CS3-Entry Point Not Found

Hello-
I'm running WinXP SP3.
I have Photoshope CS3 and have recently installed Flash CS4.
Whenever I double-click a Photoshop file to open/edit it in Photoshop, just as it is about to finish "Initializing panels..." an error box pops up saying: "Photoshop.exe - Entry Point Not Found" "The procedure entry point IsThreadDesktopComposited could not be located in the dynamic link library USER32.dll."
After the box pops up I press the "Okay" button (that's the only one there) and it then opens Photoshop - which works perfectly.
No other errors, no missing functions, no lag.
Still, it's become quite annoying to start the program like this everytime and I'm pretty sure getting an error during start up is a good indication that not everything is 100%.
Does anyone have any suggestions about what I should do?
I also attached a picture of what I get in case it's helpful in some way.
-PT

You could try resetting your preferences as described in the FAQ.
http://forums.adobe.com/thread/375776?tstart=0
You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
This resets all settings in Photoshop to factory defaults.

Similar Messages

  • Photoshop.exe - Entry Point Not Found (MSVCP80.dll)?

    Hey guys, new to the board here and pretty much at the end of my rope.
    Starting maybe 2 days ago I began getting quite a strange message when I tried to open Photoshop CS3.
    I'd send a jpeg of the window but with photoshop down i'll settle for just typing this crap out:
    Photoshop.exe - Entry Point Not Found
    The Procedure entry point ?replace@?$basic_string@DU$char_traits@D@std@@V?$a llocator@D@2@@std@@qaeaav12@IIPBD@Z could not be located in the dynamic link library MSVCP80.dll
    Now, that's a mouthful! Fortunately i'm at least computer literate enough to dig around on google.
    After doing that, I came up with nothing. I found a replacement for the DLL that it's having trouble with, but that did nothing.
    I then tried out a program called Registrybooster, which found quite a few problems with my registry but failed to correct whatever is causing this problem.
    So I tried to backtrack a little bit and see if anything I had done since the last time the program worked (wednesday the prior week) had broken it. I had shut off some startup programs so i figured maybe that had something to do with it. Unfortunately undoing those changes had absolutely no effect at all.
    I then tried out doing a repair install, which did nothing. After this, I did an uninstall and reinstall and... nothing.
    Some extra info: I run windows xp home edition on this PC and have it updated to SP3.
    I've had photoshop on it for about a year with no problems.
    Hopefully someone can help me here. Almost every thread I located with similar problems via google either went unanswered or the answers given didn't actually help me out.
    Someone save me!

    Hi Chris, thanks for chiming in on my problem.
    I'm doubtful of it being TWAIN/WIA caused, but will look into it. I have a wacom tablet and a canon scanner so who knows. What would you suggest I do to see if those two are causing anything in particular? (Not sure why they would as I haven't made any changes to the programs or hardware involved recently.)

  • Error message when clicking on links from thunderbird: Firefox.exe – Entry Point Not found

    When I click on any link in a Thunderbird email message I get the error message:
    Firefox.exe – Entry Point Not found
    The procedure entry point ?DllBlocklist_Initialize@@YAXXZ could not be located in the dynamic link library T:\PQligP sFuvy (X86)\pJPpSox HneiCFv\GwCMqTQ.Oqt.
    I tried uninstalling Firefox 27 completely and reinstalling it, and the error is still there. When I uninstall V27 and install the older V26 the error disappears. Id there an issue with V27 trying to work with links from Thunderbird?
    I am on a laptop running Windows 8.1 with all current downloads.

    Thanks for the reply - as best as I can tell it seems to be some kind of incompatibility between Thunderbird V24.3.0 and Firefox V27. If I install Firefox V26 then everything works as it should. I haven't tried installing a previous version of Thunderbird to see if that makes a difference.

