myConnector.as class, even
    though it is located correctly while authoring.
    How can specify path to that class for compiler?
    Or there is anything else wrong?
    Thanks in advance.

    The answer is yes and no. Since your Modules are not in the
    main application directory, the answer is no. Should they live in
    the main application directory, then you can mark them as
    Applications and Flex Builder will automatically compile them and
    move them to the bin directory.

  • Problems/Errors with MS SQL7-Migration to Oracle8i

    I have a problem with the migration from MS SQL7 to Oracle 8i. I start the Migration Workbench (create Oracle-Modell in a Oracle-Database), migration tables -
    ok, indexes - ok, first views - ok then errors.
    I get the error "ORA-03114" ("Not connected to Oracle" - or similar). ?! What can I do? Please help. It's very important!
    Other Question to migration:
    Original SQL-View in SQL7: (It's only ONE example for MORE views with problems)
    SELECT *, CASE WHEN udayszvk2 > 30 THEN 30 ELSE udayszvk2 END AS UDaysZVK, Udays - sasotage AS UDaysArbeit
    FROM UDays_1
    Oracle Migration Workbench shows me (with error):
    CREATE OR REPLACE FORCE VIEW UDays AS
    SELECT *, DECODE(1,DECODE(least(udayszvk2,30),udayszvk2,0,1)/*expr > expr*/ ,30,udayszvk2) UDaysZVK, Udays - sasotage UDaysArbeit
    FROM UDays_1
    I think it must be correctly:
    CREATE OR REPLACE FORCE VIEW UDays AS
    SELECT *, DECODE(SIGN(udayszvk2,30),1,30,udayszvk2) UDaysZVK, Udays - sasotage AS UDaysArbeit
    FROM UDays_1
    Or not? Do I make a mistake? It's really URGENT!
    I use WINNT40 (SP6); Oracle 8.1.6i; MS SQL7 (SP2)
    Thank you very much.
    Swen

    Hi jeevan,
    This is rami. I am also doing same project. you can remove the master(system) tables. contact me through my mail-Id is [email protected] I am using MIg Workbench to migrate.more in mail.
    rami

  • Install problem Error with Z drive

    Our IT guys configure our machines with a Z drive as a network share.   Any ideas how to resolve the conflict with PE9 install.
    Thanks
    David

    I did not pick the Z drive for install.  I always pick the C drive if given the option.  But PE9 just went to work on its own and told me it could not install to the Z drive... there is a known issue posted here along these lines, however, so I think Adobe is on to it... of course i had to install as a trial version on a second machine to test the disk burning...then I have to solve the install problem, so I can install the license on the machine with the install problem.... all a big catch 22.  Here's the link on the install issue... I get the 1327 invalid drive error:
    http://kb2.adobe.com/cps/404/kb404946.html
    Thanks
    David

  • UMFactory initialization error with login module

    I've written a custom login module that has the following code:
    IUserFactory userFactory = UMFactory.getUserFactory();
    which causes an IllegalStateException with the following detailMessage: Could not initialize UMFactory! Please set property 'ume.cfg.path' or call UMFactory.initialize() first.
    I've found a bunch of other postings relating to this problem but none seem to have discovered the answer. Does anyone know how to resolve this? I was under the impression the method getUserFactory() could be called without any initialization?
    Cheers,
    Steve

    Hi Steve,
      Please look at this.
    /thread/3107 [original link is broken]
    Regards,
    Siva
    P.S: Award points if you fidn this useful.

  • Error with QM in interface

    For my client we developed a custom interface with the production monitoring system SCADA.
    Basically SCADA will generate a file that is picked up and read by our interface in order to register the prodution. The activities that are performed are: Create a batch, update the batch characteristics and perform a goods movement (create stock). The goods movement is done with movement type 523 which is post into QI. We fail to get this working. Every time we get the error message "Change the inspection stock of material xxx in QM only". What should I do to get this working? Is this a custo setting?
    Thnx for the help!

    It appears you have some inspections set up for the material in SAP.  Check the QM view and see if the "Quality Inspeciton" Active check box is checked on.  If it is, then SAP is expecting you do process the material via an inspection lot that may or may not be getting created for you.
    To test, create a new material, (DO NOT copy the QM screen from an material template you use).  Then test on this material.  If it gets past that error message, then you should be able to look at the QM screens and see the differences.
    Craig

  • [Solved] Strange error with sound modules

    If i modprobe any sound modules, i get strange errors which tell me to lookup dmesg.
    The error output looks like
    WARNING: Error inserting snd_mixer_oss (/lib/modules/2.6.13-ARCH/kernel/sound/core/snd-pcm.ko): unknown symbol in module, or unknown parameter (see dmesg)
    FATAL: Error inserting snd_pcm_oss (/lib/modules/2.6.13-ARCH/kernel/sound/core/oss/snd-pcm-oss.ko): Unknown symbol in modules or unknown parameter (see dmesg)
    The same for my soundcard drivers etc, simply any alsa module.
    My modprobe.conf looks as follows.
    install snd-pcm modprobe -i snd-pcm; modprobe snd-pcm-oss; true
    install snd-seq modprobe -i snd-seq; modprobe snd-seq-oss; true
    options snd device_mode=666
    alias snd-card-0 snd-ens1397
    alias sound-slot-0 snd-ens1371
    Well, this should work fine (as i know). Looking up dmesg i get the following:
    snd_pcm_oss: Unknown symbol snd_info_unregister
    snd_pcm_oss: Unknown symbol snd_info_get_line
    snd_pcm_oss: Unknown symbol snd_pcm_format_width
    I've got this problem since i updated to 2.6.13-ARCH.
    Since this problem causes hotplug to take 10 minutes to start, it's annoying. I'd appreciate any hint what i could try.
    Thank you,
    STiAT

