CS3 activation - "no connection", no support

I get "no connection" when trying to activate Adobe Photoshop CS3 (firewall, antivirus is off). Also I called provided number and I didn't get activation code and was told to contact support. Chat support didn't help. What can I do to actiavate CS3 or it's impossible to do?

Then check you end make sure there is no file "host' that is redirect any of Adobe web site names like"
activate.adobe.com
practivate.adobe.com
ereg.adobe.com
activate.wip3.adobe.com
wip3.adobe.com
3dns-3.adobe.com
3dns-2.adobe.com
adobe-dns.adobe.com
adobe-dns-2.adobe.com
adobe-dns-3.adobe.com
ereg.wip3.adobe.com
activate-sea.adobe.com
wwis-dubc1-vip60.adobe.com
activate-sjc0.adobe.com
hl2rcv.adobe.com

Similar Messages

  • CS3 Activation - no Connection

    Whenever I try to retry activating over the internet the same window keeps reloading.

    Hi Nomis,
    Please refer the KB : http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html#ac tivate-problem
    Also please provide me the serial number so that I can check the activation status at my end.
    Send me a private message. Do not post it here.
    If you dont know how to do that refer : http://forums.adobe.com/thread/1184148

  • Again CS3 activation problem

    OK. same problem here.
    - Installation of CS3 premium without problems. (one license is available and this is my legal private version)
    - key accepted without problems
    - all programms (of CS3) are running very well on my new computer without problems (but only as testversions)
    But activation is not possible
    Message: Activation - no connection 
    (in German: Aktivierung - keine Verbindung)
    I'm confused.
    The internet connection is stabile.
    I can login at all adobe sites without problems.
    What I tried before asking here:
    I searched here in forum and in the web.
    I did follow this instruction:
    Contact Customer Care  (only possible while logged in)
    and
    Sign in, activation, or connection errors | CS5.5 and later
    (I didn't found direct advices for CS3)
    All is ok
    - connect to the internet
    - access to secure sites is possible
    - hosts file is ok
    - certificate is ok.
    But:
    grateful for helpful advices (custumer support is only available from Mo till Fr 9 to 17 clock and activation by phone is not longer supported)
    pixxxelschubser

    Additional:
    (sorry for my bad english)
    yesterday I opened a chat in the english chatoom. The first supporter was very friendly the whole time.
    A short time later the chat was transfered by the first supporter to the technical support chat. The second supporter was very friendly at the beginning while "to verify your account and to review the details of your request". Friendly at the middle of the chat - till the offerte "to start sharing the screen" with Adobe connect. Because I have a new computer, this try failed (no Flash player was installed). I asked the supporter how  I can reopen the chat after installing the Flash player ( I thougt this will be need to restart the computer.) But the answer was: " No problem, chat screen will remain there."
    And such is life - without an restart Flash player doesn't functionate correctly - no possibility to do something with Adobe connect. And now - a friendly expulsion:
    Here is the last part of the chat (I only changed the names to Supporter, Me and Questioner)
    Supporter: Are you able to login successfully?                                                 (my own supplement: means to login to Adobe connect)
    Me: No.
    Supporter: Please visit Adobe User Forums at
    Me: I installed Flash player and clicked the link you‘ve posted and the message »need flashplayers« remains.
    Supporter: https://forums.adobe.com/thread/1253193
    Me: ok
    Supporter: Is there anything else I may assist you with today?                         (Remember: my question isn't solved yet)
    Me: please wait a minute
    Supporter: Ok
    Supporter: Questioner, I really apologize for the inconvenience that we do not have any support on this issue. Please follow the instruction from adobe community forums.
    Supporter: Please click on the bell oprion.
    Me: What means this sentence by JJMack from the forum: Then check you end make sure there is no file „host‘ that is redirect any of Adobe web site names like“
    Me: And what is the: bell oprion? Sorry, my english isn‘t the best
    Supporter: I am sorry about that statement.
    Me: perhaps the flash player is available after a restart of the computer. Can I reopen this chat with you?
    Supporter: Sure
    Me: How? Perhaps save the link and easy reopen?
    Supporter: Questioner, you need to follow the instruction from the above forums links as we do not have any kind of help for this software.    (this does not help to reopen the chat!)
    Me: Yes I wanna. But please: What means this sentence by jjMack from the forum: Then check you end make sure there is no file „host‘ that is redirect any of Adobe web site names like“
    Supporter: I apologize for the inconvenience.                                                       (at least)
    Supporter: Adobe does not support old software anymore and please upgrade your software to CS 6 or CC version.            (And this is the best!!!!!!!!!!!!!!   I only want to activate my payed software on a new computer and not to buy another version)
    Me: Thank you for spending your time. I‘m worry.
    After the chat I installed my standalone version of InDesign CS5. No problems to activating this programm.
    One more try to activate the CS3 - no connection.
    Finally I copied the hosts.file from my old computer to the new one and tried to activate again - no connection. I was frustrated!
    I do not have the windows closed and not shut down the computer. I just went to sleep.
    Today in the morning: the failure message was still open in Photoshop CS3 - I clicked on try again to activate - and one minute later -------> Activation succesful
    Without any new changes on my system. This sounds like magic.
    Summary:
    CS3-programms runs on a Windows 8 computer without problems.
    But the activation is a matter of luck!