  • Why is my itunes not installing properly? I installed it and it was fine, then it started to show Errors. iTunes exe - Entry Point not Found. And the Error 7 (Windows error 127).Itsays to reinstall iTunes. I did that and same error. new pc, same on old

    Why is my itunes not installing properly?
    I installed itunes day before yesterday,  I spent hours last night linking all my music photograph and movie files, its a new windows 8 laptop.
    I plugged in my 64GB ipad 3 rebooted it and reloaded all the information I wanted on it, took hours... finally completed this this morning. After this I restarted the laptop to configure my icloud link for the laptop (which I installed last night while I was loading files, I chose to restart later)
    on completion I turned my laptop off for a few hours, when I turned it back on I went to itunes to connect my iphone to do the same and I got this message:
    iTunes exe - Entry Point Not Found
    The procedure entry point
    AVCFPlayerAppliesMediaSelectionCriteriaAutomaticallyKey could not
    be located in dynamiclink library F:\Programmes\iTunes.dll
                                                                                               OK
    then after pressing 'OK' the following message:
    iTunes
    iTunes was not installed correctly. Please reinstall iTunes
    Error 7 (Windows error 127)
    I went back to apple website to reinstall iTunes, first reinstalled it same again, then unsinstalled it and the reinstalled it, same again.
    The same thing happened with my old lap top and I replaced it with this new one at the start of the week.
    Has anyone any idea what is going on and how to rectify this problem, I am now going on 3 weeks without iTunes.
    Regards,
    Damian36

    I started up and plugged in my iPad  and then the following message came up:
           iTunes
    ❗️This iPad cannot be used because the required software is not
        Installed. Run the iTunes installer to remove iTunes, then install
        the 64-bit version of iTunes.
                                                                                             OK
    I then proceeded to the "iTunes64Setup" expanded folder to load "AppleMobileDeviceSupport64"
    Started the install and then received this message:
          Apple Mobile Device Support
    ❗️Service 'AppleMobile Device' (Apple Mobile Device)
        failed to start. Verify that you have sufficient
        Privileges to start system services.
       Abort.               Retry.                Ignore
    I tried all tree options, last being ignore.
    I continued to download the other 2 you suggested with out any drama.
    I did a system restart and then opened iTunes.
    Connected my iPad
    Then message appears:
          iTunes .exe - System Error
    ❌ The program can't start because CoreAdioToolbox.dll is missing from
          Your computer. Try reinstalling the program to fix the problem.
                                                                                           OK
    Press OK and then the next message:
           iTunes
    ❌ iTunes was not installed correctly. Please reinstall iTunes.
          Error 7 (Windows error 126)
                                                                                           OK
    Any suggestions?

  • Crystal Reports 2008-Vista-ERROR-crw32.exe Entry Point Not Found in dll

    Hi Experts,
    I just installed the Crystal Reports 2008 (with SP0) on my Vista (Home) machine.  When I try to start the CR 2008, I am getting the below error message:
    Error Title: crw32.exe - Entry Point Not Found
    Error Message: The procedure entry point ?PrintLegend@CMapXLegend@CSLib300@@QAEXJJJJJ@Z could not be located in the dynamic link library cslibu-3-0.dll
    Here are the things I tried to resolve the above problem:
    1) Uninstall and Reinstall the CR 2008.  -  No change.
    2) I configured the DEP to accept Crystal Reports (Performance - Advanced - DEP allow). 
    None of these seem fix the problem. 
    Can you please help me kick start the Crystal Reports 2008? 
    Thanks,
    Arun

    Please try with this:
    Run a command prompt as administrator. From the start menu, select "All Programs", then "Accessories" and right-click on the "Command Prompt" shortcut and choose "Run As Administrator". From here you can use the following command to disable Data Execution Prevention (DEP) with the following command:
    bcdedit.exe /set nx AlwaysOff
    Keeping your command prompt open, run your setup or other process being stopped by DEP. Then, to turn it back on again, do the same and run the following:
    bcdedit.exe /set nx AlwaysOn
    Regards,
    Shweta

  • When I connect my new ipod nano to my laptop (using windows)I get an error message saying "itunes.exe - entry point not found" I cannot access my itunes , or download a new version. Any ideas what to do or what is causing this?

    I have been given a new ipod nano to replace my much loved but old ipod. When I plug it into my laptop to sync it I get an error message stating "itunes.exe - entry point not found. The procedure entry point AVCFAAssetCreateWithByteStreanAndOptions could not be located in the dynamic link library
    AVFoundationCF.dll" I cannot acces my itunes or download a new versiona as this keeps flashing up. Any ideas? Please help, my life is meaningless without my music!!

