CS3 InDesign Stroke panel not showing

I use CS3 on a MacPro.
I've just found that the Stroke panel does not show in InDesign, so I cannot add or change the stroke on graphics.
Unlike all [as far as I've explored so far] the other Window options, when I click on Stroke I do not get a full panel of options, only a thin (vertical) bar –presumably the left and right sides of the panel, collapsed together.
This has never been a problem before and it happens in any choice of Workspace.
Any ideas, PLEASE?
Mike

Thanks Peter
Sorry I didn't spot that your first message was a link to a solution.
It worked fine. (I moved InDesign Defaults and InDesign SavedData to a temporary folder on the Desktop, started up InDesign again, and Stroke panel worked again. I was also relieved to find that, for instance, my Character and Paragraph Styles weren't lost, nor my Workspaces of choice. Without exploring too closely, all I've noticed is that Open Recent files have gone, which is absolutely no problem.
Thanks again.
Mike

Similar Messages

  • Bridge cs3 and content panel not showing all images

    I am using Bridge CS3
    If I scale my panel images down very small all are visible. If I enlarge the images beyond the visible area, a scroll bar appears. However if I move the scroll bar to the end, it does not show the last two images. I cant get to them
    Any suggestions on what is happening
    Jack

    Jacj,
    Did you ever find a solution to this problem. I am faced with same problem as detailed by you and here:
    http://forums.dpreview.com/forums/read.asp?forum=1004&message=27027323
    I do not see a great solution in the posts at attached link, other than perhaps resetting workspace.
    Thank you,
    J

  • JColorChooser : "Swatches"-tab's recent-panel not showing recent color

    Hello all,
    in JColorChooser on "Swatches" tab we have one panel named "recent" and another
    named "Preview".
    Problem 1.
    After i close my Color-chooser-dialog and reopen again , Preview-panel shows
    the last selected ie recently selected color BUT recent-panel not showing any color.
    Although on other Tab like "RGB" i am getting the selected color's RGB values .
    Below is the code-snippet , Am I doing anything wrong ?
    Problem 2.
    This problem is not consistent. What happens that whatever RGB values i set,
    next time when i open the chooser , Red-value gets educed by 1 !!!
    /// code snippet
    Color defaultForeground = conFont.getForeground(); /// this gives last selected color
    Color newColor = JColorChooser.showDialog(GSCommonUtility.getAMStudioFrame(),CommonToolProperties.bundle_ToolProperties.getString("ComContributionsAdapter_ChooseForeground"),defaultForeground);
    Can someone please through some light on these 2 problems?
    thanx n regds,
    Rajesh

    I'm having the same problem with the default color chooser. Whenever it is closed it seems to lose all of the recent colors information. If you figure it out please let me know!!

  • CS3: Premiere eequence marker not showing up in Encore

    I've set up sequence marker in Premiere and export the clip using Adobe Media Encoder. But they are not showing up in CS3. In CS2, it worked.
    How could I get the marker to show up as chapters?
    Thanks!

    Howard Hoffman, "CS3: Premiere eequence marker not showing up in Encore" #, 15 Dec 2008 5:13 am

  • Traffic Lights For Hyperlinks panel not showing. INDESIGN.

    My traffic lights for the hyperlinks panels are not showing and I have the latest version of CC. How do I show/hide them? Thanks

    First, make sure you have InDesign CC 9.2.1. Choose InDesign > About InDesign (Mac) or Help > About InDesign (Windows).
    If you're up-to-date, try restoring your preferences:
    Trash, Replace, Reset, or Restore the application Preferences

  • Window panels not showing

    None of my windows panels are showing up (the ones that are located on the right by default, i.e: layers, stroke, swatches etc).
    I tried changing my workspace to different things but no panels are showing up. I also tried resetting my workspace and quitting illustrator.
    Even individually clicking on each panel under the Window menu won't help.
    This started happening today after I updated to the latest version of Illustrator CC 2014