  • Dreamweaver CS3 Activation Issue

    I have tried Phone and Online support to no avail. I have a copy of Dreamweaver CS3. I just got a new PC and need to move everything over to the new machine. Both are Windows 7 PC's.
    On the New PC, when I install everything it is not able to authenticate via the Internet for some reason. So, when I contacted support for the Authorization Code the two he gave me came up invalid and he told me to post my problem here that he could not help me any further.

    Hi SIWeb,
    See Sign in, activation, or connection errors | CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html.  It is likely that your host file had entries for Adobe added when you installed some other software title.
    Thanks,
    Preran

  • Will Unity Connection ever support Microsoft 365 Exchange

    Hello,
    Will Unity Connection ever support Microsoft 365 Exchange.  The link below states that it is not supported in 8.6 but does not state that it will never be supported.  If If anyone has any information it would be greatly appreciated.  Thanks
    http://www.cisco.com/en/US/prod/collateral/voicesw/ps6789/ps5745/ps6509/solution_overview_c22-677999.html

    HI Jason,
    Here's what I found, Exchange 365 is supported on CUC 8.6.2, which will come out in a few weeks.  However there's a Microsoft limitation of 19 users, but Cisco and Microsoft are actively working the problem.
    Regards,
    Tere.
    If you find this post helpful, please rate!

  • How to check for active internet connection in iOS device

    Hello All,
    Recently I've come to  know that there are some API's provided by Flex 4.6 in Flash Builder 4.6 which are not supported in iOS based devices like iPhone and iPad.
    You can check the list here - http://help.adobe.com/en_US/as3/iphone/WS789ea67d3e73a8b24b55b57a124b32b5b57-7fff.html
    Now I'm helpless because in my cross-platform app, I need consinuously active internet connection and if it is not available, I want to show errors.
    Can any one help me about this.
    Thanks for reading

    Hi,
    we can check indexs uisng T codes SE11 and DB02
    Useful to run the ABAP reports SAP_UPDATE_DBDIFF and SAP_INFOCUBE_INDEXES_REPAIR.
    relevent links:
    http://help.sap.com/saphelp_nw70/helpdata/en/80/1a6473e07211d2acb80000e829fbfe/content.htm
    Re: Checking Indexes using SE11 and DB02
    Regards,
    BBC
    Edited by: BBC Achari on Jul 4, 2010 6:23 PM
    Edited by: BBC Achari on Jul 4, 2010 6:25 PM

  • Photoshop CS3 Activation

    Due to the crash of the PC, I have to install the license of Photoshop CS3 on to a different computer. Unfortunately, the on-ine activation seems not to be more available. I have a valid license and I need to use my CS3. How can this trouble be fixed ?

    Sign in, activation, or connection errors | CS5.5 and later

  • CS3 Can't Connect to Server

    Hi, My boss got a new computer and I'm trying to set up Contribute CS3 on it and I can't get it to connect to the server. It keeps saying the server isn't available or is down, but that's not the case. I have CS4 on my computer and I can connect. He's connected to the server in every other program he uses. Adobe doesn't support CS3 anymore, so if anyone has any ideas on what I should do to troubleshoot this, please let me know.

    Hi,
         How are you creating the website connection in Contribute CS3, using a connection key or manually entering the connection information? Is it in that same way, you are connecting to the website in Contribute CS4 in your machine?

  • Unable to update devices, receiving error 3014 on iTunes, and device via wifi is stating "Not connected to the internet", when it has an active internet connection

    Hi,
    I have been encountering this issue and I have run out of ideas as to what would be causing this error. On numerous apple devices for our business I will receive an error 3014 when updating a device via iTunes, and this is after the software update downloads. When attempting to update the device over wifi it states that the device is not connected to the internet, when I ensured that the device has active internet connectivity.
    Our business uses a Juniper firewall, which I thought might have been the initial cause of the issue, however I have ensured that ports 80 and 443 have full traffic flow and nothing blocking it, and I've also exempted all *.apple.com websites that I could find listed online.
    I have also tried deleting the host files on the computer I am using to circumvent the issue.
    If anyone could shed some light on what I can do to resolve this, that would be appreciated.