    Also I now can`t access any of my itunes library and am concerned that if I remove it from my computer I will lose everything as I have no option of accessing and therefore backing anything up. Any ideas?

  • I see a AppleSyncNotifier.exe - Entry Point Not Found error when my PC starts.

    when booting up my computer, even before I try to bring up itunes, I get the following error message:
    AppleSyncNotifier.exe - Entry Point Not Found
    the procedure entry point ___cfconstantstringclassreference could not be located in the dynamic link library core foundation.dll
    But once I click off the message, everything seems to work fine.
    how can I correct this problem?
    2 IPod 5.1.1
    1 IPad 2 wifi
    Windows Vista 32

    Try here >  http://www.pchelpforum.com/xf/threads/applesyncnotifier-exe-entry-point-not-foun d.124298/

  • TNS Listener: Entry Point Not Found

    First I installed 8.1.6 Personal edition
    on my laptop (NT4 SP5):
    Folder: d:\orant.
    Oracle Home: DEFAULT_HOME
    That went fine. I could connect to the database with SQLPLUS, DBA etc.
    Then I tried to install Portal using:
    Folder: d:\9iAS
    Oracle Home: iSuites
    Spent three days trying to get Portal to install ok. Have finally got through the installation of 9iAS (HTTP Server Only), which the Universal Installer claims to be successfull.
    Started the Apache Server and tried to connect to the portal. I get the following error message:
    Proxy log On failed.
    Please verify that you have specified correct connectivity information i.e.username, password & connect-string in the Database Access Descriptor
    Error-Code:12154
    Error TimeStamp:Tue, 23 Jan 2001 23:20:00 GMT
    Database Log In Failed
    TNS could not resolve service name
    Verify that the TNS name in the connectstring entry of the DAD for this URL is valid.
    I can access the admin page:
    http://<machine>:80/pls/admin_/
    To debug this I tried to connect to the database with SQLPLUS and I got this error message:
    I:\>sqlplus
    SQL*Plus: Release 8.1.7.0.0 - Production on Tue Jan 23 16:08:58 2001
    (c) Copyright 2000 Oracle Corporation. All rights reserved.
    Enter user-name: system
    Enter password:
    ERROR:
    ORA-12560: TNS:protocol adapter error
    Enter user-name:
    Checked my Services and found that the TNS listener was not started. When I try to start the OracleDEFAULT_HOMETNSListener in my Services I get the following error message:
    TNSLSNR.exe - Entry Point Not Found
    The procedure entry point snlpcgtsrvbynm could not be located in the dynamic link library oranl8.dll.
    I have tried swicthing my primary Oracle Home using the Home Selector. Did not help.
    Shouldn't the TNS listener be started, or?
    Any ideas what to check?

    I have found the solution of my problem from Oracle9i Portal's Configuration Guide , the troubleshooting part. The document can be found in the Oralce9i Documentation web site.
    The problem is that I set the incorrect information in my tnsnames.ora file when installing Oracle9i Portal.
    The solution is set the host name, port number and SID in the tnsnames.ora file. This file is located at
    \Oracle_Home\network\admin\
    Here is the example of the content in that file:
    PORTALDB_MyHost =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = MyHost)(PORT = 1521))
    (CONNECT_DATA = (SID = PortalDB)(SERVER = DEDICATED))
    INST1_HTTP =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = MyHost)(PORT = 1521))
    (CONNECT_DATA = (SERVER = SHARED)(SERVICE_NAME = PortalDB)(PRESENTATION = http://admin))
    EXTPROC_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
    (CONNECT_DATA = (SID = PLSExtProc)(PRESENTATION = RO))
    ---------------------------------------------

  • Satellite P300: BSOD error STOP: c0000139 {entry point not found}

    I've been having this error for a few weeks on my Toshiba P300.
    When I start my notebook there appears a blue screen with an error for a split of a second:
    STOP: c0000139 {entry point not found}
    The procedure entry point ntoskrnl.ExiAcquireFastMutex could not be located in the dynamic link library Hal.dll.
    Then Windows Vista starts normal.
    I don't get this error when i start the computer from hibernate. What does this error mean??
    I also have problems with my integrated webcam. I get the message: 'locked by another application'. I already reinstalled the software I downloaded from the website, but that didn't help. Does the error have something to do with the webcam that doenst work properly??