    Julian,
    You may try the relevant parts of the list (5) is least likely to help).
    The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
    If possible/applicable, you should save curent artwork first, of course.
    1) Close down Illy and open again;
    2) Restart the computer (you may do that up to at least 5 times);
    3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
    4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
    5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
    Even more seriously, you may:
    6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
    http://www.adobe.com/support/contact/cscleanertool.html

  • XMP panels not showing up in CC

    We created custom XMP panels before. I now want them to show up in CC. I can get the tab open to show the file (this happens when I "Get Info" on the InDesign page), but it crashes InDesign and won't show the fields. Do I need to update the Flash file, or get to a different location? Is it the permissions? Am I just crazy?
    In CS6, here's where I'd put stuff:
    UI for XMP panels:
    Mac\Library\Application Support\Adobe\XMP\Custom File Info\Panels\3.0\panels\IEEECS\bin\IEEECS.swf
    or
    /Library/Application Support/Adobe/XMP/Custom File Info Panels/3.0/panels
    Where am I putting these things in CC? Am I putting it here?
    /Users/ME/Library/Application Support/Adobe/XMP/Custom File Info Panels/4.0
    I'm tired of crashing my InDesign CC. Any help is appreciated. Thanks!

    Hmm....I updated my Flash. Using Mac OS 10.8.5. Didn't work. I can open the other File Info Panels and manipulate them, but the second I try to use mine, I get the blank screen and I have to Force Quit out of InDesign cc.
    I have no problems using my panels on my PC. This is frustrating, but not sure how to solve it. Obviously I can see the main panel, but just not the actual fields. So I must have it in the correct place.
    Other than Flash, any other suggestions? I'll try to ask around. Thanks!

  • Search hover panel not showing up in Internet Explorer with custom master page

    The hover panel is not showing up in internet explorer.  I am using a custom master page and it works no problem in the other browsers.  When I fire up the debugger there is an error message when i hover over a search result item:
    I tried debugging the JavaScript but i am not sure what is going on with it.  
    Am I missing reference or something done like that?  It has to be something simple because I have been scratching my head for a while on this.  
    Any ideas?  
    Brad Wight

    Have you tried rendering the site in IE Compatability Mode?  Compatability Mode solves a lot of problems in this area because older versions of IE had a unique interpretation of HTML code.
    Start here: 
    http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-8
    I trust that answers your question...
    Thanks
    C
    |
    RSS |
    http://crayveon.com/blog |
    SharePoint Scripts | Twitter |
    Google+ | LinkedIn |
    Facebook | Quix Utilities for SharePoint

  • [CS3 - Win] Smart Guides not showing up when Snap To Grid enabled

    Has anyone else encountered this bug?
    AI CS3 13.02
    Smart Guides are turned on, but hovering over items does not show the cyan hints, snapping to anchor points / paths etc does not work. This only occurs when Snap To Grid is enabled. If you then go and turn it off, the Smart Guides start working again as expected.
    Is this a known bug?
    Tom

    Thanks for the reply Mike. Smart Guides work perfectly for me provided Snap to Grid is turned off.
    I can see there being a conflict between snapping to grid and smart guides in CS3 - which takes precedence? From a UX perspective, if these two snapping modes are mutually exclusive, there should be at the very least an alert letting you know the other mode is disabled; the menu item should be greyed out. Or if it's truly an either-or situation, then the menu needs to be revised such that both snap to grid and smart guides are within the same submenu, and only one can be selected at a time, toggle with CMD+SHIFT+OPT+U.
    T

  • Jmf audio and video control panel not show up in netbeans

    I am running AVReceive2 in netbeans. The control panel does not show up when I run this in Netbeans. When I run the same code in DOS I get the control panel. The core component to the panel has not been changed. Am I missing something. I just reinstalled everything and still have the same problem. I need to get this resolved ASAP. Thank you for all the help.