    Hi evanVIT, 
    Welcome to the Apple Support Communities!
    I understand that issues like the one you are experiencing can be very frustrating. For this situation however, for update errors in the range of 3000-3020, I would recommend the troubleshooting steps located in the attached article. Please use the steps and information as a reference. 
    Error 3194, Error 17, or "This device isn't eligible for the requested build"
    Cheers, 
    Joe

  • Trying to reinstall CS4 and I've lost CS3 activation key

    I bought CS3 years ago, upgraded to CS4. I'm trying to reinstall CS4 and it's asking for the CS3 activation key. I've lost the CS3 key. Is there any way to recover it?
    Thanks

    Hi houyhnhnm2,
    You need to contact Customer Service ( http://helpx.adobe.com/contact.html ) and they would be able to help you find the serial number if you have registered it.
    Else they will help you unlock the serial key after validating.
    You can even reach our chat support at http://adobe.ly/yxj0t6

  • CS3 activation unsuccessful, error 194:12

    I want to activate my CS3, but the phone activation is no longer supported and online activation returns "unsuccessful" and error code 194:12. The customer support wants to have nothing to do with that.
    (I know the quickest way would be using some keygen but I legally purchased the CS3 so I expect it to work legally too.)

    Ok, I don't know if I should make it public and it pains me that I had to stoop so low to get my apps working, but there are other people with this problem, so I guess I should post how this issue got resolved.
    I'm angry at myself for trying to settle it the legal way asking the customer support one after another for more than a month. Some of the staff were really kind and if nothing, I learned some new things, but they were downright useless because phone activation is probably some kind of taboo or what. They would persistently force me to unistall the CS3 and install to no end, even though I told them that I had formatted my harddrive and run a different OS...
    Whatever, long story short, the only known solution to this problem is to download a keygen and activate the CS3 with it through phone activation. The only problem is that you don't have the serial number you purchased in the application itself, but don't waste your time trying to be all good asking the support questions they don't know or are forbidden to answer.
    I still would like to report somewhere that I'm using an illegal serial number due to those circumstances and post the Software Licence Certificate I received upon purchasing the CS3 somewhere, so that nobody comes to bother me about that in the future, does anybody know how to do it?
    Last note: I'm really curious how the Adobe wants to manage the CC versions when they have to go through this kind of activation every month or so. I'm glad I bought the boxed versions.

  • Difference between passive and active data connection mode for  FTP

    Hi,
    Does any body have the idea of passive and active data connection mode for the transport protocol FTP.
    I have one server with FTP, I have to pick the data from this FTP to XI.
    What is the difference between active and passive data connection? Does XI supports both the connections?
    Thanks & Regards
    Katta Mohan Reddy

    Hi
    According to SAP Note - 821267
    Q: Does the File Adapter support active data connections when connecting to an FTP server?
    A: Up to and including SP14, the File Adapter exclusively uses passive data connections. Starting with SP15, active connections will be available.
    Difference between active and passive,
    You can definitely refer to the site mentioned by Suraj
    cheers
    Sameer

  • Says i don't have active internet connection and i do

    I can't access the itunes store.  Says I do not have an active internet connection and I do. All three of my computers are saying the same thing.  What do I need to do?

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • Sloooow internet - Active Internet Connections??

    Hi Everyone, this is my first time posting anything on here so please be gentle
    My internet runs very slow. This is an intermittent problem. Right now, for example, I can browse the net without much hassle. At other times, I try to check hotmail, for example, and it simply times out after several minutes.
    My internet provider did several checks and came to the conclusion that there is nothing wrong with the line and the bandwidth I'm getting.
    They then asked me to go to the NETWORK UTILITY, choose NETWORK INTERFACE (en1) under INFO and then choose DISPLAY THE STATE OF ALL CURRENT SOCKET CONNECTIONS under NETSTAT. I ran this and it came up with 27 active internet connections. I have no idea what these all are. There are also many more active LOCAL (UNIX) domain sockets.
    The guy on the phone told me there should only be around 10 of these active connections and that more than 10 suggest a virus or spyware. I ran some virus software and it found 0 viruses. I just spoke with Apple Support and they told me that this information was incorrect and that it only applies to a PC and that a MAC cannot get a Virus or Spyware. Their suggestion was that I TURN OFF my firewall and see if it helps with internet speed. This seems like bad advice to me.
    I'm now completely stuck as to where to go from here. If anyone out there has any idea I would be extremely appreciative of some help!
    thank you in advance,
    Dylan31