    I dont know what the problem can be but you should use system restore tool and rollback OS to earlier time before this error message started.
    About webcam issue please visit http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=131308

  • Apple Software Update error- "Entry Point not found"

    I have had Apple Software Update/ iTunes on my PC for over 4 years. Today, randomly, when I went to update iTunes to the new 10.5 version, Software Update did not prompt me to update. That was odd, but I didn't realize anything was amiss yet at this point.
    In iTunes, I went Help > Check for Updates which indicated the new version was downloaded. When promted whether I'd like to update, I hit yes, which even more oddly took me to apple.com to download iTunes all over again. (Normally, updates download from within iTunes and it's an update, not a full hour-long re-download.)
    I didn't want to redownload iTunes (what would happen to all of my previously downloaded apps and music, set playlists?) so I opened Software Update, and got the following error message:
    SoftwareUpdate.exe - Entry Point Not Found
    The procedure entry point ?CreateProductsFromXML@CSUCatalogObject@@QAEXP6AIPAXIIJ@ZOIV?@CStringT@WV?$StrT raitMFC@WV?ChTraitsCRT@W@ATL@@@@@ATL@@@Z could not be located in the dynamic link library SoftwareUpdateFiles.dll
    Strange, right?
    So my questions.
    1.) Does anyone know why Apple Software Update would suddenly get errors? I've used it recently (this past weekend?) and everything was fine.
    2.) Is there a way to fix Software Update, since I'll surely need it in the future.
    3.) In the meantime, should I proceed with re-downloading the full version of iTunes again, and will it mess up anything I currently have in my iTunes library? Would I need to back it up or do anything to help ensure there are no further problems?
    Thanks for your help. To say I'm confused is an understatement!

    Well... after I posted this, some info from other posts came up and I found the answer!
    In case anyone has the same issue that runs across this... this worked for me perfectly.
    Correct Answer by Sposivo  on Aug 19, 2011 5:23 PM
    "Start, Control Panel, Add & Remove Programs, Apple Software Update, Change, Repair"  - this fixed it for me.
    See the answer in context

  • Help! Another "Entry Point Not Found" Error

    Hello,
    I purchased iPhone 4 earlier this week and went to synch it last night. Apple Updates updated and crashed several times, now iTunes won't even start. I already had it set up for my iPod, my iPad, and a prior iPhone, so just plugged my new iPhone in and went to town. iTunes did update all my apps before I used Apple Update. I was trying to get the OS updates for both my iPhone and iPad, but now it doesn't work. I tried downloading iTunes again and running the fix and it didn't work. I am runing Windows 7 64-bit.
    Here is my error message:
    iTunes.exe - Entry Point Not Found
    The procedure entry point
    kCMByteStreamNotification_AvailableLengthChanged could not be
    located in the dynamic link library CoreMedia.dll
    Then a second dialog box pops up that says:
    iTunes
    Itunes was not installed correctly. Please reinstall iTunes.
    Error 7 (Windows error 127)
    Please help!
    Thanks, Sean

    Hi vladdy007,
    Please upgrade your OS to Win XP SP3. This would fix the problem. The minimum spec for running AI CS6 is Win XP SP3.
    Thanks and Regards,
    Nishant Kumar Thakur