    Laughincrow wrote:
    Can you send me an image of what you are talking about? I think I have it set but I am not 100% sure.No, I can't send you an image. You should consult with a Netbeans forum if you need help with Netbeans beyond what I've told you.
    Also, I can't think of anything that would cause that problem other than library issues, because it sounds like you have JMF installed correctly if it works in a terminal, but Netbeans overrides your system settings to use its own.

  • Document/Text Panel not showing

    Here I go again, another problem. I now find that my one
    panel that has the document, text, object size, etc. panel is not
    showing, the other two do. Have no idea what happened. Tried to
    hide and un-hide all panels to no avail. I read the other threads
    about toolbars missing, but this is a panel and only 1 is now
    missing. Does anyone have an idea how I can get this to reappear?

    You may have simply closed it by hitting a key command. If
    you are
    referring to the Object Inspector it's default key command is
    "cmd I" if
    it is grouped with other inspectors the whole group will
    appear/disappear with the key command. You can also turn them
    on and off
    through the Window > Inspectors menu.
    Rich
    Biker King wrote:
    > Here I go again, another problem. I now find that my one
    panel that has the
    > document, text, object size, etc. panel is not showing,
    the other two do. Have
    > no idea what happened. Tried to hide and un-hide all
    panels to no avail. I read
    > the other threads about toolbars missing, but this is a
    panel and only 1 is now
    > missing. Does anyone have an idea how I can get this to
    reappear?
    >

  • Extenion Panel not showing installed addons

    Hi - I have bought a numer of 'add ons; using the creative cloud add-on section of the adobe site. Only one (a free one called Krul) appears. The rest are noweher to be found in the extensions panel. I see the in Extension Manager but not in cc 2014 Extensions Panel .. can anyone give me help ?

    Thank you for the advice
    Platform is MAC Pro Late 2013 model 3.5Ghz - 6 Core running  OSX  10.9.4
    I have both Photoshop CC and CC 2014- On CC 2014 Extensions Panelshows Krul only, on CC Extensions Panel is Greyed Out
    Bridge is the CC version
    machine specs:  total installed RAM 32Gb
    scratch file HD is 4 TB Lacie Thunderbolt RAID
    video card specs - Twin D700 6Gb cards with twin 27" Thunderboth screens
    what troubleshooting steps you have taken so far - Reinstalled all CC apps including Extension Manager .. still the same issue .. Purchased Add Ons - Softskinning - Adobe Watercolour - Adobe Watermark and 20 HDR Effects do not show up in the Extensions panel or indeed in actions. 

  • Navigation Panel not showing up the links

    Good Afternoon SAP Experts,
    After applying support package 20, portal is not showing the links on navigation panel when accessed by an regular user. However, if you access portal with a super admin user the links appears.
    It's important to say that this is occuring just on Default Framework (We also have the Light Framework running and it works well). We already checked the roles, worksets, pages and iViews permissions and couldnt found any problem. We checked also the frameworks, and it's everything ok.
    Some important items:
    - We have a customized default framework page.
    - We have a custom theme.
    - The issue is happening with the customized components, however we did the tests on the standard components and the same error occurred.
    My System:
    J2EE Engine 6.40 PatchLevel 108290.313
    Portal 6.0.20.0.0
    Does anyone can help me to find a solution or already experiencied something like this?
    Thanks so much,
    Armando Martines Neto
    Edited by: Armando Martines Neto on Jan 23, 2008 5:48 PM

    More information,
    Today I Replaced the .par files : com.sap.portal.navigation.detailedtree and com.sap.portal.layouts.framework restarted the server but the problem istill happening. also I created a new desktop with new theme and framework (all copied from standard) ... but the navigation panel still not showing the links. any suggestion?

  • TK Actions Panel Not Showing

    I purchased the TK Actions/Video set from GoodLight.us. It comes with a set of Actions : "TKActions" which have been installed as directed into the CS5 Actions folder. They appear when Actions is opened and appear to function correctly. However, the Panel from the same set will not show in "Extentions"on the CS 5 page and it is supposed to as listed in the directions. It was copied/pasted in Plug-ins/Panel in Cs 5's program files.
    I have updated the flash player since there was mention of Flash in some applications when I searched for help.
    Any ideas?