    That did solve my problem.
    Thank you alot!
    STiAT

  • Problem installing with merge module

    I use CR Developer, Product Type Full, version 11.5.8.826.
    I use it to design RPT files that use XML and XSD files as data sources.
    I deploy these RPT files to client machines that also run a web enabled app I developed using ASP.NET v.2
    I built an installer with the CrystalReports11_5_NET_2005.msm merge module.
    However, when I install on a clean client machine with the MSI I created I get some weird database access error in the Crystal Reportviewer that's embedded in my ASP.NET webpage.
    When I then install the entire CR Developer product on the client machine everything works fine.
    So clearly, the merge module I use does not install and register all the files required to make my product work. Am I using the wrong merge module? Should I be using the four RDC merge modules?
    It's clearly not acceptable to have install the entire CR Developer app. Also, I saw another thread where they were talking about copying the entire C:\Program Files\Business Objects\common\3.5\bin directory to the client machine. That cannot be an acceptable solution either, right?
    I need a definitive answer how to deploy the correct runtime environment to make my RPT files correctly run using the Report viewer in my web pages.
    To be clear, I do NOT use VS.NET 2005 to develop my RPT files. I do not use anything built into Visual Studio to build my RPT files. The only interaction with .NET is that I have a Reportviewer object embedded in one ASP.NET web page that visualizes the RPT files I previously created using the CR Developer app.
    This is from my web.config file:
    <add assembly="CrystalDecisions.CrystalReports.Engine, Version=11.5.3700.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
    <add assembly="CrystalDecisions.ReportSource, Version=11.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
    <add assembly="CrystalDecisions.Shared, Version=11.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
    <add assembly="CrystalDecisions.Web, Version=11.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
    This is the aspx from the web page that shows the report viewer:
    <%@ Page Language="C#" MasterPageFile="~/MasterPage.master" AutoEventWireup="true"
        CodeFile="ReportPage.aspx.cs" Inherits="Paladin_CReports.ReportPage" Title="Paladin Reports - Crystal Reports - Report" %>
    <%@ Register Assembly="CrystalDecisions.Web, Version=11.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"
        Namespace="CrystalDecisions.Web" TagPrefix="CR" %>
    <asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" runat="Server">
        <asp:Panel ID="Panel1" runat="server" Height="28px" Style="z-index: 100; left: 0px;
            position: absolute; top: 148px" Width="1014px">
            <CR:CrystalReportViewer ID="CrystalReportViewer1" runat="server" AutoDataBind="true"
                DisplayGroupTree="False"
                Style="z-index: 120; left: 0px; position: absolute; top: 0px" HasCrystalLogo="False"
                EnableDrillDown="False" HasDrillUpButton="False" HasToggleGroupTreeButton="False"
                HasViewList="False" ShowAllPageIds="True" HasRefreshButton="True" />
        </asp:Panel>
    </asp:Content>
    I need a definitive answer how to deploy the correct runtime environment to make my RPT files correctly run using the Report viewer in my web pages.
    Thanks,
    Rodger

    Hi,
    Give a try to five read permissions to IIS_WPG for the temp folder which is under your account(In case of web application) and in case of windows app give read permission to a user for c:\windows\temp and to the folder which contains crystal reports.
    Need more info?
    What meerge module you have downloaded?
    Right merge modules are [here|http://resources.businessobjects.com/support/additional_downloads/runtime.asp#06]
    Note if appliaction uses RDC only then you need to install RDC merge modules.
    Windows or web application?
    Are you changing the XML schema?
    Hope this help!!
    Regards,
    Amit

Maybe you are looking for

  • Lync 2011 for MAC and Lync 2013 Server Std

    Hello, We are using a Lync 2013 Std (single-server) as a POC.  It works fine for Windows-clients but I cannot connect using Lync 2011 for MAC from any MAC machine. Using automatic configuration, I cannot connect to the Lync server. Using manual confi

  • Call of duty 4 punk buster

    Getting the error "Could not open this file (pbsetup.run) because PowerPC apps are not longer supprted" , I need to install punkbuster for my Call of Duty 4 and iam runnig osx lion v.10.7.2. How can iopen the punkbuster installion in mac osx lion?

  • Given Up On BT

    I have been a Vision customer almost from day one, (at two different addresses),  and had no problems whatsoever with the service until the recent software update which has caused my box to reboot constantly, fail to record and generally drive everyo

  • Rank function code

    Does anybody know where I can find the code of rank function in Oracle 8.1.6 Enterprise Edition Thanks

  • How can i watch video's on my ipad?

    some websites that i view have video's that i cannot watch on my ipad. how can i watch these?