  • Xcelsius exe won't launch - Entry Point Not Found message given

    -Operating System: Windows XP
    -OS Patch level: SP3
    -Office Version: 2007
    -Flash Player version: Adobe Flash Player 10
    -Xcelsius Version and Patch Level: Xcelsius 2008 5.3.0.0
    -Xcelsius Build number (Help>About Xcelsius): <not accessible>
    -Business Objects Enterprise version/patch level (if applicable): Crystal Reports 12.1.0.892 - SP1
    -Issue Description: Xcelsius exe won't launch - Entry Point Not Found message given
    -Steps to Duplicate: When I try to open Xcelsius.exe, I receive a message box that says "Xcelsius.exe - Entry Point Not Found" "The procedure entry point ?LevelDiffToFirst@CTreeBtnCtrl@@QAEHPAU_TREEITEM@@@Z could not be located in the dynamic link library TreeBtnExtDll.dll."
    I have uninstalled and re-installed Xcelsius with the same results.
    Also, when I open Crystal Reports 2008, the "Crystal Reports 2008 SP1 - Software Manager" opens and shows an update available - SP2. When I try to install the update, it downloads and then displays a message the this update is only available for Crystal Reports 2008 SP1. I believe that is my current version.
    After some research, I believe my CR Runtime app may be a different version than what Xcelsius.exe is expecting, but I don't know how to check or fix that. Any help is appreciated.

    Hi
    I think I've managed to fix this error. I compared the TreeBtnExtDll.dll in my Xcelsius directory on the machine that wasn't working and one that was and found that the broken machine was using an older and smaller version of TreeBtnExtDll.dll. 89k and a date in 2008 I think. So I copied my newer version which was 109 k and dated 11/2009 into the C:\Program Files\Business Objects\Xcelsius directory of the broken machines and now xcelsius appears to be working fine.
    I had lots of trouble installing the SP3 release because of the media issues so maybe the install wasn't complete.
    Anyway, I hope this helps you
    Rowena

  • Updated to 10.5 on XP and now iTunes will NOT open - Entry Point Not Found - HELP!

    Tried to update to iTunes 10.5 on Windows XP.  Everything seemed to install properly and I restarted.  However, when I try to open iTunes, it will not open and I get the following error message:
    iTunes.exe - Entry Point Not Found
    'The procedure entry point AVCFAssetClassWithByteStreamAndOptions coulf not be located in the dynamic link library AVFoundationCF.dll'
    When I click 'OK' (which is the only option), it says:
    'iTunes was not installed correctly.  Please reinstall iTunes.
    Error 7 (Windows error 127)'
    I have updated iTunes on my machine in the past numerous times without ever having an issue.  Now, I get this and cannot access iTunes at all.  I have tried reinstalling 10.5 and restarting my machine about five times now...to no avail.  I am hesitant to remove iTunes, since I have 6000 songs and do not want to lose my library.  Is there anything I can do?  Seems like it should be a simple fix.
    When I called Apple, they told me to upgrade my OS to Vista.  Huh?  That seems like overkill to me.  iTunes has always run fine on XP.
    Please help!

    I found another site and it suggested that I go through System Preferences and check downloads again.  The iTunes update was still there indicating that it still needed to be downloaded.  So I downloaded it again and now it works fine.  I hope this might help someone else.
    Thank you

  • Entry point not found - iTunes 10.7 for Windows (64-bit) reinstall

    After ignoring iTunes update prompts for about 2 years, I recently tried updating to the latest version (12.1) without success.  After searching for solutions to this problem online, I decided to uninstall iTunes and try reverting back to iTunes 10.7 for Windows 64-bit (on my Windows Vista laptop).
    At this point I have installed, repaired, uninstalled, reinstalled, and repaired the 10.7 version and am still unable to access iTunes.  When I try to launch iTunes, I get the following error messages:
    "iTunes.exe - Entry Point Not Found
    The procedure entry point CMTimeRangeMakeFromDictionary could not be located in the dynamic link library CoreMedia.dll."
    When I click OK, I then get:
    "iTunes was not installed correctly.  Please reinstall iTunes.
    Error 7 (Windows error 127)"
    (As I stated above, reinstalling hasn't worked!)
    In my online troubleshooting searches, I've found posts regarding entry point issues but none with "CMTimeRangeMakeFromDictionary" or "CoreMedia.dll" in them.  I'm unsure what to do next (should I attempt iTunes 12.1 again?), and my biggest concern is that I will somehow lose all my music.  Any help would be greatly appreciated!  Thank you

    Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. CoreMedia.dll is part of Apple Application Support.
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If the advice above doesn't resolve things you could try this alternate version:
    iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
    which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
    Or roll back to the previous build:
    iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
    iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
    tt2