    Tony Kuyper Photography—TKActions panel
    http://goodlight.us/writing/actionspanelv3/panelv3.html
    I have been able to speak with tony by phone and by email. I am certain that he will fix your problem.
    From tony to me (partial):
        I'm writing to let you know that I recently posted a new version of the custom actions panel to create luminosity masks on my website: http://goodlight.us/writing/actionspanelv3/panelv3.html
         This update was mandated by Adobe's forthcoming changes to Photoshop CC.  The next revision to PS CC (Photoshop 15), due out in a few weeks, will remove support for Flash-based panels.  The current TK-ACTIONS  and TK_ACTIONS panel use Flash to do their thing and will no longer work in the soon-to-be-released PS CC update.  HTML5 is the new standard for extension panels and is already incorporated into the current version of PS CC.  (Flash will continue to be the standard for Photoshop CS5 and CS6.)  Since I use PS CC and rely on the panel in my own developing workflow, I re-coded the panel using the new HTML5 standard.  This also gave me the opportunity to add some new features to the panel.
         [NOTE: The revised panel has been tested in the current version of Photoshop CC (Photoshop 14) and a pre-release version of the next version of Photoshop CC (Photoshop 15) and works in both.  I have a webpage with preliminary information about installing and using the panel in Photoshop 15:  http://goodlight.us/writing/actionspanelv3/Photoshop-CC-new-version-update.html.  I will update this page as necessary.  Please bookmark it as a reference for additional information.]
         The new panel is called "TKActions" and the link at the top of this email will tell you about it.  Once there you can download the PDF instructions that tell how the panel works and also watch some videos about it at the bottom of the page.  I'm particularly excited about the vids, which were produced by Sean Bagshaw.  I know the panel seems a bit overwhelming at first, so Sean's visual walk-through and practical demonstrations will go a long way towards making people proficient at using it.  Sean has an amazing ability to help students understand even complicated processes, and even though the panel isn't all that complex, I think it is going to be an even more useful tool for many photographers once they watch him use it in the videos.
         Some of the new things in this version of the panel include:
    1)  A new two-tab layout for improved efficiency
    2)  Color-coded sections
    3)  "View" buttons to provide a visual overlay of which pixels are actually selected
    4)  Zone masks that focus adjustments to very narrow tonal ranges
    5)  Web-sharpening actions for vertical and horizontal dimensions and for high-definition dimensions
    6)  Several new buttons to correspond to some techniques discussed in recent blog posts.
    7)  One-click live selections (instead of Ctrl/Cmd-clicking a mask)
    8)  New buttons for creating adjustment layers and changing blending modes
    9)  Simplified subtracted mask generation
    10)  "Progressive actions" for experimenting with many different options
         There are actually two versions of the panel in the download, one that works in Photoshop CC (HTML5 version) and one that works in Photoshop CS5/CS6 (Flash version).  So even if you haven't converted to Photoshop CC, the Flash version still provides access to the improved functions for Photoshop CS5/CS6.  Both versions are included in the download.
    vince

  • Spry Accordian Panel not showing?? What am I missing?

    http://www.neighbor.org/plan_giving2.htm
    Take a look at the last accordian panel, it is not showing fully, but you can still click on it depending in what browser.  How do I adjust it to show fully - The Planned Giving Council Tab.
    Thanks,
    TD

    I'm not seeing the problem on any of my browsers, but I see you have built the page in Frames, which are an old technology, and a little hard to troubleshoot from here.
    It could be that the height of your Accordion is falling deeper than the Browser Viewport, then being hidden by the bottom of the Frame. Try shortening up the accordion; there could be a little space taken out between the accordion tabs.
    Beth

Maybe you are looking for