    Hi Dylan and welcome to the forums!
    Who is your ISP? Their comment is wrong, and Apple are correct.
    Try this:
    (First, if yours is an Intel Mac, check that Safari is not running in Rosetta, which is enough to slow it to a crawl. If you are running Snow Leopard, run Safari in 32 bit not 64 bit.)
    Do you have enough RAM? Less than 1GB can cause slowness. Is your hard drive too full? Less than 15%, or 15GB, of free space can also cause slowness.
    Adding DNS codes to your Network Preferences, should give good results in terms of speed-up as well as added security:
    If you are using a single computer: Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
    208.67.222.222
    208.67.220.220
    (You can also enter them if you click on Advanced and then DNS)
    If your computer is part of a network: please refer to this page: http://www.opendns.com/start/bestpractices/#yournetwork and follow the advice given.
    (An explanation of why using Open DNS is both safe and a good idea can be read here: http://www.labnol.org/internet/tools/opendsn-what-is-opendns-why-required-2/2587 /
    Open DNS also provides an anti-phishing feature: http://www.opendns.com/solutions/homenetwork/anti-phishing/ )
    Wikipedia also has an interesting article about Open DNS:
    http://en.wikipedia.org/wiki/OpenDNS
    Whilst in System Preferences/Network you should also turn off 'IPv6' in your preference pane, as otherwise you may not get the full speed benefit (the DNS resolver will default to making SRV queries). If you want to know what IPv6 is:
    This is Apple's guidance on iPv6:
    http://docs.info.apple.com/article.html?path=Mac/10.5/en/8708.html
    Click on Apply Now and close the window.
    Restart Safari, and repair permissions.
    If that didn't do it, then try this as well:
    Empty Safari's cache (from the Safari menu), then close Safari.
    Go to Home/Library/Safari and delete the following files:
    form values
    download.plist
    Then go to Home/Library/Preferences and delete
    com.apple.Safari.plist
    Repair permissions (in Disk Utility).
    Start up Safari again, and things should have improved.
    More useful information here:
    http://guides.macrumors.com/SpeedupSafari

  • When trying to update my CC apps, the update fails. I get this error: Update Failed. There was an error installing this update. Please try again later or connect customer support. This is currently happening for InDesign, Photoshop and Bridge. I had this

    When trying to update my CC apps, the update fails. I get this error: Update Failed. There was an error installing this update. Please try again later or connect customer support. This is currently happening for InDesign, Photoshop and Bridge. I had this problem previous and was able to fix by doing a complete wipe of my computer and reinstalling CC. However, I should not have to wipe my computer clean everytime I need to do a CC update. HELP!

    Hi,
    Please download the updates directly from the link below:
    WIN: All Adobe CC 2014 Updates: The Direct Download Links for Windows | ProDesignTools
    MAC: All Adobe CC 2014 Updates: The Direct Download Links for Mac OS | ProDesignTools
    Regards,
    Sheena

Maybe you are looking for

  • How do I change my iCloud account to my new appleID account? The original email account no longer exists.

    Helpme. My email address for icloud no longer exists. I need to wtich it to the new apple ID account on icloud but its faded in Gray on my phone.

  • Can you tile windows from Javascript in CS3?

    I have a javascript that will open 2 images in Photoshop from different directories based on a single filename, so that the users can view them side by side. They need this to be able to compare the colour correction from an automated process against

  • IPhone "Usb Not Recognised"

    Hi, I know there have been loads of similar questions since the iOS 5 and Itunes 10.6 update. I recently got a new laptop and have tried to plug my iPhone in for the first time yet a "Usb Device is not Recognised" keeps showing up. My iPhone does not

  • Reg: File to Idoc Hierarchial mapping

    Hi Experts, We have a scenario of flat file to idoc where in we have 4 segments(01 to 04)(with hierarchies) in source file to be mapped to idoc. We have followed Riaz blog    http://www.riyaz.net/blog/xipi-convert-flat-file-to-deeply-nested-xml-struc

  • Manage AUDIT using  different user

    Dear Friends , I have to run audit trail in my production database which only gathered user session related information . I just run following two lines as 'SYS' user : SQL> conn sys/password as sysdba SQL> audit session whenever successful; Audit su