  • OutlookSyncClient.exe - Entry Point Not Found

    I'm at wit's end with this. I've spent most of last night, and this morning trying to track this down. It all started with the iTunes 7.7 update, but it didn't happen until I started syncing Outlook with MobileMe. I get two error messages, about every 15-20 minutes. MobileMe is set to sync "automatically." At one point, I was getting and error message stating that MobileMe couldn't sync and to check my settings. The settings were right, and apparently in my troubleshooting steps I've made that error go away.
    OutlookSyncClient.exe - Entry Point Not Found
    The procedure entry point MAPIInitialize could not be located in dynamic link library MAPI32.DLL
    It has nothing but an OK box, I hit that, and directly after I get another one with the exact same message.
    The best part is, the syncing is working fine with MobileMe. These error messages are driving me nuts.
    I uninstalled my Nokia's syncing software BEFORE I attempted to even setup with MobileMe (the Nokia was my pre-iPhone-phone). I've uninstalled/reinstalled iTunes. I've uninstalled/reinstalled Office 2003 and its service pack. I've completed all critical updates to Office. I'm running XP Pro SP3 with all critical updates completed. I've also manually deleted the MAPI32.DLL file and ran FIXMAPI to replace it with a good copy.
    UPDATE: When I previously stated that I got rid of the MobileMe Sync error message, I apparently have not. It pops up randomly and says:
    The sync failed because MobileMe is not property configured on your computer.
    Make sure your settings are correct under the Sync tab in the MobileMe preferences on this computer.
    They are correct. If I hit the Sync Now button, everything goes smoothly.
    Any ideas before I just set fire to this thing?
    Thanks in advance for any assistance.
    Message was edited by: supradave

    UPDATE - (Made a second post so it'd be clearer)
    I uninstalled Office 2003, then iTunes, then all of the associated software (Mobile Device Support, Apple Update, Quicktime, EVERYTHING)
    Reinstalled Office 2003, then Office 2003's Service Pack 3, then all Microsoft Updates for Office 2003. Then I configured a blank Outlook profile, no data other than the IMAP info for my .Mac/Me account. Then I downloaded (didn't used my existing copy) of iTunes 7.7 and reinstalled. Sync'd phone. Changed MobileMe settings. Told it to sync contacts and calendar with Outlook. It warned me because it was the first sync. Told it to take ALL of the MobileMe data and replace the data on the computer (which was blank.) NOTHING showed up in Outlook. When I tell it to sync Contacts with the Windows Address Book, it works fine.
    In Conclusion, it still won't sync with Outlook, when it's set to Sync with Outlook I still get the annoying MAPI errors. So I switched to to Sync the Contacts with the Windows Address Book, and I'm backing up my WAB file now with my nightly backups.
    I suppose we'll see if it gets fixed when I format/reinstall on Vista Ultimate in the next month or two. If anyone has any suggestions, I'm open and willing to try them.
    On a completely unproductive note: Despite my love for Exchange, I hate MAPI.

Maybe you are looking for

  • HP Expert Day - April 18, 2012: Got Questions? Ask the HP Experts!

    Thank you for coming to Expert Day – the event has now concluded. **To find out about future HP Expert Day events, check out this page** On behalf of the Experts, I would like to thank you for coming to the Forum to connect with us.  We hope you will

  • Does the Dreamweaver 30-day trial work with the tutorials?

    I've been trying to learn the essentials but it doesn't seem to match the tutorials...there is no title bar, the download file names/folders don't match, etc...am I missing something?

  • Problem in Batch Determination

    I think that I did all configuration necessaries but the batch determanation dont work. In delivery on the screen Batch Determin. I can check that the condition record was found on procedure. And in the log Log, i get : Batch stocks are being read...

  • Reader Software Sync Issue

    Sony has received reports from a number of PRST1 owners that the Reader software has been causing bookmarks and notes to be duplicated with some of their books. Sony engineering is aware of the issue and is currently working on a solution which will

  • Fake marketing

    I received a mail from Adobe telling me in the title that "New benefits added to your Creative Cloud membership". In the mail I could read "What's new for you in Creative Cloud" and I was promted to download Muse and other titles. The problem is that